Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43 |
|
#
3eced2a2 |
| 31-Jul-2023 |
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> |
arm64: dts: amlogic: drop redundant status=okay in sound nodes
status=okay is by default.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armst
arm64: dts: amlogic: drop redundant status=okay in sound nodes
status=okay is by default.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230731093615.148949-1-krzysztof.kozlowski@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
show more ...
|
Revision tags: v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60 |
|
#
c7f5675b |
| 04-Aug-2021 |
Christian Hewitt <christianshewitt@gmail.com> |
arm64: dts: meson: add audio playback to nexbox-a1
Add initial support limited to HDMI i2s and SPDIF (LPCM).
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong
arm64: dts: meson: add audio playback to nexbox-a1
Add initial support limited to HDMI i2s and SPDIF (LPCM).
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210804140029.4445-1-christianshewitt@gmail.com
show more ...
|
Revision tags: v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10 |
|
#
c183c406 |
| 07-Dec-2020 |
Stefan Agner <stefan@agner.ch> |
arm64: dts: meson: fix PHY deassert timing requirements
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY regis
arm64: dts: meson: fix PHY deassert timing requirements
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. This fixes an issue seen on ODROID-C2 where the Ethernet link doesn't come up when using ip link set down/up: [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36) [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch
show more ...
|
#
46b7f224 |
| 07-Dec-2020 |
Stefan Agner <stefan@agner.ch> |
arm64: dts: meson: fix PHY deassert timing requirements
[ Upstream commit c183c406c4321002fe85b345b51bc1a3a04b6d33 ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for i
arm64: dts: meson: fix PHY deassert timing requirements
[ Upstream commit c183c406c4321002fe85b345b51bc1a3a04b6d33 ]
According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. This fixes an issue seen on ODROID-C2 where the Ethernet link doesn't come up when using ip link set down/up: [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36) [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed
Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33 |
|
#
3245a522 |
| 16-Apr-2020 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by:
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
show more ...
|
Revision tags: v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6 |
|
#
2f9139c2 |
| 26-Mar-2020 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by:
arm64: dts: amlogic: use the new USB control driver for GXL and GXM
Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326134507.4808-11-narmstrong@baylibre.com
show more ...
|
Revision tags: v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11 |
|
#
f29cabf2 |
| 15-Jun-2019 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings
The snps,reset-gpio bindings are deprecated in favour of the generic "Ethernet PHY reset" bindings.
Replace snps,reset-gpio from
arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings
The snps,reset-gpio bindings are deprecated in favour of the generic "Ethernet PHY reset" bindings.
Replace snps,reset-gpio from the ðmac node with reset-gpios in the ethernet-phy node. The old snps,reset-active-low property is now encoded directly as GPIO flag inside the reset-gpios property.
snps,reset-delays-us is converted to reset-assert-us and reset-deassert-us. reset-assert-us is the second cell from snps,reset-delays-us while reset-deassert-us was the third cell.
Instead of blindly copying the old values (which seems strange since they gave the PHY one second to come out of reset) over this also updates the delays based on the datasheets: - the Realtek RTL8211F PHY needs a 10ms assert delay (the datasheet mentions: "For a complete PHY reset, this pin must be asserted low for at least 10ms") and a 30ms deassert delay (the datasheet mentions: "Wait for a further 30ms (for internal circuits settling time) before accessing the PHY register". This applies to the following boards: GXBB NanoPi K2, GXBB Odroid-C2, GXBB Vega S95 variants, GXBB Wetek variants, GXL P230, GXM Khadas VIM2, GXM Nexbox A1, GXM Q200, GXM RBox Pro boards. - the ICPlus IP101GR PHY needs a 10ms assert delay (the datasheet mentions: "Trst | Reset period | 10ms") and a deassert delay of 10ms as well (the datasheet mentions: "Tclk_MII_rdy | MII/RMII clock output ready after reset released | 10ms"). This applies to the GXBB Nexbox A95X board. - the Micrel KSZ9031 seems to require a 100us delay but use the same (seemingly safe) values from RTL8211F due to lack of a board to verify this. This applies to the GXBB P200 board.
The GXBB P201 board is left out from this conversion because it doesn't have a dedicated PHY node (because it's not clear which PHY is used on that board).
