ASoC: rsnd: get ssi/scu from rsnd_dai_stream

Current driver is assuming that SSI id = SCU id.
But, now, it can get correct SSI/SCU from
rsnd_dai_stream. use it.

Signed-off-by: Kuninori Morimoto <ku

ASoC: rsnd: get ssi/scu from rsnd_dai_stream

Current driver is assuming that SSI id = SCU id.
But, now, it can get correct SSI/SCU from
rsnd_dai_stream. use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: use mod array instead of list on rdai

struct rsnd_dai_stream used list for mod list.
It added only odd flexibility to current driver, and
it is a factor which makes extendibility difficu

ASoC: rsnd: use mod array instead of list on rdai

struct rsnd_dai_stream used list for mod list.
It added only odd flexibility to current driver, and
it is a factor which makes extendibility difficult.
rsnd use mod array instead of list from now.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: run rsnd_path_init() when probe() timing

Current rsnd SSIU/SSI/SCU/SRU path is set
when playback/capture starts up.
But it is meaningless method, since the path is based
on platform and

ASoC: rsnd: run rsnd_path_init() when probe() timing

Current rsnd SSIU/SSI/SCU/SRU path is set
when playback/capture starts up.
But it is meaningless method, since the path is based
on platform and can be set in probe() timing.
This patch sets the path on probe() timing.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: unify rdai naming

struct rsnd_dai is called as "rdai",
but its size has been called as "dai_nr".
Unify these as "rdai"

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com

ASoC: rsnd: unify rdai naming

struct rsnd_dai is called as "rdai",
but its size has been called as "dai_nr".
Unify these as "rdai"

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: remove verbose function parameter

priv has rcar_snd_info pointer.
having priv and info in same time is verbose.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signe

ASoC: rsnd: remove verbose function parameter

priv has rcar_snd_info pointer.
having priv and info in same time is verbose.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: move rsnd_mod_call() macro

core.c is the only user of rsnd_mod_call() macro.
Move it to core.c from rsnd.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off

ASoC: rsnd: move rsnd_mod_call() macro

core.c is the only user of rsnd_mod_call() macro.
Move it to core.c from rsnd.h

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: set DIV_EN register on rsnd_adg_set_convert_clk_gen2()

DIV_EN register enable bit is required when you use Gen2 SRC

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
S

ASoC: rsnd: set DIV_EN register on rsnd_adg_set_convert_clk_gen2()

DIV_EN register enable bit is required when you use Gen2 SRC

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: tidyup original for_each_rsnd_xxx macro

Current for_each_rsnd_xxx macro will read out-of-array's
memory after last loop operation.
It was not good C language operation, and the binary wh

ASoC: rsnd: tidyup original for_each_rsnd_xxx macro

Current for_each_rsnd_xxx macro will read out-of-array's
memory after last loop operation.
It was not good C language operation, and the binary which was
compiled by (at least) gcc 4.8.1 is broken
This patch tidyup these issues

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: add Gen2 SRC and DMAEngine support

Renesas sound Gen2 has SRC (= Sampling Rate Converter)
which needs 2 DMAC.
The data path image when you use SRC on Gen2 is

[mem] -> Audio-DMAC -> SRC

ASoC: rsnd: add Gen2 SRC and DMAEngine support

Renesas sound Gen2 has SRC (= Sampling Rate Converter)
which needs 2 DMAC.
The data path image when you use SRC on Gen2 is

[mem] -> Audio-DMAC -> SRC -> Audio-DMAC-peri-peri -> SSIU -> SSI

This patch support SRC and DMAEnine.
It is tested on R-Car H2 Lager board

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: remove SSI dependent DMAEngine callback

Renesas Gen2 sound will use 2 DMAC
which are Audio-DMAC, and Audio-DMAC-peri-peri.
Current driver has callback function for each DMAC,
because it

ASoC: rsnd: remove SSI dependent DMAEngine callback

Renesas Gen2 sound will use 2 DMAC
which are Audio-DMAC, and Audio-DMAC-peri-peri.
Current driver has callback function for each DMAC,
because it assumed each DMAC needs special settings.
But it became clear that these can share settings.
This patch removes unnecessary callback

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: extracts Gen1/Gen2 common parts

Renesas sound IP Gen1/Gen2 are similar, but different.
This patch extracts Gen1/Gen2 common and dependency parts,
and create Gen1/Gen2 ops to control it.

ASoC: rsnd: extracts Gen1/Gen2 common parts

Renesas sound IP Gen1/Gen2 are similar, but different.
This patch extracts Gen1/Gen2 common and dependency parts,
and create Gen1/Gen2 ops to control it.

According to this structure, SSIU setup which
has been implemented on ssi.c can be moved to scu.c
(SRU/SSIU/SCU should be implemented on scu.c)

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: add rsnd_ssi_is_play()

SCU needs SSI direction if Gen2.
Add rsnd_ssi_is_play() function for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark B

ASoC: rsnd: add rsnd_ssi_is_play()

SCU needs SSI direction if Gen2.
Add rsnd_ssi_is_play() function for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: merge SRC clock timing/setting

SRC clock and timing setting register
exist in SRU and ADG on Gen1.
But, these are merged into ADG on Gen2.
Current driver is supporting Gen1 SRC only
at t

