ovl: rearrange ovl_follow_link to it doesn't need to call ->put_link

ovl_follow_link current calls ->put_link on an error path.
However ->put_link is about to change in a way that it will be
impossi

ovl: rearrange ovl_follow_link to it doesn't need to call ->put_link

ovl_follow_link current calls ->put_link on an error path.
However ->put_link is about to change in a way that it will be
impossible to call it from ovl_follow_link.

So rearrange the code to avoid the need for that error path.
Specifically: move the kmalloc() call before the ->follow_link()
call to the subordinate filesystem.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

ovl: Use macros to present ovl_xattr

This patch adds two macros:

OVL_XATTR_PRE_NAME and OVL_XATTR_PRE_LEN

to present ovl_xattr name prefix and its length. Also, a
new macro OVL_XATTR_OPAQUE is int

ovl: Use macros to present ovl_xattr

This patch adds two macros:

OVL_XATTR_PRE_NAME and OVL_XATTR_PRE_LEN

to present ovl_xattr name prefix and its length. Also, a
new macro OVL_XATTR_OPAQUE is introduced to replace old
*ovl_opaque_xattr*.

Fix the length of "trusted.overlay." to *16*.

Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

show more ...

ovl: Cleanup redundant blank lines

This patch removes redundant blanks lines in overlayfs.

Signed-off-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

ovl: make path-type a bitmap

OVL_PATH_PURE_UPPER -> __OVL_PATH_UPPER | __OVL_PATH_PURE
OVL_PATH_UPPER -> __OVL_PATH_UPPER
OVL_PATH_MERGE -> __OVL_PATH_UPPER | __OVL_PATH_MERGE
OVL_PATH_LOW

ovl: make path-type a bitmap

OVL_PATH_PURE_UPPER -> __OVL_PATH_UPPER | __OVL_PATH_PURE
OVL_PATH_UPPER -> __OVL_PATH_UPPER
OVL_PATH_MERGE -> __OVL_PATH_UPPER | __OVL_PATH_MERGE
OVL_PATH_LOWER -> 0

Multiple R/O layers will allow __OVL_PATH_MERGE without __OVL_PATH_UPPER.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

show more ...

ovl: fix race in private xattr checks

Xattr operations can race with copy up. This does not matter as long as
we consistently fiter out "trunsted.overlay.opaque" attribute on upper
directories.

Pr

ovl: fix race in private xattr checks

Xattr operations can race with copy up. This does not matter as long as
we consistently fiter out "trunsted.overlay.opaque" attribute on upper
directories.

Previously we checked parent against OVL_PATH_MERGE. This is too general,
and prone to race with copy-up. I.e. we found the parent to be on the
lower layer but ovl_dentry_real() would return the copied-up dentry,
possibly with the "opaque" attribute.

So instead use ovl_path_real() and decide to filter the attributes based on
the actual type of the dentry we'll use.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

show more ...

overlay filesystem

Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.

This type of m

overlay filesystem

Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.

This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.

The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.

The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.

Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.

Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).

Usage:

mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay

The following cotributions have been folded into this patch:

Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read

Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts

Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON

Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API

Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link

Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode

AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename

Also thanks to the following people for testing and reporting bugs:

Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>

show more ...

ovl: perform vfs_getxattr() with mounter creds

[ Upstream commit 554677b97257b0b69378bd74e521edb7e94769ff ]

The vfs_getxattr() in ovl_xattr_set() is used to check whether an xattr

ovl: perform vfs_getxattr() with mounter creds

[ Upstream commit 554677b97257b0b69378bd74e521edb7e94769ff ]

The vfs_getxattr() in ovl_xattr_set() is used to check whether an xattr
exist on a lower layer file that is to be removed. If the xattr does not
exist, then no need to copy up the file.

This call of vfs_getxattr() wasn't wrapped in credential override, and this
is probably okay. But for consitency wrap this instance as well.

Reported-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

ovl: rearrange ovl_can_list()

ovl_can_list() should return false for overlay private xattrs. Since
currently these use the "trusted.overlay." prefix, they will always match
the "tru

ovl: rearrange ovl_can_list()

ovl_can_list() should return false for overlay private xattrs. Since
currently these use the "trusted.overlay." prefix, they will always match
the "trusted." prefix as well, hence the test for being non-trusted will
not trigger.

Prepare for using the "user.overlay." namespace by moving the test for
private xattr before the test for non-trusted.

This patch doesn't change behavior.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: pass ovl_fs down to functions accessing private xattrs

This paves the way for optionally using the "user.overlay." xattr
namespace.

