#
e06f1a9e |
| 31-Oct-2012 |
Josh Cartwright <josh.cartwright@ni.com> |
ARM: zynq: dts: split up device tree The purpose of the created zynq-7000.dtsi file is to describe the hardware common to all Zynq 7000-based boards. Also, get rid of the zynq-ep107
ARM: zynq: dts: split up device tree The purpose of the created zynq-7000.dtsi file is to describe the hardware common to all Zynq 7000-based boards. Also, get rid of the zynq-ep107 device tree, since it is not hardware anyone can purchase. Add a zc702 dts file based on the zynq-7000.dtsi. Add it to the dts/Makefile so it is built with the 'dtbs' target. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
show more ...
|
#
e59d969f |
| 11-Nov-2012 |
Linus Walleij <linus.walleij@linaro.org> |
Merge branch 'at91' into devel
|
#
86666adc |
| 06-Nov-2012 |
Thomas Abraham <thomas.abraham@linaro.org> |
ARM: dts: add board dts file for EXYNOS4412 based SMDK board Add a minimal board dts file for Samsung EXYNOS4412 based SMDK board. Signed-off-by: Thomas Abraham <thomas.abraham@lina
ARM: dts: add board dts file for EXYNOS4412 based SMDK board Add a minimal board dts file for Samsung EXYNOS4412 based SMDK board. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
show more ...
|
#
7340dd53 |
| 06-Nov-2012 |
Benoit Cousson <b-cousson@ti.com> |
ARM: dts: Makefile: Add the am335x-evmsk target in dtbs list The EVMSK was not built with the 'make dtbs' command. Add the missing entry in the dts Makefile. Signed-off-by: Beno
ARM: dts: Makefile: Add the am335x-evmsk target in dtbs list The EVMSK was not built with the 'make dtbs' command. Add the missing entry in the dts Makefile. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
show more ...
|
#
94058fc5 |
| 06-Nov-2012 |
Olof Johansson <olof@lixom.net> |
Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards Renesas board changes from Simon Horman: * 'boards' of git://git.kernel.org/pub
Merge branch 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards Renesas board changes from Simon Horman: * 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: Remove G4EVM machine support ARM: shmobile: Remove G3EVM machine support ARM: mach-shmobile: Use DT_MACHINE for mackerel ARM: shmobile: marzen: add HSPI support ARM: shmobile: armadillo800eva: enable restart ARM: shmobile: kzm9g: enable DMAEngine on SHDI0 and SDHI2 ARM: shmobile: kzm9g: enable three-axis digital accelerometer ADXL345 ARM: shmobile: kzm9g: enable magnetometer ak8975. Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
#
414b4153 |
| 31-Oct-2012 |
Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> |
ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board The APF28Dev is a docking board for an APF28 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@ar
ARM: mxs: Add support for the Armadeus Systems APF28Dev docking board The APF28Dev is a docking board for an APF28 SOM Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
show more ...
|
#
7d6ab9b8 |
| 25-Oct-2012 |
Rob Herring <rob.herring@calxeda.com> |
ARM: dts: Add Calxeda ECX-2000 support Separate out common dts pieces from highbank dts and add support for Calxeda ECX-2000 (Midway) SOC. Signed-off-by: Rob Herring <rob.herrin
ARM: dts: Add Calxeda ECX-2000 support Separate out common dts pieces from highbank dts and add support for Calxeda ECX-2000 (Midway) SOC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
0ce53cdc |
| 24-Oct-2012 |
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> |
ARM: mach-shmobile: Use DT_MACHINE for mackerel Use DT_MACHINE_START() on the sh7372 based mackerel board. Also include a tiny DTS file to describe the board and update the Kcon
ARM: mach-shmobile: Use DT_MACHINE for mackerel Use DT_MACHINE_START() on the sh7372 based mackerel board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Simon Horman <horms@verge.net.au>
show more ...
|
#
00cbdce7 |
| 24-Oct-2012 |
Benoit Cousson <b-cousson@ti.com> |
ARM: dts: OMAP: Rename pandaES and var_som for consistency Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off
ARM: dts: OMAP: Rename pandaES and var_som for consistency Rename the files to have names consistent across OMAP boards. Update the Makefile to use the new name. Signed-off-by: Benoit Cousson <b-cousson@ti.com>
show more ...
