perf session: Fix loading of compressed data split across adjacent records

Fix decompression failure found during the loading of compressed trace
collected on larger scale systems (>48 c

perf session: Fix loading of compressed data split across adjacent records

Fix decompression failure found during the loading of compressed trace
collected on larger scale systems (>48 cores).

The error happened due to lack of decompression space for a mmaped
buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records.

$ perf report -i bt.16384.data --stats
failed to decompress (B): 63869 -> 0 : Destination buffer is too small
user stack dump failure
Can't parse sample, err = -14
0x2637e436 [0x4080]: failed to process type: 9
Error:
failed to process sample

$ perf test 71
71: Zstd perf.data compression/decompression : Ok

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf report: Implement perf.data record decompression

zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.

perf report: Implement perf.data record decompression

zstd_init(, comp_level = 0) initializes decompression part of API only
hat now consists of zstd_decompress_stream() function.

The perf.data PERF_RECORD_COMPRESSED records are decompressed using
zstd_decompress_stream() function into a linked list of mmaped memory
regions of mmap_comp_len size (struct decomp).

After decompression of one COMPRESSED record its content is iterated and
fetched for usual processing. The mmaped memory regions with
decompressed events are kept in the linked list till the tool process
termination.

When dumping raw records (e.g., perf report -D --header) file offsets of
events from compressed records are printed as zero.

Committer notes:

Since now we have support for processing PERF_RECORD_COMPRESSED, we see
none, in raw form, like we saw in the previous patch commiter notes,
they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc}
records, we only see the stats for those PERF_RECORD_COMPRESSED events,
and since I used the file generated in the commiter notes for the
previous patch, there they are, 2 compressed records:

$ perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -z2 sleep 1
$ perf report -D | grep COMPRESS
COMPRESSED events: 2
COMPRESSED events: 0
$ perf report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 15 of event 'cycles:u'
# Event count (approx.): 962227
#
# Overhead Command Shared Object Symbol
# ........ ....... ................ ...........................
#
46.99% sleep libc-2.28.so [.] _dl_addr
29.24% sleep [unknown] [k] 0xffffffffaea00a67
16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1
5.92% sleep ld-2.28.so [.] _dl_setup_hash
1.40% sleep libc-2.28.so [.] __nanosleep
0.00% sleep [unknown] [k] 0xffffffffaea00163

#
# (Tip: To see callchains in a more compact form: perf report -g folded)
#
$

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf record: Implement compression for serial trace streaming

Compression is implemented using the functions from zstd.c. As the
memory to operate on the compression uses mmap->data buff

perf record: Implement compression for serial trace streaming

Compression is implemented using the functions from zstd.c. As the
memory to operate on the compression uses mmap->data buffer.

If Zstd streaming compression API fails for some reason the data to be
compressed are just copied into the memory buffers using plain memcpy().

Compressed trace frame consists of an array of PERF_RECORD_COMPRESSED
records. Each element of the array is not longer that
PERF_SAMPLE_MAX_SIZE and consists of perf_event_header followed by the
compressed chunk that is decompressed on the loading stage.

Comitter notes:

Undo some unnecessary line breaks, remove some unnecessary () around
zstd_data to then just get its address, and fix conflicts with
BPF_PROG_INFO/BPF_BTF patchkits.

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/744df43f-3932-2594-ddef-1e99a3cad03a@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf session: Define 'bytes_transferred' and 'bytes_compressed' metrics

Define 'bytes_transferred' and 'bytes_compressed' metrics to calculate
ratio in the end of the data collection:

perf session: Define 'bytes_transferred' and 'bytes_compressed' metrics

Define 'bytes_transferred' and 'bytes_compressed' metrics to calculate
ratio in the end of the data collection:

compression ratio = bytes_transferred / bytes_compressed

The 'bytes_transferred' metric accumulates the amount of bytes that was
extracted from the mmaped kernel buffers for compression, while
'bytes_compressed' accumulates the amount of bytes that was received
after applying compression.

