ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC

This is a half-width, single-socket Epyc server board with an AST2500
BMC. This device tree is sufficient for basic OpenBMC functionality,
but we'll need

ARM: dts: aspeed: Add ASRock ROMED8HM3 BMC

This is a half-width, single-socket Epyc server board with an AST2500
BMC. This device tree is sufficient for basic OpenBMC functionality,
but we'll need to add a few more devices (as driver support becomes
available) before it's fully usable.

Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220105101719.7093-1-zev@bewilderbeest.net
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: add DT for lan966 SoC and 2-port board pcb8291

This patch adds basic DT for Microchip lan966x SoC and associated board
pcb8291(2-port EVB). Adds peripherals required to allow booting: Inte

ARM: dts: add DT for lan966 SoC and 2-port board pcb8291

This patch adds basic DT for Microchip lan966x SoC and associated board
pcb8291(2-port EVB). Adds peripherals required to allow booting: Interrupt
Controller, Clock, Generic ARMv7 Timers, Synopsys Timer, Flexcoms, GPIOs.
Also adds other peripherals like crypto(AES/SHA), DMA, Watchdog Timer, TRNG
and MCAN0.

Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20220221080858.14233-1-kavyasree.kotagiri@microchip.com

show more ...

ARM: dts: aspeed: Add device tree for Quanta S6Q BMC

The Quanta S6Q is a server platform with AST2600 BMC SoC

Signed-off-by: George Hung <george.hung@quantatw.com>
Reviewed-by: Alan Kuo <Alan_Kuo@q

ARM: dts: aspeed: Add device tree for Quanta S6Q BMC

The Quanta S6Q is a server platform with AST2600 BMC SoC

Signed-off-by: George Hung <george.hung@quantatw.com>
Reviewed-by: Alan Kuo <Alan_Kuo@quantatw.com>
Reviewed-by: P.K. Lee <p.k.lee@quantatw.com>
Link: https://lore.kernel.org/r/20220217031355.46102-1-george.hung@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: am335x-sancloud-bbe-extended-wifi: New devicetree

Add support for the SanCloud BBE Extended WiFi board which shares common
hardware with other BBE varients. Compared to the vanilla BBE, th

ARM: dts: am335x-sancloud-bbe-extended-wifi: New devicetree

Add support for the SanCloud BBE Extended WiFi board which shares common
hardware with other BBE varients. Compared to the vanilla BBE, this
particular model:

* adds a WiFi+Bluetooth module connected via SDIO and UART.

* drops the HDMI encoder, barometer and accelerometer.

Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: dts: ixp4xx: Fix up the Netgear WG302 device tree

The version we can support (because of access to the hardware)
is WG302v1, so rename the file and make the following
modifications:

- We have

ARM: dts: ixp4xx: Fix up the Netgear WG302 device tree

The version we can support (because of access to the hardware)
is WG302v1, so rename the file and make the following
modifications:

- We have 32MB memory not 16MB
- The default console speed is 9600 baud so use this
- The device has no ATA disk nor USB so drop the /dev/sda1
default mount, this needs to mount ramdisk or NFS
- Both serial0 and serial1 cannot be assigned with aliases,
just assign serial0
- The Flash is just 8MB so augment the size
- The Flash FIS index is at eraseblock 0x3f
- The PHY is at MDIO address 30

Tested by bringing the Netgear WG302v1 up to userspace using
initramfs appended to the kernel and downloaded over TFTP,
then ifconfig to bring up eth0 and pinging the host. All
works fine including SSH into the device from the host.

Cc: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

show more ...

ARM: dts: Add Raspberry Pi Zero 2 W

The Raspberry Pi Zero 2 W mostly bases on the Raspberry Pi Zero W with
the following differences:
* Broadcom BCM2710A1, quad-core 64-bit SoC @ 1 GHz
* Synaptics B

ARM: dts: Add Raspberry Pi Zero 2 W

The Raspberry Pi Zero 2 W mostly bases on the Raspberry Pi Zero W with
the following differences:
* Broadcom BCM2710A1, quad-core 64-bit SoC @ 1 GHz
* Synaptics BCM43436 (reported as BCM43430B0) IEEE 802.11b/g/n wireless LAN

Contrary to the Raspberry Pi 3 boards there is no GPIO expander.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

show more ...