Signed-off-by: Miklos Szeredi <mszeredi@

ovl: pass ovl_fs down to functions accessing private xattrs

This paves the way for optionally using the "user.overlay." xattr
namespace.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: drop flags argument from ovl_do_setxattr()

All callers pass zero flags to ovl_do_setxattr(). So drop this argument.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

ovl: use ovl_do_getxattr() for private xattr

Use the convention of calling ovl_do_foo() for operations which are overlay
specific.

This patch is a no-op, and will have significa

ovl: use ovl_do_getxattr() for private xattr

Use the convention of calling ovl_do_foo() for operations which are overlay
specific.

This patch is a no-op, and will have significance for supporting
"user.overlay." xattr namespace.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

Merge tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:
"Fixes:

- Resolve mount option conflicts

Merge tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs

Pull overlayfs updates from Miklos Szeredi:
"Fixes:

- Resolve mount option conflicts consistently

- Sync before remount R/O

- Fix file handle encoding corner cases

- Fix metacopy related issues

- Fix an unintialized return value

- Add missing permission checks for underlying layers

Optimizations:

- Allow multipe whiteouts to share an inode

- Optimize small writes by inheriting SB_NOSEC from upper layer

- Do not call ->syncfs() multiple times for sync(2)

- Do not cache negative lookups on upper layer

- Make private internal mounts longterm"

* tag 'ovl-update-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (27 commits)
ovl: remove unnecessary lock check
ovl: make oip->index bool
ovl: only pass ->ki_flags to ovl_iocb_to_rwf()
ovl: make private mounts longterm
ovl: get rid of redundant members in struct ovl_fs
ovl: add accessor for ofs->upper_mnt
ovl: initialize error in ovl_copy_xattr
ovl: drop negative dentry in upper layer
ovl: check permission to open real file
ovl: call secutiry hook in ovl_real_ioctl()
ovl: verify permissions in ovl_path_open()
ovl: switch to mounter creds in readdir
ovl: pass correct flags for opening real directory
ovl: fix redirect traversal on metacopy dentries
ovl: initialize OVL_UPPERDATA in ovl_lookup()
ovl: use only uppermetacopy state in ovl_lookup()
ovl: simplify setting of origin for index lookup
ovl: fix out of bounds access warning in ovl_check_fb_len()
ovl: return required buffer size for file handles
ovl: sync dirty data when remounting to ro mode
...

show more ...

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
"A lot of bug fixes and cleanups for ext4, including:

- Fix performance problems found in dioread_nolock now that it is the
default, caused by transaction leaks.

- Clean up fiemap handling in ext4

- Clean up and refactor multiple block allocator (mballoc) code

- Fix a problem with mballoc with a smaller file systems running out
of blocks because they couldn't properly use blocks that had been
reserved by inode preallocation.

- Fixed a race in ext4_sync_parent() versus rename()

- Simplify the error handling in the extent manipulation code

- Make sure all metadata I/O errors are felected to
ext4_ext_dirty()'s and ext4_make_inode_dirty()'s callers.

- Avoid passing an error pointer to brelse in ext4_xattr_set()

- Fix race which could result to freeing an inode on the dirty last
in data=journal mode.

- Fix refcount handling if ext4_iget() fails

- Fix a crash in generic/019 caused by a corrupted extent node"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (58 commits)
ext4: avoid unnecessary transaction starts during writeback
ext4: don't block for O_DIRECT if IOCB_NOWAIT is set
ext4: remove the access_ok() check in ext4_ioctl_get_es_cache
fs: remove the access_ok() check in ioctl_fiemap
fs: handle FIEMAP_FLAG_SYNC in fiemap_prep
fs: move fiemap range validation into the file systems instances
iomap: fix the iomap_fiemap prototype
fs: move the fiemap definitions out of fs.h
fs: mark __generic_block_fiemap static
ext4: remove the call to fiemap_check_flags in ext4_fiemap
ext4: split _ext4_fiemap
ext4: fix fiemap size checks for bitmap files
ext4: fix EXT4_MAX_LOGICAL_BLOCK macro
add comment for ext4_dir_entry_2 file_type member
jbd2: avoid leaking transaction credits when unreserving handle
ext4: drop ext4_journal_free_reserved()
ext4: mballoc: use lock for checking free blocks while retrying
ext4: mballoc: refactor ext4_mb_good_group()
ext4: mballoc: introduce pcpu seqcnt for freeing PA to improve ENOSPC handling
ext4: mballoc: refactor ext4_mb_discard_preallocations()
...

show more ...

ovl: make oip->index bool

ovl_get_inode() uses oip->index as a bool value, not as a pointer.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

ovl: add accessor for ofs->upper_mnt

Next patch will remove ofs->upper_mnt, so add an accessor function for this
field.

Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fs: handle FIEMAP_FLAG_SYNC in fiemap_prep

By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,

fs: handle FIEMAP_FLAG_SYNC in fiemap_prep

By moving FIEMAP_FLAG_SYNC handling to fiemap_prep we ensure it is
handled once instead of duplicated, but can still be done under fs locks,
like xfs/iomap intended with its duplicate handling. Also make sure the
error value of filemap_write_and_wait is propagated to user space.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-8-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

fs: move the fiemap definitions out of fs.h

No need to pull the fiemap definitions into almost every file in the
kernel build.

Signed-off-by: Christoph Hellwig <hch@lst.de>

fs: move the fiemap definitions out of fs.h

No need to pull the fiemap definitions into almost every file in the
kernel build.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Link: https://lore.kernel.org/r/20200523073016.2944131-5-hch@lst.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

show more ...

ovl: initialize OVL_UPPERDATA in ovl_lookup()

Currently ovl_get_inode() initializes OVL_UPPERDATA flag and for that it
has to call ovl_check_metacopy_xattr() and check if metacopy xattr

ovl: initialize OVL_UPPERDATA in ovl_lookup()

Currently ovl_get_inode() initializes OVL_UPPERDATA flag and for that it
has to call ovl_check_metacopy_xattr() and check if metacopy xattr is
present or not.

yangerkun reported sometimes underlying filesystem might return -EIO and in
that case error handling path does not cleanup properly leading to various
warnings.

Run generic/461 with ext4 upper/lower layer sometimes may trigger the bug
as below(linux 4.19):

[ 551.001349] overlayfs: failed to get metacopy (-5)
[ 551.003464] overlayfs: failed to get inode (-5)
[ 551.004243] overlayfs: cleanup of 'd44/fd51' failed (-5)
[ 551.004941] overlayfs: failed to get origin (-5)
[ 551.005199] ------------[ cut here ]------------
[ 551.006697] WARNING: CPU: 3 PID: 24674 at fs/inode.c:1528 iput+0x33b/0x400
...
[ 551.027219] Call Trace:
[ 551.027623] ovl_create_object+0x13f/0x170
[ 551.028268] ovl_create+0x27/0x30
[ 551.028799] path_openat+0x1a35/0x1ea0
[ 551.029377] do_filp_open+0xad/0x160
[ 551.029944] ? vfs_writev+0xe9/0x170
[ 551.030499] ? page_counter_try_charge+0x77/0x120
[ 551.031245] ? __alloc_fd+0x160/0x2a0
[ 551.031832] ? do_sys_open+0x189/0x340
[ 551.032417] ? get_unused_fd_flags+0x34/0x40
[ 551.033081] do_sys_open+0x189/0x340
[ 551.033632] __x64_sys_creat+0x24/0x30
[ 551.034219] do_syscall_64+0xd5/0x430
[ 551.034800] entry_SYSCALL_64_after_hwframe+0x44/0xa9

One solution is to improve error handling and call iget_failed() if error
is encountered. Amir thinks that this path is little intricate and there
is not real need to check and initialize OVL_UPPERDATA in ovl_get_inode().
Instead caller of ovl_get_inode() can initialize this state. And this will
avoid double checking of metacopy xattr lookup in ovl_lookup() and
ovl_get_inode().

OVL_UPPERDATA is inode flag. So I was little concerned that initializing
it outside ovl_get_inode() might have some races. But this is one way
transition. That is once a file has been fully copied up, it can't go back
to metacopy file again. And that seems to help avoid races. So as of now
I can't see any races w.r.t OVL_UPPERDATA being set wrongly. So move
settingof OVL_UPPERDATA inside the callers of ovl_get_inode().
ovl_obtain_alias() already does it. So only two callers now left are
ovl_lookup() and ovl_instantiate().

Reported-by: yangerkun <yangerkun@huawei.com>
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: clear ATTR_OPEN from attr->ia_valid

As of now during open(), we don't pass bunch of flags to underlying
filesystem. O_TRUNC is one of these. Normally this is not a problem as VFS

ovl: clear ATTR_OPEN from attr->ia_valid

As of now during open(), we don't pass bunch of flags to underlying
filesystem. O_TRUNC is one of these. Normally this is not a problem as VFS
calls ->setattr() with zero size and underlying filesystem sets file size
to 0.

But when overlayfs is running on top of virtiofs, it has an optimization
where it does not send setattr request to server if dectects that
truncation is part of open(O_TRUNC). It assumes that server already zeroed
file size as part of open(O_TRUNC).

fuse_do_setattr() {
if (attr->ia_valid & ATTR_OPEN) {
/*
* No need to send request to userspace, since actual
* truncation has already been done by OPEN. But still
* need to truncate page cache.
*/
}
}

IOW, fuse expects O_TRUNC to be passed to it as part of open flags.