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1d4bf499-cb03-26dc-6fc6-f14fec7622ce@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Remove perf_tool from event_op2

Now that we keep a perf_tool pointer inside perf_session, there's no
need to have a perf_tool argument in the event_op2 callback. Remove it.

perf tools: Remove perf_tool from event_op2

Now that we keep a perf_tool pointer inside perf_session, there's no
need to have a perf_tool argument in the event_op2 callback. Remove it.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180913125450.21342-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'perf-core-for-mingo-4.15-20171117' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

Merge tag 'perf-core-for-mingo-4.15-20171117' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Optimize sample parsing for ordering events, where we don't need to parse
all the PERF_SAMPLE_ bits, just the ones leading to the timestamp needed
to reorder events (Jiri Olsa)

- Use a dummy event to ask for PERF_RECORD_{MMAP,COMM,EXEC} with
'perf record --delay', when the events asked by the user will only be
enabled after the workload is started and the requested delay passes,
so we need to add the dummy event and have it .enabled_on_exec. This
then allows us to resolve symbols for the DSO executable MMAPs setup
while we wait for the delay (Arnaldo Carvalho de Melo)

- Synchronize kcmp.h and prctl.h ABI headers wrt SPDX tags (Arnaldo Carvalho de Melo)

- Generalize the annotation code to support other source information
besides objdump/DWARF obtained ones, starting with python scripts,
that will is slated to be merged soon (Jiri Olsa)

- Advance the source code lines to right after the column with the
address in asm lines (Jiri Olsa)

- Fix terminal dimensions resizing signal handling in 'perf top --stdio' (Jiri Olsa)

- Improve error messages for PMU events (Kim Phillips)

- Fix 'perf record' -c/-F options for cpu event aliases (Andi Kleen)

- Enable type checking for perf_evsel_config_term types (Andi Kleen)

- Call machine__exit() at 'perf trace' exit, so as to remove temporary
files related to VDSO (Andrei Vagin)

- Add "reject" option to parse-events.l, fixing the build with newer
flex releases. Noticed with flex 2.6.4 on Alpine Linux 3.6 and Edge (Jiri Olsa)

- Document some missing perf.data headers (Andi Kleen)

- Allow printing period for non freq mod groups (Andi Kleen)

- Do not warn the user about kernel.kptr_restrict when not sampling the
kernel (Arnaldo Carvalho de Melo)

- Fix bug in 'perf help' introduced during conversion to strstart() (Namhyung Kim)

- Do not truncate ASM instruction mnemonics at 6 characters in the annotation
output, PowerPC has long ones (Ravi Bangoria)

- Document some missing command line options (Sihyeon Jang)

- Update POWER9 vendor event tables (Sukadev Bhattiprolu)

- Fix 'perf test' shell entries on s390x, where the 'openat' syscall
is used instead of 'open' in one of the tests and

- No need to use overwrite mmap mode in 'perf test', those tests
do not generate massive amount of events to fill the ring buffer (Wang Nan)

- Add missing command line options (mostly --force/-f) to the man pages (Sihyeon Jang)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

perf ordered_events: Pass timestamp arg in perf_session__queue_event

There's no need to pass whole sample data, because it's only timestamp
that is used.

