Revision tags: v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1 |
|
#
1fc07f3e |
| 11-Jul-2016 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: reset all unicast links when broadcast send link fails In test situations with many nodes and a heavily stressed system we have observed that the transmission broadcast link may fa
tipc: reset all unicast links when broadcast send link fails In test situations with many nodes and a heavily stressed system we have observed that the transmission broadcast link may fail due to an excessive number of retransmissions of the same packet. In such situations we need to reset all unicast links to all peers, in order to reset and re-synchronize the broadcast link. In this commit, we add a new function tipc_bearer_reset_all() to be used in such situations. The function scans across all bearers and resets all their pertaining links. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
ee58b571 |
| 30-Jun-2016 |
David S. Miller <davem@davemloft.net> |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list pa
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Several cases of overlapping changes, except the packet scheduler conflicts which deal with the addition of the free list parameter to qdisc_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.4.15, v4.6.4, v4.6.3, v4.4.14 |
|
#
66d95b67 |
| 15-Jun-2016 |
Ying Xue <ying.xue@windriver.com> |
tipc: fix suspicious RCU usage When run tipcTS&tipcTC test suite, the following complaint appears: [ 56.926168] =============================== [ 56.926169] [ INFO: suspicio
tipc: fix suspicious RCU usage When run tipcTS&tipcTC test suite, the following complaint appears: [ 56.926168] =============================== [ 56.926169] [ INFO: suspicious RCU usage. ] [ 56.926171] 4.7.0-rc1+ #160 Not tainted [ 56.926173] ------------------------------- [ 56.926174] net/tipc/bearer.c:408 suspicious rcu_dereference_protected() usage! [ 56.926175] [ 56.926175] other info that might help us debug this: [ 56.926175] [ 56.926177] [ 56.926177] rcu_scheduler_active = 1, debug_locks = 1 [ 56.926179] 3 locks held by swapper/4/0: [ 56.926180] #0: (((&req->timer))){+.-...}, at: [<ffffffff810e79b5>] call_timer_fn+0x5/0x340 [ 56.926203] #1: (&(&req->lock)->rlock){+.-...}, at: [<ffffffffa000c29b>] disc_timeout+0x1b/0xd0 [tipc] [ 56.926212] #2: (rcu_read_lock){......}, at: [<ffffffffa00055e0>] tipc_bearer_xmit_skb+0xb0/0x2e0 [tipc] [ 56.926218] [ 56.926218] stack backtrace: [ 56.926221] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 4.7.0-rc1+ #160 [ 56.926222] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 56.926224] 0000000000000000 ffff880016803d28 ffffffff813c4423 ffff8800154252c0 [ 56.926227] 0000000000000001 ffff880016803d58 ffffffff810b7512 ffff8800124d8120 [ 56.926230] ffff880013f8a160 ffff8800132b5ccc ffff8800124d8120 ffff880016803d88 [ 56.926234] Call Trace: [ 56.926235] <IRQ> [<ffffffff813c4423>] dump_stack+0x67/0x94 [ 56.926250] [<ffffffff810b7512>] lockdep_rcu_suspicious+0xe2/0x120 [ 56.926256] [<ffffffffa00051f1>] tipc_l2_send_msg+0x131/0x1c0 [tipc] [ 56.926261] [<ffffffffa000567c>] tipc_bearer_xmit_skb+0x14c/0x2e0 [tipc] [ 56.926266] [<ffffffffa00055e0>] ? tipc_bearer_xmit_skb+0xb0/0x2e0 [tipc] [ 56.926273] [<ffffffffa000c280>] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc] [ 56.926278] [<ffffffffa000c280>] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc] [ 56.926283] [<ffffffffa000c2d6>] disc_timeout+0x56/0xd0 [tipc] [ 56.926288] [<ffffffff810e7a68>] call_timer_fn+0xb8/0x340 [ 56.926291] [<ffffffff810e79b5>] ? call_timer_fn+0x5/0x340 [ 56.926296] [<ffffffffa000c280>] ? tipc_disc_init_msg+0x1f0/0x1f0 [tipc] [ 56.926300] [<ffffffff810e8f4a>] run_timer_softirq+0x23a/0x390 [ 56.926306] [<ffffffff810f89ff>] ? clockevents_program_event+0x7f/0x130 [ 56.926316] [<ffffffff819727c3>] __do_softirq+0xc3/0x4a2 [ 56.926323] [<ffffffff8106ba5a>] irq_exit+0x8a/0xb0 [ 56.926327] [<ffffffff81972456>] smp_apic_timer_interrupt+0x46/0x60 [ 56.926331] [<ffffffff81970a49>] apic_timer_interrupt+0x89/0x90 [ 56.926333] <EOI> [<ffffffff81027fda>] ? default_idle+0x2a/0x1a0 [ 56.926340] [<ffffffff81027fd8>] ? default_idle+0x28/0x1a0 [ 56.926342] [<ffffffff810289cf>] arch_cpu_idle+0xf/0x20 [ 56.926345] [<ffffffff810adf0f>] default_idle_call+0x2f/0x50 [ 56.926347] [<ffffffff810ae145>] cpu_startup_entry+0x215/0x3e0 [ 56.926353] [<ffffffff81040ad9>] start_secondary+0xf9/0x100 The warning appears as rtnl_dereference() is wrongly used in tipc_l2_send_msg() under RCU read lock protection. Instead the proper usage should be that rcu_dereference_rtnl() is called here. Fixes: 5b7066c3dd24 ("tipc: stricter filtering of packets in bearer layer") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
