|
Revision tags: v5.10.66, v5.14.5, v5.14.4, v5.10.65 |
|
| #
1e080f17 |
| 13-Sep-2021 |
Jakub Kicinski <kuba@kernel.org> |
net: sched: update default qdisc visibility after Tx queue cnt changes
mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
net: sched: update default qdisc visibility after Tx queue cnt changes
mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
device is registered. Depending on order of calls in the driver,
or if user space changes config via ethtool -L the number of
qdiscs visible under tc qdisc show will differ from the number
of queues. This is confusing to users and potentially to system
configuration scripts which try to make sure qdiscs have the
right parameters.
Add a new Qdisc_ops callback and make relevant qdiscs TTRT.
Note that this uncovers the "shortcut" created by
commit 1f27cde313d7 ("net: sched: use pfifo_fast for non real queues")
The default child qdiscs beyond initial real_num_tx are always
pfifo_fast, no matter what the sysfs setting is. Fixing this
gets a little tricky because we'd need to keep a reference
on whatever the default qdisc was at the time of creation.
In practice this is likely an non-issue the qdiscs likely have
to be configured to non-default settings, so whatever user space
is doing such configuration can replace the pfifos... now that
it will see them.
Reported-by: Matthew Massey <matthewmassey@fb.com>
Reviewed-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
a420d587 |
| 26-Aug-2022 |
Wang Hai <wanghai38@huawei.com> |
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0
net/sched: fix netdevice reference leaks in attach_default_qdiscs()
[ Upstream commit f612466ebecb12a00d9152344ddda6f6345f04dc ]
In attach_default_qdiscs(), if a dev has multiple queues and queue 0 fails
to attach qdisc because there is no memory in attach_one_default_qdisc().
Then dev->qdisc will be noop_qdisc by default. But the other queues may be
able to successfully attach to default qdisc.
In this case, the fallback to noqueue process will be triggered. If the
original attached qdisc is not released and a new one is directly
attached, this will cause netdevice reference leaks.
The following is the bug log:
veth0: default qdisc (fq_codel) fail, fallback to noqueue
unregister_netdevice: waiting for veth0 to become free. Usage count = 32
leaked reference.
qdisc_alloc+0x12e/0x210
qdisc_create_dflt+0x62/0x140
attach_one_default_qdisc.constprop.41+0x44/0x70
dev_activate+0x128/0x290
__dev_open+0x12a/0x190
__dev_change_flags+0x1a2/0x1f0
dev_change_flags+0x23/0x60
do_setlink+0x332/0x1150
__rtnl_newlink+0x52f/0x8e0
rtnl_newlink+0x43/0x70
rtnetlink_rcv_msg+0x140/0x3b0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1bb/0x290
netlink_sendmsg+0x37c/0x4e0
sock_sendmsg+0x5f/0x70
____sys_sendmsg+0x208/0x280
Fix this bug by clearing any non-noop qdiscs that may have been assigned
before trying to re-attach.
Fixes: bf6dba76d278 ("net: sched: fallback to qdisc noqueue if default qdisc setup fail")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20220826090055.24424-1-wanghai38@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
572d4cdf |
| 23-Aug-2022 |
Kuniyuki Iwashima <kuniyu@amazon.com> |
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to
net: Fix data-races around weight_p and dev_weight_[rt]x_bias.
[ Upstream commit bf955b5ab8f6f7b0632cdef8e36b14e4f6e77829 ]
While reading weight_p, it can be changed concurrently. Thus, we need
to add READ_ONCE() to its reader.
Also, dev_[rt]x_weight can be read/written at the same time. So, we
need to use READ_ONCE() and WRITE_ONCE() for its access. Moreover, to
use the same weight_p while changing dev_[rt]x_weight, we add a mutex
in proc_do_dev_weight().
