gitmodules: switch to qemu.org qboot mirror

QEMU now hosts a mirror of qboot.git. QEMU mirrors third-party code to
ensure that users can always build QEMU even if the dependency goes
offline and so

gitmodules: switch to qemu.org qboot mirror

QEMU now hosts a mirror of qboot.git. QEMU mirrors third-party code to
ensure that users can always build QEMU even if the dependency goes
offline and so QEMU meets its responsibilities to provide full source
code under software licenses.

Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200915130834.706758-2-stefanha@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200914-1' into staging

* hw/misc/a9scu: Do not allow invalid CPU count
* hw/misc/a9scu: Minor cleanups
* hw/timer/armv7m_syst

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200914-1' into staging

* hw/misc/a9scu: Do not allow invalid CPU count
* hw/misc/a9scu: Minor cleanups
* hw/timer/armv7m_systick: assert that board code set system_clock_scale
* decodetree: Improve identifier matching
* target/arm: Clean up neon fp insn size field decode
* target/arm: Remove KVM support for 32-bit Arm hosts
* hw/arm/mps2: New board models mps2-an386, mps2-an500
* Deprecate Unicore32 port
* Deprecate lm32 port
* target/arm: Count PMU events when MDCR.SPME is set
* hw/arm: versal-virt: Correct the tx/rx GEM clocks
* New Nuvoton iBMC board models npcm750-evb, quanta-gsj

# gpg: Signature made Mon 14 Sep 2020 16:02:06 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200914-1: (32 commits)
tests/acceptance: console boot tests for quanta-gsj
docs/system: Add Nuvoton machine documentation
hw/arm/npcm7xx: add board setup stub for CPU and UART clocks
hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj
hw/ssi: NPCM7xx Flash Interface Unit device model
hw/mem: Stubbed out NPCM7xx Memory Controller model
hw/nvram: NPCM7xx OTP device model
hw/arm: Load -bios image as a boot ROM for npcm7xx
roms: Add virtual Boot ROM for NPCM7xx SoCs
hw/arm: Add two NPCM7xx-based machines
hw/arm: Add NPCM730 and NPCM750 SoC models
hw/timer: Add NPCM7xx Timer device model
hw/misc: Add NPCM7xx Clock Controller device model
hw/misc: Add NPCM7xx System Global Control Registers device model
hw/arm: versal-virt: Correct the tx/rx GEM clocks
target/arm: Count PMU events when MDCR.SPME is set
Deprecate lm32 port
Deprecate Unicore32 port
docs/system/arm/mps2.rst: Make board list consistent
hw/arm/mps2: New board model mps2-an500
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

roms: Add virtual Boot ROM for NPCM7xx SoCs

This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and

roms: Add virtual Boot ROM for NPCM7xx SoCs

This is a minimalistic boot ROM written specifically for use with QEMU.
It supports loading the second-stage loader from SPI flash into RAM, SMP
boot, and not much else.

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-7-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

New build system, with "fake in-tree builds" support.

Missing:
* converting configure tests
* converting unit te

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

New build system, with "fake in-tree builds" support.

Missing:
* converting configure tests
* converting unit tests
* converting some remaining parts of the installation

# gpg: Signature made Fri 21 Aug 2020 11:33:35 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (152 commits)
docs: convert build system documentation to rST
meson: update build-system documentation
meson: avoid unstable module warning with Meson 0.56.0 or newer
meson: convert po/
meson: convert VNC and dependent libraries to meson
meson: move SDL and SDL-image detection to meson
meson: convert sample plugins
meson: replace create-config with meson configure_file
rules.mak: drop unneeded macros
meson: convert check-block
meson: build texi doc
docs: automatically track manual dependencies
meson: sphinx-build
remove Makefile.target
rules.mak: remove version.o
meson: convert systemtap files
configure: place compatibility symlinks in target directories
meson: link emulators without Makefile.target
meson: plugins
meson: cpu-emu
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

build-sys: add meson submodule

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200203' into staging

ppc patch queue 2020-02093

This pull request supersedes ppc-for-5.0-20200131. The only changes
are one extra p

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200203' into staging

ppc patch queue 2020-02093

This pull request supersedes ppc-for-5.0-20200131. The only changes
are one extra patch to suppress some irritating warnings during tests
under TCG, and an extra Tested-by in one of the other patches.