35c55c98 |
| 13-Jun-2016 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: add neighbor monitoring framework TIPC based clusters are by default set up with full-mesh link connectivity between all nodes. Those links are expected to provide a short fail
tipc: add neighbor monitoring framework TIPC based clusters are by default set up with full-mesh link connectivity between all nodes. Those links are expected to provide a short failure detection time, by default set to 1500 ms. Because of this, the background load for neighbor monitoring in an N-node cluster increases with a factor N on each node, while the overall monitoring traffic through the network infrastructure increases at a ~(N * (N - 1)) rate. Experience has shown that such clusters don't scale well beyond ~100 nodes unless we significantly increase failure discovery tolerance. This commit introduces a framework and an algorithm that drastically reduces this background load, while basically maintaining the original failure detection times across the whole cluster. Using this algorithm, background load will now grow at a rate of ~(2 * sqrt(N)) per node, and at ~(2 * N * sqrt(N)) in traffic overhead. As an example, each node will now have to actively monitor 38 neighbors in a 400-node cluster, instead of as before 399. This "Overlapping Ring Supervision Algorithm" is completely distributed and employs no centralized or coordinated state. It goes as follows: - Each node makes up a linearly ascending, circular list of all its N known neighbors, based on their TIPC node identity. This algorithm must be the same on all nodes. - The node then selects the next M = sqrt(N) - 1 nodes downstream from itself in the list, and chooses to actively monitor those. This is called its "local monitoring domain". - It creates a domain record describing the monitoring domain, and piggy-backs this in the data area of all neighbor monitoring messages (LINK_PROTOCOL/STATE) leaving that node. This means that all nodes in the cluster eventually (default within 400 ms) will learn about its monitoring domain. - Whenever a node discovers a change in its local domain, e.g., a node has been added or has gone down, it creates and sends out a new version of its node record to inform all neighbors about the change. - A node receiving a domain record from anybody outside its local domain matches this against its own list (which may not look the same), and chooses to not actively monitor those members of the received domain record that are also present in its own list. Instead, it relies on indications from the direct monitoring nodes if an indirectly monitored node has gone up or down. If a node is indicated lost, the receiving node temporarily activates its own direct monitoring towards that node in order to confirm, or not, that it is actually gone. - Since each node is actively monitoring sqrt(N) downstream neighbors, each node is also actively monitored by the same number of upstream neighbors. This means that all non-direct monitoring nodes normally will receive sqrt(N) indications that a node is gone. - A major drawback with ring monitoring is how it handles failures that cause massive network partitionings. If both a lost node and all its direct monitoring neighbors are inside the lost partition, the nodes in the remaining partition will never receive indications about the loss. To overcome this, each node also chooses to actively monitor some nodes outside its local domain. Those nodes are called remote domain "heads", and are selected in such a way that no node in the cluster will be more than two direct monitoring hops away. Because of this, each node, apart from monitoring the member of its local domain, will also typically monitor sqrt(N) remote head nodes. - As