ovl: allocate anon bdev per unique lower fs

Instead of allocating an anonymous bdev per lower layer, allocate
one anonymous bdev per every unique lower fs that is different than
uppe

ovl: allocate anon bdev per unique lower fs

Instead of allocating an anonymous bdev per lower layer, allocate
one anonymous bdev per every unique lower fs that is different than
upper fs.

Every unique lower fs is assigned an fsid > 0 and the number of
unique lower fs are stored in ofs->numlowerfs.

The assigned fsid is stored in the lower layer struct and will be
used also for inode number multiplexing.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: factor out ovl_map_dev_ino() helper

A helper for ovl_getattr() to map the values of st_dev and st_ino
according to constant st_ino rules.

Signed-off-by: Amir Goldstein <ami

ovl: factor out ovl_map_dev_ino() helper

A helper for ovl_getattr() to map the values of st_dev and st_ino
according to constant st_ino rules.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: set i_ino to the value of st_ino for NFS export

Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN

ovl: set i_ino to the value of st_ino for NFS export

Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN.
The reason is that while preparing the response for readdirplus, nfsd
checks inside encode_entryplus_baggage() that a child dentry's inode
number matches the value of d_ino returns by overlayfs readdir iterator.

Because the overlayfs inodes use arbitrary inode numbers that are not
correlated with the values of st_ino/d_ino, NFSv3 falls back to not
encoding d_type. Although this is an allowed behavior, we can fix it for
the case of all overlayfs layers on the same underlying filesystem.

When NFS export is enabled and d_ino is consistent with st_ino
(samefs), set the same value also to i_ino in ovl_fill_inode() for all
overlayfs inodes, nfsd readdirplus sanity checks will pass.
ovl_fill_inode() may be called from ovl_new_inode(), before real inode
was created with ino arg 0. In that case, i_ino will be updated to real
upper inode i_ino on ovl_inode_init() or ovl_inode_update().

Reported-by: Eddie Horng <eddiehorng.tw@gmail.com>
Tested-by: Eddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Fixes: 8383f1748829 ("ovl: wire up NFS export operations")
Cc: <stable@vger.kernel.org> #v4.16
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: store 'has_upper' and 'opaque' as bit flags

We need to make some room in struct ovl_entry to store information
about redirected ancestors for NFS export, so cram two booleans as

ovl: store 'has_upper' and 'opaque' as bit flags

We need to make some room in struct ovl_entry to store information
about redirected ancestors for NFS export, so cram two booleans as
bit flags.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: copy up of disconnected dentries

With NFS export, some operations on decoded file handles (e.g. open,
link, setattr, xattr_set) may call copy up with a disconnected non-dir.
In

ovl: copy up of disconnected dentries

With NFS export, some operations on decoded file handles (e.g. open,
link, setattr, xattr_set) may call copy up with a disconnected non-dir.
In this case, we will copy up lower inode to index dir without
linking it to upper dir.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: whiteout index when union nlink drops to zero

With NFS export feature enabled, when overlay inode nlink drops to
zero, instead of removing the index entry, replace it with a whiteou

ovl: whiteout index when union nlink drops to zero

With NFS export feature enabled, when overlay inode nlink drops to
zero, instead of removing the index entry, replace it with a whiteout
index entry.

This is needed for NFS export in order to prevent future open by handle
from opening the lower file directly.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: cleanup dir index when dir nlink drops to zero

When non-dir index union nlink drops to zero the non-dir index
is cleaned. Do the same for directory type index entries when
union

ovl: cleanup dir index when dir nlink drops to zero

When non-dir index union nlink drops to zero the non-dir index
is cleaned. Do the same for directory type index entries when
union directory is removed.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: index directories on copy up for NFS export

With the NFS export feature enabled, all dirs are indexed on copy up.
Non-dir files are copied up directly to indexdir and then hardlinke

ovl: index directories on copy up for NFS export

With the NFS export feature enabled, all dirs are indexed on copy up.
Non-dir files are copied up directly to indexdir and then hardlinked
to upper dir.

Directories are copied up to indexdir, then an index entry is created
in indexdir with 'upper' xattr pointing to the copied up dir and then
the copied up dir is moved to upper dir.

Directory index is also used for consistency verification, like
detecting multiple redirected dirs to the same lower dir on lookup.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: index all non-dir on copy up for NFS export

With the NFS export feature enabled, all non-dir are indexed on copy up.
The copy up origin inode of an indexed non-dir can be used as a

ovl: index all non-dir on copy up for NFS export

With the NFS export feature enabled, all non-dir are indexed on copy up.
The copy up origin inode of an indexed non-dir can be used as a unique
identifier of the overlay object.

The full index is also used for consistency verfication, like detecting
multiple non-hardlink uppers with the same 'origin' on lookup.

Directory index on copy up will be implemented by following patch.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: create ovl_need_index() helper

The helper determines which lower file needs to be indexed
on copy up and before nlink changes.