Fixes: 3d48b53fb2ae ("net: dev_weight: TX/RX orthogonality")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
| #
9bb363ba |
| 11-Feb-2022 |
Eric Dumazet <edumazet@google.com> |
net_sched: add __rcu annotation to netdev->qdisc
commit 5891cd5ec46c2c2eb6427cb54d214b149635dd0e upstream.
syzbot found a data-race [1] which lead me to add __rcu
annotations to netdev->qdisc, and
net_sched: add __rcu annotation to netdev->qdisc
commit 5891cd5ec46c2c2eb6427cb54d214b149635dd0e upstream.
syzbot found a data-race [1] which lead me to add __rcu
annotations to netdev->qdisc, and proper accessors
to get LOCKDEP support.
[1]
BUG: KCSAN: data-race in dev_activate / qdisc_lookup_rcu
write to 0xffff888168ad6410 of 8 bytes by task 13559 on cpu 1:
attach_default_qdiscs net/sched/sch_generic.c:1167 [inline]
dev_activate+0x2ed/0x8f0 net/sched/sch_generic.c:1221
__dev_open+0x2e9/0x3a0 net/core/dev.c:1416
__dev_change_flags+0x167/0x3f0 net/core/dev.c:8139
rtnl_configure_link+0xc2/0x150 net/core/rtnetlink.c:3150
__rtnl_newlink net/core/rtnetlink.c:3489 [inline]
rtnl_newlink+0xf4d/0x13e0 net/core/rtnetlink.c:3529
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2496
__do_sys_sendmsg net/socket.c:2505 [inline]
__se_sys_sendmsg net/socket.c:2503 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
read to 0xffff888168ad6410 of 8 bytes by task 13560 on cpu 0:
qdisc_lookup_rcu+0x30/0x2e0 net/sched/sch_api.c:323
__tcf_qdisc_find+0x74/0x3a0 net/sched/cls_api.c:1050
tc_del_tfilter+0x1c7/0x1350 net/sched/cls_api.c:2211
rtnetlink_rcv_msg+0x5ba/0x7e0 net/core/rtnetlink.c:5585
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2496
__do_sys_sendmsg net/socket.c:2505 [inline]
__se_sys_sendmsg net/socket.c:2503 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0xffffffff85dee080 -> 0xffff88815d96ec00
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 13560 Comm: syz-executor.2 Not tainted 5.17.0-rc3-syzkaller-00116-gf1baf68e1383-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 470502de5bdb ("net: sched: unlock rules update API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
b4e6455d |
| 12-Jan-2022 |
Kevin Bracey <kevin@bracey.fi> |
net_sched: restore "mpu xxx" handling
commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.
commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and
net_sched: restore "mpu xxx" handling
commit fb80445c438c78b40b547d12b8d56596ce4ccfeb upstream.
commit 56b765b79e9a ("htb: improved accuracy at high rates") broke
"overhead X", "linklayer atm" and "mpu X" attributes.
"overhead X" and "linklayer atm" have already been fixed. This restores
the "mpu X" handling, as might be used by DOCSIS or Ethernet shaping:
tc class add ... htb rate X overhead 4 mpu 64
The code being fixed is used by htb, tbf and act_police. Cake has its
own mpu handling. qdisc_calculate_pkt_len still uses the size table
containing values adjusted for mpu by user space.
iproute2 tc has always passed mpu into the kernel via a tc_ratespec
structure, but the kernel never directly acted on it, merely stored it
so that it could be read back by `tc class show`.
Rather, tc would generate length-to-time tables that included the mpu
(and linklayer) in their construction, and the kernel used those tables.
Since v3.7, the tables were no longer used. Along with "mpu", this also
broke "overhead" and "linklayer" which were fixed in 01cb71d2d47b
("net_sched: restore "overhead xxx" handling", v3.10) and 8a8e3d84b171
("net_sched: restore "linklayer atm" handling", v3.11).
