nilfs2: tighten restrictions on inode flags

Nilfs has few rectrictions on which flags may be set on which inodes
like ext2/3/4 filesystems used to be. Specifically DIRSYNC may only
be set on direct

nilfs2: tighten restrictions on inode flags

Nilfs has few rectrictions on which flags may be set on which inodes
like ext2/3/4 filesystems used to be. Specifically DIRSYNC may only
be set on directories and IMMUTABLE and APPEND may not be set on
links. Tighten that to disallow TOPDIR being set on non-directories
and only NODUMP and NOATIME to be set on non-regular file,
non-directories.

This introduces a flags masking function like those of extN and uses
it during inode creation.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: mark S_NOATIME on inodes only if NOATIME attribute is set

At present, nilfs marks S_NOATIME flag on all inodes. This restricts
nilfs_set_inode_flags function so that it marks S_NOATIME only

nilfs2: mark S_NOATIME on inodes only if NOATIME attribute is set

At present, nilfs marks S_NOATIME flag on all inodes. This restricts
nilfs_set_inode_flags function so that it marks S_NOATIME only if a
given inode has an FS_NOATIME_FL flag.

Although nilfs does not support atime yet, touch_atime() still safely
returns on IS_NOATIME check since MS_NOATIME is always set on sb.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: use common file attribute macros

Replaces uses of own inode flags (i.e. NILFS_SECRM_FL, NILFS_UNRM_FL,
NILFS_COMPR_FL, and so forth) with common inode flags, and removes the
own flag declara

nilfs2: use common file attribute macros

Replaces uses of own inode flags (i.e. NILFS_SECRM_FL, NILFS_UNRM_FL,
NILFS_COMPR_FL, and so forth) with common inode flags, and removes the
own flag declarations.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: decrement inodes count only if raw inode was successfully deleted

This fixes the issue that inodes count will not add up after removal
of raw inodes fails. Hence, this prevents possible und

nilfs2: decrement inodes count only if raw inode was successfully deleted

This fixes the issue that inodes count will not add up after removal
of raw inodes fails. Hence, this prevents possible under flow of the
inodes count.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: unfold nilfs_dat_inode function

nilfs_dat_inode function was a wrapper to switch between normal dat
inode and gcdat, a clone of the dat inode for garbage collection.

This function got obsol

nilfs2: unfold nilfs_dat_inode function

nilfs_dat_inode function was a wrapper to switch between normal dat
inode and gcdat, a clone of the dat inode for garbage collection.

This function got obsolete when the gcdat inode was removed, and now
we can access the dat inode directly from a nilfs object. So, we will
unfold the wrapper and remove it.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: do not pass sbi to functions which can get it from inode

This removes argument for passing nilfs_sb_info structure from
nilfs_set_file_dirty and nilfs_load_inode_block functions. We can get

nilfs2: do not pass sbi to functions which can get it from inode

This removes argument for passing nilfs_sb_info structure from
nilfs_set_file_dirty and nilfs_load_inode_block functions. We can get
a pointer to the structure from inodes.

[Stephen Rothwell <sfr@canb.auug.org.au>: fix conflict with commit
b74c79e99389cd79b31fcc08f82c24e492e63c7e]

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: fiemap support

This adds fiemap to nilfs. Two new functions, nilfs_fiemap and
nilfs_find_uncommitted_extent are added.

nilfs_fiemap() implements the fiemap inode operation, and
nilfs_find_

nilfs2: fiemap support

This adds fiemap to nilfs. Two new functions, nilfs_fiemap and
nilfs_find_uncommitted_extent are added.

nilfs_fiemap() implements the fiemap inode operation, and
nilfs_find_uncommitted_extent() helps to get a range of data blocks
whose physical location has not been determined.

nilfs_fiemap() collects extent information by looping through
nilfs_bmap_lookup_contig and nilfs_find_uncommitted_extent routines.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: mark buffer heads as delayed until the data is written to disk

Nilfs does not allocate new blocks on disk until they are actually
written to. To implement fiemap, we need to deal with such

nilfs2: mark buffer heads as delayed until the data is written to disk

Nilfs does not allocate new blocks on disk until they are actually
written to. To implement fiemap, we need to deal with such blocks.

To allow successive fiemap patch to distinguish mapped but unallocated
regions, this marks buffer heads of those new blocks as delayed and
clears the flag after the blocks are written to disk.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: call nilfs_error inside bmap routines

Some functions using nilfs bmap routines can wrongly return invalid
argument error (i.e. -EINVAL) that bmap returns as an internal code
for btree corrup

nilfs2: call nilfs_error inside bmap routines

Some functions using nilfs bmap routines can wrongly return invalid
argument error (i.e. -EINVAL) that bmap returns as an internal code
for btree corruption.

This fixes the issue by catching and converting the internal EINVAL to
EIO and calling nilfs_error function inside bmap routines.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

fs: provide rcu-walk aware permission i_ops

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

nilfs2: see state of root dentry for mount check of snapshots

After applied the patch that unified sb instances, root dentry of
snapshots can be left in dcache even after their trees are unmounted.

nilfs2: see state of root dentry for mount check of snapshots

After applied the patch that unified sb instances, root dentry of
snapshots can be left in dcache even after their trees are unmounted.

The orphan root dentry/inode keeps a root object, and this causes
false positive of nilfs_checkpoint_is_mounted function.

