#
5ab0862e |
| 05-Jun-2014 |
Arnd Bergmann <arnd@arndb.de> |
ASoC: MMP audio needs sram support
From e7a94bb7fb871c73cc85712d89c1f48d0271c1be Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd@arndb.de> Date: Thu, 5 Jun 2014 12:31:28 +0200 Subject: [PATCH] AS
ASoC: MMP audio needs sram support
From e7a94bb7fb871c73cc85712d89c1f48d0271c1be Mon Sep 17 00:00:00 2001 From: Arnd Bergmann <arnd@arndb.de> Date: Thu, 5 Jun 2014 12:31:28 +0200 Subject: [PATCH] ASoC: MMP audio needs sram support
Building the pxa/mmp audio driver without support for the mmp sram driver enabled results in this link error:
sound/built-in.o: In function `mmp_pcm_free_dma_buffers': :(.text+0x3e734): undefined reference to `sram_get_gpool' sound/built-in.o: In function `mmp_pcm_new': :(.text+0x3e7c0): undefined reference to `sram_get_gpool'
The sram driver is cannot be manually enabled and needs to be turned on by selecting MMP_SRAM from each module that needs it, which is what this patch does.
Ideally, MMP should move over to the generic SRAM support, but for the moment, we can avoid the build error.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
show more ...
|
#
38784764 |
| 03-Jun-2014 |
Arnd Bergmann <arnd@arndb.de> |
ASoC: pxa: add I2C dependencies as needed
We have in the past added 'depends on I2C' for some of the PXA boards after hitting randconfig build bugs. I have seens a couple of new bugs in this area du
ASoC: pxa: add I2C dependencies as needed
We have in the past added 'depends on I2C' for some of the PXA boards after hitting randconfig build bugs. I have seens a couple of new bugs in this area during the linux-next cycle for 3.16, after it became possible to build some more PXA machines with I2C disabled.
To shut this up for good, this adds the dependency to every board that uses I2C as the interface to the codec. I have gone through all board files and verified that they all either use AC97 or I2C, and this annotates the latter. Some of these already enable I2C from mach-pxa/Kconfig, but since that can change it's better to be explicit here.
The link error that can result otherwise happens when CONFIG_I2C is set to 'm' and the codec driver is built-in as a result of being selected by the platform specific glue.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@linaro.org>
show more ...
|
Revision tags: v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4 |
|
#
482b91c7 |
| 29-Apr-2014 |
Arnd Bergmann <arnd@arndb.de> |
ASoC: pxa: TTC DKB audio needs I2C
The missing dependency can lead to build errors, so make it explicit in Kconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia@
ASoC: pxa: TTC DKB audio needs I2C
The missing dependency can lead to build errors, so make it explicit in Kconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
show more ...
|
Revision tags: v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5 |
|
#
48b752ac |
| 17-Dec-2013 |
Qiao Zhou <zhouqiao@marvell.com> |
ASoC: mmp-pcm: config pcm slave via generic dmaengine
use snd_dmaengine_pcm_prepare_slave_config to set slave config, and remove the max_burst_size = 4 hard code.
select SND_SOC_GENERIC_DMAENGINE_P
ASoC: mmp-pcm: config pcm slave via generic dmaengine
use snd_dmaengine_pcm_prepare_slave_config to set slave config, and remove the max_burst_size = 4 hard code.
select SND_SOC_GENERIC_DMAENGINE_PCM for mmp-pcm.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@linaro.org>
show more ...
|
Revision tags: v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3, v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6 |
|
#
b7ae6f31 |
| 12-Aug-2013 |
Daniel Mack <zonque@gmail.com> |
ALSA: move dmaengine implementation from ASoC to ALSA core
For the PXA DMA rework, we need the generic dmaengine implementation that currently lives in sound/soc for standalone (non-ASoC) AC'97 supp
ALSA: move dmaengine implementation from ASoC to ALSA core
For the PXA DMA rework, we need the generic dmaengine implementation that currently lives in sound/soc for standalone (non-ASoC) AC'97 support.
Move it to sound/core, and rename the Kconfig symbol.
Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
show more ...
|
Revision tags: v3.11-rc5, v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10, v3.10-rc7, v3.10-rc6, v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2 |
|
#
7ae6871f |
| 14-May-2013 |
Paul Bolle <pebolle@tiscali.nl> |
ASoC: remove saarb and tavorevb3 machine drivers
Support for PXA95x was removed in v3.8. This means that the Kconfig symbols MACH_SAARB and MACH_TAVOREVB3 are no longer available. This leaves the So
ASoC: remove saarb and tavorevb3 machine drivers
Support for PXA95x was removed in v3.8. This means that the Kconfig symbols MACH_SAARB and MACH_TAVOREVB3 are no longer available. This leaves the SoC Audio support for Marvell Saarb and Marvell Tavor EVB3 unbuildable. Remove these drivers too.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v3.10-rc1, v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7, v3.7-rc6, v3.7-rc5, v3.7-rc4, v3.7-rc3, v3.7-rc2, v3.7-rc1, v3.6, v3.6-rc7, v3.6-rc6, v3.6-rc5, v3.6-rc4, v3.6-rc3, v3.6-rc2, v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6, v3.5-rc5, v3.5-rc4, v3.5-rc3 |
|
#
b883f363 |
| 11-Jun-2012 |
Qiao Zhou <zhouqiao@marvell.com> |
ASoC: add ttc-dkb machine support
add ttc-dkb machine support for pxa910. It uses 88pm8607 as codec dai, mmp-pcm as platform and pxa-ssp as cpu dai.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com>
ASoC: add ttc-dkb machine support
add ttc-dkb machine support for pxa910. It uses 88pm8607 as codec dai, mmp-pcm as platform and pxa-ssp as cpu dai.
Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
#
5ebf20ae |
| 11-Jun-2012 |
Zhangfei Gao <zhangfei.gao@marvell.com> |
ASoC: add mmp brownstone support
Adds Alsa audio platform driver for mmp brownstone machine
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Leo Yan <leoy@marvell.com> Signed-o
ASoC: add mmp brownstone support
Adds Alsa audio platform driver for mmp brownstone machine
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Leo Yan <leoy@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
#
fa375d42 |
| 11-Jun-2012 |
Zhangfei Gao <zhangfei.gao@marvell.com> |
ASoC: mmp: add sspa support
The SSPA is a configurable multi-channel audio serial (TDM) interface. It's configurable at runtime to support up to 128 channels and the number of bits per sample: 8, 12
ASoC: mmp: add sspa support
The SSPA is a configurable multi-channel audio serial (TDM) interface. It's configurable at runtime to support up to 128 channels and the number of bits per sample: 8, 12, 16, 20, 24 and 32 bits. It also support stereo format: I2S, left-justified or right-justified.
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Leo Yan <leoy@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
#
7a824e21 |
| 11-Jun-2012 |
Zhangfei Gao <zhangfei.gao@marvell.com> |
ASoC: mmp: add audio dma support
mmp-pcm handle audio dma based on soc-dmaengine Support mmp and pxa910
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Leo Yan <leoy@marvell.c
ASoC: mmp: add audio dma support
mmp-pcm handle audio dma based on soc-dmaengine Support mmp and pxa910
Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Leo Yan <leoy@marvell.com> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v3.5-rc2, v3.5-rc1, v3.4, v3.4-rc7, v3.4-rc6, v3.4-rc5, v3.4-rc4, v3.4-rc3, v3.4-rc2, v3.4-rc1, v3.3, v3.3-rc7, v3.3-rc6, v3.3-rc5, v3.3-rc4, v3.3-rc3, v3.3-rc2, v3.3-rc1, v3.2, v3.2-rc7, v3.2-rc6, v3.2-rc5 |
|
#
b971c370 |
| 04-Dec-2011 |
Axel Lin <axel.lin@gmail.com> |
ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700
SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make
ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700
SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make SND_SOC_RAUMFELD depend on I2C && SPI_MASTER.
Add depend on SPI_MASTER to fix below build error if CONFIG_SPI_MASTER is not selected.
LD .tmp_vmlinux1 sound/built-in.o: In function `ak4104_spi_write': last.c:(.text+0x290cc): undefined reference to `spi_sync' sound/built-in.o: In function `ak4104_probe': last.c:(.text+0x292a0): undefined reference to `spi_write_then_read' sound/built-in.o: In function `ak4104_spi_probe': last.c:(.text+0x29398): undefined reference to `spi_setup' sound/built-in.o: In function `ak4104_init': last.c:(.init.text+0x4ec): undefined reference to `spi_register_driver' make: *** [.tmp_vmlinux1] Error 1
Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/cs4270.o sound/soc/codecs/cs4270.c: In function 'cs4270_i2c_probe': sound/soc/codecs/cs4270.c:657: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/cs4270.c: In function 'cs4270_init': sound/soc/codecs/cs4270.c:730: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/cs4270.c: In function 'cs4270_exit': sound/soc/codecs/cs4270.c:736: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/cs4270.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2
SND_PXA2XX_SOC_HX4700 selects SND_SOC_AK4641 which needs CONFIG_I2C. Thus make SND_PXA2XX_SOC_HX4700 depend on I2C.
Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/ak4641.o sound/soc/codecs/ak4641.c: In function 'ak4641_modinit': sound/soc/codecs/ak4641.c:646: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/ak4641.c: In function 'ak4641_exit': sound/soc/codecs/ak4641.c:656: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/ak4641.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v3.2-rc4, v3.2-rc3, v3.2-rc2, v3.2-rc1, v3.1, v3.1-rc10 |
|
#
b29a33a2 |
| 12-Oct-2011 |
Axel Lin <axel.lin@gmail.com> |
ASoC: Make SND_SOC_SAARB and SND_SOC_TAVOREVB3 select MFD_88PM860X
In saarb_pm860x_init() and evb3_pm860x_init(), we call pm860x_hs_jack_detect() and pm860x_mic_jack_detect() which in turn calls pm8
ASoC: Make SND_SOC_SAARB and SND_SOC_TAVOREVB3 select MFD_88PM860X
In saarb_pm860x_init() and evb3_pm860x_init(), we call pm860x_hs_jack_detect() and pm860x_mic_jack_detect() which in turn calls pm860x_set_bits(). Thus make SND_SOC_SAARB and SND_SOC_TAVOREVB3 select MFD_88PM860X.
This patch fixes below build error if CONFIG_MFD_88PM860X is not configured.
LD .tmp_vmlinux1 sound/built-in.o: In function `pm860x_write_reg_cache': last.c:(.text+0x29e9c): undefined reference to `pm860x_reg_write' sound/built-in.o: In function `pm860x_set_bias_level': last.c:(.text+0x29ecc): undefined reference to `pm860x_set_bits' last.c:(.text+0x29f00): undefined reference to `pm860x_reg_write' last.c:(.text+0x29f18): undefined reference to `pm860x_reg_write' sound/built-in.o: In function `pm860x_read_reg_cache': last.c:(.text+0x29f40): undefined reference to `pm860x_reg_read' sound/built-in.o: In function `pm860x_probe': last.c:(.text+0x2a034): undefined reference to `pm860x_bulk_read' sound/built-in.o: In function `pm860x_codec_handler': last.c:(.text+0x2a344): undefined reference to `pm860x_reg_read' last.c:(.text+0x2a354): undefined reference to `pm860x_reg_read' sound/built-in.o: In function `pm860x_mic_jack_detect': last.c:(.text+0x2a450): undefined reference to `pm860x_set_bits' sound/built-in.o: In function `pm860x_hs_jack_detect': last.c:(.text+0x2a4d0): undefined reference to `pm860x_set_bits' last.c:(.text+0x2a4f8): undefined reference to `pm860x_set_bits' last.c:(.text+0x2a510): undefined reference to `pm860x_set_bits' make: *** [.tmp_vmlinux1] Error 1
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v3.1-rc9, v3.1-rc8, v3.1-rc7, v3.1-rc6, v3.1-rc5, v3.1-rc4, v3.1-rc3, v3.1-rc2, v3.1-rc1, v3.0, v3.0-rc7, v3.0-rc6, v3.0-rc5, v3.0-rc4, v3.0-rc3, v3.0-rc2, v3.0-rc1, v2.6.39 |
|
#
c26f642e |
| 18-May-2011 |
Dmitry Artamonow <mad_soft@inbox.ru> |
ASoC: add iPAQ hx4700 machine driver
AK4641 connected via I2S and I2C, jack detection via GPIO.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Artamonow <mad_soft@inbo
ASoC: add iPAQ hx4700 machine driver
AK4641 connected via I2S and I2C, jack detection via GPIO.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v2.6.39-rc7, v2.6.39-rc6, v2.6.39-rc5, v2.6.39-rc4, v2.6.39-rc3, v2.6.39-rc2, v2.6.39-rc1, v2.6.38, v2.6.38-rc8, v2.6.38-rc7, v2.6.38-rc6, v2.6.38-rc5, v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7, v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4 |
|
#
846172df |
| 24-Nov-2010 |
Dmitry Artamonow <mad_soft@inbox.ru> |
ASoC: fix SND_PXA2XX_LIB Kconfig warning
Fix following warning observed when SND_PXA2XX_SOC is set and SND_ARM isn't:
warning: (SND_PXA2XX_AC97 && SOUND && !M68K && SND && SND_ARM && ARCH_PXA || SN
ASoC: fix SND_PXA2XX_LIB Kconfig warning
Fix following warning observed when SND_PXA2XX_SOC is set and SND_ARM isn't:
warning: (SND_PXA2XX_AC97 && SOUND && !M68K && SND && SND_ARM && ARCH_PXA || SND_PXA2XX_SOC && SOUND && !M68K && SND && SND_SOC && ARCH_PXA) selects SND_PXA2XX_LIB which has unmet direct dependencies (SOUND && !M68K && SND && SND_ARM)
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2 |
|
#
b6905d0b |
| 18-Aug-2010 |
Haojian Zhuang <haojian.zhuang@gmail.com> |
ASoC: add saarb machine driver for 88pm860x
88PM860x codec is used in Marvell saarb development board. 88PM860x codec is used as master mode for SSP communication. Only I2S format is supported.
