ALSA: oxfw: delayed registration of sound card

Some oxfw based units tends to fail asynchronous communication when
IEEE 1394 bus is under bus-reset state. When registering sound card

ALSA: oxfw: delayed registration of sound card

Some oxfw based units tends to fail asynchronous communication when
IEEE 1394 bus is under bus-reset state. When registering sound card
instance at unit probe callback, userspace applications can be involved
to the state.

This commit postpones the registration till the bus is calm.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: remove needless member from private structure

In former commit, 'struct device_info' is obsoleted, whereas private
structure still keeps a pointer to it.

This commit

ALSA: oxfw: remove needless member from private structure

In former commit, 'struct device_info' is obsoleted, whereas private
structure still keeps a pointer to it.

This commit remove the member.

d6ce6bbd7d83('ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers')

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: allocate own address region for SCS.1 series

When physical controls on SCS.1 models are operated, the models transfer
MIDI messages in asynchronous transactions on IEEE 1394

ALSA: oxfw: allocate own address region for SCS.1 series

When physical controls on SCS.1 models are operated, the models transfer
MIDI messages in asynchronous transactions on IEEE 1394 bus. The models
have a register to have an address for the transactions, and drivers
can register own address for this purpose.

This commit keeps a region of address, registers it and adds a handler for
the transactions.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: add scs1x layer

Stanton Controllers and Systems 1 (SCS.1) series is supported by ALSA
scs1x driver. This driver just supports MIDI functionality. On the other
hand, model

ALSA: oxfw: add scs1x layer

Stanton Controllers and Systems 1 (SCS.1) series is supported by ALSA
scs1x driver. This driver just supports MIDI functionality. On the other
hand, models in this series are based on OXFW971 and ALSA OXFW driver can
support them.

SCS.1 series has MIDI functionality to control its surface state such as
LED lighting. When operating physical knobs and faders, the models
generate MIDI messages. These MIDI messages are transferred by asynchronous
transactions. These transactions are really model-specific and ALSA OXFW
driver requires the functionality so as scs1x module implements.

This commit adds scs1x layer as a preparation to merge scs1x driver to
oxfw driver.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers

In former commits, some model-specific members are split from the
structure. The structure is just t

ALSA: oxfw: rename a structure so that it means backward compatibility to old drivers

In former commits, some model-specific members are split from the
structure. The structure is just to keep names for compatibility to old
drivers.

This commit arranges name of the structure and localize it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: move model-specific parameters from common structure

In previous commit, some members are moved from 'struct snd_oxfw' because
they're model-specific. There are also the othe

ALSA: oxfw: move model-specific parameters from common structure

In previous commit, some members are moved from 'struct snd_oxfw' because
they're model-specific. There are also the other model-specific parameters
in 'struct device_info'.

This commit moves these members to model-specific structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: move model-specific members from common structure

Currently, 'struct snd_oxfw' has some members for models supported by old
firewire-speakers driver, while these members are

ALSA: oxfw: move model-specific members from common structure

Currently, 'struct snd_oxfw' has some members for models supported by old
firewire-speakers driver, while these members are useless to the other
models.

This commit allocates new memory block and moves these members to
model-specific structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: enable to keep memory block for model-specific structure

ALSA oxfw driver should have backward compatibility to old
firewire-speakers driver. Additionally, in future commit,

ALSA: oxfw: enable to keep memory block for model-specific structure

ALSA oxfw driver should have backward compatibility to old
firewire-speakers driver. Additionally, in future commit, scs1x driver
will be merged. It's nice to add a pointer to have a memory block for
model-specific structures.

This commit adds a member to 'struct snd_oxfw' for this aim. Deallocation
is done at freeing ALSA card structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: reuse driver entry to detect quirks

Currently, assignment to model-dependent quirk is corresponding to
asynchronous transactions on IEEE 1394 bus. This is also achieved with

ALSA: oxfw: reuse driver entry to detect quirks

Currently, assignment to model-dependent quirk is corresponding to
asynchronous transactions on IEEE 1394 bus. This is also achieved with
device entry.

This commit changes the processing of model-dependent quirk with the
entry. As a result, the transactions are sent only for Loud models.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: rename local functions for control elements so that they represent as local

This commit renames local functions with prefix 'spkr_', so that they're
for firewire-speakers.

ALSA: oxfw: rename local functions for control elements so that they represent as local

This commit renames local functions with prefix 'spkr_', so that they're
for firewire-speakers.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

Merge branch 'topic/firewire-update' into for-next

ALSA: firewire-lib: add data block processing layer for AM824 format

This commit adds data block processing layer for AM824 format. The new
layer initializes streaming layer with its val

ALSA: firewire-lib: add data block processing layer for AM824 format

This commit adds data block processing layer for AM824 format. The new
layer initializes streaming layer with its value for fmt field.

