[media] cec: add CEC_CAP_NEEDS_HPD

Add a new capability CEC_CAP_NEEDS_HPD. If this capability is set
then the hardware can only use CEC if the HDMI Hotplug Detect pin
is high. Such h

[media] cec: add CEC_CAP_NEEDS_HPD

Add a new capability CEC_CAP_NEEDS_HPD. If this capability is set
then the hardware can only use CEC if the HDMI Hotplug Detect pin
is high. Such hardware cannot handle the corner case in the CEC specification
where it is possible to transmit messages even if no hotplug signal is
present (needed for some displays that turn off the HPD when in standby,
but still have CEC enabled).

Typically hardware that needs this capability have the HPD wired to the CEC
block, often to a 'power' or 'active' pin.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: add cec_transmit_attempt_done helper function

A simpler variant of cec_transmit_done to be used where the HW does
just a single attempt at a transmit. So if the status indic

[media] cec: add cec_transmit_attempt_done helper function

A simpler variant of cec_transmit_done to be used where the HW does
just a single attempt at a transmit. So if the status indicates an
error, then the corresponding error count will always be 1 and this
function figures that out based on the status argument.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: add cec_phys_addr_invalidate() helper function

Simplifies setting the physical address to CEC_PHYS_ADDR_INVALID.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

[media] cec: add cec_phys_addr_invalidate() helper function

Simplifies setting the physical address to CEC_PHYS_ADDR_INVALID.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: add cec_s_phys_addr_from_edid helper function

This function simplifies the integration of CEC in DRM drivers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
S

[media] cec: add cec_s_phys_addr_from_edid helper function

This function simplifies the integration of CEC in DRM drivers.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED

Fix messages like this:

adv7842.c:(.text+0x2edadd): undefined reference to `cec_unregister_adapter'

when CEC_COR

[media] media/cec.h: use IS_REACHABLE instead of IS_ENABLED

Fix messages like this:

adv7842.c:(.text+0x2edadd): undefined reference to `cec_unregister_adapter'

when CEC_CORE=m but the driver including media/cec.h is built-in. In that case
the static inlines provided in media/cec.h should be used by that driver.

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER

This config option is strictly speaking independent of the
media subsystem since it can be used by drm as well.

Besides, i

[media] cec: rename MEDIA_CEC_NOTIFIER to CEC_NOTIFIER

This config option is strictly speaking independent of the
media subsystem since it can be used by drm as well.

Besides, it looks odd when drivers select CEC_CORE and
MEDIA_CEC_NOTIFIER, that's inconsistent naming.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec.h: merge cec-edid.h into cec.h

Drop the separate cec-edid.h header and merge it into cec.h.

There was really no need to have a separate header for this.

Signed-

[media] cec.h: merge cec-edid.h into cec.h

Drop the separate cec-edid.h header and merge it into cec.h.

There was really no need to have a separate header for this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: Kconfig cleanup

The Kconfig options for the CEC subsystem were a bit messy. In
addition there were two cec sources (cec-edid.c and cec-notifier.c)
that were outside of t

[media] cec: Kconfig cleanup

The Kconfig options for the CEC subsystem were a bit messy. In
addition there were two cec sources (cec-edid.c and cec-notifier.c)
that were outside of the media/cec directory, which was weird.

Move those sources to media/cec as well.

The cec-edid and cec-notifier functionality is now part of the cec
module and these are no longer separate modules.

Also remove the MEDIA_CEC_EDID config option and include it with the
main CEC config option (which defined CEC_EDID anyway).

Added static inlines to cec-edid.h for dummy functions when CEC_CORE
isn't defined.

CEC drivers should now depend on CEC_CORE.

CEC drivers that need the cec-notifier functionality must explicitly
select CEC_NOTIFIER.

The s5p-cec and stih-cec drivers depended on VIDEO_DEV instead of
CEC_CORE, fix that as well.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: integrate CEC notifier support

Support the CEC notifier framework, simplifying drivers that
depend on this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>

[media] cec: integrate CEC notifier support

Support the CEC notifier framework, simplifying drivers that
depend on this.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: Add cec_get_drvdata()

Add a helper function to get driver private data from CEC
adapter. This helps the readability a little bit and allows
to change the 'priv' field na

[media] cec: Add cec_get_drvdata()

Add a helper function to get driver private data from CEC
adapter. This helps the readability a little bit and allows
to change the 'priv' field name to something else without
needing to touch all drivers.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: pass parent device in register(), not allocate()

The cec_allocate_adapter function doesn't need the parent device, only the
cec_register_adapter function needs it.

[media] cec: pass parent device in register(), not allocate()

The cec_allocate_adapter function doesn't need the parent device, only the
cec_register_adapter function needs it.

Drop the cec_devnode parent field, since devnode.dev.parent can be used
instead.

This change makes the framework consistent with other frameworks where the
parent device is not used until the device is registered.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: move the CEC framework out of staging and to media

The last open issues have been addressed, so it is time to move
this out of staging and into the mainline and to move the

[media] cec: move the CEC framework out of staging and to media

The last open issues have been addressed, so it is time to move
this out of staging and into the mainline and to move the public
cec headers to include/uapi/linux.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: rename cec_devnode fhs_lock to just lock

This lock will be used to protect more than just the fhs list.
So rename it to just 'lock'.

Signed-off-by: Hans Verkuil <ha

[media] cec: rename cec_devnode fhs_lock to just lock

This lock will be used to protect more than just the fhs list.
So rename it to just 'lock'.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: limit the size of the transmit queue

The size of the transmit queue was unlimited, which meant that
in non-blocking mode you could flood the CEC adapter with messages
to

[media] cec: limit the size of the transmit queue

The size of the transmit queue was unlimited, which meant that
in non-blocking mode you could flood the CEC adapter with messages
to be transmitted.

Limit this to 18 messages.

Also print the number of pending transmits and the timeout value
in the status debugfs file.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...

[media] cec: add HDMI CEC framework (core)

The added HDMI CEC framework provides a generic kernel interface for
HDMI CEC devices.

Note that the CEC framework is added to staging

[media] cec: add HDMI CEC framework (core)

The added HDMI CEC framework provides a generic kernel interface for
HDMI CEC devices.

Note that the CEC framework is added to staging/media and that the
cec.h and cec-funcs.h headers are not exported yet. While the kABI
is mature, I would prefer to allow the uABI some more time before
it is mainlined in case it needs more tweaks.

This adds the cec-core.c, media/cec.h and cec-priv.h sources.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[k.debski@samsung.com: Merged CEC Updates commit by Hans Verkuil]
[k.debski@samsung.com: Merged Update author commit by Hans Verkuil]
[k.debski@samsung.com: code cleanup and fixes]
[k.debski@samsung.com: add missing CEC commands to match spec]
[k.debski@samsung.com: add RC framework support]
[k.debski@samsung.com: move and edit documentation]
[k.debski@samsung.com: add vendor id reporting]
[k.debski@samsung.com: reorder of API structs and add reserved fields]
[k.debski@samsung.com: fix handling of events and fix 32/64bit timespec problem]
[k.debski@samsung.com: add sequence number handling]
[k.debski@samsung.com: add passthrough mode]
[k.debski@samsung.com: fix CEC defines, add missing CEC 2.0 commands]
Signed-off-by: Kamil Debski <kamil@wypas.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

show more ...