ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series

This commit allows this driver to support all of models which Focusrite
produces with DM1000/BeBoB. They are:
- Saff

ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series

This commit allows this driver to support all of models which Focusrite
produces with DM1000/BeBoB. They are:
- Saffire
- Saffire LE
- SaffirePro 10 I/O
- SaffirePro 26 I/O

This commit adds Focusrite specific operations:
1. Get source of clock
2. Get/Set sampling frequency
3. Get metering information

The driver uses these functionalities to read/write specific address by async
transaction.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: bebob: Add support for Yamaha GO series

This commit allows this driver to support all of models which Yamaha produced
with DM1000/BeBoB. They are:
- GO44
- GO46

ALSA: bebob: Add support for Yamaha GO series

This commit allows this driver to support all of models which Yamaha produced
with DM1000/BeBoB. They are:
- GO44
- GO46

This commit adds Yamaha specific operations. To get source of clock, AV/C Audio
Subunit command is used.

I note that their appearances are similar to some models of TerraTec; 'Go44' is
similar to 'PHASE 24 FW' and 'GO46' is similar to 'PHASE X24 FW'. But their
combination of Audio/Music subunits is a bit different.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: bebob: Add support for Terratec PHASE, EWS series and Aureon

This commit allows this driver to support all of models which Terratec produced
with DM1000/BeBoB. They are:
- PHA

ALSA: bebob: Add support for Terratec PHASE, EWS series and Aureon

This commit allows this driver to support all of models which Terratec produced
with DM1000/BeBoB. They are:
- PHASE 24 FW
- PHASE X24 FW
- PHASE 88 Rack FW
- EWS MIC2
- EWS MIC4
- Aureon 7.1 Firewire

For Phase series, this commit adds a Terratec specific operation. To get source
of clock. AV/C Audio Subunit command is used.

For EWS series and Aureon, this module uses normal operations.

Tested-by: Maximilian Engelhardt <maxi@daemonizer.de> (PHASE 24 FW)
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: bebob: Add hwdep interface

This interface is designed for mixer/control application. By using hwdep
interface, the application can get information about firewire node, can
lock

ALSA: bebob: Add hwdep interface

This interface is designed for mixer/control application. By using hwdep
interface, the application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: bebob: Add PCM interface

This commit adds a functionality to capture/playback PCM samples.

When AMDTP stream is already running for PCM or the source of clock is not
inter

ALSA: bebob: Add PCM interface

This commit adds a functionality to capture/playback PCM samples.

When AMDTP stream is already running for PCM or the source of clock is not
internal, available sampling rate is limited at current one.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: bebob: Add MIDI interface

This commit adds a functionality to capture/playback MIDI messages.

When no AMDTP streams are running, this module starts AMDTP stream at current

ALSA: bebob: Add MIDI interface

This commit adds a functionality to capture/playback MIDI messages.

When no AMDTP streams are running, this module starts AMDTP stream at current
sampling rate for MIDI substream.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: bebob: Add skelton for BeBoB based devices

This commit adds a new driver for BeBoB based devices with no specific
operations. Currently this driver just create/remove card instance

ALSA: bebob: Add skelton for BeBoB based devices

This commit adds a new driver for BeBoB based devices with no specific
operations. Currently this driver just create/remove card instance according
to callbacks.

BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire
devices with DM1000/DM1100/DM1500 chipset. It gives common way for host
system to handle BeBoB based devices.

Current supported devices:
- Edirol FA-66/FA-101
- PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
- BridgeCo RDAudio1/Audio5
- Mackie Onyx 1220/1620/1640 (Firewire I/O Card)
- Mackie d.2 (Firewire Option)
- Stanton FinalScratch 2 (ScratchAmp)
- Tascam IF-FW DM
- Behringer XENIX UFX 1204/1604
- Behringer Digital Mixer X32 series (X-UF Card)
- Apogee Rosetta 200/Rosetta 400 (X-FireWire card)
- Apogee DA-16X/AD-16X/DD-16X (X-FireWire card)
- Apogee Ensemble
- ESI Quotafire610
- AcousticReality eARMasterOne
- CME MatrixKFW
- Phonix Helix Board 12 MkII/18 MkII/24 MkII
- Phonic Helix Board 12 Universal/18 Universal/24 Universal
- Lynx Aurora 8/16 (LT-FW)
- ICON FireXon
- PrismSound Orpheus/ADA-8XR

Devices possible to be supported if identifying IDs:
- Apogee Mini-Me Firewire/Mini-DAC Firewire
- Behringer F-Control Audio 610/1616
- Cakewalk Sonar Power Studio 66
- CME UF400e
- ESI Quotafire XL
- Infrasonic DewX/Windy6
- Mackie Digital X Bus x.200/400
- Phonic Helix Board 12/18/24
- Phonic FireFly 202/302
- Rolf Spuler Firewire Guitar

Tested-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: fireworks: Add hwdep interface

This interface is designed for mixer/control application. To use hwdep
interface, the application can get information about firewire node, can
lo

ALSA: fireworks: Add hwdep interface

This interface is designed for mixer/control application. To use hwdep
interface, the application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: fireworks: Add PCM interface

This commit adds a functionality to capture/playback PCM samples.