ARM: dts: mstar: Add board for 100ask DongShanPiOne

The DongShanPiOne is little SigmaStar SSD202D based module
from 100ask.

Add an initial dts for this board.

Link: http://linux-chenxing.org/infin

ARM: dts: mstar: Add board for 100ask DongShanPiOne

The DongShanPiOne is little SigmaStar SSD202D based module
from 100ask.

Add an initial dts for this board.

Link: http://linux-chenxing.org/infinity2/dongshanpione/
Signed-off-by: Daniel Palmer <daniel@0x0f.com>

show more ...

ARM: dts: mstar: Add a dts for Miyoo Mini

Miyoo has released a portable retro games machine based
on the SigmaStar SSD202D. Add the initial device tree
for this machine. Just enough to get to an ini

ARM: dts: mstar: Add a dts for Miyoo Mini

Miyoo has released a portable retro games machine based
on the SigmaStar SSD202D. Add the initial device tree
for this machine. Just enough to get to an initramfs
shell.

Link: http://linux-chenxing.org/infinity2/miyoomini/
Signed-off-by: Daniel Palmer <daniel@0x0f.com>

show more ...

ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W

The Wireless Tag IDO-SBC2D06-V1B-22W[1] is an SBC powered by SSD202D
with a dual Ethernet and a connector for a 4-inch and 7-inch display.
I

ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W

The Wireless Tag IDO-SBC2D06-V1B-22W[1] is an SBC powered by SSD202D
with a dual Ethernet and a connector for a 4-inch and 7-inch display.
It embeds a System-On-Module IDO-SOM2D01[2] with an Mstar SSD202 SoC
dual-core Cortex-A7 CPU @ 1.2Ghz , 2D GPU, 128 MB DDR3 (on-chip) and
a 256MB SPI NAND flash. This commit adds basic definition for this
board.

1. http://linux-chenxing.org/infinity2/ido-sbc2d06
2. http://www.wireless-tag.com/portfolio/ido-som2d01

Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Palmer <daniel@0x0f.com>

show more ...

ARM: dts: stm32: Add support for the emtrion emSBC-Argon

This patch presents the DT patches for the emtrion GmbH
Argon board series. They are available with STM32MP157
from STMicroelectronics with 5

ARM: dts: stm32: Add support for the emtrion emSBC-Argon

This patch presents the DT patches for the emtrion GmbH
Argon board series. They are available with STM32MP157
from STMicroelectronics with 512 MByte Memory.

The devicetree stm32mp157c-emstamp-argon.dtsi is the common part
providing the module components and the basic support for the SoC.
The support for the emSBC-Argon baseboard in the developer-kit
configuration is provided by the stm32mp157c-emsbc-argon.dts file.

Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

show more ...

ARM: dts: exynos: Add support for Samsung Klimt WiFi

Klimt WiFi has the product name Samsung Galaxy Tab S 8.4". Board is
based on Exynos 5420, and has similar hardware to Chagall WiFi, but
with a s

ARM: dts: exynos: Add support for Samsung Klimt WiFi

Klimt WiFi has the product name Samsung Galaxy Tab S 8.4". Board is
based on Exynos 5420, and has similar hardware to Chagall WiFi, but
with a smaller battery, smaller screen and another touchscreen
controller.

The device tree added here contains support for:

- UART access through a micro-usb cable with 619 kOhm between ID & GND
- Accessing the internal eMMC storage
- Accessing an external SD card
- USB, after configuration it is possible to ssh into the device
through a usb cable

Signed-off-by: Henrik Grimler <henrik@grimler.se>
Link: https://lore.kernel.org/r/20220124131241.29946-3-henrik@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

show more ...