Currently, most implementation of data block processing still remains
streaming layer. In later commits, these codes will be moved to the layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: firewire-lib: rename 'amdtp' to 'amdtp-stream' to prepare for functional separation

In later commit, data block processing layer will be newly added. This
layer will be named as 'a

ALSA: firewire-lib: rename 'amdtp' to 'amdtp-stream' to prepare for functional separation

In later commit, data block processing layer will be newly added. This
layer will be named as 'amdtp-am824'.

This commit renames current amdtp file to amdtp-stream, to distinguish it
from the new layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: add Mackie Onyx Satellite quirk to inform wrong value in 'dbs' field in tx CIP header

Mackie Onyx Satellite has two usage; standalone and with base station.

These two mo

ALSA: oxfw: add Mackie Onyx Satellite quirk to inform wrong value in 'dbs' field in tx CIP header

Mackie Onyx Satellite has two usage; standalone and with base station.

These two modes has different stream formats. In standalone mode, rx data
block includes 2 Multi Bit Linear Audio (MBLA) data channels and tx data
block includes 2. With base station, they're 6 and 2.

Although, with base station, the actual tx packet include wrong value in
'dbs' field in its CIP header. This quirk causes packet streaming layer to
detect packet discontinuity and to stop PCM substream.

This is a response of 'single' subfunction 'extended stream format
information' command in AV/C Stream Format Information Specification 1.1.
It means that a data block in tx packets includes 2 MBLA data channels.

$ ./firewire-request /dev/fw1 fcp 0x01ffbfc001000000ffffffff
response: 000: 0c ff bf c0 01 00 00 00 ff 00 90 40 03 02 01 02
response: 010: 06

Current OXFW driver parses the response and detects stream formats
correctly.

$ cat /proc/asound/card1/firewire/formation
...
Output Stream from device:
Rate PCM MIDI
* 48000 2 0
44100 2 0
88200 2 0
96000 2 0

On the other hand, in actual tx CIP, the 'dbs' field has 6. But the number
of quadlets in CIP payload is not multiple of 6. Seeing the subtraction of
two successive payload quadlets, it should be multiple of 2.

payload CIP CIP
quadlets header0 header1
24 00060052 9002ffff
24 0006005e 9002ffff
26 0006006a 9002ffff
24 00060077 9002ffff
24 00060083 9002ffff
26 0006008f 9002ffff
24 0006009c 9002ffff
24 000600a8 9002ffff
26 000600b4 9002ffff
24 000600c1 9002ffff

This commit adds support for this quirk to OXFW driver, by using
CIP_WRONG_DBS flag. When this flag is set, packet streaming layer uses
the value of its 'data_block_quadlets' member instead of the value in CIP
header. This value is already set by OXFW driver and no discontinuity is
detected.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Add hwdep interface

This interface is designed for mixer/control application. By using this
interface, an application can get information about firewire node, can
lock/un

ALSA: oxfw: Add hwdep interface

This interface is designed for mixer/control application. By using this
interface, an application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Add support for capture/playback MIDI messages

This commit adds MIDI functionality with an assumption of 'if the device
has MIDI comformant data channels in its stream format

ALSA: oxfw: Add support for capture/playback MIDI messages

This commit adds MIDI functionality with an assumption of 'if the device
has MIDI comformant data channels in its stream formation, the device has
one MIDI port'.

When no streams have already started, MIDI functionality starts stream
with current sampling rate.

When MIDI functionality has already starts some streams and PCM
functionality is going to start streams at different sampling rate,
this driver stops streams once and changes sampling rate, then restarts
streams for both PCM/MIDI substreams.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Add support AMDTP in-stream

Previous commit adds support for some devices which can capture PCM samples.
These devices transmit AMDTP stream in non-blocking mode. This commit

ALSA: oxfw: Add support AMDTP in-stream

Previous commit adds support for some devices which can capture PCM samples.
These devices transmit AMDTP stream in non-blocking mode. This commit adds
functionality to handle AMDTP incoming stream.

OXFW seems to have two quirks:
- Transmits packets with non-zero dbc in its beginning
- Transmits packets with wrong values in syt field

For the first quirk, this commit adds CIP_SKIP_INIT_DBC_CHECK flag for
incoming stream to skip first check of dbc.

For the second quirk, this commit doesn't add duplex stream which
Fireworks/BeBoB drivers use. So OXFW driver generates syt value for outgoing
stream.

Here are examples of a sequence of packets transmitted by Behringer F-Control
Audio 202. There are differences between sequences of syt value when OXFW
driver transfers outgoing stream or not.

