arm64: dts: marvell: add UART muxing on Armada 7K/8K

This commit adds the relevant details in the Armada 7K/8K Device Tree
to properly mux the UART used for the serial console. Since the

arm64: dts: marvell: add UART muxing on Armada 7K/8K

This commit adds the relevant details in the Armada 7K/8K Device Tree
to properly mux the UART used for the serial console. Since there is
basically only one possible muxing for the UART0 on the AP, the muxing
configuration is described in armada-ap806.dtsi, and selected from the
individual boards (other boards could be using a different UART).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

ARM64: dts: marvell: enable USB host on Armada-7040-DB

Add I2C expander and USB host PHY (host 0 and host 1) to enable
USB VBUS on USB ports of type A on Armada-7040-DB.

Signed-

ARM64: dts: marvell: enable USB host on Armada-7040-DB

Add I2C expander and USB host PHY (host 0 and host 1) to enable
USB VBUS on USB ports of type A on Armada-7040-DB.

Signed-off-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: remove cpm crypto nodes from dts files

The cryptographic engine on the master cp110 is now enabled by default
at the SoC level. Remove its dts nodes that were only e

arm64: dts: marvell: remove cpm crypto nodes from dts files

The cryptographic engine on the master cp110 is now enabled by default
at the SoC level. Remove its dts nodes that were only enabling it.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB

Explicitly enable the MDIO nodes in the Marvell Armada 7k DB and Marvell
Armada 8k DB. This is needed as the MDIO nodes

arm64: dts: marvell: explicitly enable the mdio nodes for 7k/8k DB

Explicitly enable the MDIO nodes in the Marvell Armada 7k DB and Marvell
Armada 8k DB. This is needed as the MDIO nodes will be disabled in the
CP 110 slave and master dtsi by a following up patch.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB

Enable the cryptographic engine available in the CP110 master on the
Armada 7040 DB.

Signed-off-by: Antoine T

arm64: marvell: dts: enable the crypto engine on the Armada 7040 DB

Enable the cryptographic engine available in the CP110 master on the
Armada 7040 DB.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: add sdhci support for Armada 7K/8K

Also enable it on the Armada 7040 DB and Armada 8040 DB boards.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electron

arm64: dts: marvell: add sdhci support for Armada 7K/8K

Also enable it on the Armada 7040 DB and Armada 8040 DB boards.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K

This commit adds the description of the PPv2.2 hardware block for the
Marvell Armada 7K and Armada 8K processors, and their co

arm64: marvell: dts: add PPv2.2 description to Armada 7K/8K

This commit adds the description of the PPv2.2 hardware block for the
Marvell Armada 7K and Armada 8K processors, and their corresponding Armada
7040 and 8040 Development boards.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: enable several CP interfaces on Armada 7040-DB

This commit enables several interfaces of the CP side of the Armada
7040 for the Armada 7040 DB board:

- one

arm64: dts: marvell: enable several CP interfaces on Armada 7040-DB

This commit enables several interfaces of the CP side of the Armada
7040 for the Armada 7040 DB board:

- one PCIe interface
- one SPI controller with an attached SPI flash
- one I2C controller
- one SATA controller
- two USB3 controllers

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: improve SPI flash description on Armada 7040-DB

This commit slightly improves the description of the SPI flash
connected to the SPI controller of the Armada 7040, by

arm64: dts: marvell: improve SPI flash description on Armada 7040-DB

This commit slightly improves the description of the SPI flash
connected to the SPI controller of the Armada 7040, by:

- Using the more generic "jedec,spi-nor" compatible string, which
lets the driver auto-detect the exact SPI flash type.

- Removing the silly comment about the Chip Select, since reg = <0>
is explicit enough.

- Switching to the new Device Tree binding to describe flash
partitions.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: add UART aliases and define stdout-path

This commit adds the necessary UART aliases to the main Armada 7K/8K
.dtsi file, and uses them to define the /chosen/stdout-p

arm64: dts: marvell: add UART aliases and define stdout-path

This commit adds the necessary UART aliases to the main Armada 7K/8K
.dtsi file, and uses them to define the /chosen/stdout-path property
on the Armada 7040 DB board.

Suggested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: clean up armada-7040-db

Instead of duplicating the node hierarchy, reference the nodes by label,
adding labels where necessary.

Drop some trailing or incons

arm64: dts: marvell: clean up armada-7040-db

Instead of duplicating the node hierarchy, reference the nodes by label,
adding labels where necessary.

Drop some trailing or inconsistent white lines while at it.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
[Thomas: drop Fixes tag as it is not a bug fix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...

arm64: dts: marvell: add Device Tree files for Armada 7K/8K

This commit adds the base Device Tree files for the Armada 7K and 8K
SoCs, as well as the Armada 8040 DB board.

The A

arm64: dts: marvell: add Device Tree files for Armada 7K/8K

This commit adds the base Device Tree files for the Armada 7K and 8K
SoCs, as well as the Armada 8040 DB board.

The Armada 7020, 7040 (7K family) and 8020, 8040 (8K family) are
composed of:

- An AP806 block that contains the CPU core and a few basic
peripherals. The AP806 is available in dual core configurations
(used in 7020 and 8020) and quad core configurations (used in 8020
and 8040).

- One or two CP110 blocks that contain all the high-speed interfaces
(SATA, PCIe, Ethernet, etc.). The 7K family chips have one CP110,
and the 8K family chips have two CP110, giving them twice the
number of HW interfaces.

In order to represent this from a Device Tree point of view, this
commit creates the following hierarchy:

* armada-ap806.dtsi - definitions common to dual/quad ap806
* armada-ap806-dual.dtsi - description of the two CPUs
* armada-7020.dtsi - description of the 7020 SoC
* armada-8020.dtsi - description of the 8020 SoC
* armada-ap806-quad.dtsi - description of the four CPUs
* armada-7040.dtsi - description of the 7040 SoC
* armada-7040-db.dts - description of the 7040 board
* armada-8040.dtsi - description of the 8040 SoC

The CP110 blocks are not described yet, and will be part of future
patch series.

[gregory.clement@free-electrons.com: Fix commit title by adding ' dts:']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

show more ...