ARM: dts: sun7i: Add A20-Marsboard

The Marsboard A20 is a A20 based SBC with 1G RAM, 8G Flash, micro SD
card slot , SATA socketm 10/100 ethernet, HDMI port, 4 USB2.0 ports, 2
USB2.0 OTG, USB WIFI(RT

ARM: dts: sun7i: Add A20-Marsboard

The Marsboard A20 is a A20 based SBC with 1G RAM, 8G Flash, micro SD
card slot , SATA socketm 10/100 ethernet, HDMI port, 4 USB2.0 ports, 2
USB2.0 OTG, USB WIFI(RTL8188EU) with antenna.

Signed-off-by: Conley Lee <conleylee@foxmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/tencent_C2E26D0935C9157CB3597BA4BD3316E8940A@qq.com

show more ...

ARM: dts: exynos: Add support for Samsung Chagall WiFi

Chagall WiFi, with product name Samsung Galaxy Tab S 10.5", is based
on Exynos 5420. This device is one of several tablet models released
in 2

ARM: dts: exynos: Add support for Samsung Chagall WiFi

Chagall WiFi, with product name Samsung Galaxy Tab S 10.5", is based
on Exynos 5420. This device is one of several tablet models released
in 2014 based on Exynos 5420.

The device tree added here contains support for:

- UART
- eMMC
- SD card
- USB

CCI has been disabled in the hardware, enabling it would require
(de-)soldering a resistor on the board. Trying to boot with it
enabled in kernel makes the device hang when CCI is probed.
Exynos5420-arndale-octa also has had CCI disabled due to issues, see
commit 25217fef3551 ("ARM: dts: disable CCI on exynos5420 based
arndale-octa").

Signed-off-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220118185746.299832-4-henrik@grimler.se
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>

show more ...

ARM: dts: aspeed: Add TYAN S8036 BMC machine

The TYAN S8036 is a server platform with an ASPEED AST2500 BMC.

Signed-off-by: Ali El-Haj-Mahmoud <aaelhaj@google.com>
Reviewed-by: Joel Stanley <joel@j

ARM: dts: aspeed: Add TYAN S8036 BMC machine

The TYAN S8036 is a server platform with an ASPEED AST2500 BMC.

Signed-off-by: Ali El-Haj-Mahmoud <aaelhaj@google.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20211130180110.2217042-1-aaelhaj@google.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: aspeed: Adding Facebook Bletchley BMC

Initial introduction of Facebook Bletchley equipped with
Aspeed 2600 BMC SoC.

Signed-off-by: Howard Chiu <howard.chiu@quantatw.com>
Link: https://lor

ARM: dts: aspeed: Adding Facebook Bletchley BMC

Initial introduction of Facebook Bletchley equipped with
Aspeed 2600 BMC SoC.

Signed-off-by: Howard Chiu <howard.chiu@quantatw.com>
Link: https://lore.kernel.org/r/20211207094923.422422-1-howard.chiu@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>

show more ...

ARM: dts: Fix timer regression for beagleboard revision c

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
cl

ARM: dts: Fix timer regression for beagleboard revision c

Commit e428e250fde6 ("ARM: dts: Configure system timers for omap3")
caused a timer regression for beagleboard revision c where the system
clockevent stops working if omap3isp module is unloaded.

Turns out we still have beagleboard revisions a-b4 capacitor c70 quirks
applied that limit the usable timers for no good reason. This also affects
the power management as we use the system clock instead of the 32k clock
source.

Let's fix the issue by adding a new omap3-beagle-ab4.dts for the old timer
quirks. This allows us to remove the timer quirks for later beagleboard
revisions. We also need to update the related timer quirk check for the
correct compatible property.

Fixes: e428e250fde6 ("ARM: dts: Configure system timers for omap3")
Cc: linux-kernel@vger.kernel.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

show more ...

ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster

Add DTS of BSH SMM-M2 SystemMaster.

This version comes with:
- 128 MiB DDR3 RAM
- 256 MiB Nand
- wifi
- bluetooth

Signed-off-by: A

ARM: dts: imx6ulz-bsh-smm-m2: Add BSH SMM-M2 IMX6ULZ SystemMaster

Add DTS of BSH SMM-M2 SystemMaster.