Signed-off-by: Jiri Ols

perf ordered_events: Pass timestamp arg in perf_session__queue_event

There's no need to pass whole sample data, because it's only timestamp
that is used.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-xd1hpoze3kgb1rb639o3vehb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:

Kernel:

Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:

Kernel:

- kprobes updates: use better W^X patterns for code modifications,
improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook)

- core fixes: event timekeeping (enabled/running times statistics)
fixes, perf_event_read() locking fixes and cleanups, etc. (Peter
Zijlstra)

- Extend x86 Intel free-running PEBS support and support x86
user-register sampling in perf record and perf script. (Andi Kleen)

Tooling:

- Completely rework the way inline frames are handled. Instead of
querying for the inline nodes on-demand in the individual tools, we
now create proper callchain nodes for inlined frames. (Milian
Wolff)

- 'perf trace' updates (Arnaldo Carvalho de Melo)

- Implement a way to print formatted output to per-event files in
'perf script' to facilitate generate flamegraphs, elliminating the
need to write scripts to do that separation (yuzhoujian, Arnaldo
Carvalho de Melo)

- Update vendor events JSON metrics for Intel's Broadwell, Broadwell
Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown,
Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi
Kleen, Kan Liang)

- Multithread the synthesizing of PERF_RECORD_ events for
pre-existing threads in 'perf top', speeding up that phase, greatly
improving the user experience in systems such as Intel's Knights
Mill (Kan Liang)

- Introduce the concept of weak groups in 'perf stat': try to set up
a group, but if it's not schedulable fallback to not using a group.
That gives us the best of both worlds: groups if they work, but
still a usable fallback if they don't. E.g: (Andi Kleen)

- perf sched timehist enhancements (David Ahern)

- ... various other enhancements, updates, cleanups and fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits)
kprobes: Don't spam the build log with deprecation warnings
arm/kprobes: Remove jprobe test case
arm/kprobes: Fix kretprobe test to check correct counter
perf srcline: Show correct function name for srcline of callchains
perf srcline: Fix memory leak in addr2inlines()
perf trace beauty kcmp: Beautify arguments
perf trace beauty: Implement pid_fd beautifier
tools include uapi: Grab a copy of linux/kcmp.h
perf callchain: Fix double mapping al->addr for children without self period
perf stat: Make --per-thread update shadow stats to show metrics
perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
perf tools: Add perf_data_file__write function
perf tools: Add struct perf_data_file
perf tools: Rename struct perf_data_file to perf_data
perf script: Print information about per-event-dump files
perf trace beauty prctl: Generate 'option' string table from kernel headers
tools include uapi: Grab a copy of linux/prctl.h
perf script: Allow creating per-event dump files
perf evsel: Restore evsel->priv as a tool private area
perf script: Use event_format__fprintf()
...

show more ...

Merge branch 'linus' into locking/core, to resolve conflicts

Conflicts:
include/linux/compiler-clang.h
include/linux/compiler-gcc.h
include/linux/compiler

Merge branch 'linus' into locking/core, to resolve conflicts

Conflicts:
include/linux/compiler-clang.h
include/linux/compiler-gcc.h
include/linux/compiler-intel.h
include/uapi/linux/stddef.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'linus' into perf/core, to fix conflicts

Conflicts:
tools/perf/arch/arm/annotate/instructions.c
tools/perf/arch/arm64/annotate/instructions.c

Merge branch 'linus' into perf/core, to fix conflicts

Conflicts:
tools/perf/arch/arm/annotate/instructions.c
tools/perf/arch/arm64/annotate/instructions.c
tools/perf/arch/powerpc/annotate/instructions.c
tools/perf/arch/s390/annotate/instructions.c
tools/perf/arch/x86/tests/intel-cqm.c
tools/perf/ui/tui/progress.c
tools/perf/util/zlib.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

perf tools: Rename struct perf_data_file to perf_data

Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_

perf tools: Rename struct perf_data_file to perf_data

Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

Please do not apply this to mainline directly, instead please re-run the
coccinel

locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()

Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.

For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.

However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:

----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()

// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch

virtual patch

@ depends on patch @
expression E1, E2;
@@

- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)

@ depends on patch @
expression E;
@@

- ACCESS_ONCE(E)
+ READ_ONCE(E)
----

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

perf tools: Use just forward declarations for struct thread where possible

Removing various instances of unnecessary includes, reducing the maze of
header dependencies.