Here's the next batch of patches for ppc and associated machine types.
Highlights includes:
* Remove the deprecated "prep" machine type and its OpenHackware
firmware
* Add TCG emulation of the msgsndp etc. supervisor privileged
doorbell instructions
* Allow "pnv" machine type to run Hostboot style firmwares
* Add a virtual TPM device for spapr machines
* Implement devices for POWER8 PHB3 and POWER9 PHB4 host bridges for
the pnv machine type
* Use faster Spectre mitigation by default for POWER9 DD2.3 machines
* Introduce Firmware Assisted NMI dump facility for spapr machines
* Fix a performance regression with load/store multiple instructions
in TCG

as well as some other assorted cleanups and fixes.

# gpg: Signature made Mon 03 Feb 2020 03:30:24 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-5.0-20200203: (35 commits)
tests: Silence various warnings with pseries
target/ppc: Use probe_write for DCBZ
target/ppc: Remove redundant mask in DCBZ
target/ppc: Use probe_access for LMW, STMW
target/ppc: Use probe_access for LSW, STSW
ppc: spapr: Activate the FWNMI functionality
migration: Include migration support for machine check handling
ppc: spapr: Handle "ibm,nmi-register" and "ibm,nmi-interlock" RTAS calls
target/ppc: Build rtas error log upon an MCE
target/ppc: Handle NMI guest exit
ppc: spapr: Introduce FWNMI capability
Wrapper function to wait on condition for the main loop mutex
target/ppc/cpu.h: Put macro parameter in parentheses
spapr: Enable DD2.3 accelerated count cache flush in pseries-5.0 machine
ppc/pnv: change the PowerNV machine devices to be non user creatable
ppc/pnv: Add models for POWER8 PHB3 PCIe Host bridge
ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
docs/specs/tpm: reST-ify TPM documentation
hw/ppc/Kconfig: Enable TPM_SPAPR as part of PSERIES config
tpm_spapr: Support suspend and resume
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

hw/ppc/prep: Remove the deprecated "prep" machine and the OpenHackware BIOS

It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.

Reviewed-by: Philippe Mathieu-Daud

hw/ppc/prep: Remove the deprecated "prep" machine and the OpenHackware BIOS

It's been deprecated since QEMU v3.1. The 40p machine should be
used nowadays instead.

Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200114114617.28854-1-thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Bulgarian translation update (Alexander)
* RTC and PC refactorings (Hervé, Philippe, Sergio)
* RTC fix (Marcelo)
* Mor

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Bulgarian translation update (Alexander)
* RTC and PC refactorings (Hervé, Philippe, Sergio)
* RTC fix (Marcelo)
* More comprehensive MCE logging (Mario)
* x86 IGNNE implementation (Paolo)
* Microvm machine type (Sergio)
* Support for UMONITOR/UMWAIT/TPAUSE (Tao)
* Do not use %m in common code (Thomas)
* NoNonArchitecturalCoreSharing Hyper-V enlightenment (Vitaly)
* getpagesize cleanups (Wei)

# gpg: Signature made Sat 26 Oct 2019 14:39:56 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (39 commits)
i386: implement IGNNE
target/i386: introduce cpu_set_fpus
target/i386: move FERR handling to target/i386
core: replace getpagesize() with qemu_real_host_page_size
audio: fix missing break
mc146818rtc: always register rtc to rtc list
mc146818rtc: Include mc146818rtc_regs.h directly in mc146818rtc.c
mc146818rtc: Move RTC_ISA_IRQ definition
mc146818rtc: move structure to header file
hw/i386/pc: Remove kvm_i386.h include
hw/i386/pc: Extract pc_i8259_create()
hw/i386/pc: Move gsi_state creation code
hw/i386/pc: Extract pc_gsi_create()
target/i386: Add support for save/load IA32_UMWAIT_CONTROL MSR
x86/cpu: Add support for UMONITOR/UMWAIT/TPAUSE
hw/timer/mc146818rtc: Only include qapi-commands-misc on I386
runstate: ignore exit request in finish migrate state
checkpatch: suggest qemu_real_host_page_size instead of getpagesize() or sysconf(_SC_PAGESIZE)
MAINTAINERS: add microvm related files
hw/i386: Introduce the microvm machine type
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge commit 'df84f17' into HEAD

This merge fixes a semantic conflict with the trivial tree.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

roms: add microvm-bios (qboot) as binary and git submodule

qboot is a minimalist x86 firmware for booting Linux kernels. It does
the mininum amount of work required for the task, and it's able to
bo

roms: add microvm-bios (qboot) as binary and git submodule

qboot is a minimalist x86 firmware for booting Linux kernels. It does
the mininum amount of work required for the task, and it's able to
boot both PVH images and bzImages without relying on option roms.

