[IPSEC]: Kill afinfo->nf_post_routing

After changeset:

[NETFILTER]: Introduce NF_INET_ hook values

It always evaluates to NF_INET_POST_ROUTING.

Signed-off-by: David S. Miller <davem@davemloft.ne

[IPSEC]: Kill afinfo->nf_post_routing

After changeset:

[NETFILTER]: Introduce NF_INET_ hook values

It always evaluates to NF_INET_POST_ROUTING.

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[NETFILTER]: Introduce NF_INET_ hook values

The IPv4 and IPv6 hook values are identical, yet some code tries to figure
out the "correct" value by looking at the address family. Introduce NF_INET_*
v

[NETFILTER]: Introduce NF_INET_ hook values

The IPv4 and IPv6 hook values are identical, yet some code tries to figure
out the "correct" value by looking at the address family. Introduce NF_INET_*
values for both IPv4 and IPv6. The old values are kept in a #ifndef __KERNEL__
section for userspace compatibility.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: Remove nhoff from xfrm_input

The nhoff field isn't actually necessary in xfrm_input. For tunnel
mode transforms we now throw away the output IP header so it makes no
sense to fill in the n

[IPSEC]: Remove nhoff from xfrm_input

The nhoff field isn't actually necessary in xfrm_input. For tunnel
mode transforms we now throw away the output IP header so it makes no
sense to fill in the nexthdr field. For transport mode we can now let
the function transport_finish do the setting and it knows where the
nexthdr field is.

The only other thing that needs the nexthdr field to be set is the
header extraction code. However, we can simply move the protocol
extraction out of the generic header extraction.

We want to minimise the amount of info we have to carry around between
transforms as this simplifies the resumption process for async crypto.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: Merge most of the input path

As part of the work on asynchronous cryptographic operations, we need
to be able to resume from the spot where they occur. As such, it
helps if we isolate them

[IPSEC]: Merge most of the input path

As part of the work on asynchronous cryptographic operations, we need
to be able to resume from the spot where they occur. As such, it
helps if we isolate them to one spot.

This patch moves most of the remaining family-specific processing into
the common input code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: Merge most of the output path

As part of the work on asynchrnous cryptographic operations, we need
to be able to resume from the spot where they occur. As such, it
helps if we isolate them

[IPSEC]: Merge most of the output path

As part of the work on asynchrnous cryptographic operations, we need
to be able to resume from the spot where they occur. As such, it
helps if we isolate them to one spot.

This patch moves most of the remaining family-specific processing into
the common output code.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: Separate inner/outer mode processing on input

With inter-family transforms the inner mode differs from the outer
mode. Attempting to handle both sides from the same function means
that it

[IPSEC]: Separate inner/outer mode processing on input

With inter-family transforms the inner mode differs from the outer
mode. Attempting to handle both sides from the same function means
that it needs to handle both IPv4 and IPv6 which creates duplication
and confusion.

This patch separates the two parts on the input path so that each
function deals with one family only.

In particular, the functions xfrm4_extract_inut/xfrm6_extract_inut
moves the pertinent fields from the IPv4/IPv6 IP headers into a
neutral format stored in skb->cb. This is then used by the inner mode
input functions to modify the inner IP header. In this way the input
function no longer has to know about the outer address family.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: Separate inner/outer mode processing on output

With inter-family transforms the inner mode differs from the outer
mode. Attempting to handle both sides from the same function means
that it

[IPSEC]: Separate inner/outer mode processing on output

With inter-family transforms the inner mode differs from the outer
mode. Attempting to handle both sides from the same function means
that it needs to handle both IPv4 and IPv6 which creates duplication
and confusion.

This patch separates the two parts on the output path so that each
function deals with one family only.

In particular, the functions xfrm4_extract_output/xfrm6_extract_output
moves the pertinent fields from the IPv4/IPv6 IP headers into a
neutral format stored in skb->cb. This is then used by the outer mode
output functions to write the outer IP header. In this way the output
function no longer has to know about the inner address family.