Sig
ASoC: add saarb machine driver for 88pm860x
88PM860x codec is used in Marvell saarb development board. 88PM860x codec is used as master mode for SSP communication. Only I2S format is supported.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
#
b0547a70 |
| 18-Aug-2010 |
Haojian Zhuang <haojian.zhuang@gmail.com> |
ASoC: add tavorevb3 machine driver for 88pm860x
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource
ASoC: add tavorevb3 machine driver for 88pm860x
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v2.6.36-rc1, v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1, v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2 |
|
#
866d091d |
| 16-Mar-2010 |
Eric Miao <eric.y.miao@gmail.com> |
[ARM] pxa: remove incorrect select PXA_SSP in Kconfig
PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select' fr
[ARM] pxa: remove incorrect select PXA_SSP in Kconfig
PXA_SSP is actually used by drivers like drivers/spi/pxa2xx_spi.c and sound/soc/pxa/pxa-ssp.c, not by boards. Remove those incorrect 'select' from Kconfig and make SOC_PXA_SSP to select.
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
show more ...
|
#
d21e0f4c |
| 04-Apr-2010 |
Marek Vasut <marek.vasut@gmail.com> |
ASoC: Zipit Z2 WM8750 ASoC driver
This patch adds support for sound through the WM8750 codec on Zipit Z2. Also, this patch incorporates support for detecting headset jack insertion through the jack
ASoC: Zipit Z2 WM8750 ASoC driver
This patch adds support for sound through the WM8750 codec on Zipit Z2. Also, this patch incorporates support for detecting headset jack insertion through the jack detection API.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v2.6.34-rc1, v2.6.33, v2.6.33-rc8 |
|
#
f9efc9df |
| 09-Feb-2010 |
Eric Miao <eric.y.miao@gmail.com> |
ASoC: Remove legacy SSP API usage from pxa-ssp.c
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
|
#
a056bef4 |
| 08-Feb-2010 |
Eric Miao <eric.y.miao@gmail.com> |
[ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
|
Revision tags: v2.6.33-rc7, v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32 |
|
#
49af574b |
| 27-Nov-2009 |
Daniel Mack <daniel@caiaq.de> |
ALSA: ARM: add Raumfeld audio support
Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
Revision tags: v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5 |
|
#
640fb39e |
| 14-Oct-2009 |
Igor Grinberg <grinberg@compulab.co.il> |
ASoC: finally enable support for eXeda and CM-X300
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Mark Brown <broonie@opensource.wolfso
ASoC: finally enable support for eXeda and CM-X300
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: alsa-devel@alsa-project.org Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
show more ...
|
Revision tags: v2.6.32-rc4, v2.6.32-rc3 |
|
#
c877c251 |
| 01-Oct-2009 |
Takashi Iwai <tiwai@suse.de> |
ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2
wm8940 requires I2C.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Revision tags: v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6, v2.6.30-rc5, v2.6.30-rc4 |
|
#
37330efd |
| 23-Apr-2009 |
Marek Vasut <marek.vasut@gmail.com> |
[ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.miao@marvell.com>
|
#
eaaa5328 |
| 11-May-2009 |
Mike Rapoport <mike@compulab.co.il> |
ASoC: em-x270: make the driver support also eXeda and CM-X300 machines
Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
|