When driver gives no outgoing stream:
Index Payload CIP_Header_0 CIP_Header_1
38 14 00020092 900103D1
39 12 00020098 900102FF
40 12 0002009D 9001027F
41 14 000200A2 90010396
42 14 000200A8 900102E8
43 12 000200AE 90010219
44 14 000200B3 90010331
45 12 000200B9 9001025F
46 14 000200BE 90010376
47 12 000200C4 900102A1
00 12 000200C9 9001023E
01 14 000200CE 90010358
02 12 000200D4 90010289
03 16 000200D9 900103A3
04 12 000200E0 900102DD
05 14 000200E5 900103F1
06 12 000200EB 90010335
07 12 000200F0 90010263
08 14 000200F5 9001037C
09 12 000200FB 900102AE

When driver gives outgoing stream:
Index Payload CIP_Header_0 CIP_Header_1
38 12 000200BD 900104A8
39 14 000200C2 900104A8
40 12 000200C8 900104AC
41 14 000200CD 900104A9
42 12 000200D3 900104B1
43 14 000200D8 900104A8
44 12 000200DE 900104AA
45 14 000200E3 900104A9
46 14 000200E9 900104AE
47 12 000200EF 900104A8
00 14 000200F4 900104AD
01 12 000200FA 900104A7
02 14 000200FF 900104A9
03 12 00020005 900104A9
04 14 0002000A 900104B1
05 12 00020010 900104AA
06 14 00020015 900104AD
07 12 0002001B 900104A7
08 14 00020020 900104AC
09 12 00020026 900104A7

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Change the way to start stream

In past commit, this driver can keep stream formations for each sampling
rate. So its stream functionality can decide stream formations with gi

ALSA: oxfw: Change the way to start stream

In past commit, this driver can keep stream formations for each sampling
rate. So its stream functionality can decide stream formations with given
some parameters.

This commit moves related codes from PCM functionality to stream
functionality. Furthermore, to set stream format correctly, this commit
uses AV/C Stream Format Information command instead of AV/C Input/Output
Plug Signal Format command.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Add proc interface for debugging purpose

This commit adds proc interface to get information about stream
formation. This commit also adds snd_oxfw_stream_get_current_formatio

ALSA: oxfw: Add proc interface for debugging purpose

This commit adds proc interface to get information about stream
formation. This commit also adds snd_oxfw_stream_get_current_formation()
to get current stream formation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Change the way to make PCM rules/constraints

In previous commit, this driver can get to know stream formations at
each supported sampling rates. This commit uses it to make P

ALSA: oxfw: Change the way to make PCM rules/constraints

In previous commit, this driver can get to know stream formations at
each supported sampling rates. This commit uses it to make PCM
rules/constraints and obsoletes hard-coded rules/constraints.

For this purpose, this commit adds 'struct snd_oxfw_stream_formation' and
snd_oxfw_stream_parse_format() to parse data channel formation of data
block.

According to datasheet of OXFW970/971, they support 32.0kHz to 196.0kHz.

As long as developers investigate, some devices are confirmed to have
several formats for the same sampling rate.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation

OXFW970/971 may supports AV/C Stream Format Information Specification 1.1
Working Draft (Apr

ALSA: oxfw: Add support for AV/C stream format command to get/set supported stream formation

OXFW970/971 may supports AV/C Stream Format Information Specification 1.1
Working Draft (Apr 2005, 1394TA). By using this command, drivers can get to know
stream formations which device supports.

This commit adds 'EXTENDED STREAM FORMAT INFORMATION' command. This command
has two subfunctions, 'SINGLE' and 'LIST'. Drivers can use 'SINGLE' subfunction
to know/set current formation of AMDTP stream, Drivers can use 'LIST'
subfunction to know an available formation of AMDTP stream in a certain sampling
rate.

But some devices don't implement the 'LIST' subfunction. So this commit uses
an assumption that 'if they don't implement it, they don't change stream
formation depending on current each sampling rate'. With this assumption, this
driver generates formations for such devices by:
1.getting current formation by SINGLE subfunction
2.getting supported sampling rates
3.applying current formation for all of supported sampling rates

Followed commit implements a parser of this format information.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Change the way to name card

This is a preparation for more models. In following commit, members
of 'struct snd_card' related to name becomes to consists of vendor and
mod

ALSA: oxfw: Change the way to name card

This is a preparation for more models. In following commit, members
of 'struct snd_card' related to name becomes to consists of vendor and
model strings in device's config-rom.

Current supported devices also has strings in their config rom, but the
strings are too long to name sound card, thus this driver still keep
hard-coded vendor and model names for them.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Split control functionality to a new file

This is a help for works in followed patches.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Taka

ALSA: oxfw: Split control functionality to a new file

This is a help for works in followed patches.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Split PCM functionality to a new file

This is a help for works in followed patches.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi

ALSA: oxfw: Split PCM functionality to a new file

This is a help for works in followed patches.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: oxfw: Split stream functionality to a new file and add a header file

This is a help for works in followed patches.

And this commit remove 'fw_unit_get()/fw_unit_put()' because

ALSA: oxfw: Split stream functionality to a new file and add a header file

This is a help for works in followed patches.

And this commit remove 'fw_unit_get()/fw_unit_put()' because these
are called by helper functions in 'snd-firewire-lib'.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...