"overhead" was fixed by simply restoring use of tc_ratespec::overhead -
this had originally been used by the kernel but was initially omitted
from the new non-table-based calculations.
"linklayer" had been handled in the table like "mpu", but the mode was
not originally passed in tc_ratespec. The new implementation was made to
handle it by getting new versions of tc to pass the mode in an extended
tc_ratespec, and for older versions of tc the table contents were analysed
at load time to deduce linklayer.
As "mpu" has always been given to the kernel in tc_ratespec,
accompanying the mpu-based table, we can restore system functionality
with no userspace change by making the kernel act on the tc_ratespec
value.
Fixes: 56b765b79e9a ("htb: improved accuracy at high rates")
Signed-off-by: Kevin Bracey <kevin@bracey.fi>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Vimalkumar <j.vimal@gmail.com>
Link: https://lore.kernel.org/r/20220112170210.1014351-1-kevin@bracey.fi
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
| #
ae11b215 |
| 13-Sep-2021 |
Jakub Kicinski <kuba@kernel.org> |
net: sched: update default qdisc visibility after Tx queue cnt changes
[ Upstream commit 1e080f17750d1083e8a32f7b350584ae1cd7ff20 ]
mq / mqprio make the default child qdiscs visible. They only do
s
net: sched: update default qdisc visibility after Tx queue cnt changes
[ Upstream commit 1e080f17750d1083e8a32f7b350584ae1cd7ff20 ]
mq / mqprio make the default child qdiscs visible. They only do
so for the qdiscs which are within real_num_tx_queues when the
device is registered. Depending on order of calls in the driver,
or if user space changes config via ethtool -L the number of
qdiscs visible under tc qdisc show will differ from the number
of queues. This is confusing to users and potentially to system
configuration scripts which try to make sure qdiscs have the
right parameters.
Add a new Qdisc_ops callback and make relevant qdiscs TTRT.
Note that this uncovers the "shortcut" created by
commit 1f27cde313d7 ("net: sched: use pfifo_fast for non real queues")
The default child qdiscs beyond initial real_num_tx are always
pfifo_fast, no matter what the sysfs setting is. Fixing this
gets a little tricky because we'd need to keep a reference
on whatever the default qdisc was at the time of creation.
In practice this is likely an non-issue the qdiscs likely have
to be configured to non-default settings, so whatever user space
is doing such configuration can replace the pfifos... now that
it will see them.
Reported-by: Matthew Massey <matthewmassey@fb.com>
Reviewed-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
show more ...
|
|
Revision tags: v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60 |
|
| #
06f5553e |
| 03-Aug-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: sched: fix lockdep_set_class() typo error for sch->seqlock
According to comment in qdisc_alloc(), sch->seqlock's lockdep
class key should be set to qdisc_tx_busylock, due to possible
type error
net: sched: fix lockdep_set_class() typo error for sch->seqlock
According to comment in qdisc_alloc(), sch->seqlock's lockdep
class key should be set to qdisc_tx_busylock, due to possible
type error, sch->busylock's lockdep class key is set to
qdisc_tx_busylock, which is duplicated because sch->busylock's
lockdep class key is already set in qdisc_alloc().
So fix it by replacing sch->busylock with sch->seqlock.
Fixes: 96009c7d500e ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
|
Revision tags: v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46 |
|
| #
d3e0f575 |
| 22-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: sched: remove qdisc->empty for lockless qdisc
As MISSED and DRAINING state are used to indicate a non-empty
qdisc, qdisc->empty is not longer needed, so remove it.