an optimization, local list status, domain status and domain records are marked with a generation number. This saves senders from unnecessarily conveying unaltered domain records, and receivers from performing unneeded re-adaptations of their node monitoring list, such as re-assigning domain heads. - As a measure of caution we have added the possibility to disable the new algorithm through configuration. We do this by keeping a threshold value for the cluster size; a cluster that grows beyond this value will switch from full-mesh to ring monitoring, and vice versa when it shrinks below the value. This means that if the threshold is set to a value larger than any anticipated cluster size (default size is 32) the new algorithm is effectively disabled. A patch set for altering the threshold value and for listing the table contents will follow shortly. - This change is fully backwards compatible. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7 |
|
#
5b7066c3 |
| 07-Apr-2016 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: stricter filtering of packets in bearer layer Resetting a bearer/interface, with the consequence of resetting all its pertaining links, is not an atomic action. This becomes partic
tipc: stricter filtering of packets in bearer layer Resetting a bearer/interface, with the consequence of resetting all its pertaining links, is not an atomic action. This becomes particularly evident in very large clusters, where a lot of traffic may happen on the remaining links while we are busy shutting them down. In extreme cases, we may even see links being re-created and re-established before we are finished with the job. To solve this, we now introduce a solution where we temporarily detach the bearer from the interface when the bearer is reset. This inhibits all packet reception, while sending still is possible. For the latter, we use the fact that the device's user pointer now is zero to filter out which packets can be sent during this situation; i.e., outgoing RESET messages only. This filtering serves to speed up the neighbors' detection of the loss event, and saves us from unnecessary probing. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
4e801fa1 |
| 07-Apr-2016 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: eliminate buffer leak in bearer layer When enabling a bearer we create a 'neigbor discoverer' instance by calling the function tipc_disc_create() before the bearer is actually
tipc: eliminate buffer leak in bearer layer When enabling a bearer we create a 'neigbor discoverer' instance by calling the function tipc_disc_create() before the bearer is actually registered in the list of enabled bearers. Because of this, the very first discovery broadcast message, created by the mentioned function, is lost, since it cannot find any valid bearer to use. Furthermore, the used send function, tipc_bearer_xmit_skb() does not free the given buffer when it cannot find a bearer, resulting in the leak of exactly one send buffer each time a bearer is enabled. This commit fixes this problem by introducing two changes: 1) Instead of attemting to send the discovery message directly, we let tipc_disc_create() return the discovery buffer to the calling function, tipc_enable_bearer(), so that the latter can send it when the enabling sequence is finished. 2) In tipc_bearer_xmit_skb(), as well as in the two other transmit functions at the bearer layer, we now free the indicated buffer or buffer chain when a valid bearer cannot be found. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5 |
|
#
49cc66ea |
| 04-Mar-2016 |
Richard Alpe <richard.alpe@ericsson.com> |
tipc: move netlink policies to netlink.c Make the c files less cluttered and enable netlink attributes to be shared between files. Signed-off-by: Richard Alpe <richard.alpe@eric
tipc: move netlink policies to netlink.c Make the c files less cluttered and enable netlink attributes to be shared between files. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1 |
|
#
1a90632d |
| 19-Nov-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: eliminate remnants of hungarian notation The number of variables with Hungarian notation (l_ptr, n_ptr etc.) has been significantly reduced over the last couple of years.
