btrfs: switch compression callbacks to direct calls

The indirect calls bring some overhead due to spectre vulnerability
mitigations. The number of cases is small and below the threshold
(10-20) wher

btrfs: switch compression callbacks to direct calls

The indirect calls bring some overhead due to spectre vulnerability
mitigations. The number of cases is small and below the threshold
(10-20) where indirect call would be better.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: export compression and decompression callbacks

Export compress_pages, decompress_bio and decompress callbacks for all
compression algos. The indirect calls will be replaced by a switch.

Revi

btrfs: export compression and decompression callbacks

Export compress_pages, decompress_bio and decompress callbacks for all
compression algos. The indirect calls will be replaced by a switch.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: use better definition of number of compression type

The compression type upper limit constant is the same as the last value
and this is confusing. In order to keep coding style consistent, u

btrfs: use better definition of number of compression type

The compression type upper limit constant is the same as the last value
and this is confusing. In order to keep coding style consistent, use
BTRFS_NR_COMPRESS_TYPES as the total number that follows the idom of
'NR' being one more than the last value.

Signed-off-by: Chengguang Xu <cgxu519@mykernel.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios

Async CRCs and compression submit IO through helper threads, which means
they have IO priority inversions when cgroup IO controllers are i

Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios

Async CRCs and compression submit IO through helper threads, which means
they have IO priority inversions when cgroup IO controllers are in use.

This flags all of the writes submitted by btrfs helper threads as
REQ_CGROUP_PUNT. submit_bio() will punt these to dedicated per-blkcg
work items to avoid the priority inversion.

For the compression code, we take a reference on the wbc's blkg css and
pass it down to the async workers.

For the async CRCs, the bio already has the correct css, we just need to
tell the block layer to use REQ_CGROUP_PUNT.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Chris Mason <clm@fb.com>
Modified-and-reviewed-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

Btrfs: stop using btrfs_schedule_bio()

btrfs_schedule_bio() hands IO off to a helper thread to do the actual
submit_bio() call. This has been used to make sure async crc and
compression helpers don

Btrfs: stop using btrfs_schedule_bio()

btrfs_schedule_bio() hands IO off to a helper thread to do the actual
submit_bio() call. This has been used to make sure async crc and
compression helpers don't get stuck on IO submission. To maintain good
performance, over time the IO submission threads duplicated some IO
scheduler characteristics such as high and low priority IOs and they
also made some ugly assumptions about request allocation batch sizes.

All of this cost at least one extra context switch during IO submission,
and doesn't fit well with the modern blkmq IO stack. So, this commit stops
using btrfs_schedule_bio(). We may need to adjust the number of async
helper threads for crcs and compression, but long term it's a better
path.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: move cond_wake_up functions out of ctree

The file ctree.h serves as a header for everything and has become quite
bloated. Split some helpers that are generic and create a new file that
should

btrfs: move cond_wake_up functions out of ctree

The file ctree.h serves as a header for everything and has become quite
bloated. Split some helpers that are generic and create a new file that
should be the catch-all for code that's not btrfs-specific.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: compression: replace set_level callbacks by a common helper

The set_level callbacks do not do anything special and can be replaced
by a helper that uses the levels defined in the tables.

Rev

btrfs: compression: replace set_level callbacks by a common helper

The set_level callbacks do not do anything special and can be replaced
by a helper that uses the levels defined in the tables.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: lift bio_set_dev from bio allocation helpers

The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
fu

btrfs: lift bio_set_dev from bio allocation helpers

The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.

Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: correctly validate compression type

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 184

btrfs: correctly validate compression type

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979

[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674] dump_stack+0x7c/0xbb
[ 1843.477132] ? strncmp+0x66/0xb0
[ 1843.477587] print_address_description+0x114/0x320
[ 1843.478256] ? strncmp+0x66/0xb0
[ 1843.478740] ? strncmp+0x66/0xb0
[ 1843.479185] __kasan_report+0x14e/0x192
[ 1843.479759] ? strncmp+0x66/0xb0
[ 1843.480209] kasan_report+0xe/0x20
[ 1843.480679] strncmp+0x66/0xb0
[ 1843.481105] prop_compression_validate+0x24/0x70
[ 1843.481798] btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509] __vfs_setxattr+0x71/0x90
[ 1843.483012] __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606] vfs_setxattr+0xac/0xb0
[ 1843.484085] setxattr+0x18c/0x230
[ 1843.484546] ? vfs_setxattr+0xb0/0xb0
[ 1843.485048] ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672] ? _raw_spin_unlock+0x24/0x40
[ 1843.486233] ? __handle_mm_fault+0x988/0x1290
[ 1843.486823] ? lock_acquire+0xb4/0x1e0
[ 1843.487330] ? lock_acquire+0xb4/0x1e0
[ 1843.487842] ? mnt_want_write_file+0x3c/0x80
[ 1843.488442] ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089] ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707] ? __sb_start_write+0x158/0x200
[ 1843.490278] ? mnt_want_write_file+0x3c/0x80
[ 1843.490855] ? __mnt_want_write+0x98/0xe0
[ 1843.491397] __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201] ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201] do_syscall_64+0x6c/0x230
[ 1843.493988] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff

[ 1843.505268] Allocated by task 3979:
[ 1843.505771] save_stack+0x19/0x80
[ 1843.506211] __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836] setxattr+0xeb/0x230
[ 1843.507264] __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886] do_syscall_64+0x6c/0x230
[ 1843.508429] entry_SYSCALL_64_after_hwframe+0x49/0xbe

[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)

[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected

[ 1843.525936] Memory state around the buggy address:
[ 1843.526975] ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479] ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877] ^
[ 1843.533287] ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874] ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.

Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: remove assumption about csum type form btrfs_print_data_csum_error()

btrfs_print_data_csum_error() still assumed checksums to be 32 bit in
size. Make it size agnostic.

Reviewed-by: Nikolay

btrfs: remove assumption about csum type form btrfs_print_data_csum_error()

btrfs_print_data_csum_error() still assumed checksums to be 32 bit in
size. Make it size agnostic.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: directly call into crypto framework for checksumming

Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.

As we have our own crypt

btrfs: directly call into crypto framework for checksumming

Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.

As we have our own crypto_shash structure in the fs_info now, we can
directly call into the crypto framework without going trough the wrapper.

This way we can even remove the btrfs_csum_data() and btrfs_csum_final()
wrappers.

The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre:
crc32c"), which was previously provided by LIBCRC32C config option doing
the same.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: don't assume compressed_bio sums to be 4 bytes

BTRFS has the implicit assumption that a checksum in compressed_bio is 4
bytes. While this is true for CRC32C, it is not for any other checksum.

btrfs: don't assume compressed_bio sums to be 4 bytes

BTRFS has the implicit assumption that a checksum in compressed_bio is 4
bytes. While this is true for CRC32C, it is not for any other checksum.

Change the data type to be a byte array and adjust loop index calculation
accordingly.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: don't assume ordered sums to be 4 bytes

BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.

Ch

btrfs: don't assume ordered sums to be 4 bytes

BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.

Change the data type to be a byte array and adjust loop index
calculation accordingly.

This includes moving the adjustment of 'index' by 'ins_size' in
btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum
size, because before this patch the 'sums' member of 'struct
btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one
byte.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: Check the compression level before getting a workspace

When a file's compression property is set as zlib or zstd but leave
the compression mount option not be set, that means btrfs will try
t

btrfs: Check the compression level before getting a workspace

When a file's compression property is set as zlib or zstd but leave
the compression mount option not be set, that means btrfs will try
to compress the file with default compression level. But in
btrfs_compress_pages(), it calls get_workspace() with level = 0.
This will return a workspace with a wrong compression level.
For zlib, the compression level in the workspace will be 0
(that means "store only"). And for zstd, the compression in the
workspace will be 1, not the default level 3.

How to reproduce:
mkfs -t btrfs /dev/sdb
mount /dev/sdb /mnt/
mkdir /mnt/zlib
btrfs property set /mnt/zlib/ compression zlib
dd if=/dev/zero of=/mnt/zlib/compression-friendly-file-10M bs=1M count=10
sync
btrfs-debugfs -f /mnt/zlib/compression-friendly-file-10M

btrfs-debugfs output:
* before:
...
(258 9961472): ram 524288 disk 1106247680 disk_size 524288
file: ... extents 20 disk size 10485760 logical size 10485760 ratio 1.00

* after:
...
(258 10354688): ram 131072 disk 14217216 disk_size 4096
file: ... extents 80 disk size 327680 logical size 10485760 ratio 32.00

The steps for zstd are similar, but need to put a debugging message to
show the level of the return workspace in zstd_get_workspace().

This commit adds a check of the compression level before getting a
workspace by set_level().

CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Johnny Chang <johnnyc@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

block: remove the i argument to bio_for_each_segment_all

We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.

Suggested-by: Matthew Wilcox <will

block: remove the i argument to bio_for_each_segment_all

We only have two callers that need the integer loop iterator, and they
can easily maintain it themselves.

Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Acked-by: Coly Li <colyli@suse.de>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

btrfs: Use less confusing condition for uptodate parameter to btrfs_writepage_endio_finish_ordered

The uptodate parameter of btrfs_writepage_endio_finish_ordered is used
to signal whether an error h

btrfs: Use less confusing condition for uptodate parameter to btrfs_writepage_endio_finish_ordered

The uptodate parameter of btrfs_writepage_endio_finish_ordered is used
to signal whether an error has occured while writing the given page.
0 signals an error, which is propagated to callees and 1 signifies
success. In end_compressed_bio_write the ->bi_status is checked and
based on it either BLK_STS_OK (0) or BLK_STS_NOTSUPP (1) are used. While
from functional point of view this is ok it's a for the poor reader of
the code, since the block layer values are conflated with the semantics
of the parameter.

Just use plain 0 or 1. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: change set_level() to bound the level passed in

Currently, the only user of set_level() is zlib which sets an internal
workspace parameter. As level is now plumbed into get_workspace(), this

btrfs: change set_level() to bound the level passed in

Currently, the only user of set_level() is zlib which sets an internal
workspace parameter. As level is now plumbed into get_workspace(), this
can be handled there rather than separately.

This repurposes set_level() to bound the level passed in so it can be
used when setting the mounts compression level and as well as verifying
the level before getting a workspace. The other benefit is this divides
the meaning of compress(0) and get_workspace(0). The former means we
want to use the default compression level of the compression type. The
latter means we can use any workspace available.

Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: plumb level through the compression interface

Zlib compression supports multiple levels, but doesn't require changing
in how a workspace itself is created and managed. Zstd introduces a
diffe

btrfs: plumb level through the compression interface

Zlib compression supports multiple levels, but doesn't require changing
in how a workspace itself is created and managed. Zstd introduces a
different memory requirement such that higher levels of compression
require more memory.

This requires changes in how the alloc()/get() methods work for zstd.
This pach plumbs compression level through the interface as a parameter
in preparation for zstd compression levels. This gives the compression
types opportunity to create/manage based on the compression level.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: move to function pointers for get/put workspaces

The previous patch added generic helpers for get_workspace() and
put_workspace(). Now, we can migrate ownership of the workspace_manager
to be

btrfs: move to function pointers for get/put workspaces

The previous patch added generic helpers for get_workspace() and
put_workspace(). Now, we can migrate ownership of the workspace_manager
to be in the compression type code as the compression code itself
doesn't care beyond being able to get a workspace. The init/cleanup and
get/put methods are abstracted so each compression algorithm can decide
how they want to manage their workspaces.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: add compression interface in (get/put)_workspace

There are two levels of workspace management. First, alloc()/free()
which are responsible for actually creating and destroy workspaces.
Second

btrfs: add compression interface in (get/put)_workspace

There are two levels of workspace management. First, alloc()/free()
which are responsible for actually creating and destroy workspaces.
Second, at a higher level, get()/put() which is the compression code
asking for a workspace from a workspace_manager.

The compression code shouldn't really care how it gets a workspace, but
that it got a workspace. This adds get_workspace() and put_workspace()
to be the higher level interface which is responsible for indexing into
the appropriate compression type. It also introduces
btrfs_put_workspace() and btrfs_get_workspace() to be the generic
implementations of the higher interface.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: add helper methods for workspace manager init and cleanup

Workspace manager init and cleanup code is open coded inside a for loop
over the compression types. This forces each compression type

btrfs: add helper methods for workspace manager init and cleanup

Workspace manager init and cleanup code is open coded inside a for loop
over the compression types. This forces each compression type to rely on
the same workspace manager implementation. This patch creates helper
methods that will be the generic implementation for btrfs workspace
management.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: unify compression ops with workspace_manager

Make the workspace_manager own the interface operations rather than
managing index-paired arrays for the workspace_manager and compression
operati

btrfs: unify compression ops with workspace_manager

Make the workspace_manager own the interface operations rather than
managing index-paired arrays for the workspace_manager and compression
operations.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: manage heuristic workspace as index 0

While the heuristic workspaces aren't really compression workspaces,
they use the same interface for managing them. So rather than branching,
let's just

btrfs: manage heuristic workspace as index 0

While the heuristic workspaces aren't really compression workspaces,
they use the same interface for managing them. So rather than branching,
let's just handle them once again as the index 0 compression type.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: rename workspaces_list to workspace_manager

This is in preparation for zstd compression levels. As each level will
require different size of workspace, workspaces_list is no longer a
really f

btrfs: rename workspaces_list to workspace_manager

This is in preparation for zstd compression levels. As each level will
require different size of workspace, workspaces_list is no longer a
really fitting name.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

btrfs: add helpers for compression type and level

It is very easy to miss places that rely on a certain bitshifting for
decoding the type_level overloading. Add helpers to do this instead.

Cc: Omar

btrfs: add helpers for compression type and level

It is very easy to miss places that rely on a certain bitshifting for
decoding the type_level overloading. Add helpers to do this instead.

Cc: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...