NFS avoid expired credential keys for buffered writes

We must avoid buffering a WRITE that is using a credential key (e.g. a GSS
context key) that is about to expire or has expired. We currently wi

NFS avoid expired credential keys for buffered writes

We must avoid buffering a WRITE that is using a credential key (e.g. a GSS
context key) that is about to expire or has expired. We currently will
paint ourselves into a corner by returning success to the applciation
for such a buffered WRITE, only to discover that we do not have permission when
we attempt to flush the WRITE (and potentially associated COMMIT) to disk.

Use the RPC layer credential key timeout and expire routines which use a
a watermark, gss_key_expire_timeo. We test the key in nfs_file_write.

If a WRITE is using a credential with a key that will expire within
watermark seconds, flush the inode in nfs_write_end and send only
NFS_FILE_SYNC WRITEs by adding nfs_ctx_key_to_expire to nfs_need_sync_write.
Note that this results in single page NFS_FILE_SYNC WRITEs.

Signed-off-by: Andy Adamson <andros@netapp.com>
[Trond: removed a pr_warn_ratelimited() for now]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: refactor code for calculating the crc32 hash of a filehandle

We want to be able to display the crc32 hash of the filehandle in
tracepoints.

Signed-off-by: Trond Myklebust <Trond.Myklebust@neta

NFS: refactor code for calculating the crc32 hash of a filehandle

We want to be able to display the crc32 hash of the filehandle in
tracepoints.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS Remove unused authflavour parameter from init_client

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFSv4.1 Fix gdia_maxcount calculation to fit in ca_maxresponsesize

The GETDEVICEINFO gdia_maxcount represents all of the data being returned
within the GETDEVICEINFO4resok structure and includes the

NFSv4.1 Fix gdia_maxcount calculation to fit in ca_maxresponsesize

The GETDEVICEINFO gdia_maxcount represents all of the data being returned
within the GETDEVICEINFO4resok structure and includes the XDR overhead.

The CREATE_SESSION ca_maxresponsesize is the maximum reply and includes the RPC
headers (including security flavor credentials and verifiers).

Split out the struct pnfs_device field maxcount which is the gdia_maxcount
from the pglen field which is the reply (the total) buffer length.

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Make callbacks minor version generic

I found a few places that hardcode the minor version number rather than
making it dependent on the protocol the callback came in over. This
patch makes it

NFS: Make callbacks minor version generic

I found a few places that hardcode the minor version number rather than
making it dependent on the protocol the callback came in over. This
patch makes it easier to add new minor versions in the future.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Add functionality to allow waiting on all outstanding reads to complete

This will later allow NFS locking code to wait for readahead to complete
before releasing byte range locks.

Signed-off-b

NFS: Add functionality to allow waiting on all outstanding reads to complete

This will later allow NFS locking code to wait for readahead to complete
before releasing byte range locks.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

Revert "NFS: add nfs_sb_deactive_async to avoid deadlock"

This reverts commit 324d003b0cd82151adbaecefef57b73f7959a469.

The deadlock turned out to be caused by a workqueue limitation that has
now b

Revert "NFS: add nfs_sb_deactive_async to avoid deadlock"

This reverts commit 324d003b0cd82151adbaecefef57b73f7959a469.

The deadlock turned out to be caused by a workqueue limitation that has
now been worked around in the RPC code (see comment in rpc_free_task).

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Ensure that we always drop inodes that have been marked as stale

There is no need to cache stale inodes.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs: Remove duplicate function declaration in internal.h

Remove duplicate function declaration in internal.h

Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
[Trond: Added nfs_pageio_init_read, whic

nfs: Remove duplicate function declaration in internal.h

Remove duplicate function declaration in internal.h

Signed-off-by: Yanchuan Nian <ycnian@gmail.com>
[Trond: Added nfs_pageio_init_read, which suffered from the same problem]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFSv4: Simplify the NFSv4/v4.1 synchronous call switch

We shouldn't need to pass the 'cache_reply' parameter if we
initialise the sequence_args/sequence_res in the caller.