tipc: eliminate remnants of hungarian notation The number of variables with Hungarian notation (l_ptr, n_ptr etc.) has been significantly reduced over the last couple of years. We now root out the last traces of this practice. There are no functional changes in this commit. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1 |
|
#
2af5ae37 |
| 22-Oct-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: clean up unused code and structures After the previous changes in this series, we can now remove some unused code and structures, both in the broadcast, link aggregation and li
tipc: clean up unused code and structures After the previous changes in this series, we can now remove some unused code and structures, both in the broadcast, link aggregation and link code. There are no functional changes in this commit. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
7214bcf8 |
| 22-Oct-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: eliminate redundant buffer cloning at transmission Since all packet transmitters (link, bcast, discovery) are now sending consumable buffer clones to the bearer layer, we can remov
tipc: eliminate redundant buffer cloning at transmission Since all packet transmitters (link, bcast, discovery) are now sending consumable buffer clones to the bearer layer, we can remove the redundant buffer cloning that is perfomed in the lower level functions tipc_l2_send_msg() and tipc_udp_send_msg(). Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
60852d67 |
| 22-Oct-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: let neighbor discoverer tranmsit consumable buffers The neighbor discovery function currently uses the function tipc_bearer_send() for transmitting packets, assuming that the s
tipc: let neighbor discoverer tranmsit consumable buffers The neighbor discovery function currently uses the function tipc_bearer_send() for transmitting packets, assuming that the sent buffers are not consumed by the called function. We want to change this, in order to avoid unnecessary buffer cloning elswhere in the code. This commit introduces a new function tipc_bearer_skb() which consumes the sent buffers, and let the discoverer functions use this new call instead. The discoverer does now itself perform the cloning when that is necessary. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
959e1781 |
| 22-Oct-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: introduce jumbo frame support for broadcast Until now, we have only been supporting a fix MTU size of 1500 bytes for all broadcast media, irrespective of their actual capability.
tipc: introduce jumbo frame support for broadcast Until now, we have only been supporting a fix MTU size of 1500 bytes for all broadcast media, irrespective of their actual capability. We now make the broadcast MTU adaptable to the carrying media, i.e., we use the smallest MTU supported by any of the interfaces attached to TIPC. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
b06b281e |
| 22-Oct-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: simplify bearer level broadcast Until now, we have been keeping track of the exact set of broadcast destinations though the help structure tipc_node_map. This leads us to have
tipc: simplify bearer level broadcast Until now, we have been keeping track of the exact set of broadcast destinations though the help structure tipc_node_map. This leads us to have to maintain a whole infrastructure for supporting this, including a pseudo-bearer and a number of functions to manipulate both the bearers and the node map correctly. Apart from the complexity, this approach is also limiting, as struct tipc_node_map only can support cluster local broadcast if we want to avoid it becoming excessively large. We want to eliminate this limitation, in order to enable introduction of scoped multicast in the future. A closer analysis reveals that it is unnecessary maintaining this "full set" overview; it is sufficient to keep a counter per bearer, indicating how many nodes can be reached via this bearer at the moment. The protocol is now robust enough to handle transitional discrepancies between the nominal number of reachable destinations, as expected by the broadcast protocol itself, and the number which is actually reachable at the moment. The initial broadcast synchronization, in conjunction with the retransmission mechanism, ensures that all packets will eventually be acknowledged by the correct set of destinations. This commit introduces these changes. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