Acked-by: Jakub Kicinski <ku
net: sched: remove qdisc->empty for lockless qdisc
As MISSED and DRAINING state are used to indicate a non-empty
qdisc, qdisc->empty is not longer needed, so remove it.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|
| #
c4fef01b |
| 22-Jun-2021 |
Yunsheng Lin <linyunsheng@huawei.com> |
net: sched: implement TCQ_F_CAN_BYPASS for lockless qdisc
Currently pfifo_fast has both TCQ_F_CAN_BYPASS and TCQ_F_NOLOCK
flag set, but queue discipline by-pass does not work for lockless
qdisc beca
net: sched: implement TCQ_F_CAN_BYPASS for lockless qdisc
Currently pfifo_fast has both TCQ_F_CAN_BYPASS and TCQ_F_NOLOCK
flag set, but queue discipline by-pass does not work for lockless
qdisc because skb is always enqueued to qdisc even when the qdisc
is empty, see __dev_xmit_skb().
This patch calls sch_direct_xmit() to transmit the skb directly
to the driver for empty lockless qdisc, which aviod enqueuing
and dequeuing operation.
As qdisc->empty is not reliable to indicate a empty qdisc because
there is a time window between enqueuing and setting qdisc->empty.
So we use the MISSED state added in commit a90c57f2cedd ("net:
sched: fix packet stuck problem for lockless qdisc"), which
indicate there is lock contention, suggesting that it is better
not to do the qdisc bypass in order to avoid packet out of order
problem.
In order to make MISSED state reliable to indicate a empty qdisc,
we need to ensure that testing and clearing of MISSED state is
within the protection of qdisc->seqlock, only setting MISSED state
can be done without the protection of qdisc->seqlock. A MISSED
state testing is added without the protection of qdisc->seqlock to
aviod doing unnecessary spin_trylock() for contention case.
As the enqueuing is not within the protection of qdisc->seqlock,
there is still a potential data race as mentioned by Jakub [1]:
thread1 thread2 thread3
qdisc_run_begin() # true
qdisc_run_begin(q)
set(MISSED)
pfifo_fast_dequeue
clear(MISSED)
# recheck the queue
qdisc_run_end()
enqueue skb1
qdisc empty # true
qdisc_run_begin() # true
sch_direct_xmit() # skb2
qdisc_run_begin()
set(MISSED)
When above happens, skb1 enqueued by thread2 is transmited after
skb2 is transmited by thread3 because MISSED state setting and
enqueuing is not under the qdisc->seqlock. If qdisc bypass is
disabled, skb1 has better chance to be transmited quicker than
skb2.
This patch does not take care of the above data race, because we
view this as similar as below:
Even at the same time CPU1 and CPU2 write the skb to two socket
which both heading to the same qdisc, there is no guarantee that
which skb will hit the qdisc first, because there is a lot of
factor like interrupt/softirq/cache miss/scheduling afffecting
that.
There are below cases that need special handling:
1. When MISSED state is cleared before another round of dequeuing
in pfifo_fast_dequeue(), and __qdisc_run() might not be able to
dequeue all skb in one round and call __netif_schedule(), which
might result in a non-empty qdisc without MISSED set. In order
to avoid this, the MISSED state is set for lockless qdisc and
__netif_schedule() will be called at the end of qdisc_run_end.
2. The MISSED state also need to be set for lockless qdisc instead
of calling __netif_schedule() directly when requeuing a skb for
a similar reason.
3. For netdev queue stopped case, the MISSED case need clearing
while the netdev queue is stopped, otherwise there may be
unnecessary __netif_schedule() calling. So a new DRAINING state
is added to indicate this case, which also indicate a non-empty
qdisc.
4. As there is already netif_xmit_frozen_or_stopped() checking in
dequeue_skb() and sch_direct_xmit(), which are both within the
protection of qdisc->seqlock, but the same checking in
__dev_xmit_skb() is without the protection, which might cause
empty indication of a lockless qdisc to be not reliable. So
remove the checking in __dev_xmit_skb(), and the checking in
the protection of qdisc->seqlock seems enough to avoid the cpu
consumption problem for netdev queue stopped case.
1. https://lkml.org/lkml/2021/5/29/215
Acked-by: Jakub Kicinski <kuba@kernel.org>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # flexcan
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
show more ...
|