This characteristics make it an ideal companion for the microvm
machine type.

Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-rc2' into staging

RISC-V Patches for 4.2-rc2

This contains a pair of patches that add OpenSBI support to QEMU on
RISC-V target

Merge remote-tracking branch 'remotes/palmer/tags/riscv-for-master-4.1-rc2' into staging

RISC-V Patches for 4.2-rc2

This contains a pair of patches that add OpenSBI support to QEMU on
RISC-V targets. The patches have been floating around for a bit, but
everything seems solid now. These pass my standard test of booting
OpenEmbedded, and also works when I swap around the various command-line
arguments to use the new boot method.

# gpg: Signature made Fri 19 Jul 2019 00:54:27 BST
# gpg: using RSA key 00CE76D1834960DFCE886DF8EF4CA1502CCBAB41
# gpg: issuer "palmer@dabbelt.com"
# gpg: Good signature from "Palmer Dabbelt <palmer@dabbelt.com>" [unknown]
# gpg: aka "Palmer Dabbelt <palmer@sifive.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 00CE 76D1 8349 60DF CE88 6DF8 EF4C A150 2CCB AB41

* remotes/palmer/tags/riscv-for-master-4.1-rc2:
hw/riscv: Load OpenSBI as the default firmware
roms: Add OpenSBI version 0.4

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

roms: Add OpenSBI version 0.4

Add OpenSBI version 0.4 as a git submodule and as a prebult binary.

OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source
reference implementation

roms: Add OpenSBI version 0.4

Add OpenSBI version 0.4 as a git submodule and as a prebult binary.

OpenSBI (https://github.com/riscv/opensbi) aims to provide an open-source
reference implementation of the RISC-V Supervisor Binary Interface (SBI)
specifications for platform-specific firmwares executing in M-mode. For all
supported platforms, OpenSBI provides several runtime firmware examples.
These example firmwares can be used to replace the legacy riscv-pk bootloader
and enable the use of well-known bootloaders such as U-Boot.

OpenSBI is distributed under the terms of the BSD 2-clause license
("Simplified BSD License" or "FreeBSD License", SPDX: BSD-2-Clause). OpenSBI
source code also contains code reused from other projects desribed here:
https://github.com/riscv/opensbi/blob/master/ThirdPartyNotices.md.

In this case all of the code we are using from OpenSBI is BSD 2-clause
as we aren't using the Kendryte code (Apache-2.0) with QEMU and libfdt
is dual licensed as BSD 2-clause (and GPL-2.0+). OpenSBI isn't being
linked with QEMU either it is just being included with QEMU.

Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>

show more ...

gitmodules: use qemu.org git mirrors

qemu.org hosts git repository mirrors of all submodules. Update
.gitmodules to use the mirrors and not the upstream repositories.

Mirroring upstream repositori

gitmodules: use qemu.org git mirrors

qemu.org hosts git repository mirrors of all submodules. Update
.gitmodules to use the mirrors and not the upstream repositories.

Mirroring upstream repositories ensures that QEMU continues to build
even when upstream repositories are deleted or temporarily offline.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190425145420.8888-1-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp: move slirp as git submodule project

Marc-André Lureau (2):
build-sys: pass CFLAGS & LDFLAGS to subdir-slir

Merge remote-tracking branch 'remotes/thibault/tags/samuel-thibault' into staging

slirp: move slirp as git submodule project

Marc-André Lureau (2):
build-sys: pass CFLAGS & LDFLAGS to subdir-slirp
build-sys: move slirp as git submodule project

# gpg: Signature made Thu 02 May 2019 23:20:52 BST
# gpg: using RSA key E61DBB15D4172BDEC97E92D9DB550E89F0FA54F3
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>" [unknown]
# gpg: aka "Samuel Thibault <sthibault@debian.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@gnu.org>" [unknown]
# gpg: aka "Samuel Thibault <samuel.thibault@inria.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@labri.fr>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@ens-lyon.org>" [marginal]
# gpg: aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>" [unknown]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 900C B024 B679 31D4 0F82 304B D017 8C76 7D06 9EE6
# Subkey fingerprint: E61D BB15 D417 2BDE C97E 92D9 DB55 0E89 F0FA 54F3

* remotes/thibault/tags/samuel-thibault:
build-sys: move slirp as git submodule project
build-sys: pass CFLAGS & LDFLAGS to subdir-slirp

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

build-sys: move slirp as git submodule project

The slirp project is now hosted on freedesktop at:
https://gitlab.freedesktop.org/slirp.