Signed-off-by: Trond Mykl

NFSv4: Simplify the NFSv4/v4.1 synchronous call switch

We shouldn't need to pass the 'cache_reply' parameter if we
initialise the sequence_args/sequence_res in the caller.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFSv4.1: Move slot table and session struct definitions to nfs4session.h

Clean up. Gather NFSv4.1 slot definitions in fs/nfs/nfs4session.h.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.co

NFSv4.1: Move slot table and session struct definitions to nfs4session.h

Clean up. Gather NFSv4.1 slot definitions in fs/nfs/nfs4session.h.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFSv4.1: Cleanup move session slot management to fs/nfs/nfs4session.c

NFSv4.1 session management is getting complex enough to deserve
a separate file.

Signed-off-by: Trond Myklebust <Trond.Myklebus

NFSv4.1: Cleanup move session slot management to fs/nfs/nfs4session.c

NFSv4.1 session management is getting complex enough to deserve
a separate file.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: add nfs_sb_deactive_async to avoid deadlock

Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue
context. This avoids a deadlock where rpc_shutdown_client loops forever
in

NFS: add nfs_sb_deactive_async to avoid deadlock

Use nfs_sb_deactive_async instead of nfs_sb_deactive when in a workqueue
context. This avoids a deadlock where rpc_shutdown_client loops forever
in a workqueue kworker context, trying to kill all RPC tasks associated with
the client, while one or more of these tasks have already been assigned to the
same kworker (and will never run rpc_exit_task).

This approach is needed because RPC tasks that have already been assigned
to a kworker by queue_work cannot be canceled, as explained in the comment
for workqueue.c:insert_wq_barrier.

Signed-off-by: Weston Andros Adamson <dros@netapp.com>
[Trond: add module_get/put.]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

nfs: Show original device name verbatim in /proc/*/mount{s,info}

Since commit c7f404b ('vfs: new superblock methods to override
/proc/*/mount{s,info}'), nfs_path() is used to generate the mounted
de

nfs: Show original device name verbatim in /proc/*/mount{s,info}

Since commit c7f404b ('vfs: new superblock methods to override
/proc/*/mount{s,info}'), nfs_path() is used to generate the mounted
device name reported back to userland.

nfs_path() always generates a trailing slash when the given dentry is
the root of an NFS mount, but userland may expect the original device
name to be returned verbatim (as it used to be). Make this
canonicalisation optional and change the callers accordingly.

[jrnieder@gmail.com: use flag instead of bool argument]
Reported-and-tested-by: Chris Hiestand <chiestand@salk.edu>
Reference: http://bugs.debian.org/669314
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS41: send real write size in layoutget

For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-is

NFS41: send real write size in layoutget

For buffer write, block layout client scan inode mapping to find
next hole and use offset-to-hole as layoutget length. Object
layout client uses offset-to-isize as layoutget length.

For direct write, both block layout and object layout use dreq->bytes_left.

Signed-off-by: Peng Tao <tao.peng@emc.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Discover NFSv4 server trunking when mounting

"Server trunking" is a fancy named for a multi-homed NFS server.
Trunking might occur if a client sends NFS requests for a single
workload to multip

NFS: Discover NFSv4 server trunking when mounting

"Server trunking" is a fancy named for a multi-homed NFS server.
Trunking might occur if a client sends NFS requests for a single
workload to multiple network interfaces on the same server. There
are some implications for NFSv4 state management that make it useful
for a client to know if a single NFSv4 server instance is
multi-homed. (Note this is only a consideration for NFSv4, not for
legacy versions of NFS, which are stateless).

If a client cares about server trunking, no NFSv4 operations can
proceed until that client determines who it is talking to. Thus
server IP trunking discovery must be done when the client first
encounters an unfamiliar server IP address.

The nfs_get_client() function walks the nfs_client_list and matches
on server IP address. The outcome of that walk tells us immediately
if we have an unfamiliar server IP address. It invokes
nfs_init_client() in this case. Thus, nfs4_init_client() is a good
spot to perform trunking discovery.

Discovery requires a client to establish a fresh client ID, so our
client will now send SETCLIENTID or EXCHANGE_ID as the first NFS
operation after a successful ping, rather than waiting for an
application to perform an operation that requires NFSv4 state.

