ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards

Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm
Computer Module family carrier boards.

Iris Device Trees:

ARM: dts: imx6ull-colibri: add support for toradex iris carrier boards

Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm
Computer Module family carrier boards.

Iris Device Trees:
- imx6ull-colibri-iris.dtb
- imx6ull-colibri-emmc-iris.dtb
- imx6ull-colibri-wifi-iris.dtb

Iris-V2 Device Trees:
- imx6ull-colibri-iris-v2.dtb
- imx6ull-colibri-emmc-iris-v2.dtb
- imx6ull-colibri-wifi-iris-v2.dtb

Signed-off-by: Denys Drozdov <denys.drozdov@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: Add bosch acc board

Add device tree for the Bosch ACC board, based on i.MX6 Dual.

Signed-off-by: Philip Oberfichtner <pro@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

ARM: dts: imx: Add i.MXRT1050-EVK support

The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MXRT, which features NXP's implementation of the Arm
Cortex-M7 cor

ARM: dts: imx: Add i.MXRT1050-EVK support

The NXP i.MXRT1050 Evaluation Kit (EVK) provides a platform for rapid
evaluation of the i.MXRT, which features NXP's implementation of the Arm
Cortex-M7 core.

The EVK provides 32 MB SDRAM, 64 MB Quad SPI flash, Micro SD card socket,
USB 2.0 OTG.

This patch aims to support the preliminary booting up features
as follows:
GPIO
LPUART
SD/MMC

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
[Jesse: Add clock-parents, edma, usdhc, anatop, remove old pinctl]
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board

Add support for the i.MX7D SMEGW01 board.

This is a gateway board that supports the following peripherals:

- eMMC / SD card
- RTC
- US

ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board

Add support for the i.MX7D SMEGW01 board.

This is a gateway board that supports the following peripherals:

- eMMC / SD card
- RTC
- USB modem
- Wifi via SDIO
- Dual Ethernet
- CAN
- Serial SRAM

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)

Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:

-STM32MP157A-DK1

ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)

Add a "secure" version based on SCMI of STM32 boards. Only boards
provided by STMicroelectronics are concerned:

-STM32MP157A-DK1
-STM32MP157C-DK2
-STM32MP157C-ED1
-STM32MP157C-EV1

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2

Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with

- BCM4708A0
- 128MiB NAND flash
- 2T2R 11ac/a/b/g/n Wi-Fi
- 4x 10/100/1000M et

ARM: dts: BCM5301X: Add DT for WZR-1166DHP,DHP2

Buffalo WZR-1166DHP/WZR-1166DHP2 wireless router with

- BCM4708A0
- 128MiB NAND flash
- 2T2R 11ac/a/b/g/n Wi-Fi
- 4x 10/100/1000M ethernet switch
- 1x USB 3.0 port

WZR-1166DHP and WZR-1166DHP2 have different memory capacity.

WZR-1166DHP
- 512 MiB DDR2 SDRAM

WZR-1166DHP2
- 256 MiB DDR2 SDRAM

These hardware components are very similar to the WZR-1750DHP
except for the number of antennas.

Signed-off-by: SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: dts: stm32: add support for Protonic PRTT1x boards

This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication.

- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor boar

ARM: dts: stm32: add support for Protonic PRTT1x boards

This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication.

- PRTT1C - 10BaseT1L switch
- PRTT1S - 10BaseT1L CO2 sensor board
- PRTT1A - 10BaseT1L multi functional controller

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

ARM: dts: qcom: msm8974-FP2: We're msm8974pro

Fairphone 2 always uses Snapdragon 801, a.k.a msm8974pro so change the
include and filename to that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-

ARM: dts: qcom: msm8974-FP2: We're msm8974pro

Fairphone 2 always uses Snapdragon 801, a.k.a msm8974pro so change the
include and filename to that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220421211936.345168-1-luca@z3ntu.xyz

show more ...

