#
3131cfb6 |
| 30-Jul-2018 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Orange Pi Win: Enable USB hub regulator
The Orange Pi Win has four standard USB-A sockets, connected to an on-board USB hub. The hub's and socket's power regulators are e
arm64: dts: allwinner: a64: Orange Pi Win: Enable USB hub regulator
The Orange Pi Win has four standard USB-A sockets, connected to an on-board USB hub. The hub's and socket's power regulators are enabled by GPIO PD7.
Add the regulator to the DT to enable the power supply.
Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
09b964af |
| 30-Jul-2018 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Orange Pi Win: Fix SD card node
The Orange Pi Win has a microSD card slot which is connected via all four SD data lines. As the DT was not mentioning this fact, we got th
arm64: dts: allwinner: a64: Orange Pi Win: Fix SD card node
The Orange Pi Win has a microSD card slot which is connected via all four SD data lines. As the DT was not mentioning this fact, we got the default single bit transfers, losing out on performance. Also, as microSD does not have a write protect switch, we disable this feature in the DT node.
Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
Revision tags: v4.17.11, v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3 |
|
#
5cbef9f9 |
| 22-Jun-2018 |
Icenowy Zheng <icenowy@aosc.io> |
arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi
On usual A64 board design the power of HDMI controller is connected to DLDO1 of the AXP803 PMIC. If this regulator is shut do
arm64: dts: allwinner: a64: add HDMI regulator to all DTs' simplefb_hdmi
On usual A64 board design the power of HDMI controller is connected to DLDO1 of the AXP803 PMIC. If this regulator is shut down, the HDMI output will be blank. Therefore the simplefb driver should keep this regulator on.
Add the regulator to all currently available A64 boards' simplefb_hdmi device node, if the board is capable of outputing HDMI.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.17.2, v4.17.1, v4.17, v4.16, v4.15 |
|
#
b75cb68d |
| 22-Dec-2017 |
Tuomas Tynkkynen <tuomas@tuxera.com> |
arm64: dts: sunxi: Switch MMC nodes away from cd-inverted property
Using the cd-inverted property is not useful when GPIOs are used as card detects since the polarity can be specified with the usual
arm64: dts: sunxi: Switch MMC nodes away from cd-inverted property
Using the cd-inverted property is not useful when GPIOs are used as card detects since the polarity can be specified with the usual GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for U-Boot developers, so migrate all sunxi boards away from cd-inverted.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.13.16 |
|
#
e5701010 |
| 23-Nov-2017 |
Jagan Teki <jagannadh.teki@gmail.com> |
arm64: allwinner: a64: Enable AXP803 for Orangepi Win
Enable AXP803 PMIC and regulators for Orangepi Win.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime
arm64: allwinner: a64: Enable AXP803 for Orangepi Win
Enable AXP803 PMIC and regulators for Orangepi Win.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v4.14, v4.13.5, v4.13, v4.12 |
|
#
bdecc9cb |
| 12-Jun-2017 |
Jagan Teki <jagan@amarulasolutions.com> |
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC.
A64 Orangepi Win/WinPlus has - A64 Quad-cor
arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support
Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC.
A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
show more ...
|
Revision tags: v5.10, v5.8.17 |
|
#
d7cdff44 |
| 22-Oct-2020 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node RX/TX delay on OrangePi Win board is set on PHY. Reflect that in ethernet node. Fixes: 93d6a27cfcc0 ("arm64: dts: all
arm64: dts: allwinner: a64: OrangePi Win: Fix ethernet node RX/TX delay on OrangePi Win board is set on PHY. Reflect that in ethernet node. Fixes: 93d6a27cfcc0 ("arm64: dts: allwinner: a64: Orange Pi Win: Add Ethernet node") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201022185839.2779245-1-jernej.skrabec@siol.net
show more ...
|
Revision tags: v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54 |
|
#
631e6a35 |
| 25-Jul-2020 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Update codec widget names The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various
arm64: dts: allwinner: a64: Update codec widget names The sun8i-codec driver introduced a new set of DAPM widgets that more accurately describe the hardware topology. Update the various device trees to use the new widget names. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20200726012557.38282-7-samuel@sholland.org
show more ...