282b3a05 |
| 15-Oct-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: send out RESET immediately when link goes down When a link is taken down because of a node local event, such as disabling of a bearer or an interface, we currently leave it to the
tipc: send out RESET immediately when link goes down When a link is taken down because of a node local event, such as disabling of a bearer or an interface, we currently leave it to the peer node to discover the broken communication. The default time for such failure discovery is 1.5-2 seconds. If we instead allow the terminating link endpoint to send out a RESET message at the moment it is reset, we can achieve the impression that both endpoints are going down instantly. Since this is a very common scenario, we find it worthwhile to make this small modification. Apart from letting the link produce the said message, we also have to ensure that the interface is able to transmit it before TIPC is detached. We do this by performing the disabling of a bearer in three steps: 1) Disable reception of TIPC packets from the interface in question. 2) Take down the links, while allowing them so send out a RESET message. 3) Disable transmission of TIPC packets on the interface. Apart from this, we now have to react on the NETDEV_GOING_DOWN event, instead of as currently the NEDEV_DOWN event, to ensure that such transmission is possible during the teardown phase. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5 |
|
#
6144a996 |
| 30-Jul-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: move all link_reset() calls to link aggregation level In line with our effort to let the node level have full control over its links, we want to move all link reset calls from link
tipc: move all link_reset() calls to link aggregation level In line with our effort to let the node level have full control over its links, we want to move all link reset calls from link.c to node.c. Some of the calls can be moved by simply moving the calling function, when this is the right thing to do. For the remaining calls we use the now established technique of returning a TIPC_LINK_DOWN_EVT flag from tipc_link_rcv(), whereafter we perform the reset call when the call returns. This change serves as a preparation for the coming commits. Tested-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.2-rc4, v4.2-rc3 |
|
#
af9b028e |
| 16-Jul-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: make media xmit call outside node spinlock context Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significa
tipc: make media xmit call outside node spinlock context Currently, message sending is performed through a deep call chain, where the node spinlock is grabbed and held during a significant part of the transmission time. This is clearly detrimental to overall throughput performance; it would be better if we could send the message after the spinlock has been released. In this commit, we do instead let the call revert on the stack after the buffer chain has been added to the transmission queue, whereafter clones of the buffers are transmitted to the device layer outside the spinlock scope. As a further step in our effort to separate the roles of the node and link entities we also move the function tipc_link_xmit() to node.c, and rename it to tipc_node_xmit(). Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4 |
|
#
b1c29f6b |
| 14-May-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: simplify resetting and disabling of bearers Since commit 4b475e3f2f8e4e241de101c8240f1d74d0470494 ("tipc: eliminate delayed link deletion at link failover") the extra boolean p
tipc: simplify resetting and disabling of bearers Since commit 4b475e3f2f8e4e241de101c8240f1d74d0470494 ("tipc: eliminate delayed link deletion at link failover") the extra boolean parameter "shutting_down" is not any longer needed for the functions bearer_disable() and tipc_link_delete_list(). Furhermore, the function tipc_link_reset_links(), called from bearer_reset() is now unnecessary. We can just as well delete all the links, as we do in bearer_disable(), and start over with creating new links. This commit introduces those changes. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.1-rc3 |
|
#
c3d6fb85 |
| 06-May-2015 |
Richard Alpe <richard.alpe@ericsson.com> |
tipc: fix default link prop regression in nl compat Default link properties can be set for media or bearer. This functionality was missed when introducing the NL compatibility layer.
