|
Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24 |
|
| #
e1012111 |
| 07-Apr-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: msm8994: remove superfluous "input-enable"
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers
arm64: dts: qcom: msm8994: remove superfluous "input-enable"
Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers. Since
patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not
input-enable") the property is not accepted anymore.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230407175807.124394-1-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19 |
|
| #
3555dd52 |
| 12-Mar-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: msm8994-kitakami: drop unit address from PMI8994 regulator
The PMIC regulators are not supposed to have unit addresses.
Fixes: e9783584c9b7 ("arm64: dts: qcom: msm8994-kitakami: A
arm64: dts: qcom: msm8994-kitakami: drop unit address from PMI8994 regulator
The PMIC regulators are not supposed to have unit addresses.
Fixes: e9783584c9b7 ("arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230312183622.460488-6-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17 |
|
| #
690e8993 |
| 02-Jan-2023 |
Konrad Dybcio <konrad.dybcio@linaro.org> |
arm64: dts: qcom: msm8994-kitakami: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bj
arm64: dts: qcom: msm8994-kitakami: Pad addresses to 8 hex digits
Some addresses were 7-hex-digits long, or less. Fix that.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230102094642.74254-17-konrad.dybcio@linaro.org
show more ...
|
|
Revision tags: v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3 |
|
| #
9d7d01da |
| 18-Oct-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix
arm64: dts: qcom: msm8994: Align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Order the "function" and "pins" property to match other DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221018155450.39816-2-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71 |
|
| #
372698e8 |
| 26-Sep-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: align RPM regulators node name with bindings
Node names should be generic and new DT schema expects RPM regulators
node to be just "regulators".
Signed-off-by: Krzysztof Kozlowski
arm64: dts: qcom: align RPM regulators node name with bindings
Node names should be generic and new DT schema expects RPM regulators
node to be just "regulators".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926092104.111449-3-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59 |
|
| #
36c9d012 |
| 02-Aug-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: use GPIO flags for tlmm
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include
gpio.h header if this is first usage of that flag.
Signed-off-by: Krzysztof Kozlowski <k
arm64: dts: qcom: use GPIO flags for tlmm
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs. Include
gpio.h header if this is first usage of that flag.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220802153947.44457-4-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48 |
|
| #
5a4b0b85 |
| 15-Jun-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: correct gpio-keys properties
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjor
arm64: dts: qcom: correct gpio-keys properties
gpio-keys children do not use unit addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-22-krzysztof.kozlowski@linaro.org
show more ...
|
| #
b08f5cbd |
| 15-Jun-2022 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: qcom: align gpio-key node names with dtschema
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <k
arm64: dts: qcom: align gpio-key node names with dtschema
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220616005333.18491-21-krzysztof.kozlowski@linaro.org
show more ...
|
|
Revision tags: v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17 |
|
| #
410e1619 |
| 19-Mar-2022 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm8994-kitakami: Update regulator configuration
Remove regulator-always-on property where not necessary and mark regulators
that are not supposed to be voted active on boot with r
arm64: dts: qcom: msm8994-kitakami: Update regulator configuration
Remove regulator-always-on property where not necessary and mark regulators
that are not supposed to be voted active on boot with regulator-boot-on.
While at it, reorder the load properties to make it look more decent.
Reorder PMICs to fix a probe defer caused by messy dependencies and Linux's
inability to handle them (at least for now).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-12-konrad.dybcio@somainline.org
show more ...
|
| #
7d9379bf |
| 19-Mar-2022 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm8994-kitakami: Disable a mistakengly enabled I2C host
I2C4 turns out not to be used on Kitakami after all and it only blocks a
GPIO used by camera hardware.
Signed-off-by: Konr
arm64: dts: qcom: msm8994-kitakami: Disable a mistakengly enabled I2C host
I2C4 turns out not to be used on Kitakami after all and it only blocks a
GPIO used by camera hardware.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220319174645.340379-11-konrad.dybcio@somainline.org
show more ...
|
|
Revision tags: v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5 |
|
| #
95dcb997 |
| 23-Nov-2021 |
Dang Huynh <danct12@riseup.net> |
arm64: dts: qcom: Drop input-name property
This property doesn't seem to exist in the documentation nor
in source code, but for some reason it is defined in a bunch
of device trees.
Signed-off-by:
arm64: dts: qcom: Drop input-name property
This property doesn't seem to exist in the documentation nor
in source code, but for some reason it is defined in a bunch
of device trees.
Signed-off-by: Dang Huynh <danct12@riseup.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211123162436.1507341-1-danct12@riseup.net
show more ...
|
|
Revision tags: v5.15.4, v5.15.3, v5.15.2, v5.15.1 |
|
| #
227ee158 |
| 03-Nov-2021 |
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> |
arm64: dts: qcom: msm8994-sony-xperia-kitakami: correct lvs1 and lvs2 supply property
The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to
specify the supply regulator for LVS1 and L
arm64: dts: qcom: msm8994-sony-xperia-kitakami: correct lvs1 and lvs2 supply property
The qcom_rpm_smd_regulator driver uses vdd_lvs1_2-supply property to
specify the supply regulator for LVS1 and LVS2 (following the pin name
in the PMIC datasheet). Correct the board's device tree property, so
that the regulator supply is setup properly.
