perf tools: Remove dependency on libnewt

Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
trace

perf tools: Remove dependency on libnewt

Now that the map browser shares the input routine with the hists
browser, there is no need for using any libnewt routine, so remove all
traces except for honouring NO_NEWT=1 on the makefile command line as an
indication that TUI support is not needed, in fact it just sets
NO_SLANG=1.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-wae5o7xca9m52bj1re28jc5j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf annotate browser: Read perf config file for settings

The defaults are:

[annotate]

hide_src_code = false
use_offset = true
jump_arrows =

perf annotate browser: Read perf config file for settings

The defaults are:

[annotate]

hide_src_code = false
use_offset = true
jump_arrows = true
show_nr_jumps = false

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-q4egci70rjgxh7bogbbfpcyf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf annotate browser: More clearly separate columns

The first column (columns in the near future) are for the per line event
overhead(s), that only appear when they are not zero.

perf annotate browser: More clearly separate columns

The first column (columns in the near future) are for the per line event
overhead(s), that only appear when they are not zero.

To clearly separate it, add back a solid vertical line, with just one
colour, not influenced by the per line overheads.

Then have the addr/offset column, then optionally the dynamic
(static in the future) jump->target arrows, if 'j' enables it.

Then the instructions.

Requested-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-r415t4sps0oyr9y8kd9j7clz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf ui browser: Introduce routine to draw vertical line

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: N

perf ui browser: Introduce routine to draw vertical line

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-umb4jlu0ee8r2rc3x4jkahgk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf ui browser: Add method to draw up/down arrow line

It figures out the direction and draws downwards arrows too if that is
the case.

Cc: David Ahern <dsahern@gmail.com>
C

perf ui browser: Add method to draw up/down arrow line

It figures out the direction and draws downwards arrows too if that is
the case.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-tg329nr7q4dg9d0tl3o0wywg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf annotate browser: Initial loop detection

Simple algorithm, just look for the next backward jump that points to
before the cursor.

Then draw an arrow connecting the jump to

perf annotate browser: Initial loop detection

Simple algorithm, just look for the next backward jump that points to
before the cursor.

Then draw an arrow connecting the jump to its target.

Do this as you move the cursor, entering/exiting possible loops.

Ex (graph chars replaced to avoid mail encoding woes):

avc_has_perm_flags
0.00 | nopl 0x0(%rax)
5.36 |+-> 68: mov (%rax),%rax
5.15 || test %rax,%rax
0.00 || v je 130
2.96 || 74: cmp -0x20(%rax),%ebx
47.38 || lea -0x20(%rax),%rcx
0.28 || ^ jne 68
3.16 || cmp -0x18(%rax),%dx
0.00 |+------^ jne 68
4.92 | cmp 0x4(%rcx),%r13d
0.00 | v jne 68
1.15 | test %rcx,%rcx
0.00 | v je 130

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5gairf6or7dazlx3ocxwvftm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

ui browser: Add method to write graphical characters

To save typing on the switch char set slang stuff.

It also helps in removing more slang direct calls, wrapping them at the
u

ui browser: Add method to write graphical characters

To save typing on the switch char set slang stuff.

It also helps in removing more slang direct calls, wrapping them at the
ui_browser level, where at some point I'll try to implement those in
terms of GTK+.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-63yhb2htv9g3g1olmojzptkd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

perf tools: Move UI bits to tools/perf/ui directory

Move those files to new directory in order to be prepared to further UI
work. Makefile and header file pathes are adjusted accordingly

perf tools: Move UI bits to tools/perf/ui directory

Move those files to new directory in order to be prepared to further UI
work. Makefile and header file pathes are adjusted accordingly.

Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl
Link: http://lkml.kernel.org/r/1333523666-12057-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...