When AMDTP stream is already running for PCM or the source of clock is not
i

ALSA: fireworks: Add PCM interface

This commit adds a functionality to capture/playback PCM samples.

When AMDTP stream is already running for PCM or the source of clock is not
internal, available sampling rate is limited at current one.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: fireworks: Add MIDI interface

This commit adds a functionality to capture/playback MIDI messages.

When no AMDTP streams are running, this driver starts AMDTP stream for MIDI

ALSA: fireworks: Add MIDI interface

This commit adds a functionality to capture/playback MIDI messages.

When no AMDTP streams are running, this driver starts AMDTP stream for MIDI
stream at current sampling rate.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: fireworks: Add transaction and some commands

Fireworks uses own command and response. This commit adds functionality to
transact and adds some commands required for sound card inst

ALSA: fireworks: Add transaction and some commands

Fireworks uses own command and response. This commit adds functionality to
transact and adds some commands required for sound card instance and kernel
streaming.

There are two ways to deliver substance of this transaction:
1.AV/C vendor dependent command for command/response
2.Async transaction to specific addresses for command/response

By way 1, I confirm AudioFire12 cannot correctly response to some commands with
firmware version 5.0 or later. This is also confirmed by FFADO. So this driver
implement way 2.

The address for response gives an issue. When this driver allocate own callback
function into the address, then no one can allocate its own callback function.
This situation is not good for applications in user-land. This issue is solved
in later commit.

I note there is a command to change the address for response if the device
supports. But this driver uses default value. So users should not execute this
command as long as hoping this driver works correctly.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: fireworks: Add skelton for Fireworks based devices

This commit adds a new driver for devices based on Fireworks. This driver
just creates/removes card instance according to callbac

ALSA: fireworks: Add skelton for Fireworks based devices

This commit adds a new driver for devices based on Fireworks. This driver
just creates/removes card instance according to callbacks.

Fireworks is a board module which Echo Audio produced. This module
consists of three chipsets:
- Communication chipset for IEEE1394 PHY/Link and IEC 61883-1/6
- DSP or/and FPGA for signal processing
- Flash Memory to store firmwares

Current supported devices:
- Mackie Onyx 400F/1200F
- Echo AudioFire12/8(until 2009 July)
- Echo AudioFire2/4/Pre8/8(since 2009 July)
- Echo Fireworks 8/HDMI
- Gibson Robot Interface pack/GoldTop

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: dice: restrict the driver to playback-only devices

At the moment, this driver supports only playback, while FFADO supports
(only) full-duplex devices. So, prevent conflicts by not

ALSA: dice: restrict the driver to playback-only devices

At the moment, this driver supports only playback, while FFADO supports
(only) full-duplex devices. So, prevent conflicts by not claiming
devices that would be better handled by FFADO.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

show more ...

ALSA: add DICE driver

As a start point for further development, this is an incomplete driver
for DICE devices:
- only playback (so no clock source except the bus clock)
- only 44

ALSA: add DICE driver

As a start point for further development, this is an incomplete driver
for DICE devices:
- only playback (so no clock source except the bus clock)
- only 44.1 kHz
- no MIDI
- recovery after bus reset is slow
- hwdep device is created, but not actually implemented

Contains compilation fixes by Stefan Richter.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

show more ...

ALSA: firewire: add Stanton SCS.1d/1m driver

Add a MIDI driver for the Stanton FireWire DJ controllers.

Tested-by: Sean M. Pappalardo - D.J. Pegasus <spappalardo@mixxx.org>
Sign

ALSA: firewire: add Stanton SCS.1d/1m driver

Add a MIDI driver for the Stanton FireWire DJ controllers.

Tested-by: Sean M. Pappalardo - D.J. Pegasus <spappalardo@mixxx.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>

show more ...

ALSA: isight: remove experimental status

Experiments have shown this driver to work now.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Stefan Richter <stefanr@s

ALSA: isight: remove experimental status

Experiments have shown this driver to work now.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: add Apple iSight microphone driver

This adds an experimental driver for the front and rear microphones of
the Apple iSight web camera.

Signed-off-by: Clemens Ladisch <clem

ALSA: add Apple iSight microphone driver

This adds an experimental driver for the front and rear microphones of
the Apple iSight web camera.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...

ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver

Add a driver for two playback-only FireWire devices based on the OXFW970
chip.

v2: better AMDTP API abstractio

ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver

Add a driver for two playback-only FireWire devices based on the OXFW970
chip.

v2: better AMDTP API abstraction; fix fw_unit leak; small fixes
v3: cache the iPCR value
v4: FireWave constraints; fix fw_device reference counting;
fix PCR caching; small changes and fixes
v5: volume/mute support; fix crashing due to pcm stop races
v6: fix build; one-channel volume for LaCie
v7: use signed values to make volume (range checks) work; fix function
block IDs for volume/mute; always use channel 0 for LaCie volume

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: Jay Fenlason <fenlason@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

show more ...