Since the extract functions are only called by tunnel modes (the only
modes that can support inter-family transforms), I've also moved the
xfrm*_tunnel_check_size calls into them. This allows the correct ICMP
message to be sent as opposed to now where you might call icmp_send
with an IPv6 packet and vice versa.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: Store afinfo pointer in xfrm_mode

It is convenient to have a pointer from xfrm_state to address-specific
functions such as the output function for a family. Currently the
address-specific

[IPSEC]: Store afinfo pointer in xfrm_mode

It is convenient to have a pointer from xfrm_state to address-specific
functions such as the output function for a family. Currently the
address-specific policy code calls out to the xfrm state code to get
those pointers when we could get it in an easier way via the state
itself.

This patch adds an xfrm_state_afinfo to xfrm_mode (since they're
address-specific) and changes the policy code to use it. I've also
added an owner field to do reference counting on the module providing
the afinfo even though it isn't strictly necessary today since IPv6
can't be unloaded yet.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: exporting xfrm_state_afinfo

This patch exports xfrm_state_afinfo.

Signed-off-by: Miika Komu <miika@iki.fi>
Signed-off-by: Diego Beltrami <Diego.Beltrami@hiit.fi>
Signed-off-by: Kazunori Mi

[IPSEC]: exporting xfrm_state_afinfo

This patch exports xfrm_state_afinfo.

Signed-off-by: Miika Komu <miika@iki.fi>
Signed-off-by: Diego Beltrami <Diego.Beltrami@hiit.fi>
Signed-off-by: Kazunori Miyazawa <miyazawa@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[XFRM]: ports in struct xfrm_selector annotated

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Fix wildcard as tunnel source

Hashing SAs by source address breaks templates with wildcards as tunnel
source since the source address used for hashing/lookup is still 0/0.
Move source addres

[XFRM]: Fix wildcard as tunnel source

Hashing SAs by source address breaks templates with wildcards as tunnel
source since the source address used for hashing/lookup is still 0/0.
Move source address lookup to xfrm_tmpl_resolve_one() so we can use the
real address in the lookup.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[XFRM]: Pull xfrm_state_by{spi,src} hash table knowledge out of afinfo.

Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM]: Pull xfrm_state_bydst hash table knowledge out of afinfo.

Signed-off-by: David S. Miller <davem@davemloft.net>

[XFRM] STATE: Search by address using source address list.

This is a support to search transformation states by its addresses
by using source address list for Mobile IPv6 usage.
To use it from user-

[XFRM] STATE: Search by address using source address list.

This is a support to search transformation states by its addresses
by using source address list for Mobile IPv6 usage.
To use it from user-space, it is also added a message type for
source address as a xfrm state option.
Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[XFRM] STATE: Add source address list.

Support source address based searching.
Mobile IPv6 will use it.
Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-o

[XFRM] STATE: Add source address list.

Support source address based searching.
Mobile IPv6 will use it.
Based on MIPL2 kernel patch.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[XFRM]: Add XFRM_MODE_xxx for future use.

Transformation mode is used as either IPsec transport or tunnel.
It is required to add two more items, route optimization and inbound trigger
for Mobile IPv

[XFRM]: Add XFRM_MODE_xxx for future use.

Transformation mode is used as either IPsec transport or tunnel.
It is required to add two more items, route optimization and inbound trigger
for Mobile IPv6.
Based on MIPL2 kernel patch.

This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi>

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC] xfrm: Undo afinfo lock proliferation

The number of locks used to manage afinfo structures can easily be reduced
down to one each for policy and state respectively. This is based on the
obse

[IPSEC] xfrm: Undo afinfo lock proliferation

The number of locks used to manage afinfo structures can easily be reduced
down to one each for policy and state respectively. This is based on the
observation that the write locks are only held by module insertion/removal
which are very rare events so there is no need to further differentiate
between the insertion of modules like ipv6 versus esp6.

