dccp: Integrate the TFRC library with DCCP

This patch integrates the TFRC library, which is a dependency of CCID-3 (and
CCID-4), with the new use of CCIDs in the DCCP module.

Si

dccp: Integrate the TFRC library with DCCP

This patch integrates the TFRC library, which is a dependency of CCID-3 (and
CCID-4), with the new use of CCIDs in the DCCP module.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

dccp: Lockless integration of CCID congestion-control plugins

Based on Arnaldo's earlier patch, this patch integrates the standardised
CCID congestion control plugins (CCID-2 and CCID-3)

dccp: Lockless integration of CCID congestion-control plugins

Based on Arnaldo's earlier patch, this patch integrates the standardised
CCID congestion control plugins (CCID-2 and CCID-3) of DCCP with dccp.ko:

* enables a faster connection path by eliminating the need to always go
through the CCID registration lock;

* updates the implementation to use only a single array whose size equals
the number of configured CCIDs instead of the maximum (256);

* since the CCIDs are now fixed array elements, synchronization is no
longer needed, simplifying use and implementation.

CCID-2 is suggested as minimum for a basic DCCP implementation (RFC 4340, 10);
CCID-3 is a standards-track CCID supported by RFC 4342 and RFC 5348.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[DCCPv6]: Resolve conditional build problem

Resolves the problem that if IPv6 was configured `y' and DCCP `m' then
dccp_ipv6 was not built as a module. With this change, dccp_ipv6 is bui

[DCCPv6]: Resolve conditional build problem

Resolves the problem that if IPv6 was configured `y' and DCCP `m' then
dccp_ipv6 was not built as a module. With this change, dccp_ipv6 is built
as a module whenever DCCP *OR* IPv6 are configured as modules; it will be
built-in only if both DCCP = `y' and IPV6 = `y'.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

show more ...

[DCCP]: Introduce dccp_probe

This adds DCCP probing shamelessly ripped off from TCP probes by Stephen
Hemminger.

I've put in here support for further CCID3 variables as well.

[DCCP]: Introduce dccp_probe

This adds DCCP probing shamelessly ripped off from TCP probes by Stephen
Hemminger.

I've put in here support for further CCID3 variables as well.
Andrea/Arnaldo might look to extend for CCID2.

Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

show more ...

[DCCP]: Move the IPv4 specific bits from proto.c to ipv4.c

With this patch in place we can break down the complexity by better
compartmentalizing the code that is common to ipv6 and ipv4

[DCCP]: Move the IPv4 specific bits from proto.c to ipv4.c

With this patch in place we can break down the complexity by better
compartmentalizing the code that is common to ipv6 and ipv4.

Now we have these modules:
Module Size Used by
dccp_diag 1344 0
inet_diag 9448 1 dccp_diag
dccp_ccid3 15856 0
dccp_tfrc_lib 12320 1 dccp_ccid3
dccp_ccid2 5764 0
dccp_ipv4 16996 2
dccp 48208 4 dccp_diag,dccp_ccid3,dccp_ccid2,dccp_ipv4

dccp_ipv6 still requires dccp_ipv4 due to dccp_ipv6_mapped, that is
the next target to work on the "hey, ipv4 is legacy, I only want ipv6
dude!" direction.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[DCCP] feat: Introduce sysctls for the default features

[root@qemu ~]# for a in /proc/sys/net/dccp/default/* ; do echo $a ; cat $a ; done
/proc/sys/net/dccp/default/ack_ratio
2
/

[DCCP] feat: Introduce sysctls for the default features

[root@qemu ~]# for a in /proc/sys/net/dccp/default/* ; do echo $a ; cat $a ; done
/proc/sys/net/dccp/default/ack_ratio
2
/proc/sys/net/dccp/default/rx_ccid
3
/proc/sys/net/dccp/default/send_ackvec
1
/proc/sys/net/dccp/default/send_ndp
1
/proc/sys/net/dccp/default/seq_window
100
/proc/sys/net/dccp/default/tx_ccid
3
[root@qemu ~]#

So if wanting to test ccid3 as the tx CCID one can just do:

[root@qemu ~]# echo 3 > /proc/sys/net/dccp/default/tx_ccid
[root@qemu ~]# echo 2 > /proc/sys/net/dccp/default/rx_ccid
[root@qemu ~]# cat /proc/sys/net/dccp/default/[tr]x_ccid
2
3
[root@qemu ~]#

Of course we also need the setsockopt for each app to tell its preferences, but
for testing or defining something other than CCID2 as the default for apps that
don't explicitely set their preference the sysctl interface is handy.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[DCCP]: Initial feature negotiation implementation

Still needs more work, but boots and doesn't crashes, even
does some negotiation!