ARM: dts: Add initial LS1021A IoT board dts support

The LS1021A-IoT gateway reference design is a purpose-built,
small footprint hardware platform equipped with a wide array
of both high-speed conne

ARM: dts: Add initial LS1021A IoT board dts support

The LS1021A-IoT gateway reference design is a purpose-built,
small footprint hardware platform equipped with a wide array
of both high-speed connectivity and low speed serial interfaces.

CC: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: add dts files for bcmbca soc 47622

Add dts for ARMv7 based broadband SoC BCM47622. bcm47622.dtsi is the
SoC description dts header and bcm947622.dts is a simple dts file for
Broadcom BCM94

ARM: dts: add dts files for bcmbca soc 47622

Add dts for ARMv7 based broadband SoC BCM47622. bcm47622.dtsi is the
SoC description dts header and bcm947622.dts is a simple dts file for
Broadcom BCM947622 Reference board that only enable the UART port.

Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: dts: qcom-msm8974pro-*: Use the 8974pro name in DT filenames

Add the 'pro' part to the filenames of DTs of devices that are based on
this SoC to make in easier to differentiate between Snapdrag

ARM: dts: qcom-msm8974pro-*: Use the 8974pro name in DT filenames

Add the 'pro' part to the filenames of DTs of devices that are based on
this SoC to make in easier to differentiate between Snapdragon 800- and
801-based platforms.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-16-konrad.dybcio@somainline.org

show more ...

ARM: dts: qcom-*-sony*: Mention SONY board names in DT filenames

SONY phones/tables are based on a common board ('platform'). Devices
based on the same are often close to identical. Mention their as

ARM: dts: qcom-*-sony*: Mention SONY board names in DT filenames

SONY phones/tables are based on a common board ('platform'). Devices
based on the same are often close to identical. Mention their association
in filenames, like it's done in arm64 DTs.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220415115633.575010-2-konrad.dybcio@somainline.org

show more ...

ARM: dts: imx6dl-colibri: Add support for Toradex Aster carrier board

Add support for Toradex Aster, small form-factor with header compatible
with Arduino Uno and Raspberry Pi (RPi) maker boards.

A

ARM: dts: imx6dl-colibri: Add support for Toradex Aster carrier board

Add support for Toradex Aster, small form-factor with header compatible
with Arduino Uno and Raspberry Pi (RPi) maker boards.

Additional detail available at
https://www.toradex.com/products/carrier-boards/aster-carrier-board

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6dl-colibri: Add support for Toradex Iris carrier boards

Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm
Computer Module family Carrier Board.

Additional details a

ARM: dts: imx6dl-colibri: Add support for Toradex Iris carrier boards

Add support for Toradex Iris, small form-factor Pico-ITX Colibri Arm
Computer Module family Carrier Board.

Additional details available at
https://www.toradex.com/products/carrier-board/iris-carrier-board

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6dl-colibri: Drop dedicated v1.1 device tree

Drop Colibri V1.1 device tree, this is just a duplicate of Colibri V1.0
with the possibility to use SD cards in UHS mode if the carrier boar

ARM: dts: imx6dl-colibri: Drop dedicated v1.1 device tree

Drop Colibri V1.1 device tree, this is just a duplicate of Colibri V1.0
with the possibility to use SD cards in UHS mode if the carrier board
does not have 3.3V pull up resistor.

The dedicated device tree kept the feature switched of by setting
the no-1-8-v property and thus does not offer anything different
than what the regular device tree does.

Thus drop the dedicated device tree and merge the preparation to
allow enabling the feature should a carrier without pull ups
be used into the regular device tree.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: qcom: Add support for ASUS ZenWatch 2

Add support for this smartwatch, based on Snapdragon 400 SoC.

Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
*

ARM: dts: qcom: Add support for ASUS ZenWatch 2

Add support for this smartwatch, based on Snapdragon 400 SoC.

Currently supported functionality:
* Internal storage
* USB
* Charger
* Power button
* Vibration motor
* Bluetooth
* Wifi

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220226101939.1011551-2-luca@z3ntu.xyz

show more ...

ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL

Add support for the PHYTEC phyGATE-Tauri-S with i.MX 6ULL with eMMC or
NAND.

