SUNRPC: Update comments based on recent changes

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

SUNRPC: Start the first major timeout calculation at task creation

When calculating the major timeout for a new task, when we know that the
connection has been broken, use the task->tk_start to ensu

SUNRPC: Start the first major timeout calculation at task creation

When calculating the major timeout for a new task, when we know that the
connection has been broken, use the task->tk_start to ensure that we also
take into account the time spent waiting for a slot or session slot. This
ensures that we fail over soft requests relatively quickly once the
connection has actually been broken, and the first requests have
started to fail.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Ensure that the transport layer respect major timeouts

Ensure that when in the transport layer, we don't sleep past
a major timeout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammersp

SUNRPC: Ensure that the transport layer respect major timeouts

Ensure that when in the transport layer, we don't sleep past
a major timeout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Declare RPC timers as TIMER_DEFERRABLE

Don't wake idle CPUs only for the purpose of servicing an RPC
queue timeout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-o

SUNRPC: Declare RPC timers as TIMER_DEFERRABLE

Don't wake idle CPUs only for the purpose of servicing an RPC
queue timeout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Add function rpc_sleep_on_timeout()

Clean up the RPC task sleep interfaces by replacing the task->tk_timeout
'hidden parameter' to rpc_sleep_on() with a new function that takes an
absolute t

SUNRPC: Add function rpc_sleep_on_timeout()

Clean up the RPC task sleep interfaces by replacing the task->tk_timeout
'hidden parameter' to rpc_sleep_on() with a new function that takes an
absolute timeout.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Refactor xprt_request_wait_receive()

Convert the transport callback to actually put the request to sleep
instead of just setting a timeout. This is in preparation for
rpc_sleep_on_timeout().

SUNRPC: Refactor xprt_request_wait_receive()

Convert the transport callback to actually put the request to sleep
instead of just setting a timeout. This is in preparation for
rpc_sleep_on_timeout().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Fix up task signalling

The RPC_TASK_KILLED flag should really not be set from another context
because it can clobber data in the struct task when task->tk_flags is
changed non-atomically.
Le

SUNRPC: Fix up task signalling

The RPC_TASK_KILLED flag should really not be set from another context
because it can clobber data in the struct task when task->tk_flags is
changed non-atomically.
Let's therefore swap out RPC_TASK_KILLED with an atomic flag, and add
a function to set that flag and safely wake up the task.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Use the ENOTCONN error on socket disconnect

When the socket is closed, we currently send an EAGAIN error to all
pending requests in order to ask them to retransmit. Use ENOTCONN
instead, to

SUNRPC: Use the ENOTCONN error on socket disconnect

When the socket is closed, we currently send an EAGAIN error to all
pending requests in order to ask them to retransmit. Use ENOTCONN
instead, to ensure that they try to reconnect before attempting to
transmit.
This also helps SOFTCONN tasks to behave correctly in this
situation.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated

If a layout segment gets invalidated while a pNFS I/O operation
is queued for transmission, then we ideally want to abort
immed

NFSv4/flexfiles: Abort I/O early if the layout segment was invalidated

If a layout segment gets invalidated while a pNFS I/O operation
is queued for transmission, then we ideally want to abort
immediately. This is particularly the case when there is a large
number of I/O related RPCs queued in the RPC layer, and the layout
segment gets invalidated due to an ENOSPC error, or an EACCES (because
the client was fenced). We may end up forced to spam the MDS with a
lot of otherwise unnecessary LAYOUTERRORs after that I/O fails.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

SUNRPC: Convert socket page send code to use iov_iter()

Simplify the page send code using iov_iter and bvecs.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

SUNRPC: Ensure rq_bytes_sent is reset before request transmission

When we resend a request, ensure that the 'rq_bytes_sent' is reset
to zero.

Signed-off-by: Trond Myklebust <trond.myklebust@hammers

SUNRPC: Ensure rq_bytes_sent is reset before request transmission

When we resend a request, ensure that the 'rq_bytes_sent' is reset
to zero.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

SUNRPC: Set memalloc_nofs_save() on all rpciod/xprtiod jobs

Set memalloc_nofs_save() on all the rpciod/xprtiod jobs so that we
ensure memory allocations for asynchronous rpc calls don't ever end
up

SUNRPC: Set memalloc_nofs_save() on all rpciod/xprtiod jobs

Set memalloc_nofs_save() on all the rpciod/xprtiod jobs so that we
ensure memory allocations for asynchronous rpc calls don't ever end
up recursing back to the NFS layer for memory reclaim.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

SUNRPC: Introduce trace points in rpc_auth_gss.ko

Add infrastructure for trace points in the RPC_AUTH_GSS kernel
module, and add a few sample trace points. These report exceptional
or unexpected eve

SUNRPC: Introduce trace points in rpc_auth_gss.ko

Add infrastructure for trace points in the RPC_AUTH_GSS kernel
module, and add a few sample trace points. These report exceptional
or unexpected events, and observe the assignment of GSS sequence
numbers.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Address Kerberos performance/behavior regression

When using Kerberos with v4.20, I've observed frequent connection
loss on heavy workloads. I traced it down to the client underrunning
the GS

SUNRPC: Address Kerberos performance/behavior regression

When using Kerberos with v4.20, I've observed frequent connection
loss on heavy workloads. I traced it down to the client underrunning
the GSS sequence number window -- NFS servers are required to drop
the RPC with the low sequence number, and also drop the connection
to signal that an RPC was dropped.

