wifi: cfg80211/nl80211: Add support to indicate STA MLD setup links removal

STA MLD setup links may get removed if AP MLD remove the corresponding
affiliated APs with Multi-Link reconfiguration as d

wifi: cfg80211/nl80211: Add support to indicate STA MLD setup links removal

STA MLD setup links may get removed if AP MLD remove the corresponding
affiliated APs with Multi-Link reconfiguration as described in
P802.11be_D3.0, section 35.3.6.2.2 Removing affiliated APs. Currently,
there is no support to notify such operation to cfg80211 and userspace.

Add support for the drivers to indicate STA MLD setup links removal to
cfg80211 and notify the same to userspace. Upon receiving such
indication from the driver, clear the MLO links information of the
removed links in the WDEV.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230317142153.237900-1-quic_vjakkam@quicinc.com
[rename function and attribute, fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: add inform_bss op to update BSS

This new function is called from within the inform_bss(_frame)_data
functions in order for the driver to update data that it is tracking.

Signed-off-

wifi: cfg80211: add inform_bss op to update BSS

This new function is called from within the inform_bss(_frame)_data
functions in order for the driver to update data that it is tracking.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094949.8d7781b0f965.I80041183072b75c081996a1a5a230b34aff5c668@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: make TDLS management link-aware

For multi-link operation(MLO) TDLS management
frames need to be transmitted on a specific link.
The TDLS setup request will add BSSID along with
peer

wifi: cfg80211: make TDLS management link-aware

For multi-link operation(MLO) TDLS management
frames need to be transmitted on a specific link.
The TDLS setup request will add BSSID along with
peer address and userspace will pass the link-id
based on BSSID value to the driver(or mac80211).

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230616094948.cb3d87c22812.Ia3d15ac4a9a182145bf2d418bcb3ddf4539cd0a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: replace strlcpy() with strscpy()

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read

wifi: cfg80211: replace strlcpy() with strscpy()

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().

Direct replacement is safe here since WIPHY_ASSIGN is only used by
TRACE macros and the return values are ignored.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89

Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230612232301.2572316-1-azeemshaikh38@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211/mac80211: report link ID on control port RX

For control port RX, report the link ID for MLO.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <g

wifi: cfg80211/mac80211: report link ID on control port RX

For control port RX, report the link ID for MLO.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.fe06dfc3791b.Iddcab94789cafe336417be406072ce8a6312fc2d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: nl80211: add a command to enable/disable HW timestamping

Add a command to enable and disable HW timestamping of TM and FTM
frames. HW timestamping can be enabled for a specific mac address
or

wifi: nl80211: add a command to enable/disable HW timestamping

Add a command to enable and disable HW timestamping of TM and FTM
frames. HW timestamping can be enabled for a specific mac address
or for all addresses.

The low level driver will indicate how many peers HW timestamping
can be enabled concurrently, and this information will be passed
to userspace.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.05678d7b1c17.Iccc08869ea8156f1c71a3111a47f86dd56234bd0@changeid
[switch to needing netdev UP, minor edits]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: include puncturing bitmap in channel switch events

Add puncturing bitmap in channel switch notifications
and corresponding trace functions.

Signed-off-by: Aloka Dixit <quic_alokad@q

wifi: cfg80211: include puncturing bitmap in channel switch events

Add puncturing bitmap in channel switch notifications
and corresponding trace functions.

Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20230131001227.25014-4-quic_alokad@quicinc.com
[fix qtnfmac]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD AP

Add support to offload OWE processing to user space for MLD AP when
driver's SME in use.

Add new parameters in struct cfg80211_upd

wifi: cfg80211: Extend cfg80211_update_owe_info_event() for MLD AP

Add support to offload OWE processing to user space for MLD AP when
driver's SME in use.

Add new parameters in struct cfg80211_update_owe_info to provide below
information in cfg80211_update_owe_info_event() call:
- MLO link ID of the AP, with which station requested (re)association.
This is applicable for both MLO and non-MLO station connections when
the AP affiliated with an MLD.
- Station's MLD address if the connection is MLO capable.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com
[reformat the trace event macro]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: Authentication offload to user space for MLO connection in STA mode

Currently authentication request event interface doesn't have support to
indicate the user space whether it should

wifi: cfg80211: Authentication offload to user space for MLO connection in STA mode

Currently authentication request event interface doesn't have support to
indicate the user space whether it should enable MLO or not during the
authentication with the specified AP. But driver needs such capability
since the connection is MLO or not decided by the driver in case of SME
offload to the driver.

