Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46 |
|
#
1b9dac68 |
| 06-Jun-2022 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: Use constants for RTC clock indexes
The binding header provides descriptive names for the RTC clock indexes, since the indexes were arbitrarily chosen by the binding, not by t
arm64: dts: allwinner: Use constants for RTC clock indexes
The binding header provides descriptive names for the RTC clock indexes, since the indexes were arbitrarily chosen by the binding, not by the hardware. Let's use the names, so the meaning is clearer.
Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220607012438.18183-2-samuel@sholland.org
show more ...
|
Revision tags: v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
531fdbee |
| 03-Jan-2021 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
On boards where the only peripheral connected to PL0/PL1 is an X-Powers PMIC, configure the connection to use the RSB bus rather than th
arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection
On boards where the only peripheral connected to PL0/PL1 is an X-Powers PMIC, configure the connection to use the RSB bus rather than the I2C bus. Compared to the I2C controller that shares the pins, the RSB controller allows a higher bus frequency, and it is more CPU-efficient.
Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210103100007.32867-5-samuel@sholland.org
show more ...
|
#
73088dfe |
| 17-Jan-2021 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: Use the new r_intc binding
The binding of R_INTC was updated to allow specifying interrupts other than the external NMI, since routing those interrupts through the R_INTC driv
arm64: dts: allwinner: Use the new r_intc binding
The binding of R_INTC was updated to allow specifying interrupts other than the external NMI, since routing those interrupts through the R_INTC driver allows using them for wakeup.
Update the device trees to use the new binding.
Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
e299e6dd |
| 14-Jan-2021 |
Maxime Ripard <maxime@cerno.tech> |
ARM: dts: sunxi: Fix the LED node names
According to the LED bindings, the LED node names are supposed to be led plus an optional suffix. Let's fix our users to use that new scheme.
Signed-off-by:
ARM: dts: sunxi: Fix the LED node names
According to the LED bindings, the LED node names are supposed to be led plus an optional suffix. Let's fix our users to use that new scheme.
Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20210114113538.1233933-6-maxime@cerno.tech
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34 |
|
#
ebae33c3 |
| 20-Apr-2020 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3
Enable CPU opp tables for Orange Pi 3.
This needs to change the CPU regulator max voltage to fit the OPP table.
Also add the ramp-d
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3
Enable CPU opp tables for Orange Pi 3.
This needs to change the CPU regulator max voltage to fit the OPP table.
Also add the ramp-delay information to avoid any out of spec running as the regulator is slower at reaching the voltage requested compare to the PLL reaching the frequency.
There is no such information for AXP805 but similar PMIC (AXP813) has a DVM (Dynamic Voltage scaling Management) ramp rate equal to 2500uV/us.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25 |
|
#
32507b86 |
| 08-Mar-2020 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
It turns out that not all H6 boards have external 32kHz oscillator. Currently the only one known such H6 board is Tanix TX6.
Move extern
arm64: dts: allwinner: h6: Move ext. oscillator to board DTs
It turns out that not all H6 boards have external 32kHz oscillator. Currently the only one known such H6 board is Tanix TX6.
Move external oscillator node from common H6 dtsi to board specific dts files where present.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19 |
|
#
221a6904 |
| 10-Feb-2020 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: h6: orangepi-3: Add eMMC node
OrangePi 3 can optionally have 8 GiB eMMC (soldered on board). Because those pins are dedicated to eMMC exclusively, node can be added for both v
arm64: dts: allwinner: h6: orangepi-3: Add eMMC node
OrangePi 3 can optionally have 8 GiB eMMC (soldered on board). Because those pins are dedicated to eMMC exclusively, node can be added for both variants (with and without eMMC). Kernel will then scan bus for presence of eMMC and act accordingly.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
cabbaed7 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: unify header comment style
Allwinner device tree files used different comment style for copyright notice.
Update this to keep a coherency.
Signed-off-by: Clément Péron <pero
arm64: dts: allwinner: unify header comment style
Allwinner device tree files used different comment style for copyright notice.