For index=on, the helper evaluates to true fo

ovl: create ovl_need_index() helper

The helper determines which lower file needs to be indexed
on copy up and before nlink changes.

For index=on, the helper evaluates to true for lower hardlinks.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: add support for "nfs_export" configuration

Introduce the "nfs_export" config, module and mount options.

The NFS export feature depends on the "index" feature and enables two

ovl: add support for "nfs_export" configuration

Introduce the "nfs_export" config, module and mount options.

The NFS export feature depends on the "index" feature and enables two
implicit overlayfs features: "index_all" and "verify_lower".
The "index_all" feature creates an index on copy up of every file and
directory. The "verify_lower" feature uses the full index to detect
overlay filesystems inconsistencies on lookup, like redirect from
multiple upper dirs to the same lower dir.

NFS export can be enabled for non-upper mount with no index. However,
because lower layer redirects cannot be verified with the index, enabling
NFS export support on an overlay with no upper layer requires turning off
redirect follow (e.g. "redirect_dir=nofollow").

The full index may incur some overhead on mount time, especially when
verifying that lower directory file handles are not stale.

NFS export support, full index and consistency verification will be
implemented by following patches.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: hash directory inodes for fsnotify

fsnotify pins a watched directory inode in cache, but if directory dentry
is released, new lookup will allocate a new dentry and a new inode.

ovl: hash directory inodes for fsnotify

fsnotify pins a watched directory inode in cache, but if directory dentry
is released, new lookup will allocate a new dentry and a new inode.
Directory events will be notified on the new inode, while fsnotify listener
is watching the old pinned inode.

Hash all directory inodes to reuse the pinned inode on lookup. Pure upper
dirs are hashes by real upper inode, merge and lower dirs are hashed by
real lower inode.

The reference to lower inode was being held by the lower dentry object
in the overlay dentry (oe->lowerstack[0]). Releasing the overlay dentry
may drop lower inode refcount to zero. Add a refcount on behalf of the
overlay inode to prevent that.

As a by-product, hashing directory inodes also detects multiple
redirected dirs to the same lower dir and uncovered redirected dir
target on and returns -ESTALE on lookup.

The reported issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.

Cc: <stable@vger.kernel.org> #v4.13
Reported-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>

show more ...

ovl: re-structure overlay lower layers in-memory

Define new structures to represent overlay instance lower layers and
overlay merge dir lower layers to make room for storing more per lay

ovl: re-structure overlay lower layers in-memory

Define new structures to represent overlay instance lower layers and
overlay merge dir lower layers to make room for storing more per layer
information in-memory.

Instead of keeping the fs instance lower layers in an array of struct
vfsmount, keep them in an array of new struct ovl_layer, that has a
pointer to struct vfsmount.

Instead of keeping the dentry lower layers in an array of struct path,
keep them in an array of new struct ovl_path, that has a pointer to
struct dentry and to struct ovl_layer.

Add a small helper to find the fs layer id that correspopnds to a lower
struct ovl_path and use it in ovl_lookup().

[amir: split re-structure from anonymous bdev patch]

Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: move include of ovl_entry.h into overlayfs.h

Most overlayfs c files already explicitly include ovl_entry.h
to use overlay entry struct definitions and upcoming changes
are going

ovl: move include of ovl_entry.h into overlayfs.h

Most overlayfs c files already explicitly include ovl_entry.h
to use overlay entry struct definitions and upcoming changes
are going to require even more c files to include this header.

All overlayfs c files include overlayfs.h and overlayfs.h itself
refers to some structs defined in ovl_entry.h, so it seems more
logic to include ovl_entry.h from overlayfs.h than from c files.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: no direct iteration for dir with origin xattr

If a non-merge dir in an overlay mount has an overlay.origin xattr, it
means it was once an upper merge dir, which may contain whiteout

ovl: no direct iteration for dir with origin xattr

If a non-merge dir in an overlay mount has an overlay.origin xattr, it
means it was once an upper merge dir, which may contain whiteouts and
then the lower dir was removed under it.

Do not iterate real dir directly in this case to avoid exposing whiteouts.

[SzM] Set OVL_WHITEOUT for all merge directories as well.

[amir] A directory that was just copied up does not have the OVL_WHITEOUTS
flag. We need to set it to fix merge dir iteration.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: fix missing unlock_rename() in ovl_do_copy_up()

Use the ovl_lock_rename_workdir() helper which requires
unlock_rename() only on lock success.

Fixes: ("fd210b7d67ee ovl: mov

ovl: fix missing unlock_rename() in ovl_do_copy_up()

Use the ovl_lock_rename_workdir() helper which requires
unlock_rename() only on lock success.

