Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43, v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31, v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80, v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61, v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37 |
|
#
50612cf9 |
| 30-Apr-2022 |
Harald Geyer <harald@ccbib.org> |
arm64: dts: allwinner: teres-i: Add GPIO port regulators
Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL.
Signed-off-by: Harald Geyer <harald@ccbib.org> Reviewed-by: Samuel Hollan
arm64: dts: allwinner: teres-i: Add GPIO port regulators
Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL.
Signed-off-by: Harald Geyer <harald@ccbib.org> Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220430191009.73946-1-harald@ccbib.org
show more ...
|
Revision tags: v5.15.36, v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15, v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13 |
|
#
d900a1cd |
| 16-Oct-2021 |
Arnaud Ferraris <arnaud.ferraris@collabora.com> |
arm64: dts: allwinner: add 'chassis-type' property
A new 'chassis-type' root node property has recently been approved for the device-tree specification, in order to provide a simple way for userspac
arm64: dts: allwinner: add 'chassis-type' property
A new 'chassis-type' root node property has recently been approved for the device-tree specification, in order to provide a simple way for userspace to detect the device form factor and adjust their behavior accordingly.
This patch fills in this property for end-user devices (such as laptops, smartphones and tablets) based on Allwinner ARM64 processors.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20211016102025.23346-2-arnaud.ferraris@collabora.com
show more ...
|
Revision tags: v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62 |
|
#
a1830fe9 |
| 01-Sep-2021 |
Maxime Ripard <maxime@cerno.tech> |
arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC
Neither the binding nor the driver make any use of the wakeup-source property for the AXP803. Remove it.
Signed-off-by: Maxime Ri
arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC
Neither the binding nor the driver make any use of the wakeup-source property for the AXP803. Remove it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-53-maxime@cerno.tech
show more ...
|
#
01312f74 |
| 01-Sep-2021 |
Maxime Ripard <maxime@cerno.tech> |
arm64: dts: allwinner: teres-i: Add missing reg
The anx6345 bridge mandates that the input port is named port@0. Since we have a unit-address, this implies that we need a reg property with the same
arm64: dts: allwinner: teres-i: Add missing reg
The anx6345 bridge mandates that the input port is named port@0. Since we have a unit-address, this implies that we need a reg property with the same value, but it was found to be missing in the Teres-I device tree. Make sure it's there.
Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20210901091852.479202-52-maxime@cerno.tech
show more ...
|
Revision tags: v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12, v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18, v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14 |
|
#
73088dfe |
| 17-Jan-2021 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: Use the new r_intc binding
The binding of R_INTC was updated to allow specifying interrupts other than the external NMI, since routing those interrupts through the R_INTC driv
arm64: dts: allwinner: Use the new r_intc binding
The binding of R_INTC was updated to allow specifying interrupts other than the external NMI, since routing those interrupts through the R_INTC driver allows using them for wakeup.
Update the device trees to use the new binding.
Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
e299e6dd |
| 14-Jan-2021 |
Maxime Ripard <maxime@cerno.tech> |
ARM: dts: sunxi: Fix the LED node names
According to the LED bindings, the LED node names are supposed to be led plus an optional suffix. Let's fix our users to use that new scheme.
Signed-off-by:
ARM: dts: sunxi: Fix the LED node names
According to the LED bindings, the LED node names are supposed to be led plus an optional suffix. Let's fix our users to use that new scheme.
Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20210114113538.1233933-6-maxime@cerno.tech
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
#
631e6a35 |
| 25-Jul-2020 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Update codec widget names
The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various device trees
arm64: dts: allwinner: a64: Update codec widget names
The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various device trees to use the new widget names.
Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200726012557.38282-7-samuel@sholland.org
show more ...
|
Revision tags: v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9 |
|
#
ac904843 |
| 07-Jan-2020 |
Vasily Khoruzhick <anarsoul@gmail.com> |
arm64: dts: allwinner: a64: enable DVFS
Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS.
Signed-off-by: Vasily Khoruzhick <anarsoul@g
arm64: dts: allwinner: a64: enable DVFS
Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
cabbaed7 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: unify header comment style
Allwinner device tree files used different comment style for copyright notice.