The libslirp source was extracted from qemu/slirp filtered th

build-sys: move slirp as git submodule project

The slirp project is now hosted on freedesktop at:
https://gitlab.freedesktop.org/slirp.

The libslirp source was extracted from qemu/slirp filtered through
clang-format (available in project tree). The qemu slirp directory can
be swapped by a git submodule.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190424110041.8175-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>

show more ...

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux ho

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

pci, pc, virtio: fixes, cleanups, tests

Lots of work on tests: BiosTablesTest UEFI app,
vhost-user testing for non-Linux hosts.
Misc cleanups and fixes all over the place

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 22 Feb 2019 15:51:40 GMT
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (26 commits)
pci: Sanity test minimum downstream LNKSTA
hw/smbios: fix offset of type 3 sku field
pci: Move NVIDIA vendor id to the rest of ids
virtio-balloon: Safely handle BALLOON_PAGE_SIZE < host page size
virtio-balloon: Use ram_block_discard_range() instead of raw madvise()
virtio-balloon: Rework ballon_page() interface
virtio-balloon: Corrections to address verification
virtio-balloon: Remove unnecessary MADV_WILLNEED on deflate
i386/kvm: ignore masked irqs when update msi routes
contrib/vhost-user-blk: fix the compilation issue
Revert "contrib/vhost-user-blk: fix the compilation issue"
pc-dimm: use same mechanism for [get|set]_addr
tests/data: introduce "uefi-boot-images" with the "bios-tables-test" ISOs
tests/uefi-test-tools: add build scripts
tests: introduce "uefi-test-tools" with the BiosTablesTest UEFI app
roms: build the EfiRom utility from the roms/edk2 submodule
roms: add the edk2 project as a git submodule
vhost-user-test: create a temporary directory per TestServer
vhost-user-test: small changes to init_hugepagefs
vhost-user-test: create a main loop per TestServer
...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

roms: add the edk2 project as a git submodule

The roms/edk2 submodule can help with three goals:
- build the OVMF and ArmVirtQemu virtual UEFI firmware platforms (to be
implemented later),
- build

roms: add the edk2 project as a git submodule

The roms/edk2 submodule can help with three goals:
- build the OVMF and ArmVirtQemu virtual UEFI firmware platforms (to be
implemented later),
- build the EfiRom tool on the fly, which is used in roms/Makefile, for
building the "efirom" target,
- build UEFI test applications (to be run in guests), for qtest support.

Edk2 commit 85588389222a3636baf0f9ed8227f2434af4c3f9 stands for the latest
"stable tag", namely "edk2-stable201811".

The edk2 repository tracks some binary files that should not be removed by
QEMU's top-level "make clean"; exempt the full pathnames from the "find"
command.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Shannon Zhao <shannon.zhaosl@gmail.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190204160325.4914-2-lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>

show more ...

gitmodules: use 'https://' instead of 'git://'

When you clone the repository without previous commit history, 'git://'
doesn't protect from man-in-the-middle attacks. HTTPS is more secure
since the

gitmodules: use 'https://' instead of 'git://'

When you clone the repository without previous commit history, 'git://'
doesn't protect from man-in-the-middle attacks. HTTPS is more secure
since the client verifies the server certificate.

Also change git.qemu-project.org to git.qemu.org (we control both domain
names but qemu.org is used more widely).

Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181108111531.30671-5-stefanha@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/rth/tags/pull-fpu-20181005' into staging

Testing infrastructure for softfpu (not run by default).
Drop countLeadingZeros.
Fix div_floats.
Add udiv_qrnnd special

Merge remote-tracking branch 'remotes/rth/tags/pull-fpu-20181005' into staging

Testing infrastructure for softfpu (not run by default).
Drop countLeadingZeros.
Fix div_floats.
Add udiv_qrnnd specializations for x86_64, s390x, ppc64 hosts.