|
#
5a8095e9 |
| 11-Sep-2012 |
Jon Hunter <jon-hunter@ti.com> |
ARM: dts: Add omap3-beagle.dts Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030
ARM: dts: Add omap3-beagle.dts Add a minimal dts for original OMAP3430/3530 version of the Beagle board. This version of the Beagle board has 256MB of DDR and features the same TWL4030 power management IC (PMIC) as the Beagle board XM. Given that the Beagle and Beagle-XM boards use the same PMIC, move the definition of the VSIM regulator into the TWL4030.dtsi file so that we do not need to duplicate in the Beagle board dts file. This has been boot tested on an OMAP3530 Beagle board and verifing that the SD/MMC interface is working with a SD card. V2 changes - Rebased upon of devel-dt - Corrected copyright date in omap3-beagle.dts file - Added LED support after verifing that Beagle and Beagle XM have the same LED configuration Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
show more ...
|
#
a957fdca |
| 18-Oct-2012 |
Julien Boibessot <julien.boibessot@armadeus.com> |
ARM: mxs: Add support for the Armadeus Systems APF28 module The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY.
ARM: mxs: Add support for the Armadeus Systems APF28 module The APF28 is a small SOM built around an i.MX28 processor with 128MBytes DDR2, 256MBytes NAND Flash and an Ethernet PHY. Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com> Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
show more ...
|
#
17bfcd3a |
| 12-Oct-2012 |
Linus Walleij <linus.walleij@linaro.org> |
ARM: dts: compile Integrator device trees This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ARM: dts: compile Integrator device trees This makes sure that the ARM Integrator device trees get compiled during build. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
Revision tags: v3.6-rc1, v3.5, v3.5-rc7, v3.5-rc6 |
|
#
ec6754a7 |
| 05-Jul-2012 |
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
show more ...
|
#
125c9671 |
| 09-Oct-2012 |
Olof Johansson <olof@lixom.net> |
Merge tag 'omap-for-v3.7-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: This branch contains one counter locking
Merge tag 'omap-for-v3.7-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: This branch contains one counter locking fix and an alignment fix. Other fixes are warning fixes, fixes for return value checks. I've also included removal of some extra semicolons, dropping of some duplicate includes, and an a change for wl12xx enumeration that are not strictly fixes but would be good to get out of the way for -rc1. * tag 'omap-for-v3.7-rc1/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm/omap: Replace board_ref_clock with enum values ARM: OMAP2+: remove duplicated include from board-omap3stalker.c arch/arm/plat-omap/omap-pm-noop.c: Remove unecessary semicolon arch/arm/mach-omap2: Remove unecessary semicolon arch/arm/mach-omap1/devices.c: Remove unecessary semicolon AM35xx: Add missing hwmod entry for the HDQ/1-Wire present in AM3505/3517 CPUs. ARM: OMAP2+: gpmc: annotate exit sections properly ARM: OMAP: fix return value check in realtime_counter_init() ARM: OMAP: hsmmc: fix return value check in omap_hsmmc_init_one() OMAPDSS: fix return value check in create_dss_pdev() ARM: OMAP2+: Add am335x evm and bone targets to common Makefile arm: increase FORCE_MAX_ZONEORDER for TI AM33XX ARM: OMAP: OMAP_DEBUG_LEDS needs to select LEDS_CLASS ARM: OMAP: rx51: Fix a section mismatch warn ARM: OMAP2+: Round of the carve out memory requested to section_size ARM: OMAP: counter: add locking to read_persistent_clock
show more ...
|
#
f0cfa981 |
| 24-Sep-2012 |
Vaibhav Hiremath <hvaibhav@ti.com> |
ARM: OMAP2+: Add am335x evm and bone targets to common Makefile This adds am335x-evm and am335x-bone dtb targets to 'make dtbs', just like other platforms. Signed-off-by: Vaibha
ARM: OMAP2+: Add am335x evm and bone targets to common Makefile This adds am335x-evm and am335x-bone dtb targets to 'make dtbs', just like other platforms. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
show more ...
