Revision tags: openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4 |
|
#
91c18325 |
| 24-Jun-2016 |
Vedang Patel <vedang.patel@intel.com> |
ASoC: Intel: Skylake: Increase loglevel of debug messages.
There is log spam while doing playback, record or reloading the audio firmware.
print_hex_dump uses printk(KERN_DEBUG,... which is differe
ASoC: Intel: Skylake: Increase loglevel of debug messages.
There is log spam while doing playback, record or reloading the audio firmware.
print_hex_dump uses printk(KERN_DEBUG,... which is different from dev_dbg used elsewhere in the driver: it's always enabled at compile-time. Change it to print_hex_dump_debug for logging consistency.
For consistency with other log statements, change dev_info to dev_dbg for a kernel print which is frequently printed by the driver.
Signed-off-by: Vedang Patel <vedang.patel@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4 |
|
#
721c3e36 |
| 18-Dec-2015 |
Dharageswari.R <dharageswari.r@intel.com> |
ASoC: Intel: Skylake: Use CGCTL.MISCBDCGE for Phrase detection notification
Per HW recommendation, SW shall clear the CGCTL.MISCBDCGE and set it back once data is transferred. So clear this when we
ASoC: Intel: Skylake: Use CGCTL.MISCBDCGE for Phrase detection notification
Per HW recommendation, SW shall clear the CGCTL.MISCBDCGE and set it back once data is transferred. So clear this when we get the IPC and track using a driver flag, and set back on closure
Signed-off-by: Dharageswari.R <dharageswari.r@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: openbmc-20151217-1, openbmc-20151210-1 |
|
#
cce1c7f3 |
| 03-Dec-2015 |
Mousami Jana <mousami.janax@intel.com> |
ASoC: Intel: Skylake: add LARGE_CONFIG_GET IPC support
For messages which have larger payload than mailbox data, we need to split the payload using set of messages containing mailbox size as payload
ASoC: Intel: Skylake: add LARGE_CONFIG_GET IPC support
For messages which have larger payload than mailbox data, we need to split the payload using set of messages containing mailbox size as payload.
For sending such payload we already support LARGE_CONFIG_SET IPCs and now to query such payload add LARGE_CONFIG_GET IPC
Signed-off-by: Mousami Jana <mousami.janax@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
6c5768b3 |
| 03-Dec-2015 |
Dharageswari R <dharageswari.r@intel.com> |
ASoC: Intel: Skylake: Add support for Loadable modules
A module is loaded when the path consisting the module is opened. The module binary(ies) is loaded from file system and cached in kernel memory
ASoC: Intel: Skylake: Add support for Loadable modules
A module is loaded when the path consisting the module is opened. The module binary(ies) is loaded from file system and cached in kernel memory for future use. This is downloaded to DSP using DMA and invoking Load module IPCs
This patch adds support for load/unload module IPCs, DMAing modules and manging the modules
Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1 |
|
#
aaec7e9f |
| 29-Oct-2015 |
Vincent Stehlé <vincent.stehle@laposte.net> |
ASoC: Intel: Skylake: fix typo in sizeof
The size of the pointer to a data structure to send is erroneously passed to sst_ipc_tx_message_wait() as its tx_bytes argument. It should be given the size
ASoC: Intel: Skylake: fix typo in sizeof
The size of the pointer to a data structure to send is erroneously passed to sst_ipc_tx_message_wait() as its tx_bytes argument. It should be given the size of the pointed skl_ipc_dxstate_info structure instead.
Coincidentally, both the pointer and the structure have the same size of 8 bytes on a 64 bit machine, which "masks" the issue. Compiling for 32 bit reveals the issue more clearly.
Fix the typo for correctness, and to make the code robust to future evolutions of the skl_ipc_dxstate_info structure size.