Add support for driver to indicate MLD address of the AP in
authentication offload request to inform user space to enable MLO during
authentication process. Driver shall look at NL80211_ATTR_MLO_SUPPORT
flag capability in NL80211_CMD_CONNECT to know whether the user space
supports enabling MLO during the authentication offload.

User space should enable MLO during the authentication only when it
receives the AP MLD address in authentication offload request. User
space shouldn't enable MLO if the authentication offload request doesn't
indicate the AP MLD address even if the AP is MLO capable.

When MLO is enabled, user space should use the MAC address of the
interface (on which driver sent request) as self MLD address. User space
and driver to use MLD addresses in RA, TA and BSSID fields of the frames
between them, and driver translates the MLD addresses to/from link
addresses based on the link chosen for the authentication.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230116125058.1604843-1-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: trace: remove MAC_PR_{FMT,ARG}

With %pM, this really is no longer needed, and actually
longer to spell out. Remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: Add link_id to cfg80211_ch_switch_started_notify()

Add link_id parameter to cfg80211_ch_switch_started_notify() to allow
driver to indicate on which link channel switch started on ML

wifi: cfg80211: Add link_id to cfg80211_ch_switch_started_notify()

Add link_id parameter to cfg80211_ch_switch_started_notify() to allow
driver to indicate on which link channel switch started on MLD.

Send the data to userspace so it knows as well.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220722131143.3438042-1-quic_vjakkam@quicinc.com
Link: https://lore.kernel.org/r/20220722131143.3438042-2-quic_vjakkam@quicinc.com
[squash two patches]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: Add link_id parameter to various key operations for MLO

Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to dri

wifi: cfg80211: Add link_id parameter to various key operations for MLO

Add support for various key operations on MLD by adding new parameter
link_id. Pass the link_id received from userspace to driver for add_key,
get_key, del_key, set_default_key, set_default_mgmt_key and
set_default_beacon_key to support configuring keys specific to each MLO
link. Userspace must not specify link ID for MLO pairwise key since it
is common for all the MLO links.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211/nl80211: move rx management data into a struct

The functions for reporting rx management take many arguments.
Collect all the arguments into a struct, which also make it easier
to add

wifi: cfg80211/nl80211: move rx management data into a struct

The functions for reporting rx management take many arguments.
Collect all the arguments into a struct, which also make it easier
to add more arguments if needed.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211/mac80211: Support control port TX from specific link

In case of authentication with a legacy station, link addressed EAPOL
frames should be sent. Support it.

Signed-off-by: Andrei Ot

wifi: cfg80211/mac80211: Support control port TX from specific link

In case of authentication with a legacy station, link addressed EAPOL
frames should be sent. Support it.

Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: extend cfg80211_rx_assoc_resp() for MLO

Extend the cfg80211_rx_assoc_resp() to cover multiple
BSSes, the AP MLD address and local link addresses
for MLO.

Signed-off-by: Johannes Ber

wifi: cfg80211: extend cfg80211_rx_assoc_resp() for MLO

Extend the cfg80211_rx_assoc_resp() to cover multiple
BSSes, the AP MLD address and local link addresses
for MLO.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: adjust assoc comeback for MLO

We only report the BSSID to userspace, so change the
argument from BSS struct pointer to AP address, which
we'll use to carry either the BSSID or AP MLD

wifi: cfg80211: adjust assoc comeback for MLO

We only report the BSSID to userspace, so change the
argument from BSS struct pointer to AP address, which
we'll use to carry either the BSSID or AP MLD address.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: prepare association failure APIs for MLO

For MLO, we need the ability to report back multiple BSS
structures to release, as well as the AP MLD address (if
attempting to make an MLO c

wifi: cfg80211: prepare association failure APIs for MLO

For MLO, we need the ability to report back multiple BSS
structures to release, as well as the AP MLD address (if
attempting to make an MLO connection).