|
#
68528265 |
| 06-Oct-2012 |
Shawn Guo <shawn.guo@linaro.org> |
ARM: dts: remove redundant imx dtb targets from Makefile We already have CONFIG_ARCH_MXC cover imx5 and imx6 dtb targets. Remove the redundant ones with CONFIG_ARCH_IMX5 and CONFIG_SOC_I
ARM: dts: remove redundant imx dtb targets from Makefile We already have CONFIG_ARCH_MXC cover imx5 and imx6 dtb targets. Remove the redundant ones with CONFIG_ARCH_IMX5 and CONFIG_SOC_IMX6Q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
#
ed304be1 |
| 06-Oct-2012 |
Tony Prisk <linux@prisktech.co.nz> |
dtb: Add arch-vt8500 board files to arch/arm/boot/dts/Makefile Add board files (vt8500-bv07, wm8505-ref and wm8650-mid) to allow 'make dtbs' on arch-vt8500. Signed-off-by: Tony
dtb: Add arch-vt8500 board files to arch/arm/boot/dts/Makefile Add board files (vt8500-bv07, wm8505-ref and wm8650-mid) to allow 'make dtbs' on arch-vt8500. Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
#
5e090ed7 |
| 07-Oct-2012 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marve
Merge tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM soc platform updates from Olof Johansson: "This branch contains updates to OMAP and Marvell platforms (kirkwood, dove, mvebu) that came in after we had done the big multiplatform merges, so they were kept separate from the rest, and not separated into the traditional topics of cleanup/driver/platform features. For OMAP, the updates are: - Runtime PM conversions for the GPMC and RNG IP blocks - Preparation patches for the OMAP common clock framework conversion - clkdev alias additions required by other drivers - Performance Monitoring Unit (PMU) support for OMAP2, 3, and non-4430 OMAP4 - OMAP hwmod code and data improvements - Preparation patches for the IOMMU runtime PM conversion - Preparation patches for OMAP4 full-chip retention support For Kirkwood/Dove/mvebu: - New driver for "address decoder controller" for mvebu, which is a piece of hardware that configures addressable devices and peripherals. First user is the boot rom aperture on armada XP since it is needed for SMP support. - New device tree bindings for peripherals such as gpio-fan, iconnect nand, mv_cesa and the above address decoder controller. - Some defconfig updates, mostly to enable new DT boards and a few drivers. - New drivers using the pincontrol subsystem for dove, kirkwood and mvebu - New clean gpio driver for mvebu" * tag 'soc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (98 commits) ARM: mvebu: fix build breaks from multi-platform conversion ARM: OMAP4460/4470: PMU: Enable PMU for OMAP4460/70 ARM: OMAP2+: PMU: Add runtime PM support ARM: OMAP4430: PMU: prepare to create PMU device via HWMOD ARM: OMAP2+: PMU: Convert OMAP2/3 devices to use HWMOD ARM: OMAP3: hwmod data: Add debugss HWMOD data ARM: OMAP2+: clockdomain/hwmod: add workaround for EMU clockdomain idle problems ARM: OMAP: Add a timer attribute for timers that can interrupt the DSP hwrng: OMAP: remove SoC restrictions from driver registration ARM: OMAP: split OMAP1, OMAP2+ RNG device registration hwrng: OMAP: convert to use runtime PM hwrng: OMAP: store per-device data in per-device variables, not file statics ARM: OMAP2xxx: hwmod/CM: add RNG integration data ARM: OMAP2+: gpmc: minimal driver support ARM: OMAP2+: gpmc: Adapt to HWMOD ARM: OMAP2/3: hwmod data: add gpmc ARM: OMAP4: hwmod data: add mmu hwmod for ipu and dsp ARM: OMAP3: hwmod data: add mmu data for iva and isp ARM: OMAP: iommu: fix including iommu.h without IOMMU_API selected ARM: OMAP4: hwmod data: add missing HWMOD_NO_IDLEST flags to some PRCM IP blocks ...
show more ...
|
#
f1c6872e |
| 06-Oct-2012 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Li
Merge tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...
show more ...
|
#
9cd11c0c |
| 01-Oct-2012 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch.
