NFS: Convert v3 into a module

This patch exports symbols and moves over the final structures needed by
the v3 module. In addition, I also switch over to using IS_ENABLED() to
check

NFS: Convert v3 into a module

This patch exports symbols and moves over the final structures needed by
the v3 module. In addition, I also switch over to using IS_ENABLED() to
check if CONFIG_NFS_V3 or CONFIG_NFS_V3_MODULE are set.

The module (nfs3.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Split out remaining NFS v4 inode functions

Somehow I missed this in my previous patch series, but these functions
are only needed by the v4 code and should be moved to a v4-only fil

NFS: Split out remaining NFS v4 inode functions

Somehow I missed this in my previous patch series, but these functions
are only needed by the v4 code and should be moved to a v4-only file. I
wasn't exactly sure where I should put these functions, so I moved them
into nfs4super.c where I could make them static.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Pass super operations and xattr handlers in the nfs_subversion

I can set all variables in the nfs_fill_super() function, allowing me to
remove the nfs4_fill_super() function.

NFS: Pass super operations and xattr handlers in the nfs_subversion

I can set all variables in the nfs_fill_super() function, allowing me to
remove the nfs4_fill_super() function.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Only initialize the ACL client in the v3 case

v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.

Sign

NFS: Only initialize the ACL client in the v3 case

v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create a try_mount rpc op

I'm already looking up the nfs subversion in nfs_fs_mount(), so I have
easy access to rpc_ops that used to be difficult to reach. This allows
me to se

NFS: Create a try_mount rpc op

I'm already looking up the nfs subversion in nfs_fs_mount(), so I have
easy access to rpc_ops that used to be difficult to reach. This allows
me to set up a different mount path for NFS v2/3 and NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Add version registering framework

This patch adds in the code to track multiple versions of the NFS
protocol. I created default structures for v2, v3 and v4 so that each
versio

NFS: Add version registering framework

This patch adds in the code to track multiple versions of the NFS
protocol. I created default structures for v2, v3 and v4 so that each
version can continue to work while I convert them into kernel modules.
I also removed the const parameter from the rpc_version array so that I
can change it at runtime.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Split out the NFS v4 filesystem types

This allows me to move the v4 mounting and unmounting functions out of
the generic client and into a file that is only compiled when CONFIG_NFS

NFS: Split out the NFS v4 filesystem types

This allows me to move the v4 mounting and unmounting functions out of
the generic client and into a file that is only compiled when CONFIG_NFS_V4
is enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Split out NFS v4 server creating code

These functions are specific to NFS v4 and can be moved to nfs4client.c
to keep them out of the generic client.

Signed-off-by: Bryan S

NFS: Split out NFS v4 server creating code

These functions are specific to NFS v4 and can be moved to nfs4client.c
to keep them out of the generic client.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Initialize the NFS v4 client from init_nfs_v4()

And split these functions out of the generic client into a v4 specific
file.

Signed-off-by: Bryan Schumaker <bjschuma@netapp

NFS: Initialize the NFS v4 client from init_nfs_v4()

And split these functions out of the generic client into a v4 specific
file.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Split out NFS v4 file operations

This patch moves the NFS v4 file functions into a new file that is only
compiled when CONFIG_NFS_V4 is enabled.

Signed-off-by: Bryan Schuma

NFS: Split out NFS v4 file operations

This patch moves the NFS v4 file functions into a new file that is only
compiled when CONFIG_NFS_V4 is enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Split out NFS v2 inode operations

This patch moves the NFS v2 file and directory inode functions into
files that are only compiled whet CONFIG_NFS_V2 is enabled.

Signed-off

NFS: Split out NFS v2 inode operations

This patch moves the NFS v2 file and directory inode functions into
files that are only compiled whet CONFIG_NFS_V2 is enabled.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create an write_pageio_init() function

pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
ini

NFS: Create an write_pageio_init() function

pNFS needs to select a write function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing writes.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create an read_pageio_init() function

pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initi

NFS: Create an read_pageio_init() function

pNFS needs to select a read function based on the layout driver
currently in use, so I let each NFS version decide how to best handle
initializing reads.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create an alloc_client rpc_op

This gives NFS v4 a way to set up callbacks and sessions without v2 or
v3 having to do them as well.