|
Revision tags: v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43, v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9 |
|
#
ac904843 |
| 07-Jan-2020 |
Vasily Khoruzhick <anarsoul@gmail.com> |
arm64: dts: allwinner: a64: enable DVFS Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS. Signed-off-by: Vasily Kh
arm64: dts: allwinner: a64: enable DVFS Add CPU regulator and operating points for all the A64-based boards that are currently supported to enable DVFS. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4 |
|
#
cabbaed7 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed
arm64: dts: allwinner: unify header comment style Allwinner device tree files used different comment style for copyright notice. Update this to keep a coherency. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
b4b8f2c9 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Convert license to SPDX identifier Use a shorter SPDX identifier instead of pasting the whole license. Signed-off-by: Clément Péron <peron.clem@gmail.com>
arm64: dts: allwinner: Convert license to SPDX identifier Use a shorter SPDX identifier instead of pasting the whole license. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
#
d2ab1a67 |
| 14-Dec-2019 |
Clément Péron <peron.clem@gmail.com> |
arm64: dts: allwinner: Fix wrong license header Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associ
arm64: dts: allwinner: Fix wrong license header Some headers specify that files are under dual-licensed GPL2.0+ and X11. But in fact, it turns out that the full licenses texts associated are GPL2.0+ and MIT. Fix license headers to reflect real licenses associated. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
show more ...
|
Revision tags: v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9, v5.3.8, v5.3.7, v5.3.6, v5.3.5, v5.3.4, v5.3.3 |
|
#
6db1aaf4 |
| 03-Oct-2019 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: orangepi-win: Enable audio codec This patch enables internal audio codec on OrangePi Win board by enabling all relevant nodes and adding appropriate routing.
arm64: dts: allwinner: a64: orangepi-win: Enable audio codec This patch enables internal audio codec on OrangePi Win board by enabling all relevant nodes and adding appropriate routing. Board has on-board microphone (MIC1) and 3.5 mm jack with stereo audio and microphone (MIC2). Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <mripard@kernel.org>
show more ...
|
Revision tags: v5.3.2, v5.3.1, v5.3, v5.2.14, v5.3-rc8, v5.2.13, v5.2.12, v5.2.11, v5.2.10, v5.2.9, v5.2.8, v5.2.7, v5.2.6, v5.2.5, v5.2.4, v5.2.3, v5.2.2, v5.2.1, v5.2, v5.1.16, v5.1.15, v5.1.14, v5.1.13, v5.1.12, v5.1.11, v5.1.10, v5.1.9, v5.1.8 |
|
#
63eb1e14 |
| 07-Jun-2019 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: Enable IR on Orange Pi Win OrangePi Win board contains IR receiver. Enable it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
arm64: dts: allwinner: a64: Enable IR on Orange Pi Win OrangePi Win board contains IR receiver. Enable it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v5.1.7, v5.1.6, v5.1.5, v5.1.4, v5.1.3 |
|
#
85c6fadd |
| 14-May-2019 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side identifies as BCM43430, while the Bluetooth
arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes The AP6212 is based on the Broadcom BCM43430 or BCM43438. The WiFi side identifies as BCM43430, while the Bluetooth side identifies as BCM43438. WiFi is connected to mmc1 and the Bluetooth side is connected to UART1 in a 4 wire configuration. Same as the WiFi side, due to being the same chip and package, DLDO2 provides overall power via VBAT, and DLDO4 provides I/O power via VDDIO. The RTC clock output provides the LPO low power clock at 32.768 kHz. This patch enables WiFi and Bluetooth on OrangePi Win boards and adds missing LPO clock on the WiFi side. PCM connection also exists for Bluetooth audio, but it's not used here. Bluetooth UART speed is set to 1.5 MBaud in order to be able transmit audio. While module supports even higher speeds, currently sunxi clock driver doesn't support higher speed. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
#
6ad63dec |
| 06-Mar-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC device tree updates from Arnd Bergmann: "This is a smaller update than the past few times, bu