Unify cfg80211_assoc_timeout() and cfg80211_abandon_assoc()
into a new cfg80211_assoc_failure() that gets a structure
parameter with the necessary data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: remove BSS pointer from cfg80211_disassoc_request

The race described by the comment in mac80211 hasn't existed
since the locking rework to use the same lock and for MLO we
need to pa

wifi: cfg80211: remove BSS pointer from cfg80211_disassoc_request

The race described by the comment in mac80211 hasn't existed
since the locking rework to use the same lock and for MLO we
need to pass the AP MLD address, so just pass the BSSID or
AP MLD address instead of the BSS struct pointer, and adjust
all the code accordingly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: drop BSS elements from assoc trace for now

For multi-link operation, this cannot work as the req->bss pointer
will be NULL, and we'll need to do more work on this to really add
traci

wifi: cfg80211: drop BSS elements from assoc trace for now

For multi-link operation, this cannot work as the req->bss pointer
will be NULL, and we'll need to do more work on this to really add
tracing for the MLO case here. Drop the BSS elements for now as
they're not the most useful thing, and it's hard to size things
correctly for the MLO case (without adding a lot of code that's
also executed when tracing isn't enabled.)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211/mac80211: separate link params from station params

Put the link_station_parameters structure in the station_parameters
structure (and remove the station_parameters fields already exis

wifi: cfg80211/mac80211: separate link params from station params

Put the link_station_parameters structure in the station_parameters
structure (and remove the station_parameters fields already existing
in link_station_parameters).
Now, for an MLD station, the default link is added together with
the station.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: add API to add/modify/remove a link station

Add an API for adding/modifying/removing a link of a station.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Joh

wifi: cfg80211: add API to add/modify/remove a link station

Add an API for adding/modifying/removing a link of a station.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: add optional link add/remove callbacks

Add some optional callbacks for link add/remove so that
drivers can react here. Initially, I thought it would be
sufficient to just create the

wifi: cfg80211: add optional link add/remove callbacks

Add some optional callbacks for link add/remove so that
drivers can react here. Initially, I thought it would be
sufficient to just create the link in start_ap etc., but
it turns out that's not so simple, since there are quite
a few callbacks that can be called: if they're erroneously
without start_ap, things might crash.

Thus it might be easier for drivers to allocate all the
necessary data structures immediately, to not have to
worry about it in each callback, since cfg80211 checks
that the link ID is valid (has been added.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

wifi: cfg80211: sort trace.h

We wanted to have this sorted by direction (to/from driver),
but didn't maintain that well. Sort the file now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

wifi: cfg80211: do some rework towards MLO link APIs

In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new n

wifi: cfg80211: do some rework towards MLO link APIs

In order to support multi-link operation with multiple links,
start adding some APIs. The notable addition here is to have
the link ID in a new nl80211 attribute, that will be used to
differentiate the links in many nl80211 operations.

So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID
attribute (as well as the NL80211_ATTR_MLO_LINKS attribute)
and plugs it through the system in some places, checking the
validity etc. along with other infrastructure needed for it.

For now, I've decided to include only the over-the-air link
ID in the API. I know we discussed that we eventually need to
have to have other ways of identifying a link, but for local
AP mode and auth/assoc commands as well as set_key etc. we'll
use the OTA ID.

Also included in this patch is some refactoring of the data
structures in struct wireless_dev, splitting for the first
time the data into type dependent pieces, to make reasoning
about these things easier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard

ETSI standard defines "Offchannel CAC" as:
"Off-Channel CAC is performed by a number of non-contin

cfg80211: rename offchannel_chain structs to background_chain to avoid confusion with ETSI standard

ETSI standard defines "Offchannel CAC" as:
"Off-Channel CAC is performed by a number of non-continuous checks
spread over a period in time. This period, which is required to
determine the presence of radar signals, is defined as the Off-Channel
CAC Time..
Minimum Off-Channel CAC Time 6 minutes and Maximum Off-Channel CAC Time
4 hours..".
mac80211 implementation refers to a dedicated hw chain used for continuous
radar monitoring. Rename offchannel_* references to background_* in
order to avoid confusion with ETSI standard.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4204cc1d648d76b44557981713231e030a3bd991.1638190762.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...