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2 |
|
#
890265c9 |
| 11-May-2019 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: amlogic: remove ethernet-phy-idAAAA.BBBB compatible strings
The Ethernet PHY documentation (Documentation/devicetree/bindings/net/phy.txt) states that: If the PHY reports an incorrect
arm64: dts: amlogic: remove ethernet-phy-idAAAA.BBBB compatible strings
The Ethernet PHY documentation (Documentation/devicetree/bindings/net/phy.txt) states that: If the PHY reports an incorrect ID (or none at all) then the "compatible" list may contain an entry with the correct PHY ID in the form: "ethernet-phy-idAAAA.BBBB"
An older version of the documentation suggested that the compatible string can be used when the PHY ID is known.
Remove the ethernet-phy-id compatible string and add a comment with the PHY ID instead. This is a no-op on boards which are shipped with the PHY that was listed (= all known cases). However, if a board manufacturer decides to ship a different PHY we will now load and use the correct driver because we ask the PHY to identify itself.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9 |
|
#
adc52bf7 |
| 18-Apr-2019 |
Jerome Brunet <jbrunet@baylibre.com> |
arm64: dts: meson: fix mmc v2 chips max frequencies
According the datasheets, emmc v2 chips (gxbb and gxl) don't support more that 100Mhz in UHS-1 SD modes and HS in SDIO.
Align the max-frequency t
arm64: dts: meson: fix mmc v2 chips max frequencies
According the datasheets, emmc v2 chips (gxbb and gxl) don't support more that 100Mhz in UHS-1 SD modes and HS in SDIO.
Align the max-frequency to 100MHz for UHS-1 and 50MHz for HS
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3 |
|
#
e5e4df2d |
| 15-Mar-2019 |
Neil Armstrong <narmstrong@baylibre.com> |
arm64: dts: meson-gxm-nexbox-a1: Enable USB
Enable USB on the Nexbox A1 STB
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
Revision tags: v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20, v4.19.19, v4.19.18, v4.19.17, v4.19.16 |
|
#
f29200c8 |
| 14-Jan-2019 |
Loys Ollivier <lollivier@baylibre.com> |
arm64: dts: meson: Fix mmc cd-gpios polarity
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specifi
arm64: dts: meson: Fix mmc cd-gpios polarity
Commit 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") changed the behavior of "cd-inverted" to follow the device tree bindings specification: According to SDHCI standard, CD lines are specified as "active low". Using the "cd-inverted" property means that the CD line is "active high".
Fix the SD card description for meson by setting the cd-gpios as "active low", according to the boards specifications, and dropping the "cd-inverted" property.
Fixes: 89a5e15bcba8 ("gpio/mmc/of: Respect polarity in the device tree") Signed-off-by: Loys Ollivier <lollivier@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
114abfe1 |
| 27-Feb-2018 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
Move the SPDX-License-Identifier lines to the top and drop the license splat.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.c
ARM64: dts: amlogic: Convert to new-style SPDX license identifiers
Move the SPDX-License-Identifier lines to the top and drop the license splat.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.15 |
|
#
059a58fc |
| 17-Jan-2018 |
Jorge Ramirez-Ortiz <jramirez@baylibre.com> |
ARM64: dts: meson: accept MAC addr from u-boot environment
Extend configuring the MAC address from u-boot to all meson boards.
I didn't test this changeset but having checked libretech's u-boot tre
ARM64: dts: meson: accept MAC addr from u-boot environment
Extend configuring the MAC address from u-boot to all meson boards.
I didn't test this changeset but having checked libretech's u-boot tree I believe it should just work.
Signed-off-by: Jorge Ramirez-Ortiz <jramirez@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.13.16, v4.14, v4.13.5 |
|
#
ab36be66 |
| 03-Oct-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
Since the Data Strobe pin is optional, take it out of the default eMMC pins and add a separate entry.