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC device tree updates from Arnd Bergmann: "This is a smaller update than the past few times, but with just over 500 non-merge changesets still dwarfes the rest of the SoC tree. Three new SoC platforms get added, each one a follow-up to an existing product, and added here in combination with a reference platform: - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics Applications": https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X These are actual commercial products we now support with an in-kernel device tree source file: - Bosch Guardian is a product made by Bosch Power Tools GmbH, based on the Texas Instruments AM335x chip - Winterland IceBoard is a Texas Instruments AM3874 based machine used in telescopes at the south pole and elsewhere, see commit d031773169df2 for some pointers: - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500 baseboard management controller. This is for running on the BMC. - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch used in airplanes. - Phicomm K3 is a WiFi router based on Broadcom bcm47094 - Methode Electronics uDPU FTTdp distribution point unit - X96 Max, a generic TV box based on Amlogic G12a (S905X2) - NVIDIA Shield TV (Darcy) based on Tegra210 And then there are several new SBC, evaluation, development or modular systems that we add: - Three new Rockchips rk3399 based boards: - FriendlyElec NanoPC-T4 and NanoPi M4 - Radxa ROCK Pi 4 - Five new i.MX6 family SoM modules and boards for industrial products: - Logic PD i.MX6QD SoM and evaluation baseboad - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357 microcontroller - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system in 96boards form factor - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual platform for corresponding to the latest "fast model" - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit and 64-bit mode. - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards enterprise form factor - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108 For already supported boards and SoCs, we often add support for new devices after merging the drivers. This time, the largest changes include updates for - STMicroelectronics stm32mp1, which was now formally launched last week - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip - Action Semi S700 - TI AM654x, their recently merged 64-bit SoC from the OMAP family - Various Amlogic Meson SoCs - Mediatek MT2712 - NVIDIA Tegra186 and Tegra210 - The ancient NXP lpc32xx family - Samsung s5pv210, used in some older mobile phones Many other chips see smaller updates and bugfixes beyond that" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits) ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4 dt-bindings: net: ti: deprecate cpsw-phy-sel bindings ARM: dts: am335x: switch to use phy-gmii-sel ARM: dts: am4372: switch to use phy-gmii-sel ARM: dts: dm814x: switch to use phy-gmii-sel ARM: dts: dra7: switch to use phy-gmii-sel arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference ARM: dts: exynos: Add support for secondary DAI to Odroid XU4 ARM: dts: exynos: Add support for secondary DAI to Odroid XU3 ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite ARM: dts: exynos: Add stdout path property to Arndale board ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU ARM: dts: exynos: Enable ADC on Odroid HC1 arm64: dts: sprd: Remove wildcard compatible string arm64: dts: sprd: Add SC27XX fuel gauge device arm64: dts: sprd: Add SC2731 charger device arm64: dts: sprd: Add ADC calibration support arm64: dts: sprd: Remove PMIC INTC irq trigger type arm64: dts: rockchip: Enable tsadc device on rock960 ARM: dts: rockchip: add chosen node on veyron devices ...
show more ...
|
Revision tags: v5.1.2, v5.1.1, v5.0.14, v5.1, v5.0.13, v5.0.12, v5.0.11, v5.0.10, v5.0.9, v5.0.8, v5.0.7, v5.0.6, v5.0.5, v5.0.4, v5.0.3, v4.19.29, v5.0.2, v4.19.28, v5.0.1, v4.19.27, v5.0, v4.19.26, v4.19.25, v4.19.24, v4.19.23, v4.19.22, v4.19.21, v4.19.20 |
|
#
a24270af |
| 05-Feb-2019 |
Chen-Yu Tsai <wens@csie.org> |
arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards On these A64 devices, the DC input jacks are wired to the ACIN pins of the PMIC, which is represented by the AC p
arm64: dts: allwinner: a64: Enable PMIC power supplies on various boards On these A64 devices, the DC input jacks are wired to the ACIN pins of the PMIC, which is represented by the AC power supply. With the exception of the Nanopi A64, all devices include LiPo batteries or have connectors for them, which are represented by the battery power supply. Enable these power supplies in the device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.19.19, v4.19.18, v4.19.17, v4.19.16, v4.19.15 |
|
#
b1360dcf |
| 09-Jan-2019 |
Jernej Skrabec <jernej.skrabec@siol.net> |
arm64: dts: allwinner: a64: Fix USB OTG regulator Currently, AXP803 driver assumes that reg_drivevbus is input which is wrong. Unfortunate consequence of that is that none of the USB por
arm64: dts: allwinner: a64: Fix USB OTG regulator Currently, AXP803 driver assumes that reg_drivevbus is input which is wrong. Unfortunate consequence of that is that none of the USB ports work on the board, even USB HOST port, because USB PHY driver probing fails due to missing regulator. Fix that by adding "x-powers,drive-vbus-en" property to AXP803 node. Fixes: 14ff5d8f9151 ("arm64: dts: allwinner: a64: Orange Pi Win: Enable USB OTG socket") Cc: stable@vger.kernel.org Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
show more ...