Update this to keep a coherency.
Signed-off-by: Clément Péron <pero
arm64: dts: allwinner: unify header comment style
Allwinner device tree files used different comment style for copyright notice.
Update this to keep a coherency.
Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9 |
|
#
79bc02f1 |
| 29-Oct-2019 |
Torsten Duwe <duwe@lst.de> |
arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I
Teres-I has an anx6345 bridge connected to the RGB666 LCD output, and the I2C controlling signals are connected to I2C0 bus.
Enable it i
arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I
Teres-I has an anx6345 bridge connected to the RGB666 LCD output, and the I2C controlling signals are connected to I2C0 bus.
Enable it in the device tree, and enable the display engine, video mixer and tcon0 as well.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3 |
|
#
439152ae |
| 16-May-2019 |
Harald Geyer <harald@ccbib.org> |
arm64: dts: allwinner: a64: Enable audio on Teres-I
The TERES-I has internal speakers (left, right), internal microphone and a headset combo jack (headphones + mic), "CTIA" (android) pinout.
The he
arm64: dts: allwinner: a64: Enable audio on Teres-I
The TERES-I has internal speakers (left, right), internal microphone and a headset combo jack (headphones + mic), "CTIA" (android) pinout.
The headphone and mic detect lines of the A64 are connected properly, but AFAIK currently unsupported by the driver.
Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12 |
|
#
70f76289 |
| 03-May-2019 |
Jagan Teki <jagan@amarulasolutions.com> |
arm64: dts: allwinner: a64: move I2C pinctrl to dtsi
There is only one pinmuxing available for each I2C controller.
So, move pinctrl for i2c0, i2c1 from board dts files into SoC dtsi.
By moving th
arm64: dts: allwinner: a64: move I2C pinctrl to dtsi
There is only one pinmuxing available for each I2C controller.
So, move pinctrl for i2c0, i2c1 from board dts files into SoC dtsi.
By moving these pinctrls the i2c1 node from Nanopi A64 just have a status, which is disabled already so remove the entire node from it.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21 |
|
#
24bd5d2c |
| 09-Feb-2019 |
Harald Geyer <harald@ccbib.org> |
arm64: dts: allwinner: a64: teres-i: enable backlight
Enable pwm and add a pretty standard backlight node.
The regulator is always on, but we include it anyway, because it is required by the bindin
arm64: dts: allwinner: a64: teres-i: enable backlight
Enable pwm and add a pretty standard backlight node.
The regulator is always on, but we include it anyway, because it is required by the binding document.
Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.19.20, v4.19.19 |
|
#
25f6f54f |
| 30-Jan-2019 |
Harald Geyer <harald@ccbib.org> |
arm64: dts: allwinner: a64: teres-i: enable power supplies
TERES-I has ACIN connector and battery.
Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin
arm64: dts: allwinner: a64: teres-i: enable power supplies
TERES-I has ACIN connector and battery.
Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.19.18, v4.19.17, v4.19.16 |
|
#
062904f2 |
| 13-Jan-2019 |
Jonathan Neuschäfer <j.neuschaefer@gmx.net> |
arm64: dts: allwinner: a64: Fix a typo
This typo inverted the meaning of the comment, but the rest of the comment and the code reveal that the regulator in question needs to be on at all times.
Sig
arm64: dts: allwinner: a64: Fix a typo
This typo inverted the meaning of the comment, but the rest of the comment and the code reveal that the regulator in question needs to be on at all times.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6 |
|
#
d91ebb95 |
| 28-Aug-2018 |
Chen-Yu Tsai <wens@csie.org> |
arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins
The pinmux name and label for a specific function should denote which pingroup it is on, or if there is only one option for the
arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins
The pinmux name and label for a specific function should denote which pingroup it is on, or if there is only one option for the function, have not enumerating prefix/suffix at all.