The exact process for detecting trunking is different for NFSv4.0 and
NFSv4.1, so a minorversion-specific init_client callout method is
introduced.

CLID_INUSE recovery is important for the trunking discovery process.
CLID_INUSE is a sign the server recognizes the client's nfs_client_id4
id string, but the client is using the wrong principal this time for
the SETCLIENTID operation. The SETCLIENTID must be retried with a
series of different principals until one works, and then the rest of
trunking discovery can proceed.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: nfs_parsed_mount_options can use unsigned int

fs/nfs/super.c: In function ‘nfs_compare_remount_data’:
fs/nfs/super.c:2042:18: warning: comparison between signed and
unsigned integer express

NFS: nfs_parsed_mount_options can use unsigned int

fs/nfs/super.c: In function ‘nfs_compare_remount_data’:
fs/nfs/super.c:2042:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2043:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2044:20: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2046:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2047:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2048:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2049:21: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]
fs/nfs/super.c:2050:18: warning: comparison between signed and
unsigned integer expressions [-Wsign-compare]

Seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2).

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

nfs: teach the NFS client how to treat PG_swapcache pages

Replace all relevant occurences of page->index and page->mapping in the
NFS client with the new page_file_index() and page_file_mapping()
fu

nfs: teach the NFS client how to treat PG_swapcache pages

Replace all relevant occurences of page->index and page->mapping in the
NFS client with the new page_file_index() and page_file_mapping()
functions.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

NFS: Convert v4 into a module

This patch exports symbols needed by the v4 module. In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.

T

NFS: Convert v4 into a module

This patch exports symbols needed by the v4 module. In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.

The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Convert v3 into a module

This patch exports symbols and moves over the final structures needed by
the v3 module. In addition, I also switch over to using IS_ENABLED() to
check if CONFIG_NFS_V3

NFS: Convert v3 into a module

This patch exports symbols and moves over the final structures needed by
the v3 module. In addition, I also switch over to using IS_ENABLED() to
check if CONFIG_NFS_V3 or CONFIG_NFS_V3_MODULE are set.

The module (nfs3.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Split out remaining NFS v4 inode functions

Somehow I missed this in my previous patch series, but these functions
are only needed by the v4 code and should be moved to a v4-only file. I
wasn't

NFS: Split out remaining NFS v4 inode functions

Somehow I missed this in my previous patch series, but these functions
are only needed by the v4 code and should be moved to a v4-only file. I
wasn't exactly sure where I should put these functions, so I moved them
into nfs4super.c where I could make them static.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Pass super operations and xattr handlers in the nfs_subversion

I can set all variables in the nfs_fill_super() function, allowing me to
remove the nfs4_fill_super() function.

Signed-off-by: Br

NFS: Pass super operations and xattr handlers in the nfs_subversion

I can set all variables in the nfs_fill_super() function, allowing me to
remove the nfs4_fill_super() function.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Only initialize the ACL client in the v3 case

v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.

Signed-off-by: Bryan Sch

NFS: Only initialize the ACL client in the v3 case

v2 and v4 don't use it, so I create two new nfs_rpc_ops functions to
initialize the ACL client only when we are using v3.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Create a try_mount rpc op

I'm already looking up the nfs subversion in nfs_fs_mount(), so I have
easy access to rpc_ops that used to be difficult to reach. This allows
me to set up a different

NFS: Create a try_mount rpc op

I'm already looking up the nfs subversion in nfs_fs_mount(), so I have
easy access to rpc_ops that used to be difficult to reach. This allows
me to set up a different mount path for NFS v2/3 and NFS v4.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...

NFS: Add version registering framework

This patch adds in the code to track multiple versions of the NFS
protocol. I created default structures for v2, v3 and v4 so that each
version can continue t

NFS: Add version registering framework

This patch adds in the code to track multiple versions of the NFS
protocol. I created default structures for v2, v3 and v4 so that each
version can continue to work while I convert them into kernel modules.
I also removed the const parameter from the rpc_version array so that I
can change it at runtime.

Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

show more ...