This resolves the issue by having nilfs_checkpoint_is_mounted test
whether the root dentry is busy or not.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: use iget for all metadata files

This makes use of iget5_locked to allocate or get inode for metadata
files to stop using own inode allocator.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke

nilfs2: use iget for all metadata files

This makes use of iget5_locked to allocate or get inode for metadata
files to stop using own inode allocator.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: allow nilfs_clear_inode to clear metadata file inodes

Allows clear inode function (nilfs_clear_inode) to handle metadata
files that uses bitmap-based object alloctor. DAT and ifile
correspo

nilfs2: allow nilfs_clear_inode to clear metadata file inodes

Allows clear inode function (nilfs_clear_inode) to handle metadata
files that uses bitmap-based object alloctor. DAT and ifile
correspond to this.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: deny write access to inodes in snapshots

Snapshots of nilfs are read-only.

After super block instances (sb) will be unified, nilfs will need to
check write access by a way other than implic

nilfs2: deny write access to inodes in snapshots

Snapshots of nilfs are read-only.

After super block instances (sb) will be unified, nilfs will need to
check write access by a way other than implicit test with
IS_RDONLY(inode). This is because IS_RDONLY() refers to MS_RDONLY bit
of inode->i_sb->s_flags and it will become inaccurate after the
unification of sb.

To prepare for the issue, this uses i_op->permission to deny write
access to inodes in snapshots.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: move inode count and block count into root object

This moves sbi->s_inodes_count and sbi->s_blocks_count into nilfs_root
object.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.j

nilfs2: move inode count and block count into root object

This moves sbi->s_inodes_count and sbi->s_blocks_count into nilfs_root
object.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: use root object to get ifile

This rewrites functions using ifile so that they get ifile from
nilfs_root object, and will remove sbi->s_ifile. Some functions that
don't know the root object

nilfs2: use root object to get ifile

This rewrites functions using ifile so that they get ifile from
nilfs_root object, and will remove sbi->s_ifile. Some functions that
don't know the root object are extended to receive it from caller.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: set pointer to root object in inodes

This puts a pointer to nilfs_root object in the private part of
on-memory inode, and makes nilfs_iget function pick up the inode with
the same root objec

nilfs2: set pointer to root object in inodes

This puts a pointer to nilfs_root object in the private part of
on-memory inode, and makes nilfs_iget function pick up the inode with
the same root object.

Non-root inodes inherit its nilfs_root object from parent inode. That
of the root inode is allocated through nilfs_attach_checkpoint()
function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: remove own inode hash used for GC

This uses inode hash function that vfs provides instead of the own
hash table for caching gc inodes. This finally removes the own inode
hash from nilfs.

S

nilfs2: remove own inode hash used for GC

This uses inode hash function that vfs provides instead of the own
hash table for caching gc inodes. This finally removes the own inode
hash from nilfs.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: use iget5_locked to get inode

This uses iget5_locked instead of iget_locked so that gc cache can
look up inodes with an inode number and an optional checkpoint number.

Signed-off-by: Ryusuk

nilfs2: use iget5_locked to get inode

This uses iget5_locked instead of iget_locked so that gc cache can
look up inodes with an inode number and an optional checkpoint number.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

nilfs2: allow nilfs_dirty_inode to mark metadata file inodes dirty

This allows sop->dirty_inode callback function (nilfs_dirty_inode) to
handle metadata file inodes.

Signed-off-by: Ryusuke Konishi

nilfs2: allow nilfs_dirty_inode to mark metadata file inodes dirty

This allows sop->dirty_inode callback function (nilfs_dirty_inode) to
handle metadata file inodes.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

show more ...

convert nilfs2 to ->evict_inode()

[folded build fix from sfr]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

remove inode_setattr

Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the pr

remove inode_setattr

Replace inode_setattr with opencoded variants of it in all callers. This
moves the remaining call to vmtruncate into the filesystem methods where it
can be replaced with the proper truncate sequence.

In a few cases it was obvious that we would never end up calling vmtruncate
so it was left out in the opencoded variant:

spufs: explicitly checks for ATTR_SIZE earlier
btrfs,hugetlbfs,logfs,dlmfs: explicitly clears ATTR_SIZE earlier
ufs: contains an opencoded simple_seattr + truncate that sets the filesize just above

In addition to that ncpfs called inode_setattr with handcrafted iattrs,
which allowed to trim down the opencoded variant.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

get rid of block_write_begin_newtrunc

Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to b

get rid of block_write_begin_newtrunc

Move the call to vmtruncate to get rid of accessive blocks to the callers
in preparation of the new truncate sequence and rename the non-truncating
version to block_write_begin.

While we're at it also remove several unused arguments to block_write_begin.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

sort out blockdev_direct_IO variants

Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKI

sort out blockdev_direct_IO variants

Move the call to vmtruncate to get rid of accessive blocks to the callers
in prepearation of the new truncate calling sequence. This was only done
for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant
was not needed anyway. Get rid of blockdev_direct_IO_no_locking and
its _newtrunc variant while at it as just opencoding the two additional
paramters is shorted than the name suffix.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...

nilfs2: replace inode uid,gid,mode initialization with helper function

Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by:

nilfs2: replace inode uid,gid,mode initialization with helper function

Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

show more ...