|
Revision tags: v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10 |
|
#
f4e4453a |
| 25-Sep-2018 |
Jagan Teki <jagan@amarulasolutions.com> |
arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI Enable all necessary device tree nodes and add connector node to device trees for all supported A64 boards with HDMI.
arm64: dts: allwinner: a64: Enable HDMI output on A64 boards w/ HDMI Enable all necessary device tree nodes and add connector node to device trees for all supported A64 boards with HDMI. Jagan, tested on BPI-M64, OPI-Win, A64-Olinuxino, NPI-A64 Vasily, tested on pine64-lts Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> [Icenowy: squash all board patches altogether and change supply name] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Tested-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
Revision tags: v4.18.9, v4.18.7, v4.18.6 |
|
#
d91ebb95 |
| 28-Aug-2018 |
Chen-Yu Tsai <wens@csie.org> |
arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins The pinmux name and label for a specific function should denote which pingroup it is on, or if there is only one op
arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins The pinmux name and label for a specific function should denote which pingroup it is on, or if there is only one option for the function, have not enumerating prefix/suffix at all. The "uart0_pins_a" label is renamed to "uart0_pb_pins" to fit our current style. The node name "uart0" is also changed to "uart0-pb-pins" to match. Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
Revision tags: v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14, v4.17.13, v4.17.12 |
|
#
eacd9c43 |
| 30-Jul-2018 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails The Orange Pi Win board uses the AXP's ALDO1 power rail to drive the VCC-CSI line, which, according to the schematic, ne
arm64: dts: allwinner: a64: Orange Pi Win: Adjust CSI power rails The Orange Pi Win board uses the AXP's ALDO1 power rail to drive the VCC-CSI line, which, according to the schematic, needs to be set to 2.8V. Also the ELDO3 power rail is connected to the CSI, with somewhat unclear voltage requirements. Add this regulator and allow the voltage to be set between 1.5V and 1.8V, which are the voltages mentioned in the schematic. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
d8174422 |
| 30-Jul-2018 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node The Orange Pi Win comes with 2 MB SPI flash, add the node. Signed-off-by: Samuel Holland <samuel@sholland.org> Sign
arm64: dts: allwinner: a64: Orange Pi Win: Add SPI flash node The Orange Pi Win comes with 2 MB SPI flash, add the node. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
64971e5a |
| 30-Jul-2018 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node The Orange Pi Win features a soldered WiFi chip on the board, connected via the SDIO interface. Add the required DT nodes.
arm64: dts: allwinner: a64: Orange Pi Win: Add SDIO node The Orange Pi Win features a soldered WiFi chip on the board, connected via the SDIO interface. Add the required DT nodes. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
e71cc560 |
| 30-Jul-2018 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Orange Pi Win: Add LED node The Orange Pi Win has a green status LED, add the DT node for it. Signed-off-by: Samuel Holland <samuel@sholland.org> Sig
arm64: dts: allwinner: a64: Orange Pi Win: Add LED node The Orange Pi Win has a green status LED, add the DT node for it. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|
#
13b31e6b |
| 30-Jul-2018 |
Samuel Holland <samuel@sholland.org> |
arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs The Orange Pi Win exposes several UARTs on header pins, and connects one to the on-board WiFi/Bluetooth chip. Add the pinmux
arm64: dts: allwinner: a64: Orange Pi Win: Add UARTs The Orange Pi Win exposes several UARTs on header pins, and connects one to the on-board WiFi/Bluetooth chip. Add the pinmux definitions to the UART nodes, but keep them disabled. Enable the UART1, which is wired to the Bluetooth chip, and add a serdev node. There is no binding for the BT8723 yet, so leave this mostly empty for now. Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
show more ...
|