18:38:52.174934 127.0.0.1.43458 > 127.0.0.1

[DCCP]: Initial feature negotiation implementation

Still needs more work, but boots and doesn't crashes, even
does some negotiation!

18:38:52.174934 127.0.0.1.43458 > 127.0.0.1.5001: request <change_l ack_ratio 2, change_r ccid 2, change_l ccid 2>
18:38:52.218526 127.0.0.1.5001 > 127.0.0.1.43458: response <nop, nop, change_l ack_ratio 2, confirm_r ccid 2 2, confirm_l ccid 2 2, confirm_r ack_ratio 2>
18:38:52.185398 127.0.0.1.43458 > 127.0.0.1.5001: <nop, confirm_r ack_ratio 2, ack_vector0 0x00, elapsed_time 212>

:-)

Signed-off-by: Andrea Bittau <a.bittau@cs.ucl.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[DCCP]: Introduce DCCPv6

Still needs mucho polishing, specially in the checksum code, but works
just fine, inet_diag/iproute2 and all 8)

Signed-off-by: Arnaldo Carvalho de Melo

[DCCP]: Introduce DCCPv6

Still needs mucho polishing, specially in the checksum code, but works
just fine, inet_diag/iproute2 and all 8)

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[DCCP]: Move the ack vector code to net/dccp/ackvec.[ch]

Isolating it, that will be used when we introduce a CCID2 (TCP-Like)
implementation.

Signed-off-by: Arnaldo Carvalho de

[DCCP]: Move the ack vector code to net/dccp/ackvec.[ch]

Isolating it, that will be used when we introduce a CCID2 (TCP-Like)
implementation.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[DCCP]: Just move packet_history.[ch] to net/dccp/ccids/lib/

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[INET_DIAG]: Move the tcp_diag interface to the proper place

With this the previous setup is back, i.e. tcp_diag can be built as a module,
as dccp_diag and both share the infrastructure

[INET_DIAG]: Move the tcp_diag interface to the proper place

With this the previous setup is back, i.e. tcp_diag can be built as a module,
as dccp_diag and both share the infrastructure available in inet_diag.

If one selects CONFIG_INET_DIAG as module CONFIG_INET_TCP_DIAG will also be
built as a module, as will CONFIG_INET_DCCP_DIAG, if CONFIG_IP_DCCP was
selected static or as a module, if CONFIG_INET_DIAG is y, being statically
linked CONFIG_INET_TCP_DIAG will follow suit and CONFIG_INET_DCCP_DIAG will be
built in the same manner as CONFIG_IP_DCCP.

Now to aim at UDP, converting it to use inet_hashinfo, so that we can use
iproute2 for UDP sockets as well.

Ah, just to show an example of this new infrastructure working for DCCP :-)

[root@qemu ~]# ./ss -dane
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 0 *:5001 *:* ino:942 sk:cfd503a0
ESTAB 0 0 127.0.0.1:5001 127.0.0.1:32770 ino:943 sk:cfd50a60
ESTAB 0 0 127.0.0.1:32770 127.0.0.1:5001 ino:947 sk:cfd50700
TIME-WAIT 0 0 127.0.0.1:32769 127.0.0.1:5001 timer:(timewait,3.430ms,0) ino:0 sk:cf209620

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[TCPDIAG]: Introduce inet_diag_{register,unregister}

Next changeset will rename tcp_diag to inet_diag and move the tcp_diag code out
of it and into a new tcp_diag.c, similar to the net/d

[TCPDIAG]: Introduce inet_diag_{register,unregister}

Next changeset will rename tcp_diag to inet_diag and move the tcp_diag code out
of it and into a new tcp_diag.c, similar to the net/dccp/diag.c introduced in
this changeset, completing the transition to a generic inet_diag
infrastructure.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

[CCID3]: Separate most of the packet history code

This also changes the list_for_each_entry_safe_continue behaviour to match its
kerneldoc comment, that is, to start after the pos passed

[CCID3]: Separate most of the packet history code

This also changes the list_for_each_entry_safe_continue behaviour to match its
kerneldoc comment, that is, to start after the pos passed.

Also adds several helper functions from previously open coded fragments, making
the code more clear.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>

show more ...

[DCCP]: Initial implementation

Development to this point was done on a subversion repository at:

http://oops.ghostprotocols.net:81/cgi-bin/viewcvs.cgi/dccp-2.6/

This reposi

[DCCP]: Initial implementation

Development to this point was done on a subversion repository at:

http://oops.ghostprotocols.net:81/cgi-bin/viewcvs.cgi/dccp-2.6/

This repository will be kept at this site for the foreseable future,
so that interested parties can see the history of this code,
attributions, etc.

If I ever decide to take this offline I'll provide the full history at
some other suitable place.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...