ARM: dts: qcom: Add SDX65 platform and MTP board support

Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the

ARM: dts: qcom: Add SDX65 platform and MTP board support

Add basic devicetree support for SDX65 platform and MTP board from
Qualcomm. The SDX65 platform features an ARM Cortex A7 CPU which forms
the Application Processor Sub System (APSS) along with standard Qualcomm
peripherals like GCC, TLMM, BLSP, QPIC, and BAM etc... Also, there
exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
etc..

This commit adds basic devicetree support that includes GCC, RPMh clock, INTC
and Debug UART.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1635552125-16407-3-git-send-email-quic_vamslank@quicinc.com

show more ...

ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32

The DragonBoard 410c is a convenient device for testing and debugging.
Since there is support for using ARM32 kernels on MSM8916 now,

ARM: dts: qcom: Build apq8016-sbc/DragonBoard 410c DTB on ARM32

The DragonBoard 410c is a convenient device for testing and debugging.
Since there is support for using ARM32 kernels on MSM8916 now, also
build the DB410c DTB on ARM32 so it can be used for testing. ARM64
is still the main supported architecture for DB410c but it actually
works great on ARM32 as well.

The "apq8016-sbc.dts" is simply included as-is from ARM64 similar
to the approach used for Raspberry Pi (e.g. bcm2711-rpi-4-b.dts).

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213113250.4249-1-stephan@gerhold.net

show more ...

ARM: dts: ixp4xx: Add devicetree for Gateway 7001

This adds a device tree for the Gateway 7001 AP, based on
Intel IXP422.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@ui

ARM: dts: ixp4xx: Add devicetree for Gateway 7001

This adds a device tree for the Gateway 7001 AP, based on
Intel IXP422.

Cc: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: dts: at91: add Microchip EVB-KSZ9477 board

Add KSZ9477 managed switch evaluation kit with SAMA5D36 MPU:
https://www.microchip.com/en-us/development-tool/evb-ksz9477

Signed-off-by: Oleksij Remp

ARM: dts: at91: add Microchip EVB-KSZ9477 board

Add KSZ9477 managed switch evaluation kit with SAMA5D36 MPU:
https://www.microchip.com/en-us/development-tool/evb-ksz9477

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211111081045.711323-1-o.rempel@pengutronix.de

show more ...

ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board

Add devicetrees for the new boards in the Y Soft IOTA family.
These boards are based on Orion but use Quad/QuadPlus SoC
instead of DualLite.

ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board

Add devicetrees for the new boards in the Y Soft IOTA family.
These boards are based on Orion but use Quad/QuadPlus SoC
instead of DualLite.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC

YADRO VEGMAN is x86 based servers family with ASPEED AST2500-based BMC.
Currently there are three models:
* VEGMAN N110
* VEGMAN S220/320
* VEG

ARM: dts: aspeed: add device tree for YADRO VEGMAN BMC

YADRO VEGMAN is x86 based servers family with ASPEED AST2500-based BMC.
Currently there are three models:
* VEGMAN N110
* VEGMAN S220/320
* VEGMAN R120/220

The dts files provides configuration for BMC system.

Signed-off-by: Andrei Kartashev <a.kartashev@yadro.com>
Link: https://lore.kernel.org/r/20211119120057.12118-3-a.kartashev@yadro.com
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A

ARM: dts: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier
board.

Genaral features:
- Ethernet 10/100
- Wifi/BT
- USB Type A/OTG
- Audio Out
- CAN
- 10" LVDS Panel (SN65DSI84 DSI-LVDS bridge on SoM)

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.

10.1" OF is a capacitive touch 10.1" Open Frame panel solutions.

i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with
pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0
10.1" Open Frame board.

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

ARM: dts: Add Goramo MultiLink device tree

This adds a device tree for the Goramo MultiLink IXP425-based
WAN router.

Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: openwrt-devel@lists.openwrt.org
Signe

ARM: dts: Add Goramo MultiLink device tree

This adds a device tree for the Goramo MultiLink IXP425-based
WAN router.

Cc: Krzysztof Hałasa <khalasa@piap.pl>
Cc: openwrt-devel@lists.openwrt.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees

Add device trees for the MBa6x mainboard with TQMa6Q/QP/DL SoMs.

As discussed, all new files are added with GPL-2.0-only license, as they
are to

ARM: dts: imx6qdl: add TQ-Systems MBa6x device trees

Add device trees for the MBa6x mainboard with TQMa6Q/QP/DL SoMs.

As discussed, all new files are added with GPL-2.0-only license, as they
are too tightly intertwined with the SoC DTSIs imx6dl.dtsi and imx6q.dtsi,
which are GPL-2.0.

Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: add JOZ Access Point

JOZ Access Point is imx6ull based device designed for agricultural
cleaning machines.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo

ARM: dts: add JOZ Access Point

JOZ Access Point is imx6ull based device designed for agricultural
cleaning machines.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

arm: dts: mt6589: Add device tree for Fairphone 1

Add rudimentary support for the Fairphone 1, based on MT6589 to boot to
UART console.

The recently added SMP support needs to be disabled for this

arm: dts: mt6589: Add device tree for Fairphone 1

Add rudimentary support for the Fairphone 1, based on MT6589 to boot to
UART console.

The recently added SMP support needs to be disabled for this board as
the kernel panics executing /init with it, even though the CPUs seem to
start up fine - maybe a stability issue.

[ 0.072010] smp: Bringing up secondary CPUs ...
[ 0.131888] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.191889] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.251890] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.251982] smp: Brought up 1 node, 4 CPUs
[ 0.254745] SMP: Total of 4 processors activated (7982.28 BogoMIPS).
[ 0.255582] CPU: All CPU(s) started in SVC mode.

[ 0.472039] Run /init as init process
[ 0.473317] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211024084535.30959-1-luca@z3ntu.xyz
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

show more ...

ARM: dts: qcom: apq8026-lg-lenok: rename board vendor

In order to avoid having prefixes for multiple internal divisions of LG
use the "lg" prefix instead of "lge".

Fixes: ad3f04b7bef6 ("ARM: dts: q

ARM: dts: qcom: apq8026-lg-lenok: rename board vendor

In order to avoid having prefixes for multiple internal divisions of LG
use the "lg" prefix instead of "lge".

Fixes: ad3f04b7bef6 ("ARM: dts: qcom: Add support for LG G Watch R")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210928203815.77175-2-luca@z3ntu.xyz

show more ...

ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64

After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree fr

ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64

After adding all necessary support for MSM8916 SMP/cpuidle without PSCI
on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64
tree together with the ARM32 include to allow booting this device on ARM32.

The approach to include device tree files from other architectures is
inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is
used to build the device tree for both ARM32 and ARM64.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211004204955.21077-15-stephan@gerhold.net

show more ...

dts: socfpga: Add Mercury+ AA1 devicetree

Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Signed-off-by: Joanna Brozek <jbrozek@antmic

dts: socfpga: Add Mercury+ AA1 devicetree

Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
Signed-off-by: Joanna Brozek <jbrozek@antmicro.com>
Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Signed-off-by: Maciej Mikunda <mmikunda@antmicro.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20211021151736.2096926-2-pan@semihalf.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: stm32: add initial support of stm32mp135f-dk board

Add support of stm32mp135f discovery board (part number: STM32MP135F-DK).
It embeds a STM32MP135F SOC with 512 MB of DDR3.
Several connec

ARM: dts: stm32: add initial support of stm32mp135f-dk board

Add support of stm32mp135f discovery board (part number: STM32MP135F-DK).
It embeds a STM32MP135F SOC with 512 MB of DDR3.
Several connections are available on this board:
4*USB2.0, 1*USB2.0 typeC DRD, SDcard, 2*RJ45, HDMI, Combo Wifi/BT, ...

Only SD card, uart4 (console) and watchdog IPs are enabled in this commit.

Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>

show more ...

ARM: dts: mvebu: add device tree for netgear gs110emx switch

Add the device tree for a Netgear GS110EMX switch featuring 8 Gigabit
ports and 2 Multi-Gig ports (100M/1G/2.5G/5G/10G). An 88E6390X swit

ARM: dts: mvebu: add device tree for netgear gs110emx switch

Add the device tree for a Netgear GS110EMX switch featuring 8 Gigabit
ports and 2 Multi-Gig ports (100M/1G/2.5G/5G/10G). An 88E6390X switch
sits at its core connecting to two 88X3310P 10G PHYs. The control plane
is handled by an 88F6811 Armada 381 SoC.

The following functionality is tested:
- 8 gigabit Ethernet ports connecting via 88E6390X to the 88F6811
- serial console UART
- 128 MB commercial grade DDR3L SDRAM
- 16 MB serial SPI NOR flash

The two 88X3310P 10G PHYs while detected during boot seem neither to
detect any link nor pass any traffic.

Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

show more ...