Bisected to commit 918f3c1fe83c ("SUNRPC: Improve latency for
interactive tasks").

I've got a one-line workaround for this issue, which is easy to
backport to v4.20 while a more permanent solution is being derived.
Essentially, tk_owner-based sorting is disabled for RPCs that carry
a GSS sequence number.

Fixes: 918f3c1fe83c ("SUNRPC: Improve latency for interactive ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Ensure rq_bytes_sent is reset before request transmission

When we resend a request, ensure that the 'rq_bytes_sent' is reset
to zero.

Signed-off-by: Trond Myklebust <trond.myklebust@hammers

SUNRPC: Ensure rq_bytes_sent is reset before request transmission

When we resend a request, ensure that the 'rq_bytes_sent' is reset
to zero.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Remove xprt_connect_status()

Over the years, xprt_connect_status() has been superseded by
call_connect_status(), which now handles all the errors that
xprt_connect_status() does and more. Si

SUNRPC: Remove xprt_connect_status()

Over the years, xprt_connect_status() has been superseded by
call_connect_status(), which now handles all the errors that
xprt_connect_status() does and more. Since the latter converts
all errors that it doesn't recognise to EIO, then it is time
for it to be retired.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>

show more ...

SUNRPC: Fix disconnection races

When the socket is closed, we need to call xprt_disconnect_done() in order
to clean up the XPRT_WRITE_SPACE flag, and wake up the sleeping tasks.

However, we also wa

SUNRPC: Fix disconnection races

When the socket is closed, we need to call xprt_disconnect_done() in order
to clean up the XPRT_WRITE_SPACE flag, and wake up the sleeping tasks.

However, we also want to ensure that we don't wake them up before the socket
is closed, since that would cause thundering herd issues with everyone
piling up to retransmit before the TCP shutdown dance has completed.
Only the task that holds XPRT_LOCKED needs to wake up early in order to
allow the close to complete.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Reported-by: Scott Mayhew <smayhew@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>

show more ...

SUNRPC: Fix a potential race in xprt_connect()

If an asynchronous connection attempt completes while another task is
in xprt_connect(), then the call to rpc_sleep_on() could end up
racing with the c

SUNRPC: Fix a potential race in xprt_connect()

If an asynchronous connection attempt completes while another task is
in xprt_connect(), then the call to rpc_sleep_on() could end up
racing with the call to xprt_wake_pending_tasks().
So add a second test of the connection state after we've put the
task to sleep and set the XPRT_CONNECTING flag, when we know that there
can be no asynchronous connection attempts still in progress.

Fixes: 0b9e79431377d ("SUNRPC: Move the test for XPRT_CONNECTING into...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

SUNRPC: Fix a memory leak in call_encode()

If we retransmit an RPC request, we currently end up clobbering the
value of req->rq_rcv_buf.bvec that was allocated by the initial call to
xprt_request_pr

SUNRPC: Fix a memory leak in call_encode()

If we retransmit an RPC request, we currently end up clobbering the
value of req->rq_rcv_buf.bvec that was allocated by the initial call to
xprt_request_prepare(req).

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

sunrpc: Fix connect metrics

For TCP, the logic in xprt_connect_status is currently never invoked
to record a successful connection. Commit 2a4919919a97 ("SUNRPC:
Return EAGAIN instead of ENOTCONN wh

sunrpc: Fix connect metrics

For TCP, the logic in xprt_connect_status is currently never invoked
to record a successful connection. Commit 2a4919919a97 ("SUNRPC:
Return EAGAIN instead of ENOTCONN when waking up xprt->pending")
changed the way TCP xprt's are awoken after a connect succeeds.

Instead, change connection-oriented transports to bump connect_count
and compute connect_time the moment that XPRT_CONNECTED is set.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

show more ...

SUNRPC: Add a bvec array to struct xdr_buf for use with iovec_iter()

Add a bvec array to struct xdr_buf, and have the client allocate it
when we need to receive data into pages.

Signed-off-by: Tron

SUNRPC: Add a bvec array to struct xdr_buf for use with iovec_iter()

Add a bvec array to struct xdr_buf, and have the client allocate it
when we need to receive data into pages.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

SUNRPC: Convert the xprt->sending queue back to an ordinary wait queue

We no longer need priority semantics on the xprt->sending queue, because
the order in which tasks are sent is now dictated by t

SUNRPC: Convert the xprt->sending queue back to an ordinary wait queue

We no longer need priority semantics on the xprt->sending queue, because
the order in which tasks are sent is now dictated by their position in
the send queue.
Note that the backlog queue remains a priority queue, meaning that
slot resources are still managed in order of task priority.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

SUNRPC: Convert xprt receive queue to use an rbtree

If the server is slow, we can find ourselves with quite a lot of entries
on the receive queue. Converting the search from an O(n) to O(log(n))
can

SUNRPC: Convert xprt receive queue to use an rbtree

If the server is slow, we can find ourselves with quite a lot of entries
on the receive queue. Converting the search from an O(n) to O(log(n))
can make a significant difference, particularly since we have to hold
a number of locks while searching.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

show more ...

SUNRPC: Don't take transport->lock unnecessarily when taking XPRT_LOCK

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>

SUNRPC: Cleanup: remove the unused 'task' argument from the request_send()

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>