# gpg: Signature made Fri 05 Oct 2018 19:00:09 BST
# gpg: using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-fpu-20181005:
softfloat: Specialize udiv_qrnnd for ppc64
softfloat: Specialize udiv_qrnnd for s390x
softfloat: Specialize udiv_qrnnd for x86_64
softfloat: Fix division
softfloat: Replace countLeadingZeros32/64 with clz32/64
tests/fp/fp-test: add floating point tests
gitmodules: add berkeley's softfloat + testfloat version 3
softfloat: remove float64_trunc_to_int

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

gitmodules: add berkeley's softfloat + testfloat version 3

These are BSD-licensed so we can add them as submodules.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <

gitmodules: add berkeley's softfloat + testfloat version 3

These are BSD-licensed so we can add them as submodules.

Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

show more ...

Merge remote-tracking branch 'remotes/kraxel/tags/seabios-1.11.2-20180702-pull-request' into staging

seabios: update to release 1.11.2, add/update configuration.
vgabios: remove (old unused lgpl'ed

Merge remote-tracking branch 'remotes/kraxel/tags/seabios-1.11.2-20180702-pull-request' into staging

seabios: update to release 1.11.2, add/update configuration.
vgabios: remove (old unused lgpl'ed vgabios).
ramfb,bochs-display: use new vgabios roms.

# gpg: Signature made Mon 02 Jul 2018 16:42:06 BST
# gpg: using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/seabios-1.11.2-20180702-pull-request:
ramfb: enable vgabios
bochs-display: enable vgabios
seabios: update bios and vgabios binaries
vgabios: remove submodule and build rules.
seabios: enable ide dma
seabios: add vga configs for bochs-display and ramfb
seabios: update submodule to release 1.11.2

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

vgabios: remove submodule and build rules.

It's the old, lgpl vgabios implementation.

Was left in as fallback when we switched to seavgabios, so we could
easily switch back in case we see regressio

vgabios: remove submodule and build rules.

It's the old, lgpl vgabios implementation.

Was left in as fallback when we switched to seavgabios, so we could
easily switch back in case we see regressions. It's unused since years
now, reportedly doesn't even build, and lacks support for recently (and
not so recently) added display devices.

Zap it.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

show more ...

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180410' into staging

ppc patch queue 2018-04-10

Here's a rather late pull request with a handful of fixes for 2.12.
These have been

Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180410' into staging

ppc patch queue 2018-04-10

Here's a rather late pull request with a handful of fixes for 2.12.
These have been blocked for some time, because I wasn't able to
complete my usual test set due to the SCSI problem fixed in 37c5174
"scsi-disk: Don't enlarge min_io_size to max_io_size".

Since we're in hard freeze, these are all bugfixes. Most are also
regressions, although in one case it's only a "regression" because a
longstanding bug has been exposed by a new machine type (sam460ex) in
the testcases. There are also a couple of sam460ex fixes that aren't
regressions since the board didn't exist before. On the flipside
though, they're low risk because they only touch board specific code
for a board that doesn't exist in any released version.

# gpg: Signature made Tue 10 Apr 2018 08:13:52 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392

* remotes/dgibson/tags/ppc-for-2.12-20180410:
roms/u-boot-sam460ex: Change to qemu git mirror and update
sam460ex: Fix timer frequency and clock multipliers
tests/boot-serial: Test the sam460ex board
spapr: Initialize reserved areas list in FDT in H_CAS handler
target/ppc: Fix backwards migration of msr_mask
hw/misc/macio: Fix crash when listing device properties of macio device
target/ppc: Initialize lazy_tlb_flush correctly

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

show more ...

roms/u-boot-sam460ex: Change to qemu git mirror and update

Now that we have a mirror of this repo on git.qemu.org change the
submodule to use that and update it to latest commit which fixes a
dangli

roms/u-boot-sam460ex: Change to qemu git mirror and update

Now that we have a mirror of this repo on git.qemu.org change the
submodule to use that and update it to latest commit which fixes a
dangling symlink and removes two big binaries that are not needed.

Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>

show more ...

gitmodules: Use the QEMU mirror of qemu-palcode

We have a mirror of the qemu-palcode repository on
git.qemu.org; use that instead of the upstream github,
in line with our general policy of keeping a

gitmodules: Use the QEMU mirror of qemu-palcode

We have a mirror of the qemu-palcode repository on
git.qemu.org; use that instead of the upstream github,
in line with our general policy of keeping and using
a mirror for submodules.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180319131743.3885-1-peter.maydell@linaro.org

show more ...