Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68 |
|
#
5ba95e8e |
| 12-Sep-2022 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Use GIC interrupt definitions
Use human-readable definitions for GIC interrupt type and flag, instead of hard-coding the numbers. No functional change.
Signed-off-by: Kunihiko
arm64: dts: uniphier: Use GIC interrupt definitions
Use human-readable definitions for GIC interrupt type and flag, instead of hard-coding the numbers. No functional change.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042321.4817-6-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
173b9b8e |
| 12-Sep-2022 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Rename gpio-hog nodes
According to gpio-hog schema, should add the suffix "-hog" to the node names including gpio-hog to fix the following warning.
uniphier-ld11-ref.dtb: gp
arm64: dts: uniphier: Rename gpio-hog nodes
According to gpio-hog schema, should add the suffix "-hog" to the node names including gpio-hog to fix the following warning.
uniphier-ld11-ref.dtb: gpio@55000000: 'xirq0' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
This applies to the devicetre for LD11, LD20 and PXs3 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20220913042321.4817-5-hayashi.kunihiko@socionext.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
Revision tags: v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51 |
|
#
dcd54fa8 |
| 08-Jul-2020 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Rename ethphy node to ethernet-phy
This renames the node name "ethphy" to "ethernet-phy" according to Documentation/devicetree/bindings/net/mdio.yaml.
Signed-off-by: Kunihiko
arm64: dts: uniphier: Rename ethphy node to ethernet-phy
This renames the node name "ethphy" to "ethernet-phy" according to Documentation/devicetree/bindings/net/mdio.yaml.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
#
cde5a9eb |
| 07-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: give fixed port number to support card serial
Add this to the aliases node to make it more convenient.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
Revision tags: v5.4.50, v5.7.7, v5.4.49, v5.7.6 |
|
#
2b1b1267 |
| 23-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: add interrupts to support card serial
Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked.
Since then, 'make A
arm64: dts: uniphier: add interrupts to support card serial
Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked.
Since then, 'make ARCH=arm64 dtbs_check' is so noisy because the required property 'interrupts' is missing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31 |
|
#
44f0746d |
| 02-Apr-2020 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Add ethernet aliases
Add 'aliases' properties for ethernet device.
U-Boot performs a fix-up of the MAC address and will overwrite the values from the Linux devicetree for alia
arm64: dts: uniphier: Add ethernet aliases
Add 'aliases' properties for ethernet device.
U-Boot performs a fix-up of the MAC address and will overwrite the values from the Linux devicetree for aliased ethernet device. The MAC address can be inherited from U-Boot by adding aliases of ethernet devices.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12 |
|
#
d7b9beb8 |
| 02-Oct-2018 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Add USB3 controller nodes
Add USB3 controller nodes including usb-core, resets, regulator, ss-phy and hs-phy. This supports for LD20, PXs3 and the boards. This includes additio
arm64: dts: uniphier: Add USB3 controller nodes
Add USB3 controller nodes including usb-core, resets, regulator, ss-phy and hs-phy. This supports for LD20, PXs3 and the boards. This includes additional efuse nodes for obtaining PHY trimming values.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
8b82b66e |
| 26-Apr-2018 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: stabilize ethernet of LD20 reference board
Currently, the ethernet RGMII mode on the LD20 reference board is unstable.
The default drive-strength of ethernet TX pins is too st
arm64: dts: uniphier: stabilize ethernet of LD20 reference board
Currently, the ethernet RGMII mode on the LD20 reference board is unstable.
The default drive-strength of ethernet TX pins is too strong because there is no dumping resistor on the TX lines on the board.
Weaken the drive-strength to make the ethernet more stable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.16 |
|
#
05f7e3d1 |
| 10-Mar-2018 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: use proper SPDX-License-Identifier style
According to Documentation/process/license-rules.rst, move the SPDX License Identifier to the very top of the file. I used C++ comment
arm64: dts: uniphier: use proper SPDX-License-Identifier style
According to Documentation/process/license-rules.rst, move the SPDX License Identifier to the very top of the file. I used C++ comment style not only for the SPDX line but for the entire block because this seems Linus' preference [1]. I also dropped the parentheses to follow the examples in that document.
[1] https://lkml.org/lkml/2017/11/25/133
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
#
c73730ee |
| 14-Feb-2018 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: add AVE ethernet node
Add nodes of the AVE ethernet controller for LD11 and LD20 SoCs and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-o
arm64: dts: uniphier: add AVE ethernet node
Add nodes of the AVE ethernet controller for LD11 and LD20 SoCs and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.15, v4.13.16 |
|
#
8311ca57 |
| 16-Nov-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: use macros in dt-bindings header
The dt-bindings header was applied to the driver subsystem. I had to wait for a merge window to use it from DT.
Signed-off-by: Masahiro Yamad
arm64: dts: uniphier: use macros in dt-bindings header
The dt-bindings header was applied to the driver subsystem. I had to wait for a merge window to use it from DT.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
#
897281ba |
| 16-Nov-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: remove unnecessary interrupt-parent
These were added to make the ARM64 branch self-contained because updates for ARM and ARM64 are supposed to be sent as separate pull requests
arm64: dts: uniphier: remove unnecessary interrupt-parent
These were added to make the ARM64 branch self-contained because updates for ARM and ARM64 are supposed to be sent as separate pull requests.