ASoC: rsnd: merge SRC clock timing/setting

SRC clock and timing setting register
exist in SRU and ADG on Gen1.
But, these are merged into ADG on Gen2.
Current driver is supporting Gen1 SRC only
at this point, but, above settings are
set as different function.
This patch merges these as preparation of Gen2 support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: rsnd_scu_hpbif_is_enable() become macro

rsnd_scu_hpbif_is_enable() is used only scu.c now.
It can be local macro

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Sign

ASoC: rsnd: rsnd_scu_hpbif_is_enable() become macro

rsnd_scu_hpbif_is_enable() is used only scu.c now.
It can be local macro

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: remove duplicate *priv from rsnd_dma

*priv pointer exists under rsnd_mod,
and, it can get rsnd_mod pointer from rsnd_dma.
remove duplicate rsnd_dma :: priv

Signed-off-by: Kuninori Morim

ASoC: rsnd: remove duplicate *priv from rsnd_dma

*priv pointer exists under rsnd_mod,
and, it can get rsnd_mod pointer from rsnd_dma.
remove duplicate rsnd_dma :: priv

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: remove ssiu from ssi.c

Now, SSI_MODE0/1 are controlled under scu.c
ssiu is no longer needed on ssi.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: M

ASoC: rsnd: remove ssiu from ssi.c

Now, SSI_MODE0/1 are controlled under scu.c
ssiu is no longer needed on ssi.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: SSI_MODE0/1 settings goes to scu.c

SRU (Gen1) / SCU (Gen2) / SSIU (Gen2) are controlled under scu.c.
(SCU + SSIU (Gen2) was SRU (Gen1))
And register of SSI_MODE0/1 are mapped on these IP

ASoC: rsnd: SSI_MODE0/1 settings goes to scu.c

SRU (Gen1) / SCU (Gen2) / SSIU (Gen2) are controlled under scu.c.
(SCU + SSIU (Gen2) was SRU (Gen1))
And register of SSI_MODE0/1 are mapped on these IP.
But these have been implemented under ssi.c on this driver.
The naming is very confusable,
but it should be implemented under scu.c

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: rsnd_dai_is_clk_master() can be shared

Current rsnd driver is using ssi local
rsnd_rdai_is_clk_master() for checking clock master.
But it can be rsnd_dai_is_clk_master(), and share in ea

ASoC: rsnd: rsnd_dai_is_clk_master() can be shared

Current rsnd driver is using ssi local
rsnd_rdai_is_clk_master() for checking clock master.
But it can be rsnd_dai_is_clk_master(), and share in each file

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: cleanup debug information method

rsnd_mod debug information is implemented
in each callback functions now.
But, it can be implemented in rsnd_mod_call(),
and share this code.
This patch

ASoC: rsnd: cleanup debug information method

rsnd_mod debug information is implemented
in each callback functions now.
But, it can be implemented in rsnd_mod_call(),
and share this code.
This patch adds it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: tidyup register naming of BUSIF_MODE

Gen1:SRU has only 1 BUSIF_MODE,
but Gen2:SSIU/SCU has SRCm_BUSIF_MODE, and SSIn_BUSIF_MODE.
This patch rename current BUSIF_MODE to SRC_BUSIF_MODE.

ASoC: rsnd: tidyup register naming of BUSIF_MODE

Gen1:SRU has only 1 BUSIF_MODE,
but Gen2:SSIU/SCU has SRCm_BUSIF_MODE, and SSIn_BUSIF_MODE.
This patch rename current BUSIF_MODE to SRC_BUSIF_MODE.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: add SRC (Sampling Rate Converter) support

This patch adds SRC support to Renesas sound driver.
SRC converts sampling rate between codec <-> cpu.
It needs special codec chip,
or very simp

ASoC: rsnd: add SRC (Sampling Rate Converter) support

This patch adds SRC support to Renesas sound driver.
SRC converts sampling rate between codec <-> cpu.
It needs special codec chip,
or very simple DA/AD converter to use it.
This patch was tested via ak4554 codec,
and supports Gen1 only at this point.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: INT_ENABLE is needed only Gen2

INT_ENABLE is needed only Gen2.
rsnd_mod_write() do nothing on Gen1, but it is confusable.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.

ASoC: rsnd: INT_ENABLE is needed only Gen2

INT_ENABLE is needed only Gen2.
rsnd_mod_write() do nothing on Gen1, but it is confusable.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: route setting is needed only Gen1

Renesas sound has SRC (= Sampling Rate Converter),
but, the HW implementation depends on its generation.
It was part of SRU on Gen1, and SCU on Gen2.
Th

ASoC: rsnd: route setting is needed only Gen1

Renesas sound has SRC (= Sampling Rate Converter),
but, the HW implementation depends on its generation.
It was part of SRU on Gen1, and SCU on Gen2.
This SCU needs DMA transfer to use it.
Current rsnd driver is using it as DMA transfer buffer
(= no rate convert), and Gen1 is only supported at this point.

This patch cleanup it with focusing about SRC and Gen2 part.

rsnd_scu_set_route() is needed only Gen1.

This patch renames it to rsnd_scu_set_route_if_gen1()
and it adds comment to rsnd_reg member
in order to clarify it is used for Gen1.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rsnd: tidyup register naming

Use correct register name which appears in the datasheet

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@li

ASoC: rsnd: tidyup register naming

Use correct register name which appears in the datasheet

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

ASoC: rcar: add Gen2 sound support

This patch adds Gen2 sound support for Renesas R-Car.
But, it is supporting PIO transfer only at this point

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx

ASoC: rcar: add Gen2 sound support

This patch adds Gen2 sound support for Renesas R-Car.
But, it is supporting PIO transfer only at this point

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...