The "uart0_pins_a" label is renamed to "uart0_pb_pins" to fit our current style. The node name "uart0" is also changed to "uart0-pb-pins" to match.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12, v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3 |
|
#
5cbef9f9 |
| 22-Jun-2018 |
Icenowy Zheng <icenowy@aosc.io> |
arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi
On usual A64 board design the power of HDMI controller is connected to DLDO1 of the AXP803 PMIC. If this regulator is shut do
arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi
On usual A64 board design the power of HDMI controller is connected to DLDO1 of the AXP803 PMIC. If this regulator is shut down, the HDMI output will be blank. Therefore the simplefb driver should keep this regulator on.
Add the regulator to all currently available A64 boards' simplefb_hdmi device node, if the board is capable of outputing HDMI.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
#
48f3e7bf |
| 22-Jun-2018 |
Icenowy Zheng <icenowy@aosc.io> |
arm64: allwinner: a64: allow laptops to wake up from lid
Currently all ARM kernels will have s2idle enabled if CONFIG_SUSPEND is present. In this case if the lid is closed, systemd-logind will enter
arm64: allwinner: a64: allow laptops to wake up from lid
Currently all ARM kernels will have s2idle enabled if CONFIG_SUSPEND is present. In this case if the lid is closed, systemd-logind will enter s2idle mode by default; however there's no possible wakeup source defined, so the system will enter a forever idle.
Add the lid itself as a wakeup source, thus the system can wakeup when the lid is opened.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
#
e4357c82 |
| 22-Jun-2018 |
Icenowy Zheng <icenowy@aosc.io> |
arm64: allwinner: a64: change TERES-I DLDO3's name to start with "vdd"
Originally the name of the DLDO3 regulator on TERES-I is "eDP12", which is not consistent with other regulator names.
Change i
arm64: allwinner: a64: change TERES-I DLDO3's name to start with "vdd"
Originally the name of the DLDO3 regulator on TERES-I is "eDP12", which is not consistent with other regulator names.
Change it to "vdd-edp", in order to make it more consistent.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.17.2, v4.17.1, v4.17, v4.16 |
|
#
c916eb95 |
| 15-Mar-2018 |
Harald Geyer <harald@ccbib.org> |
arm64: dts: allwinner: a64: Add support for TERES-I laptop
The TERES-I is an open hardware laptop built by Olimex using the Allwinner A64 SoC.
Add the board specific .dts file, which includes the A
arm64: dts: allwinner: a64: Add support for TERES-I laptop
The TERES-I is an open hardware laptop built by Olimex using the Allwinner A64 SoC.
Add the board specific .dts file, which includes the A64 .dtsi and enables the peripherals that we support so far.
Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
#
631e6a35 |
| 25-Jul-2020 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Update codec widget names The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various
arm64: dts: allwinner: a64: Update codec widget names The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various device trees to use the new widget names. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200726012557.38282-7-samuel@sholland.org
show more ...
|
Revision tags: v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9 |
|
#
ac904843 |
| 07-Jan-2020 |
Vasily Khoruzhick <anarsoul@gmail.com> |
arm64: dts: allwinner: a64: enable DVFS Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS. Signed-off-by: Vasily Kh
arm64: dts: allwinner: a64: enable DVFS Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
cabbaed7 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9 |
|
#
79bc02f1 |
| 29-Oct-2019 |
Torsten Duwe <duwe@lst.de> |
arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I Teres-I has an anx6345 bridge connected to the RGB666 LCD output, and the I2C controlling signals are connected to I2C0 bus.
arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I Teres-I has an anx6345 bridge connected to the RGB666 LCD output, and the I2C controlling signals are connected to I2C0 bus. Enable it in the device tree, and enable the display engine, video mixer and tcon0 as well. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3, v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8, v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3 |
|
#
439152ae |
| 16-May-2019 |
Harald Geyer <harald@ccbib.org> |
arm64: dts: allwinner: a64: Enable audio on Teres-I The TERES-I has internal speakers (left, right), internal microphone and a headset combo jack (headphones + mic), "CTIA" (android) pin
arm64: dts: allwinner: a64: Enable audio on Teres-I The TERES-I has internal speakers (left, right), internal microphone and a headset combo jack (headphones + mic), "CTIA" (android) pinout. The headphone and mic detect lines of the A64 are connected properly, but AFAIK currently unsupported by the driver. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Torsten Duwe <duwe@suse.de> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|