Link: ht

perf tools: Use just forward declarations for struct thread where possible

Removing various instances of unnecessary includes, reducing the maze of
header dependencies.

Link: http://lkml.kernel.org/n/tip-hwu6eyuok9pc57alookyzmsf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Add include <linux/kernel.h> where ARRAY_SIZE() is used

To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.

Cc: Adrian

perf tools: Add include <linux/kernel.h> where ARRAY_SIZE() is used

To pave the way for further cleanups where linux/kernel.h may stop being
included in some header.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Move some methods from session.[ch] to evsel.[ch]

Those were converted to be evsel methods long ago, move the
source to where it belongs.

Cc: Adrian Hunter <adrian.h

perf evsel: Move some methods from session.[ch] to evsel.[ch]

Those were converted to be evsel methods long ago, move the
source to where it belongs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vja8rjmkw3gd5ungaeyb5s2j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Allow unresolved symbol names to be printed as addresses

The fprintf_sym() and fprintf_callchain() methods now allow users to
change the existing behaviour of showing "[unkno

perf evsel: Allow unresolved symbol names to be printed as addresses

The fprintf_sym() and fprintf_callchain() methods now allow users to
change the existing behaviour of showing "[unknown]" as the name of
unresolved symbols to instead show "[0x123456]", i.e. its address.

The current patch doesn't change tools to use this facility, the results
from 'perf trace' and 'perf script' cotinue like:

70.109 ( 0.001 ms): qemu-system-x8/10153 poll(ufds: 0x7f2d93ffe870, nfds: 1) = 0 Timeout
[unknown] (/usr/lib64/libc-2.22.so)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
start_thread+0xca (/usr/lib64/libpthread-2.22.so)
__clone+0x6d (/usr/lib64/libc-2.22.so)

The next patch will make 'perf trace' use the new formatting.

Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fja1ods5vqpg42mdz09xcz3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Rename print_ip() to fprintf_sym()

As it receives a FILE, and its more than just the IP, which can even be
requested not to be printed.

For consistency with other si

perf evsel: Rename print_ip() to fprintf_sym()

As it receives a FILE, and its more than just the IP, which can even be
requested not to be printed.

For consistency with other similar methods in tools/perf/, name it as
perf_evsel__fprintf_sym() and make it return the number of bytes
printed, just like 'fprintf(3)'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-84gawlqa3lhk63nf0t9vnqnn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Allow passing a left alignment when printing a symbol

For callchains, etc where we want it to align just below the syscall
name, for instance, in 'perf trace'

Cc: Ad

perf evsel: Allow passing a left alignment when printing a symbol

For callchains, etc where we want it to align just below the syscall
name, for instance, in 'perf trace'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uk9ekchd67651c625ltaur5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf evsel: Allow specifying a file to output in perf_evsel__print_ip

As this function will be used in 'perf trace'.

Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.or

perf evsel: Allow specifying a file to output in perf_evsel__print_ip

As this function will be used in 'perf trace'.

Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-8x297v9utnxq77onikevvlse@git.kernel.org
[ Split from a larger patch ]
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>

show more ...

perf tools: Add time conversion event

Intel PT uses the time members from the perf_event_mmap_page to convert
between TSC and perf time.

Due to a lack of foresight when Intel PT

perf tools: Add time conversion event

Intel PT uses the time members from the perf_event_mmap_page to convert
between TSC and perf time.

Due to a lack of foresight when Intel PT was implemented, those time
members were recorded in the (implementation dependent) AUXTRACE_INFO
event, the structure of which is generally inaccessible outside of the
Intel PT decoder. However now the conversion between TSC and perf time
is needed when processing a jitdump file when Intel PT has been used for
tracing.