tipc: fix default link prop regression in nl compat Default link properties can be set for media or bearer. This functionality was missed when introducing the NL compatibility layer. This patch implements this functionality in the compat netlink layer. It works the same way as it did in the old API. We search for media and bearers matching the "link name". If we find a matching media or bearer the link tolerance, priority or window is used as default for new links on that media or bearer. Fixes: 37e2d4843f9e (tipc: convert legacy nl link prop set to nl compat) Reported-by: Tomi Ollila <tomi.ollila@iki.fi> Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.1-rc2 |
|
#
f2f67390 |
| 28-Apr-2015 |
Nicolas Dichtel <nicolas.dichtel@6wind.com> |
tipc: remove wrong use of NLM_F_MULTI NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will w
tipc: remove wrong use of NLM_F_MULTI NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 35b9dd7607f0 ("tipc: add bearer get/dump to new netlink api") Fixes: 7be57fc69184 ("tipc: add link get/dump to new netlink api") Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api") CC: Richard Alpe <richard.alpe@ericsson.com> CC: Jon Maloy <jon.maloy@ericsson.com> CC: Ying Xue <ying.xue@windriver.com> CC: tipc-discussion@lists.sourceforge.net Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4 |
|
#
169bf912 |
| 10-Mar-2015 |
Jon Paul Maloy <jon.maloy@ericsson.com> |
tipc: ensure that idle links are deleted when a bearer is disabled commit afaa3f65f65fda2e7b190aac7e2a75d9a2a77cb6 (tipc: purge links when bearer is disabled) was an attempt to resolve
tipc: ensure that idle links are deleted when a bearer is disabled commit afaa3f65f65fda2e7b190aac7e2a75d9a2a77cb6 (tipc: purge links when bearer is disabled) was an attempt to resolve a problem that turned out to have a more profound reason. When we disable a bearer, we delete all its pertaining links if there is no other bearer to perform failover to, or if the module is shutting down. In case there are dual bearers, we wait with deleting links until the failover procedure is finished. However, this misses the case when a link on the removed bearer was already down, so that there will be no failover procedure to finish the link delete. This causes confusion if a new bearer is added to replace the removed one, and also entails a small memory leak. This commit takes the current state of the link into account when deciding when to delete it, and also reverses the above-mentioned commit. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.0-rc3 |
|
#
d0f91938 |
| 05-Mar-2015 |
Erik Hugne <erik.hugne@ericsson.com> |
tipc: add ip/udp media type The ip/udp bearer can be configured in a point-to-point mode by specifying both local and remote ip/hostname, or it can be enabled in multicast mode, wher
tipc: add ip/udp media type The ip/udp bearer can be configured in a point-to-point mode by specifying both local and remote ip/hostname, or it can be enabled in multicast mode, where links are established to all tipc nodes that have joined the same multicast group. The multicast IP address is generated based on the TIPC network ID, but can be overridden by using another multicast address as remote ip. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.0-rc2 |
|
#
afaa3f65 |
| 27-Feb-2015 |
Erik Hugne <erik.hugne@ericsson.com> |
tipc: purge links when bearer is disabled If a bearer is disabled by manual intervention, all links over that bearer should be purged, indicated with the 'shutting_down' flag. Otherw
tipc: purge links when bearer is disabled If a bearer is disabled by manual intervention, all links over that bearer should be purged, indicated with the 'shutting_down' flag. Otherwise tipc will get confused if a new bearer is enabled using a different media type. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
Revision tags: v4.0-rc1 |
|
#
941787b8 |
| 09-Feb-2015 |
Richard Alpe <richard.alpe@ericsson.com> |
tipc: remove tipc_snprintf tipc_snprintf() was heavily utilized by the old netlink API which no longer exists (now netlink compat). In this patch we swap tipc_snprintf() to the
tipc: remove tipc_snprintf tipc_snprintf() was heavily utilized by the old netlink API which no longer exists (now netlink compat). In this patch we swap tipc_snprintf() to the identical scnprintf() in the only remaining occurrence. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
22ae7cff |
| 09-Feb-2015 |
Richard Alpe <richard.alpe@ericsson.com> |
tipc: nl compat add noop and remove legacy nl framework Add TIPC_CMD_NOOP to compat layer and remove the old framework. All legacy nl commands are now converted to the compat layer
tipc: nl compat add noop and remove legacy nl framework Add TIPC_CMD_NOOP to compat layer and remove the old framework. All legacy nl commands are now converted to the compat layer in netlink_compat.c. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
#
5bfc335a |
| 09-Feb-2015 |
Richard Alpe <richard.alpe@ericsson.com> |
tipc: convert legacy nl media dump to nl compat Convert TIPC_CMD_GET_MEDIA_NAMES to compat dumpit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugn
tipc: convert legacy nl media dump to nl compat Convert TIPC_CMD_GET_MEDIA_NAMES to compat dumpit. Signed-off-by: Richard Alpe <richard.alpe@ericsson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|