Now, they were merged together in Linus' tree and interrupt-parent from the arch/arm/boot/dts/uniphier-support-card.dtsi is visible from ARM64 DT files by the cross-arch reference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.14 |
|
#
15e85695 |
| 17-Oct-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: add GPIO hog definition
Interrupt lines from on-board devices are connected to the GPIO controller. Add GPIO hogging so that the corresponding GPIO line is automatically reque
arm64: dts: uniphier: add GPIO hog definition
Interrupt lines from on-board devices are connected to the GPIO controller. Add GPIO hogging so that the corresponding GPIO line is automatically requested.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
#
429f203e |
| 17-Oct-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: route on-board device IRQ to GPIO controller
Interrupt lines from on-board devices are connected to the GPIO controller. Handle this correctly.
Signed-off-by: Masahiro Yamada
arm64: dts: uniphier: route on-board device IRQ to GPIO controller
Interrupt lines from on-board devices are connected to the GPIO controller. Handle this correctly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.13.5, v4.13 |
|
#
5740ea4e |
| 09-Aug-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: use #include instead of /include/
To include dt-bindings headers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
Revision tags: v4.12 |
|
#
12301cff |
| 04-Jun-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: use SPDX-License-Identifier
Follow the recent trend for the license description, and fix the wrongly stated X11 to MIT.
The X11 license text [1] is explicitly for the X Consor
arm64: dts: uniphier: use SPDX-License-Identifier
Follow the recent trend for the license description, and fix the wrongly stated X11 to MIT.
The X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim.
[1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2 |
|
#
b9f2fc38 |
| 11-Mar-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: move memory node below aliases node
These UniPhier DT files are fine as long as they are compiled in the Linux build system. It is true that Linux is the biggest user of DT, b
arm64: dts: uniphier: move memory node below aliases node
These UniPhier DT files are fine as long as they are compiled in the Linux build system. It is true that Linux is the biggest user of DT, but DT is project neutral from its concept. DT files are often re-used for other projects. Especially for the UniPhier platform, these DT files are re-used for U-Boot as well.
If I feed these DT files to the FDTGREP tool in U-Boot, it complains about the node order.
FDTGREP spl/u-boot-spl.dtb Error at 'fdt_find_regions': FDT_ERR_BADLAYOUT /aliases node must come before all other nodes
Given that DT is not very sensitive to the order of nodes, this is a problem of FDTGREP. I filed a bug report a year ago, but it has not been fixed yet.
Differentiating DT is painful. So, I am up-streaming the requirement from the down-stream project.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.10.1 |
|
#
b5027603 |
| 25-Feb-2017 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: fix no unit name warnings
Fix warnings reported when built with W=1: Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Masahiro Yamada <yamada.masah
arm64: dts: uniphier: fix no unit name warnings
Fix warnings reported when built with W=1: Node /memory has a reg or ranges property, but no unit name
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20 |
|
#
cea59bd0 |
| 29-Aug-2016 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: match DT names to other projects and documents
All UniPhier device trees have the common prefix "uniphier-", so "ph1-" is just making names longer. Recent documents and other
arm64: dts: uniphier: match DT names to other projects and documents
All UniPhier device trees have the common prefix "uniphier-", so "ph1-" is just making names longer. Recent documents and other projects are not using PH1- prefixes any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51 |
|
#
dcd54fa8 |
| 08-Jul-2020 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Rename ethphy node to ethernet-phy This renames the node name "ethphy" to "ethernet-phy" according to Documentation/devicetree/bindings/net/mdio.yaml. Sign
arm64: dts: uniphier: Rename ethphy node to ethernet-phy This renames the node name "ethphy" to "ethernet-phy" according to Documentation/devicetree/bindings/net/mdio.yaml. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
#
cde5a9eb |
| 07-Jul-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: give fixed port number to support card serial Add this to the aliases node to make it more convenient. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionex
arm64: dts: uniphier: give fixed port number to support card serial Add this to the aliases node to make it more convenient. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v5.4.50, v5.7.7, v5.4.49, v5.7.6 |
|
#
2b1b1267 |
| 23-Jun-2020 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: add interrupts to support card serial Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked.
arm64: dts: uniphier: add interrupts to support card serial Since commit e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema"), the schema for "ns16550a" is checked. Since then, 'make ARCH=arm64 dtbs_check' is so noisy because the required property 'interrupts' is missing. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31 |
|
#
44f0746d |
| 02-Apr-2020 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Add ethernet aliases Add 'aliases' properties for ethernet device. U-Boot performs a fix-up of the MAC address and will overwrite the values from the Linux
arm64: dts: uniphier: Add ethernet aliases Add 'aliases' properties for ethernet device. U-Boot performs a fix-up of the MAC address and will overwrite the values from the Linux devicetree for aliased ethernet device. The MAC address can be inherited from U-Boot by adding aliases of ethernet devices. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12 |
|
#
d7b9beb8 |
| 02-Oct-2018 |
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> |
arm64: dts: uniphier: Add USB3 controller nodes Add USB3 controller nodes including usb-core, resets, regulator, ss-phy and hs-phy. This supports for LD20, PXs3 and the boards. This incl
arm64: dts: uniphier: Add USB3 controller nodes Add USB3 controller nodes including usb-core, resets, regulator, ss-phy and hs-phy. This supports for LD20, PXs3 and the boards. This includes additional efuse nodes for obtaining PHY trimming values. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|
Revision tags: v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17 |
|
#
8b82b66e |
| 26-Apr-2018 |
Masahiro Yamada <yamada.masahiro@socionext.com> |
arm64: dts: uniphier: stabilize ethernet of LD20 reference board Currently, the ethernet RGMII mode on the LD20 reference board is unstable. The default drive-strength of ethern
arm64: dts: uniphier: stabilize ethernet of LD20 reference board Currently, the ethernet RGMII mode on the LD20 reference board is unstable. The default drive-strength of ethernet TX pins is too strong because there is no dumping resistor on the TX lines on the board. Weaken the drive-strength to make the ethernet more stable. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
show more ...
|