ARM: dts: Add Raspberry Pi Compute Module 4 IO Board

This adds the matching carrier for Raspberry Pi Compute Module 4.
Instead of xHCI USB host controller there is just a USB 2.0 interface
connected

ARM: dts: Add Raspberry Pi Compute Module 4 IO Board

This adds the matching carrier for Raspberry Pi Compute Module 4.
Instead of xHCI USB host controller there is just a USB 2.0 interface
connected to the DWC2 controller from the BCM2711. As a result
there is a free PCIe Gen 2 socket. Also there are 2 full-size HDMI 2.0
connectors.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1628334401-6577-10-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>

show more ...

ARM: dts: imx: add devicetree for Tolino Vision 5

This adds a devicetree for the Tolino Vision 5 Ebook reader. It is
based on boards called ¨e70k02¨. It is equipped with an imx6sl SoC.

Signed-off-b

ARM: dts: imx: add devicetree for Tolino Vision 5

This adds a devicetree for the Tolino Vision 5 Ebook reader. It is
based on boards called ¨e70k02¨. It is equipped with an imx6sl SoC.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: imx: add devicetree for Kobo Libra H2O

This adds a devicetree for the Kobo Libra H2O Ebook reader. It is based on
boards called e70k02. It is equipped with an imx6sll SoC.

Signed-off-by:

ARM: dts: imx: add devicetree for Kobo Libra H2O

This adds a devicetree for the Kobo Libra H2O Ebook reader. It is based on
boards called e70k02. It is equipped with an imx6sll SoC.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: dts: colibri-imx6ull-emmc: add device tree

Add a device tree for a Colibri iMX6ULL 1GB which has a eMMC instead of
the raw NAND used on other SKUs.

Signed-off-by: Max Krummenacher <max.krummen

ARM: dts: colibri-imx6ull-emmc: add device tree

Add a device tree for a Colibri iMX6ULL 1GB which has a eMMC instead of
the raw NAND used on other SKUs.

Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: gemini: add device tree for ssi1328

The SSI 1328 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

ARM: gemini: add device tree for edimax NS2502

The edimax NS2502 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@l

ARM: gemini: add device tree for edimax NS2502

The edimax NS2502 is a NAS box running a SL3516 SoC.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: dts: BCM5301X: Add DT for Asus RT-AC88U

Hardware Info
-------------

Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
Switch - BCM53012 in BCM4709C0KFEBG & external RTL8365MB
DDR3 RAM -

ARM: dts: BCM5301X: Add DT for Asus RT-AC88U

Hardware Info
-------------

Processor - Broadcom BCM4709C0KFEBG dual-core @ 1.4 GHz
Switch - BCM53012 in BCM4709C0KFEBG & external RTL8365MB
DDR3 RAM - 512 MB
Flash - 128 MB (ESMT F59L1G81LA-25T)
2.4GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
5GHz - BCM4366 4×4 2.4/5G single chip 802.11ac SoC
Ports - 8 Ports, 1 WAN Ports

Tested on OpenWrt on kernel 5.10 built with DSA driver.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: dts: at91: add Exegin Q5xR5 board

Add Exegin Q5xR5. The base device tree is from OpenWrt tree and with
the addition of this patch there will be no need to maintain it
separatelly in OpenWrt.

[

ARM: dts: at91: add Exegin Q5xR5 board

Add Exegin Q5xR5. The base device tree is from OpenWrt tree and with
the addition of this patch there will be no need to maintain it
separatelly in OpenWrt.

[osk: original author of patch in OpenWrt]
[claudiu.beznea: use "&<label> {" syntax, sorted nodes in alphabetical
order, adapted flash to new support in kernel 5.14, use proper
compatibles according to kernel 5.14, use macros instead of
hardcoded numbers for pinctrl phandles and for all pinctrl references,
add pinctrl-names, pinctrl-X where necessaray]

Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210816064416.1630674-8-claudiu.beznea@microchip.com

show more ...

ARM: dts: at91: add CalAmp LMU5000 board

Add CalAmp LMU5000 board. The base device tree is from OpenWrt tree and
with the addition of this patch there will be no need to maintain it
separatelly in O

ARM: dts: at91: add CalAmp LMU5000 board

Add CalAmp LMU5000 board. The base device tree is from OpenWrt tree and
with the addition of this patch there will be no need to maintain it
separatelly in OpenWrt.

[porter.adam: original author of patch in OpenWrt]
[claudiu.beznea: fixed compilation warnings, use &<lable> syntax,
sorted nodes in alphabetical order, adapted flash to new support
in kernel 5.14, use proper compatibles according to kernel 5.14,
use macros instead of hard coded numbers for pinctrl phandles and
for all pinctrl references, add pinctrl-names, pinctrl-X where
necessary]

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210816064416.1630674-5-claudiu.beznea@microchip.com

show more ...