Signed-off-by: Bryan Schumaker <bjschuma@

NFS: Create an alloc_client rpc_op

This gives NFS v4 a way to set up callbacks and sessions without v2 or
v3 having to do them as well.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create a free_client rpc_op

NFS v4 needs a way to shut down callbacks and sessions, but v2 and v3
don't.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off

NFS: Create a free_client rpc_op

NFS v4 needs a way to shut down callbacks and sessions, but v2 and v3
don't.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Ensure that setattr and getattr wait for O_DIRECT write completion

Use the same mechanism as the block devices are using, but move the
helper functions from fs/direct-io.c into fs/i

NFS: Ensure that setattr and getattr wait for O_DIRECT write completion

Use the same mechanism as the block devices are using, but move the
helper functions from fs/direct-io.c into fs/inode.c to remove the
dependency on CONFIG_BLOCK.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

NFSv4: Fix a race in the net namespace mount notification

Since the struct nfs_client gets added to the global nfs_client_list
before it is initialised, it is possible that rpc_pipefs_ev

NFSv4: Fix a race in the net namespace mount notification

Since the struct nfs_client gets added to the global nfs_client_list
before it is initialised, it is possible that rpc_pipefs_event can
end up trying to create idmapper entries on such a thing.

The solution is to have the mount notification wait for the
initialisation of each nfs_client to complete, and then to
skip any entries for which the it failed.

Reported-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>

show more ...

NFSv4.1: Fix session initialisation races

Session initialisation is not complete until the lease manager
has run. We need to ensure that both nfs4_init_session and
nfs4_init_ds_sessi

NFSv4.1: Fix session initialisation races

Session initialisation is not complete until the lease manager
has run. We need to ensure that both nfs4_init_session and
nfs4_init_ds_session do so, and that they check for any resulting
errors in clp->cl_cons_state.

Only after this is done, can nfs4_ds_connect check the contents
of clp->cl_exchange_flags.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Andy Adamson <andros@netapp.com>

show more ...

NFS: Add nfs_client behavior flags

"noresvport" and "discrtry" can be passed to nfs_create_rpc_client()
by setting flags in the passed-in nfs_client. This change makes it
easy to ad

NFS: Add nfs_client behavior flags

"noresvport" and "discrtry" can be passed to nfs_create_rpc_client()
by setting flags in the passed-in nfs_client. This change makes it
easy to add new flags.

Note that these settings are now "sticky" over the lifetime of a
struct nfs_client, and may even be copied when an nfs_client is
cloned.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Refactor nfs_get_client(): initialize nfs_client

Clean up: Continue to rationalize the locking in nfs_get_client() by
moving the logic that handles the case where a matching server

NFS: Refactor nfs_get_client(): initialize nfs_client

Clean up: Continue to rationalize the locking in nfs_get_client() by
moving the logic that handles the case where a matching server IP
address is not found.

When we support server trunking detection, client initialization may
return a different nfs_client struct than was passed to it. Change
the synopsis of the init_client methods to return an nfs_client.

The client initialization logic in nfs_get_client() is not much more
than a wrapper around ->init_client. It's simpler to keep the little
bits of error handling in the version-specific init_client methods.

No behavior change is expected.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFSv4.1 remove nfs4_reset_write and nfs4_reset_read

Replaced by filelayout_reset_write and filelayout_reset_read

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: T

NFSv4.1 remove nfs4_reset_write and nfs4_reset_read

Replaced by filelayout_reset_write and filelayout_reset_read

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFSv4.1 data server timeo and retrans module parameters

Set the recovery parameters for data servers.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Mykleb

NFSv4.1 data server timeo and retrans module parameters

Set the recovery parameters for data servers.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFSv4.1 set RPC_TASK_SOFTCONN for filelayout DS RPC calls

RPC_TASK_SOFTCONN returns connection errors to the caller which allows the pNFS
file layout to quickly try the MDS or perhaps an

NFSv4.1 set RPC_TASK_SOFTCONN for filelayout DS RPC calls

RPC_TASK_SOFTCONN returns connection errors to the caller which allows the pNFS
file layout to quickly try the MDS or perhaps another DS.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create an NFS v3 stat_to_errno()

In theory, NFS v3 can have different error versions than NFS v2. v4 is
already using its own nfs4_stat_to_errno() to map error codes, so
rather

NFS: Create an NFS v3 stat_to_errno()

In theory, NFS v3 can have different error versions than NFS v2. v4 is
already using its own nfs4_stat_to_errno() to map error codes, so
rather than create something in the generic client for v2 and v3 to
share I instead give v3 its own function.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create a single function for text mount data

The v2/3 and v4 cases were very similar, with just a few parameters
changed. This makes it easy to share code.

Signed-off-by:

NFS: Create a single function for text mount data

The v2/3 and v4 cases were very similar, with just a few parameters
changed. This makes it easy to share code.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...