So add a user event to record the time members. 'perf record' will
synthesize the event if the information is available. And session
processing will put a copy of the event on the session so that tools
like 'perf inject' can easily access it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1457426324-30158-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Make perf_session__register_idle_thread drop the refcount

Note that since the thread was already inserted to the session
list, it will be released when the session is release

perf tools: Make perf_session__register_idle_thread drop the refcount

Note that since the thread was already inserted to the session
list, it will be released when the session is released.
Also, in perf_session__register_idle_thread() failure path,
the thread should be put before returning.

Refcnt debugger shows that the perf_session__register_idle_thread
gets the returned thread, but the caller (__cmd_top) does not
put the returned idle thread.

----
==== [0] ====
Unreclaimed thread@0x24e6240
Refcount +1 => 0 at
./perf(thread__new+0xe5) [0x4c8a75]
./perf(machine__findnew_thread+0x9a) [0x4bbdba]
./perf(perf_session__register_idle_thread+0x28) [0x4c63c8]
./perf(cmd_top+0xd7d) [0x43cf6d]
./perf() [0x47ba35]
./perf(main+0x617) [0x4225b7]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5]
./perf() [0x42272d]
Refcount +1 => 1 at
./perf(thread__get+0x2c) [0x4c8bcc]
./perf(machine__findnew_thread+0xee) [0x4bbe0e]
./perf(perf_session__register_idle_thread+0x28) [0x4c63c8]
./perf(cmd_top+0xd7d) [0x43cf6d]
./perf() [0x47ba35]
./perf(main+0x617) [0x4225b7]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5]
./perf() [0x42272d]
Refcount +1 => 2 at
./perf(thread__get+0x2c) [0x4c8bcc]
./perf(machine__findnew_thread+0x112) [0x4bbe32]
./perf(perf_session__register_idle_thread+0x28) [0x4c63c8]
./perf(cmd_top+0xd7d) [0x43cf6d]
./perf() [0x47ba35]
./perf(main+0x617) [0x4225b7]
/lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5]
./perf() [0x42272d]
----

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20151209021122.10245.69707.stgit@localhost.localdomain
[ Drop the refcount in perf_session__register_idle_thread() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf top: Register idle thread

The perf top didn't add the idle/swapper thread to the machine's thread
list and its comm was displayed as ':0'. Fix it.

Signed-off-by: Namhyung

perf top: Register idle thread

The perf top didn't add the idle/swapper thread to the machine's thread
list and its comm was displayed as ':0'. Fix it.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1443577526-3240-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Add AUX area tracing index

Add an index of AUX area tracing events within a perf.data file.

perf record uses a special user event PERF_RECORD_FINISHED_ROUND to
enabl

perf tools: Add AUX area tracing index

Add an index of AUX area tracing events within a perf.data file.

perf record uses a special user event PERF_RECORD_FINISHED_ROUND to
enable sorting of events in chunks instead of having to sort all events
altogether.

AUX area tracing events contain data that can span back to the very
beginning of the recording period. i.e. they do not obey the rules of
PERF_RECORD_FINISHED_ROUND.

By adding an index, AUX area tracing events can be found in advance and
the PERF_RECORD_FINISHED_ROUND approach works as usual.

The index is recorded with the auxtrace feature in the perf.data file.
A session reads the index but does not process it. An AUX area decoder
can queue all the AUX area data in advance using
auxtrace_queues__process_index() or otherwise process the index in some
custom manner.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1430404667-10593-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf session: Add instruction tracing options

It is assumed that AUX area decoding will synthesize events for
consumption by other tools.

At this time, the main use of AUX area

perf session: Add instruction tracing options

It is assumed that AUX area decoding will synthesize events for
consumption by other tools.

At this time, the main use of AUX area tracing will be to capture
instruction trace (aka processor trace) data.

The nature of instruction tracing suggests the initial inclusion of
options for "instructions" and "branches" events, but more could be
added as needed.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1428594864-29309-10-git-send-email-adrian.hunter@intel.com
[ Added ref to tools/perf/Documentation/perf-script.txt describing what is parsed ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...