Fixes: ("fd210b7d67ee ovl: move copy up lock out")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: fix dput() of ERR_PTR in ovl_cleanup_index()

Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73

ovl: fix dput() of ERR_PTR in ovl_cleanup_index()

Fixes: caf70cb2ba5d ("ovl: cleanup orphan index entries")
Cc: <stable@vger.kernel.org> # v4.13
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: constant d_ino for non-merge dirs

Impure directories are ones which contain objects with origins (i.e. those
that have been copied up). These are relevant to readdir operation only

ovl: constant d_ino for non-merge dirs

Impure directories are ones which contain objects with origins (i.e. those
that have been copied up). These are relevant to readdir operation only
because of the d_ino field, no other transformation is necessary. Also a
directory can become impure between two getdents(2) calls.

This patch creates a cache for impure directories. Unlike the cache for
merged directories, this one only contains entries with origin and is not
refcounted but has a its lifetime tied to that of the dentry.

Similarly to the merged cache, the impure cache is invalidated based on a
version number. This version number is incremented when an entry with
origin is added or removed from the directory.

If the cache is empty, then the impure xattr is removed from the directory.

This patch also fixes up handling of d_ino for the ".." entry if the parent
directory is merged.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: fix xattr get and set with selinux

inode_doinit_with_dentry() in SELinux wants to read the upper inode's xattr
to get security label, and ovl_xattr_get() calls ovl_dentry_real(), wh

ovl: fix xattr get and set with selinux

inode_doinit_with_dentry() in SELinux wants to read the upper inode's xattr
to get security label, and ovl_xattr_get() calls ovl_dentry_real(), which
depends on dentry->d_inode, but d_inode is null and not initialized yet at
this point resulting in an Oops.

Fix by getting the upperdentry info from the inode directly in this case.

Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: 09d8b586731b ("ovl: move __upperdentry to ovl_inode")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: cleanup orphan index entries

index entry should live only as long as there are upper or lower
hardlinks.

Cleanup orphan index entries on mount and when dropping the last

ovl: cleanup orphan index entries

index entry should live only as long as there are upper or lower
hardlinks.

Cleanup orphan index entries on mount and when dropping the last
overlay inode nlink.

When about to cleanup or link up to orphan index and the index inode
nlink > 1, admit that something went wrong and adjust overlay nlink
to index inode nlink - 1 to prevent it from dropping below zero.
This could happen when adding lower hardlinks underneath a mounted
overlay and then trying to unlink them.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: persistent overlay inode nlink for indexed inodes

With inodes index enabled, an overlay inode nlink counts the union of upper
and non-covered lower hardlinks. During the lifetime of

ovl: persistent overlay inode nlink for indexed inodes

With inodes index enabled, an overlay inode nlink counts the union of upper
and non-covered lower hardlinks. During the lifetime of a non-pure upper
inode, the following nlink modifying operations can happen:

1. Lower hardlink copy up
2. Upper hardlink created, unlinked or renamed over
3. Lower hardlink whiteout or renamed over

For the first, copy up case, the union nlink does not change, whether the
operation succeeds or fails, but the upper inode nlink may change.
Therefore, before copy up, we store the union nlink value relative to the
lower inode nlink in the index inode xattr trusted.overlay.nlink.

For the second, upper hardlink case, the union nlink should be incremented
or decremented IFF the operation succeeds, aligned with nlink change of the
upper inode. Therefore, before link/unlink/rename, we store the union nlink
value relative to the upper inode nlink in the index inode.

For the last, lower cover up case, we simplify things by preceding the
whiteout or cover up with copy up. This makes sure that there is an index
upper inode where the nlink xattr can be stored before the copied up upper
entry is unlink.

Return the overlay inode nlinks for indexed upper inodes on stat(2).

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: implement index dir copy up

Implement a copy up method for non-dir objects using index dir to
prevent breaking lower hardlinks on copy up.

This method requires that the ino

ovl: implement index dir copy up

Implement a copy up method for non-dir objects using index dir to
prevent breaking lower hardlinks on copy up.

This method requires that the inodes index dir feature was enabled and
that all underlying fs support file handle encoding/decoding.

On the first lower hardlink copy up, upper file is created in index dir,
named after the hex representation of the lower origin inode file handle.
On the second lower hardlink copy up, upper file is found in index dir,
by the same lower handle key.
On either case, the upper indexed inode is then linked to the copy up
upper path.

The index entry remains linked for future lower hardlink copy up and for
lower to upper inode map, that is needed for exporting overlayfs to NFS.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: add flag for upper in ovl_entry

For rename, we need to ensure that an upper alias exists for hard links
before attempting the operation. Introduce a flag in ovl_entry to track

ovl: add flag for upper in ovl_entry

For rename, we need to ensure that an upper alias exists for hard links
before attempting the operation. Introduce a flag in ovl_entry to track
the state of the upper alias.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: defer upper dir lock to tempfile link

On copy up of regular file using an O_TMPFILE, lock upper dir only
before linking the tempfile in place.

Signed-off-by: Amir Goldstein

ovl: defer upper dir lock to tempfile link

On copy up of regular file using an O_TMPFILE, lock upper dir only
before linking the tempfile in place.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: hash overlay non-dir inodes by copy up origin

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>