This fixes the following coccicheck error:
sound/soc/intel/skylake/skl-sst-ipc.c:641:8-14: ERROR: application of sizeof to pointer
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Cc: Jeeja KP <jeeja.kp@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: trivial@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: openbmc-20151028-1 |
|
#
84c9e283 |
| 09-Oct-2015 |
Jeeja KP <jeeja.kp@intel.com> |
ASoC: Intel: Skylake: Correct the runtime handler behaviour
On runtime pm resume, we need to download the firmware, also on suspend we need to ensure all the interrupts from controller and DSP are d
ASoC: Intel: Skylake: Correct the runtime handler behaviour
On runtime pm resume, we need to download the firmware, also on suspend we need to ensure all the interrupts from controller and DSP are disabled.
Also since we download the firmware on resume, we don't need to do so on init, so remove that bit
Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2 |
|
#
28f3b6f1 |
| 10-Jul-2015 |
Omair M Abdullah <omair.m.abdullah@intel.com> |
ASoC: Intel: Skylake: Print error code in IPC for SKL
Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vi
ASoC: Intel: Skylake: Print error code in IPC for SKL
Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
a750ba5f |
| 10-Jul-2015 |
Subhransu S. Prusty <subhransu.s.prusty@intel.com> |
ASoC: Intel: Skylake: Add SKL DSP initialization
This adds the dsp and ipc initialization for the Skylake platform. It also requests firmware and uses code loader dma to load it.
Signed-off-by: Sub
ASoC: Intel: Skylake: Add SKL DSP initialization
This adds the dsp and ipc initialization for the Skylake platform. It also requests firmware and uses code loader dma to load it.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
6cb00333 |
| 10-Jul-2015 |
Subhransu S. Prusty <subhransu.s.prusty@intel.com> |
ASoC: Intel: Skylake: Process code loader DMA interrupt
The code loader DMA interrupt is received by main interrupt handler which dispatches it to cldma routines
Signed-off-by: Subhransu S. Prusty
ASoC: Intel: Skylake: Process code loader DMA interrupt
The code loader DMA interrupt is received by main interrupt handler which dispatches it to cldma routines
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
b81fd263 |
| 09-Jul-2015 |
Subhransu S. Prusty <subhransu.s.prusty@intel.com> |
ASoC: Intel: Add Skylake IPC library
This adds base SKL IPC library which uses common SST IPC lib. Here we add definition for IPC types, sending and receiving IPC messages from aDSP, handling interr
ASoC: Intel: Add Skylake IPC library
This adds base SKL IPC library which uses common SST IPC lib. Here we add definition for IPC types, sending and receiving IPC messages from aDSP, handling interrupt, sending different types of messages etc
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14 |
|
#
eb062e47 |
| 06-Oct-2020 |
Cezary Rojewski <cezary.rojewski@intel.com> |
ASoC: Intel: Remove sst_dsp_get_thread_context While sst_dsp_get_thread_context() is declared as solution-agnostic, it is only used by /skylake/ solution. Majority of thread_context fiel
ASoC: Intel: Remove sst_dsp_get_thread_context While sst_dsp_get_thread_context() is declared as solution-agnostic, it is only used by /skylake/ solution. Majority of thread_context field usages are direct accesses. Improve code cohesiveness and convert to single usage model. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@intel.com> Link: https://lore.kernel.org/r/20201006064907.16277-14-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8 |
|
#
36004c42 |
| 08-Aug-2019 |
Cezary Rojewski <cezary.rojewski@intel.com> |
ASoC: Intel: Skylake: large_config_get overhaul LARGE_CONFIG_GET is mainly used to retrieve requested module parameters but it may also carry TX payload with them. Update its implementat
ASoC: Intel: Skylake: large_config_get overhaul LARGE_CONFIG_GET is mainly used to retrieve requested module parameters but it may also carry TX payload with them. Update its implementation to account for both TX and RX data. First reply.header carries total payload size within data_off_sizefield. Make use of reply.header to realloc returned buffer with correct size. Failure of IPC request is permissive - error-payload may be returned, an informative data why GET for given param failed - and thus function should not collapse before entire processing is finished. Caller is responsible for checking returned payload and bytes parameters. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190808181549.12521-3-cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
63e45324 |
| 08-Aug-2019 |
Cezary Rojewski <cezary.rojewski@intel.com> |
ASoC: Intel: Skylake: Limit large_config_get to single frame Reply for the very first LARGE_CONFIG_GET request contains total size of payload to be retrieved by host. From then on, e
ASoC: Intel: Skylake: Limit large_config_get to single frame Reply for the very first LARGE_CONFIG_GET request contains total size of payload to be retrieved by host. From then on, each subsequent reply carries buffer offset instead. As looping is not covered by any real-life example, remove it and cleanup the function for followup overhaul. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190808181549.12521-2-cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3 |