Supported features:
* eMMC/NAND

ARM: dts: imx6ull: Add support for PHYTEC phyGATE-Tauri-S with i.MX 6ULL

Add support for the PHYTEC phyGATE-Tauri-S with i.MX 6ULL with eMMC or
NAND.

Supported features:
* eMMC/NAND
* i2c RTC
* i2c TEMP
* PMIC
* PWM
* debug UART
* CAN
* SD card
* 2x 1Gbit Ethernet
* RS232/RS485
* USB 2.0 Host
* TPM
* SPI-NOR

Signed-off-by: Alexander Bauer <a.bauer@phytec.de>
Signed-off-by: Jens Lang <j.lang@phytec.de>
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6ull: add TQ-Systems MBa6ULLxL device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULLxL SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off

ARM: dts: imx6ull: add TQ-Systems MBa6ULLxL device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULLxL SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6ull: add TQ-Systems MBa6ULLx device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULLx SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-b

ARM: dts: imx6ull: add TQ-Systems MBa6ULLx device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULLx SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6ul: add TQ-Systems MBa6ULxL device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULxL SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by

ARM: dts: imx6ul: add TQ-Systems MBa6ULxL device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULxL SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULx SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by:

ARM: dts: imx6ul: add TQ-Systems MBa6ULx device trees

Add device trees for the MBa6ULx mainboard with TQMa6ULx SoMs.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: ux500: Add Codina TMO device tree

This adds a device tree for "Codina TMO" also known as
Samsung Galaxy Exhibit or Samsung SGH-T599. It is quite different
from the vanilla Codina despite s

ARM: dts: ux500: Add Codina TMO device tree

This adds a device tree for "Codina TMO" also known as
Samsung Galaxy Exhibit or Samsung SGH-T599. It is quite different
from the vanilla Codina despite sharing the same board file in
the vendor tree.

Fix up some comments in the Codina DTS while we're at it.

Cc: phone-devel@vger.kernel.org
Cc: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220222233313.1774416-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: Add basic support for Airoha EN7523 SoC

EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon

ARM: Add basic support for Airoha EN7523 SoC

EN7523 is an armv8 based silicon used inside broadband access type devices
such as xPON and xDSL. It shares various silicon blocks with MediaTek
silicon such as the MT7622.

Add basic support for Airoha EN7523, enough for booting to console.

The UART is basically 8250-compatible, except for the clock selection.
A clock-frequency value is synthesized to get this to run at 115200 bps.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Bert Vermeulen <bert@biot.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220130145116.88406-4-nbd@nbd.name
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: dts: mvebu: Add Ctera C-200 V2 board

Ctera C200 V2 is armada-370 based 2-Bay NAS.

Hardware:
- SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
- Ram: 1GB (2x Nanya NT5CC512M

ARM: dts: mvebu: Add Ctera C-200 V2 board

Ctera C200 V2 is armada-370 based 2-Bay NAS.

Hardware:
- SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC)
- Ram: 1GB (2x Nanya NT5CC512M8DN-D1)
- NAND Flash: 256MB (ESMT F59L2G81A-25T)
- Lan: 1x GBE (Marvell 88E1318-NNB2)
- Storage: 2x SATA HDD 3.5" Slot
- USB: 2x USB 3.0 port (Renesas uPD720202)
- Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
- LEDs: 13x GPIO controlled
- Buttons: 2x GPIO controlled

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

ARM: dts: kirkwood: Add Ctera C-200 V1 board

Ctera C200 V1 is kirkwood-based 2-Bay NAS.

Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
-

ARM: dts: kirkwood: Add Ctera C-200 V1 board

Ctera C200 V1 is kirkwood-based 2-Bay NAS.

Hardware:
- SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
- Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
- NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
- Lan: 1x GBE (Marvell 88E1116R-NNC1)
- Storage: 2x SATA HDD 3.5" Slot
- USB: 2x USB 2.0 port
- Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
- LEDs: 13x GPIO controlled
- Buttons: 2x GPIO controlled

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...