Signed-off-by: Neil Armstrong <na
ARM64: dts: meson-gxl: Take eMMC data strobe out of eMMC pins
Since the Data Strobe pin is optional, take it out of the default eMMC pins and add a separate entry.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.13 |
|
#
67e7607f |
| 31-Aug-2017 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson: add mmc clk gate pins
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running i
ARM64: dts: meson: add mmc clk gate pins
Add the pinctrl to switch mmc clk pins in gpio (pulled down) mode. This is necessary to be able to gate the clk outside of the SoC while keeping it running in the controller
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
673ccaac |
| 31-Aug-2017 |
Jerome Brunet <jbrunet@baylibre.com> |
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.co
ARM64: dts: meson: remove cap-sd-highspeed from emmc nodes
It does not make much sense to define cap-sd-highspeed in the emmc nodes Just remove it.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
b16c71c9 |
| 04-Aug-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add AO CEC nodes
This patch adds the AO CEC node in all the HDMI enabled boards DTS.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilm
ARM64: dts: meson-gx: Add AO CEC nodes
This patch adds the AO CEC node in all the HDMI enabled boards DTS.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.12, v4.10.17, v4.10.16 |
|
#
a5e27015 |
| 13-May-2017 |
Andreas Färber <afaerber@suse.de> |
arm64: dts: meson-gxm-nexbox-a1: Fix node order
Sort nodes referenced by label alphabetically.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
#
17543ddd |
| 13-May-2017 |
Andreas Färber <afaerber@suse.de> |
arm64: dts: meson-gxm-nexbox-a1: Drop UART comment
Product pictures show no DB9 connector, so this seems copy&paste.
Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber
arm64: dts: meson-gxm-nexbox-a1: Drop UART comment
Product pictures show no DB9 connector, so this seems copy&paste.
Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5 |
|
#
6939db7e |
| 21-Mar-2017 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add support for HDMI output
Add HDMI output and connector nodes.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
Revision tags: v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10 |
|
#
093d23db |
| 19-Feb-2017 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
ARM64: dts: amlogic: add the ethernet TX delay configuration
This adds the amlogic,tx-delay-ns property with the old (hardcoded) default value of 2ns to all boards which are using an RGMII ethernet
ARM64: dts: amlogic: add the ethernet TX delay configuration
This adds the amlogic,tx-delay-ns property with the old (hardcoded) default value of 2ns to all boards which are using an RGMII ethernet PHY.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
Revision tags: v4.9 |
|
#
fafdbdf7 |
| 01-Dec-2016 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gx: Add Graphic Controller nodes
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected boards.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.
ARM64: dts: meson-gx: Add Graphic Controller nodes
Add Video Processing Unit and CVBS Output nodes, and enable CVBS on selected boards.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
f51b4545 |
| 22-Nov-2016 |
Neil Armstrong <narmstrong@baylibre.com> |
ARM64: dts: meson-gxm: Add support for the Nexbox A1
Add support for the Nexbox A1 board based on the Amlogic S912 SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: replace '_'
ARM64: dts: meson-gxm: Add support for the Nexbox A1
Add support for the Nexbox A1 board based on the Amlogic S912 SoC.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [khilman: replace '_' in node-names with '-'] Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
show more ...
|
#
46b7f224 |
| 07-Dec-2020 |
Stefan Agner <stefan@agner.ch> |
arm64: dts: meson: fix PHY deassert timing requirements [ Upstream commit c183c406c4321002fe85b345b51bc1a3a04b6d33 ] According to the datasheet (Rev. 1.9) the RTL8211F requires at l
arm64: dts: meson: fix PHY deassert timing requirements [ Upstream commit c183c406c4321002fe85b345b51bc1a3a04b6d33 ] According to the datasheet (Rev. 1.9) the RTL8211F requires at least 72ms "for internal circuits settling time" before accessing the PHY registers. This fixes an issue seen on ODROID-C2 where the Ethernet link doesn't come up when using ip link set down/up: [ 6630.714855] meson8b-dwmac c9410000.ethernet eth0: Link is Down [ 6630.785775] meson8b-dwmac c9410000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet] (irq=36) [ 6630.893071] meson8b-dwmac c9410000.ethernet: Failed to reset the dma [ 6630.893800] meson8b-dwmac c9410000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed [ 6630.902835] meson8b-dwmac c9410000.ethernet eth0: stmmac_open: Hw setup failed Fixes: f29cabf240ed ("arm64: dts: meson: use the generic Ethernet PHY reset GPIO bindings") Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/4a322c198b86e4c8b3dda015560a683babea4d63.1607363522.git.stefan@agner.ch Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
Revision tags: v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6 |
|
#
2f9139c2 |
| 26-Mar-2020 |
Martin Blumenstingl <martin.blumenstingl@googlemail.com> |
arm64: dts: amlogic: use the new USB control driver for GXL and GXM Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization.
arm64: dts: amlogic: use the new USB control driver for GXL and GXM Add the correcly architectured USB Glue node and adapt all the Amlogic GXL and GXM board to the new organization. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20200326134507.4808-11-narmstrong@baylibre.com
show more ...
|