Merge tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc multiplatform enablement from Olof Johansson: "This is a pretty significant branch. It's the introduction of the first multiplatform support on ARM, and with this (and the later branch) merged, it is now possible to build one kernel that contains support for highbank, vexpress, mvebu, socfpga, and picoxcell. More platforms will be convered over in the next few releases. Two critical last things had to be done for this to be practical and possible: * Today each platform has its own include directory under mach-<mach>/include/mach/*, and traditionally that is where a lot of driver/platform shared definitions have gone, such as platform data structures. They now need to move out to a common location instead, and this branch moves a large number of those out to include/linux/platform_data. * Each platform used to list the device trees to compile for its boards in mach-<mach>/Makefile.boot. Both of the above changes will mean that there are some merge conflicts to come (and some to resolve here). It's a one-time move and once it settles in, we should be good for quite a while. Sorry for the overhead." Fix conflicts as per Olof. * tag 'multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (51 commits) ARM: add v7 multi-platform defconfig ARM: msm: Move core.h contents into common.h ARM: highbank: call highbank_pm_init from .init_machine ARM: dtb: move all dtb targets to common Makefile ARM: spear: move platform_data definitions ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ...
show more ...
|
#
b0144870 |
| 22-Sep-2012 |
Olof Johansson <olof@lixom.net> |
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by:
ARM: kirkwood: move new dtbs to common Makefile This moves a few of the newly introduced dtb targets to the common dts/Makefile instead of the per-platform file. Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
#
85594df2 |
| 20-Sep-2012 |
Olof Johansson <olof@lixom.net> |
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move th
ARM: dtb: move all dtb targets to common Makefile Since the dtb targets have moved to arch/arm/boot/dts/Makefile, sweep the platforms that have had new targets added recently and move them over. While I was at it, I also made the dtb generation more generic, i.e. if the platform is enabled then all dtbs for that platform will be created. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Tony Lindgren <tony@atomide.com> Cc: David Brown <davidb@codeaurora.com> Cc: Barry Song <Baohua.Song@csr.com> Cc: Simon Horman <horms@verge.net.au> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Stephen Warren <swarren@wwwdotorg.org>
show more ...
|
#
5ae8d15f |
| 21-Sep-2012 |
Olof Johansson <olof@lixom.net> |
Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, an
Merge tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux into next/multiplatform Enable initial ARM multi-platform support for highbank, mvebu, socfpga, picoxcell, and vexpress. Multi-platform support is dependent on mach/gpio.h removal and restructuring of DEBUG_LL and dtb build rules included in this branch. This has been built for all defconfigs, and booted on highbank with all 5 platforms enabled. By Rob Herring (18) and Arnd Bergmann (1) via Rob Herring * tag 'multi-platform-for-3.7' of git://sources.calxeda.com/kernel/linux: ARM: vexpress: convert to multi-platform ARM: initial multiplatform support ARM: mvebu: move armada-370-xp.h in mach dir ARM: vexpress: remove dependency on mach/* headers ARM: picoxcell: remove dependency on mach/* headers ARM: move all dtb targets out of Makefile.boot ARM: picoxcell: move debug macros to include/debug ARM: socfpga: move debug macros to include/debug ARM: mvebu: move debug macros to include/debug ARM: vexpress: move debug macros to include/debug ARM: highbank: move debug macros to include/debug ARM: move debug macros to common location ARM: make mach/gpio.h headers optional ARM: orion: move custom gpio functions to orion-gpio.h ARM: shmobile: move custom gpio functions to sh-gpio.h ARM: pxa: use gpio_to_irq for sharppm_sl net: pxaficp_ir: add irq resources usb: pxa27x_udc: remove IRQ_USB define staging: ste_rmi4: remove gpio.h include Conflicts due to addition of bcm2835 and removal of pnx4008 in: arch/arm/Kconfig arch/arm/Makefile Conflicts due to new dtb targets, moved to arch/arm/boot/dts/Makefile in: arch/arm/mach-imx/Makefile.boot arch/arm/mach-mxs/Makefile.boot arch/arm/mach-tegra/Makefile.boot Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
#
360a0cab |
| 06-Sep-2012 |
Rob Herring <rob.herring@calxeda.com> |
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Mak
ARM: move all dtb targets out of Makefile.boot In preparation to support multi-platform kernels, move all the dtb targets out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile which is closer to the sources. DTBs are only built when CONFIG_OF is enabled and now use top level CONFIG_ARCH_xxx instead of chip or board specific config options. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@free-electrons.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Linus Walleij <linus.walleij@linaro.org>
show more ...
|