But currently overlayfs does not pass O_TRUNC to underlying filesystem
hence fuse/virtiofs breaks. Setup overlayfs on top of virtiofs and
following does not zero the file size of a file is either upper only or has
already been copied up.

fd = open(foo.txt, O_TRUNC | O_WRONLY);

There are two ways to fix this. Either pass O_TRUNC to underlying
filesystem or clear ATTR_OPEN from attr->ia_valid so that fuse ends up
sending a SETATTR request to server. Miklos is concerned that O_TRUNC might
have side affects so it is better to clear ATTR_OPEN for now. Hence this
patch clears ATTR_OPEN from attr->ia_valid.

I found this problem while running unionmount-testsuite. With this patch,
unionmount-testsuite passes with overlayfs on top of virtiofs.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: bccece1ead36 ("ovl: allow remote upper")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: clear ATTR_FILE from attr->ia_valid

ovl_setattr() can be passed an attr which has ATTR_FILE set and
attr->ia_file is a file pointer to overlay file. This is done in
open(O_TRUNC

ovl: clear ATTR_FILE from attr->ia_valid

ovl_setattr() can be passed an attr which has ATTR_FILE set and
attr->ia_file is a file pointer to overlay file. This is done in
open(O_TRUNC) path.

We should either replace with attr->ia_file with underlying file object or
clear ATTR_FILE so that underlying filesystem does not end up using
overlayfs file object pointer.

There are no good use cases yet so for now clear ATTR_FILE. fuse seems to
be one user which can use this. But it can work even without this. So it
is not mandatory to pass ATTR_FILE to fuse.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Fixes: bccece1ead36 ("ovl: allow remote upper")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: enable xino automatically in more cases

So far, with xino=auto, we only enable xino if we know that all
underlying filesystem use 32bit inode numbers.

When users configure

ovl: enable xino automatically in more cases

So far, with xino=auto, we only enable xino if we know that all
underlying filesystem use 32bit inode numbers.

When users configure overlay with xino=auto, they already declare that
they are ready to handle 64bit inode number from overlay.

It is a very common case, that underlying filesystem uses 64bit ino,
but rarely or never uses the high inode number bits (e.g. tmpfs, xfs).
Leaving it for the users to declare high ino bits are unused with
xino=on is not a recipe for many users to enjoy the benefits of xino.

There appears to be very little reason not to enable xino when users
declare xino=auto even if we do not know how many bits underlying
filesystem uses for inode numbers.

In the worst case of xino bits overflow by real inode number, we
already fall back to the non-xino behavior - real inode number with
unique pseudo dev or to non persistent inode number and overlay st_dev
(for directories).

The only annoyance from auto enabling xino is that xino bits overflow
emits a warning to kmsg. Suppress those warnings unless users explicitly
asked for xino=on, suggesting that they expected high ino bits to be
unused by underlying filesystem.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: avoid possible inode number collisions with xino=on

When xino feature is enabled and a real directory inode number overflows
the lower xino bits, we cannot map this directory inode

ovl: avoid possible inode number collisions with xino=on

When xino feature is enabled and a real directory inode number overflows
the lower xino bits, we cannot map this directory inode number to a unique
and persistent inode number and we fall back to the real inode st_ino and
overlay st_dev.

The real inode st_ino with high bits may collide with a lower inode number
on overlay st_dev that was mapped using xino.

To avoid possible collision with legitimate xino values, map a non
persistent inode number to a dedicated range in the xino address space.
The dedicated range is created by adding one more bit to the number of
reserved high xino bits. We could have added just one more fsid, but that
would have had the undesired effect of changing persistent overlay inode
numbers on kernel or require more complex xino mapping code.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: use a private non-persistent ino pool

There is no reason to deplete the system's global get_next_ino() pool for
overlay non-persistent inode numbers and there is no reason at all to

ovl: use a private non-persistent ino pool

There is no reason to deplete the system's global get_next_ino() pool for
overlay non-persistent inode numbers and there is no reason at all to
allocate non-persistent inode numbers for non-directories.

For non-directories, it is much better to leave i_ino the same as real
i_ino, to be consistent with st_ino/d_ino.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...

ovl: fix a typo in comment

Fix a typo in comment. (annonate -> annotate)

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

ovl: simplify i_ino initialization

Move i_ino initialization to ovl_inode_init() to avoid the dance of setting
i_ino in ovl_fill_inode() sometimes on the first call and sometimes on the

ovl: simplify i_ino initialization

Move i_ino initialization to ovl_inode_init() to avoid the dance of setting
i_ino in ovl_fill_inode() sometimes on the first call and sometimes on the
seconds call.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

show more ...