This version comes with:
- 128 MiB DDR3 RAM
- 256 MiB Nand
- wifi
- bluetooth

Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

show more ...

ARM: tegra: Add device-tree for 1080p version of Nyan Big

Add dedicated device-tree for 1080p version of Nyan Big in order to
describe display panel properly. FHD panel doesn't support modes other
t

ARM: tegra: Add device-tree for 1080p version of Nyan Big

Add dedicated device-tree for 1080p version of Nyan Big in order to
describe display panel properly. FHD panel doesn't support modes other
than 1080p, hence it's wrong to use incompatible lower resolution panel
in device-tree.

Tested-by: Thomas Graichen <thomas.graichen@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: tegra: Add device-tree for Pegatron Chagall

Add device-tree for Pegatron Chagall, which is a NVIDIA Tegra30-based
Android tablet.

Link: https://wiki.postmarketos.org/wiki/Pegatron_Chagall_(peg

ARM: tegra: Add device-tree for Pegatron Chagall

Add device-tree for Pegatron Chagall, which is a NVIDIA Tegra30-based
Android tablet.

Link: https://wiki.postmarketos.org/wiki/Pegatron_Chagall_(pegatron-chagall)
Co-developed-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T

Add device-tree for Tegra114-based ASUS Transformer Pad TF701T (K00C)
tablet.

Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_P

ARM: tegra: Add device-tree for ASUS Transformer Pad TF701T

Add device-tree for Tegra114-based ASUS Transformer Pad TF701T (K00C)
tablet.

Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(TF701T)_(asus-tf701t)
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T

Add device-tree for ASUS Transformer Infinity TF700T, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android.

ARM: tegra: Add device-tree for ASUS Transformer Infinity TF700T

Add device-tree for ASUS Transformer Infinity TF700T, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android.

Link: https://wiki.postmarketos.org/wiki/Asus_Transformer_Pad_Infinity_TF700T_(asus-tf700t)
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Co-developed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG

Add device-tree for ASUS Transformer Pad TF300TG, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android. It's a
v

ARM: tegra: Add device-tree for ASUS Transformer Pad TF300TG

Add device-tree for ASUS Transformer Pad TF300TG, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android. It's a
variant of the TF300T that has a 3G modem.

Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t)
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T

Add device-tree for ASUS Transformer Pad TF300T, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android.

Link: htt

ARM: tegra: Add device-tree for ASUS Transformer Pad TF300T

Add device-tree for ASUS Transformer Pad TF300T, which is a NVIDIA
Tegra30-based 2-in-1 detachable, originally running Android.

Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Pad_(asus-tf300t)
Tested-by: Ihor Didenko <tailormoon@rambler.ru>
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: tegra: Add device-tree for ASUS Transformer Prime TF201

Add device-tree for ASUS Transformer Prime TF201, which is a NVIDIA
Tegra30-based 2-in-1 detachable, orignally running Android.

Link: ht

ARM: tegra: Add device-tree for ASUS Transformer Prime TF201

Add device-tree for ASUS Transformer Prime TF201, which is a NVIDIA
Tegra30-based 2-in-1 detachable, orignally running Android.

Link: https://wiki.postmarketos.org/wiki/ASUS_Transformer_Prime_(asus-tf201)
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Co-developed-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...

ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.

Link: https://wiki.postmarketos.org/wiki/ASUS_Eee_Pad_Transformer_(asu

ARM: tegra: Add device-tree for ASUS Transformer EeePad TF101

Add device-tree for Tegra20-based ASUS Transformer EeePad TF101.

Link: https://wiki.postmarketos.org/wiki/ASUS_Eee_Pad_Transformer_(asus-tf101)
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Co-developed-by: Antoni Aloy Torrens <aaloytorrens@gmail.com>
Signed-off-by: Antoni Aloy Torrens <aaloytorrens@gmail.com>
Signed-off-by: Nikola Milosavljevic <mnidza@outlook.com>
Co-developed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[treding@nvidia.com: cosmetic fixups]
Signed-off-by: Thierry Reding <treding@nvidia.com>

show more ...