Update this to keep a coherency.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.3 |
|
#
012af553 |
| 09-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwiner: Fix typo in dual licensed SPDX identifier
With dual licensed SPDX identifier the "OR" should be uppercase.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: M
arm64: dts: allwiner: Fix typo in dual licensed SPDX identifier
With dual licensed SPDX identifier the "OR" should be uppercase.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10 |
|
#
2c63afda |
| 09-Nov-2019 |
Andre Heider <a.heider@gmail.com> |
arm64: dts: allwinner: orange-pi-3: Enable IR receiver
Orange Pi 3 has an on-board IR receiver, enable it.
Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@
arm64: dts: allwinner: orange-pi-3: Enable IR receiver
Orange Pi 3 has an on-board IR receiver, enable it.
Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.9, v5.3.8 |
|
#
b5d84ff8 |
| 20-Oct-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support
Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0
arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support
Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0 port. All four ports are exposed via USB3-A connectors. VBUS is always on, since it's powered directly from DCIN (VCC-5V) and not switchable.
Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
8abc4c4a |
| 30-Oct-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Add mali GPU supply for H6 boards
Enable and add supply to the Mali GPU node on all the H6 boards.
Regarding the datasheet the maximum time for supply to reach its voltage is
arm64: dts: allwinner: Add mali GPU supply for H6 boards
Enable and add supply to the Mali GPU node on all the H6 boards.
Regarding the datasheet the maximum time for supply to reach its voltage is 32ms.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.7, v5.3.6 |
|
#
35117046 |
| 07-Oct-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
The board contains AP6256 WiFi/BT module that has its bluetooth part connected to SoC's UART1 port. Enable this port, and add node for th
arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
The board contains AP6256 WiFi/BT module that has its bluetooth part connected to SoC's UART1 port. Enable this port, and add node for the bluetooth device.
Bluetooth part is named bcm4345c5.
You'll need a BCM4345C5.hcd firmware file that can be found in the Xulongs's repository for H6:
https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256
The driver expects the firmware at the following path relative to the firmware directory:
brcm/BCM4345C5.hcd
Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
show more ...
|
Revision tags: v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10 |
|
#
15ede970 |
| 23-Aug-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: orange-pi-3: Enable WiFi
Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called bcm43356 and can be used with the brcmfmac driver. The module is powered by t
arm64: dts: allwinner: orange-pi-3: Enable WiFi
Orange Pi 3 has AP6256 WiFi/BT module. WiFi part of the module is called bcm43356 and can be used with the brcmfmac driver. The module is powered by the two always on regulators (not AXP805).
WiFi uses a PG port with 1.8V voltage level signals. SoC needs to be configured so that it sets up an 1.8V input bias on this port. This is done by the pio driver by reading the vcc-pg-supply voltage.
You'll need a fw_bcm43456c5_ag.bin firmware file and nvram.txt configuration that can be found in the Xulongs's repository for H6:
https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256
Mainline brcmfmac driver expects the firmware and nvram at the following paths relative to the firmware directory:
brcm/brcmfmac43456-sdio.bin brcm/brcmfmac43456-sdio.txt
Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.2.9, v5.2.8, v5.2.7 |
|
#
802cbe1b |
| 06-Aug-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: orange-pi-3: Enable HDMI output
Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC I2C bus voltage shifter. Before EDID can be read, we need to pull PH
arm64: dts: allwinner: orange-pi-3: Enable HDMI output
Orange Pi 3 has a DDC_CEC_EN signal connected to PH2, that enables the DDC I2C bus voltage shifter. Before EDID can be read, we need to pull PH2 high. This is realized by the ddc-en-gpios property.
Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3, v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8 |
|
#
8fe62f12 |
| 08-Apr-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
Orange Pi 3 is a H6 based SBC made by Xulong, released in January 2019. It has the following features:
- Allwinner H6 quad-core 64-bit ARM Cortex-A53
arm64: dts: allwinner: h6: Add Orange Pi 3 DTS
Orange Pi 3 is a H6 based SBC made by Xulong, released in January 2019. It has the following features:
- Allwinner H6 quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB or 2GB LPDDR3 RAM - AXP805 PMIC - AP6256 Wifi/BT 5.0 - USB 2.0 host port (A) - USB 2.0 micro usb, OTG - USB 3.0 Host + 4 port USB hub (GL3510) - Gigabit Ethernet (Realtek RTL8211E phy) - HDMI 2.0 port - soldered eMMC (optional) - 3x LED (one is on the bottom) - microphone - audio jack - PCIe
Add basic support for the board.
Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34 |
|
#
ebae33c3 |
| 20-Apr-2020 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3 Enable CPU opp tables for Orange Pi 3. This needs to change the CPU regulator max voltage to fit the OPP table.
arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3 Enable CPU opp tables for Orange Pi 3. This needs to change the CPU regulator max voltage to fit the OPP table. Also add the ramp-delay information to avoid any out of spec running as the regulator is slower at reaching the voltage requested compare to the PLL reaching the frequency. There is no such information for AXP805 but similar PMIC (AXP813) has a DVM (Dynamic Voltage scaling Management) ramp rate equal to 2500uV/us. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25 |
|
#
32507b86 |
| 08-Mar-2020 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: h6: Move ext. oscillator to board DTs It turns out that not all H6 boards have external 32kHz oscillator. Currently the only one known such H6 board is Tanix TX6.
arm64: dts: allwinner: h6: Move ext. oscillator to board DTs It turns out that not all H6 boards have external 32kHz oscillator. Currently the only one known such H6 board is Tanix TX6. Move external oscillator node from common H6 dtsi to board specific dts files where present. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19 |
|
#
221a6904 |
| 10-Feb-2020 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: h6: orangepi-3: Add eMMC node OrangePi 3 can optionally have 8 GiB eMMC (soldered on board). Because those pins are dedicated to eMMC exclusively, node can be adde
arm64: dts: allwinner: h6: orangepi-3: Add eMMC node OrangePi 3 can optionally have 8 GiB eMMC (soldered on board). Because those pins are dedicated to eMMC exclusively, node can be added for both variants (with and without eMMC). Kernel will then scan bus for presence of eMMC and act accordingly. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
cabbaed7 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.3 |
|
#
012af553 |
| 09-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwiner: Fix typo in dual licensed SPDX identifier With dual licensed SPDX identifier the "OR" should be uppercase. Signed-off-by: Clément Péron <peron.clem@gmail.c
arm64: dts: allwiner: Fix typo in dual licensed SPDX identifier With dual licensed SPDX identifier the "OR" should be uppercase. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10 |
|
#
2c63afda |
| 09-Nov-2019 |
Andre Heider <a.heider@gmail.com> |
arm64: dts: allwinner: orange-pi-3: Enable IR receiver Orange Pi 3 has an on-board IR receiver, enable it. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Jernej Skra
arm64: dts: allwinner: orange-pi-3: Enable IR receiver Orange Pi 3 has an on-board IR receiver, enable it. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.9, v5.3.8 |
|
#
b5d84ff8 |
| 20-Oct-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the S
arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3 board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0 port. All four ports are exposed via USB3-A connectors. VBUS is always on, since it's powered directly from DCIN (VCC-5V) and not switchable. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
8abc4c4a |
| 30-Oct-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Add mali GPU supply for H6 boards Enable and add supply to the Mali GPU node on all the H6 boards. Regarding the datasheet the maximum time for supply to
arm64: dts: allwinner: Add mali GPU supply for H6 boards Enable and add supply to the Mali GPU node on all the H6 boards. Regarding the datasheet the maximum time for supply to reach its voltage is 32ms. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.7, v5.3.6 |
|
#
35117046 |
| 07-Oct-2019 |
Ondrej Jirman <megous@megous.com> |
arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth The board contains AP6256 WiFi/BT module that has its bluetooth part connected to SoC's UART1 port. Enable this port, and add
arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth The board contains AP6256 WiFi/BT module that has its bluetooth part connected to SoC's UART1 port. Enable this port, and add node for the bluetooth device. Bluetooth part is named bcm4345c5. You'll need a BCM4345C5.hcd firmware file that can be found in the Xulongs's repository for H6: https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256 The driver expects the firmware at the following path relative to the firmware directory: brcm/BCM4345C5.hcd Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <mripard@kernel.org>
show more ...
|