|
#
abf31fee |
| 23-Jul-2019 |
Cezary Rojewski <cezary.rojewski@intel.com> |
ASoC: Intel: Update request-reply IPC model struct ipc_message contains fields: header, tx_data and tx_size which represent TX i.e. request while RX is represented by rx_data and rx_size
ASoC: Intel: Update request-reply IPC model struct ipc_message contains fields: header, tx_data and tx_size which represent TX i.e. request while RX is represented by rx_data and rx_size with reply's header equivalent missing. Reply header may contain some vital information including, but not limited to, received payload size. Some IPCs have entire payload found within RX header instead. Content and value of said header is context dependent and may vary between firmware versions and target platform. Current model does not allow such IPCs to function at all. Rather than appending yet another parameter to an already long list of such for sst_ipc_tx_message_XXXs, declare message container in form of struct sst_ipc_message and add them to parent's ipc_message declaration. Align haswell, baytrail and skylake with updated request-reply model and modify their reply processing functions to save RX header within message container. Despite the range of changes, status quo is achieved. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190723144341.21339-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
bcc2a2dc |
| 23-Jul-2019 |
Cezary Rojewski <cezary.rojewski@intel.com> |
ASoC: Intel: Skylake: Merge skl_sst and skl into skl_dev struct Skylake driver is divided into two modules: - snd_soc_skl - snd_soc_skl_ipc and nothing would be wrong if not
ASoC: Intel: Skylake: Merge skl_sst and skl into skl_dev struct Skylake driver is divided into two modules: - snd_soc_skl - snd_soc_skl_ipc and nothing would be wrong if not for the fact that both cannot exist without one another. IPC module is not some kind of extension, as it is the case for snd_hda_ext_core which is separated from snd_hda_core - legacy hda interface. It's as much core Skylake module as snd_soc_skl is. Statement backed up by existence of circular dependency between this two. To eliminate said problem, struct skl_sst has been created. From that very momment, Skylake has been plagued by header errors (incomplete structs, unknown references etc.) whenever something new is to be added or code is cleaned up. As this design is being corrected, struct skl_sst is no longer needed, so combine it with struct skl. To avoid ambiguity when searching for skl stuff (struct skl *skl) it has also been renamed to skl_dev. No functional changes. Signed-off-by: Piotr Maziarz <piotrx.maziarz@intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20190723145854.8527-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
53c8b29a |
| 26-Jun-2019 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.2-rc6' into asoc-5.3 Linux 5.2-rc6
|
Revision tags: v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10 |
|
#
26ae2049 |
| 13-Jun-2019 |
Gustaw Lewandowski <gustaw.lewandowski@intel.com> |
ASoC: Intel: Fix race condition in IPC rx list Since there are multiple IPCs being sent in a short span of time, there is a possibility of more than one message being on the Rx list afte
ASoC: Intel: Fix race condition in IPC rx list Since there are multiple IPCs being sent in a short span of time, there is a possibility of more than one message being on the Rx list after receiving response from firmware. In such cases, when the first notification of interrupt from firmware is received, driver retrieves the message from the Rx list but does not delete it from the list till the next lock. In the meantime, when another interrupt is received from the firmware, driver is reading the previous message again since the previous message has not been removed from the list. Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
07875939 |
| 13-Jun-2019 |
Cezary Rojewski <cezary.rojewski@intel.com> |
ASoC: Intel: Skylake: Read HIPCT extension before clearing DONE bit Host clears DONE bit to signal IPC target it has completed the operation. Once this is done, IPC target i.e. DSP may p
ASoC: Intel: Skylake: Read HIPCT extension before clearing DONE bit Host clears DONE bit to signal IPC target it has completed the operation. Once this is done, IPC target i.e. DSP may proceed with the next reply, filling registers with new portion of data. Because of this, host should always read all registers prior to clearing DONE and BUSY bits to ensure no desynchronization happens the time in between clearing bits and reading message data (here, extension). Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v5.1.9, v5.1.8 |
|
#
47d7195d |
| 04-Jun-2019 |
Thomas Gleixner <tglx@linutronix.de> |
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it u
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 13 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081205.608593891@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
Revision tags: v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
61f94ee4 |
| 29-Jan-2018 |
Subhransu S. Prusty <subhransu.s.prusty@intel.com> |
ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC If mclk/sclk is already running, FW responds with IPC reply MCLK/SCLK already running. Add these to the IPC reply lookup table.
ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC If mclk/sclk is already running, FW responds with IPC reply MCLK/SCLK already running. Add these to the IPC reply lookup table. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
aa15679b |
| 29-Jan-2018 |
Subhransu S. Prusty <subhransu.s.prusty@intel.com> |
ASoC: Intel: Skylake: Make DSP replies more human readable Add more meaning to the IPC replies for easy debugging. Replace the switch case with a lookup table to lookup for the IPC repli
ASoC: Intel: Skylake: Make DSP replies more human readable Add more meaning to the IPC replies for easy debugging. Replace the switch case with a lookup table to lookup for the IPC replies and print in human readable form. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14, v4.13.5, v4.13 |
|
#
4bdb04f0 |
| 02-Aug-2017 |
Guneshwor Singh <guneshwor.o.singh@intel.com> |
ASoC: Intel: cnl: Unstatify common ipc functions Common ipc functions can be reused for cnl, so make them non-static. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
ASoC: Intel: cnl: Unstatify common ipc functions Common ipc functions can be reused for cnl, so make them non-static. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.12, v4.10.17 |
|
#
5cd1f5c3 |
| 15-May-2017 |
Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> |
ASoC: Intel: Skylake: Fix IPC rx_list corruption In SKL+ platforms, all IPC commands are serialised, i.e. the driver sends a new IPC to DSP, only after receiving a reply from the firmwar
ASoC: Intel: Skylake: Fix IPC rx_list corruption In SKL+ platforms, all IPC commands are serialised, i.e. the driver sends a new IPC to DSP, only after receiving a reply from the firmware for the current IPC. Hence it seems apparent that there is only a single modifier of the IPC RX List. However, during an IPC timeout case in a multithreaded environment, there is a possibility of the list element being deleted two times if not properly protected. So, use spin lock save/restore to prevent rx_list corruption. Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
Revision tags: v4.10.16, v4.10.15, v4.10.14, v4.10.13 |
|
#
b6726009 |
| 25-Apr-2017 |
Sodhi, VunnyX <vunnyx.sodhi@intel.com> |
ASoC: Intel: Skylake: Add loadable module support on KBL platform Kabylake platform expects modules in a library manifest. After loading base firmware library manifest is loaded using lo
ASoC: Intel: Skylake: Add loadable module support on KBL platform Kabylake platform expects modules in a library manifest. After loading base firmware library manifest is loaded using load library IPC. This is followed by module load using load multiple modules IPC. Signed-off-by: Sodhi, VunnyX <vunnyx.sodhi@intel.com> Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|
#
100e7f39 |
| 25-Apr-2017 |
Subhransu S. Prusty <subhransu.s.prusty@intel.com> |
ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version Kabylake uses code loader dma and wait on notification instead of ipc reply for load library ipc status. So modif
ASoC: Intel: Skylake: Modify load_lib_ipc arguments for a nowait version Kabylake uses code loader dma and wait on notification instead of ipc reply for load library ipc status. So modify the argument of skl_sst_ipc_load_library to check on flag to wait for ipc reply. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
show more ...
|