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211104002949.2204727-4-dmitry.baryshkov@linaro.org
show more ...
|
|
Revision tags: v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
| #
e093d1a2 |
| 30-Jan-2021 |
Gustave Monce <gustave.monce@outlook.com> |
arm64: dts: qcom: msm8994: Fix remaining BLSP errors/mistakes
* Move 35500 clock-frequency to kitakami (turns out it's a Sony specific)
* Add missing interfaces
* Fix the naming scheme
* Fix up pin
arm64: dts: qcom: msm8994: Fix remaining BLSP errors/mistakes
* Move 35500 clock-frequency to kitakami (turns out it's a Sony specific)
* Add missing interfaces
* Fix the naming scheme
* Fix up pin assignments to make all BLSPs work
* Add DMA where previously omitted
Signed-off-by: Gustave Monce <gustave.monce@outlook.com>
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210131013853.55810-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
54b1511e |
| 18-Jan-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm8994-kitakami: Add missing email in the copyright
I forgot to do this the first time around.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kern
arm64: dts: qcom: msm8994-kitakami: Add missing email in the copyright
I forgot to do this the first time around.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210118162432.107275-11-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
74d6d0a1 |
| 18-Jan-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm8994/8994-kitakami: Fix up the memory map
The previous map was wrong. Fix it up.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/202
arm64: dts: qcom: msm8994/8994-kitakami: Fix up the memory map
The previous map was wrong. Fix it up.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210118162432.107275-10-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
e9783584 |
| 18-Jan-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator
This is required for the GPU to function.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210
arm64: dts: qcom: msm8994-kitakami: Add VDD_GFX regulator
This is required for the GPU to function.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210118162432.107275-8-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
ab8e4a85 |
| 18-Jan-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm8994-kitakami: Add uSD card support
Assign regulators and enable regulator-set-load on
VMMC so as to provide sufficient power.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somai
arm64: dts: qcom: msm8994-kitakami: Add uSD card support
Assign regulators and enable regulator-set-load on
VMMC so as to provide sufficient power.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210118162432.107275-7-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
e8528157 |
| 18-Jan-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm8994-kitakami: Add Synaptics RMI touchscreen
All Kitakami phones use Synaptics RMI4 touchscreens
attached to the same i2c bus. Configure and enable it.
Signed-off-by: Konrad Dy
arm64: dts: qcom: msm8994-kitakami: Add Synaptics RMI touchscreen
All Kitakami phones use Synaptics RMI4 touchscreens
attached to the same i2c bus. Configure and enable it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210118162432.107275-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
676b61b4 |
| 18-Jan-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: msm/apq8994-kitakami: Add regulator config
Add regulator config for all Kitakami devices, commonizing where
applicable.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
arm64: dts: qcom: msm/apq8994-kitakami: Add regulator config
Add regulator config for all Kitakami devices, commonizing where
applicable.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210118162432.107275-5-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
| #
72b31241 |
| 18-Jan-2021 |
Konrad Dybcio <konrad.dybcio@somainline.org> |
arm64: dts: qcom: Add support for remaining Sony Kitakami boards
This patch adds support for the following Xperias:
* Z3+ [aka Z4 in some regions] (Ivy)
* Z4 Tablet (Karin)
* Z4 Tablet Wi-Fi (Karin
arm64: dts: qcom: Add support for remaining Sony Kitakami boards
This patch adds support for the following Xperias:
* Z3+ [aka Z4 in some regions] (Ivy)
* Z4 Tablet (Karin)
* Z4 Tablet Wi-Fi (Karin_windy) [APQ8094]
* Z5 Compact (Suzuran)
* Z5 Premium (Satsuki)
These devices are very similar in terms of hardware, with main
differences being display panels.
While at it, update comments describing hardware used:
SMB charger seems to not be used after all, PMI8994 charger
is in use instead.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210118162432.107275-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59 |
|
| #
e884fb6c |
| 14-Aug-2020 |
Konrad Dybcio <konradybcio@gmail.com> |
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
There is an issue with Kitakami eMMCs dying when a quirk
isn't addressed. Until that happens, disable it.
Signed-off-by: Konrad Dybcio <konrad
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
There is an issue with Kitakami eMMCs dying when a quirk
isn't addressed. Until that happens, disable it.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200814154749.257837-1-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6 |
|
| #
551969ad |
| 24-Jun-2020 |
Konrad Dybcio <konradybcio@gmail.com> |
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
a Kitakami-comm
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
a Kitakami-common DTSI has been created so as to reduce
clutter when remaining devices are added.
The board currently supports
* Serial
* SDHCI
* I2C
* Regulator configuration
* pstore log dump
* GPIO keys
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-9-konradybcio@gmail.com
[bjorn: Changed vendor identifier in board compatible from somc to sony]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59 |
|
| #
e884fb6c |
| 14-Aug-2020 |
Konrad Dybcio <konradybcio@gmail.com> |
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
There is an issue with Kitakami eMMCs dying when a quirk
isn't addressed. Until that happens, disable it.
Signed-off-by: K
arm64: dts: qcom: kitakami: Temporarily disable SDHCI1
There is an issue with Kitakami eMMCs dying when a quirk
isn't addressed. Until that happens, disable it.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200814154749.257837-1-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|
|
Revision tags: v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6 |
|
| #
551969ad |
| 24-Jun-2020 |
Konrad Dybcio <konradybcio@gmail.com> |
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
a Kitakami-common DTSI has been created so as to reduce
clutter when remaining devices are added.
The board currently supports
* Serial
* SDHCI
* I2C
* Regulator configuration
* pstore log dump
* GPIO keys
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200624150107.76234-9-konradybcio@gmail.com
[bjorn: Changed vendor identifier in board compatible from somc to sony]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
show more ...
|