The removal of the read locks in xfrm4_policy.c/xfrm6_policy.c might look
suspicious at first. However, after you realise that nobody ever takes
the corresponding write lock you'll feel better :)

As far as I can gather it's an attempt to guard against the removal of
the corresponding modules. Since neither module can be unloaded at all
we can leave it to whoever fixes up IPv6 unloading :)

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[XFRM]: IPsec tunnel wildcard address support

When the source address of a tunnel is given as 0.0.0.0 do a routing lookup
to get the real source address for the destination and fill that into the
ac

[XFRM]: IPsec tunnel wildcard address support

When the source address of a tunnel is given as 0.0.0.0 do a routing lookup
to get the real source address for the destination and fill that into the
acquire message. This allows to specify policies like this:

spdadd 172.16.128.13/32 172.16.0.0/20 any -P out ipsec
esp/tunnel/0.0.0.0-x.x.x.x/require;
spdadd 172.16.0.0/20 172.16.128.13/32 any -P in ipsec
esp/tunnel/x.x.x.x-0.0.0.0/require;

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPV4]: possible cleanups

This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 the following unused global function:
- xfrm4_state.c: xfrm4_state_fini

[IPV4]: possible cleanups

This patch contains the following possible cleanups:
- make needlessly global code static
- #if 0 the following unused global function:
- xfrm4_state.c: xfrm4_state_fini
- remove the following unneeded EXPORT_SYMBOL's:
- ip_output.c: ip_finish_output
- ip_output.c: sysctl_ip_default_ttl
- fib_frontend.c: ip_dev_find
- inetpeer.c: inet_peer_idlock
- ip_options.c: ip_options_compile
- ip_options.c: ip_options_undo
- net/core/request_sock.c: sysctl_max_syn_backlog

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[IPSEC]: Add XFRM_STATE_NOPMTUDISC flag

This patch adds the flag XFRM_STATE_NOPMTUDISC for xfrm states. It is
similar to the nopmtudisc on IPIP/GRE tunnels. It only has an effect
on IPv4 tunnel mo

[IPSEC]: Add XFRM_STATE_NOPMTUDISC flag

This patch adds the flag XFRM_STATE_NOPMTUDISC for xfrm states. It is
similar to the nopmtudisc on IPIP/GRE tunnels. It only has an effect
on IPv4 tunnel mode states. For these states, it will ensure that the
DF flag is always cleared.

This is primarily useful to work around ICMP blackholes.

In future this flag could also allow a larger MTU to be set within the
tunnel just like IPIP/GRE tunnels. This could be useful for short haul
tunnels where temporary fragmentation outside the tunnel is desired over
smaller fragments inside the tunnel.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jmorris@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in

Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

show more ...

xfrm: remove output_finish indirection from xfrm_state_afinfo

There are only two implementaions, one for ipv4 and one for ipv6.

Both are almost identical, they clear skb->cb[], set

xfrm: remove output_finish indirection from xfrm_state_afinfo

There are only two implementaions, one for ipv4 and one for ipv6.

Both are almost identical, they clear skb->cb[], set the TRANSFORMED flag
in IP(6)CB and then call the common xfrm_output() function.

By placing the IPCB handling into the common function, we avoid the need
for the output_finish indirection as the output functions can simply
use xfrm_output().

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

show more ...

xfrm: move xfrm4_extract_header to common helper

The function only initializes the XFRM CB in the skb.

After previous patch xfrm4_extract_header is only called from
net/xfrm/xfr

xfrm: move xfrm4_extract_header to common helper

The function only initializes the XFRM CB in the skb.

After previous patch xfrm4_extract_header is only called from
net/xfrm/xfrm_{input,output}.c.

Because of IPV6=m linker errors the ipv6 equivalent
(xfrm6_extract_header) was already placed in xfrm_inout.h because
we can't call functions residing in a module from the core.

So do the same for the ipv4 helper and place it next to the ipv6 one.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

show more ...

xfrm: state: remove extract_input indirection from xfrm_state_afinfo

In order to keep CONFIG_IPV6=m working, xfrm6_extract_header needs to be
duplicated. It will be removed again in a f

xfrm: state: remove extract_input indirection from xfrm_state_afinfo

In order to keep CONFIG_IPV6=m working, xfrm6_extract_header needs to be
duplicated. It will be removed again in a followup change when the
remaining caller is moved to net/xfrm as well.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

show more ...

xfrm: avoid extract_output indirection for ipv4

We can use a direct call for ipv4, so move the needed functions
to net/xfrm/xfrm_output.c and call them directly.

For ipv6 the in

xfrm: avoid extract_output indirection for ipv4

We can use a direct call for ipv4, so move the needed functions
to net/xfrm/xfrm_output.c and call them directly.

For ipv6 the indirection can be avoided as well but it will need
a bit more work -- to ease review it will be done in another patch.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

show more ...