usb: typec: ucsi: Store the notification mask

The driver needs to ignore any Connector Change Events
before the Connector Change Indication notifications have
actually been enabled. This adds a chec

usb: typec: ucsi: Store the notification mask

The driver needs to ignore any Connector Change Events
before the Connector Change Indication notifications have
actually been enabled. This adds a check to
ucsi_connector_change() function to make sure the function
does not try to process the event unless the Connector
Change notifications have been enabled.

It is quite common that the firmware representing the "PPM"
(Platform Policy Manager) starts generating Connector Change
notifications even when only the Command Completion
notifications are enabled.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230133431.63445-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: New error codes

Adding new error codes to the driver that were introduced in
UCSI specification v1.1.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: A

usb: typec: ucsi: New error codes

Adding new error codes to the driver that were introduced in
UCSI specification v1.1.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191104142435.29960-18-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Remove all bit-fields

We can't use bit fields with data that is received or send
to/from the device.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Aj

usb: typec: ucsi: Remove all bit-fields

We can't use bit fields with data that is received or send
to/from the device.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Link: https://lore.kernel.org/r/20191104142435.29960-17-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Remove struct ucsi_control

That data structure was used for constructing the commands
before executing them, but it was never really useful. Using
the structure just complicated th

usb: typec: ucsi: Remove struct ucsi_control

That data structure was used for constructing the commands
before executing them, but it was never really useful. Using
the structure just complicated the driver. The commands are
64-bit wide, so it is enough to simply fill a u64 variable.
No data structures needed.

This simplifies the driver considerable and makes it much
easier to for example add support for big endian systems
later on.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191104142435.29960-16-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Remove the old API

The drivers now only use the new API, so removing the old one.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ajay Gupta <ajayg@nvi

usb: typec: ucsi: Remove the old API

The drivers now only use the new API, so removing the old one.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191104142435.29960-15-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Simplified registration and I/O API

Adding more simplified API for interface registration and
read and write operations.

The registration is split into separate creation and
regis

usb: typec: ucsi: Simplified registration and I/O API

Adding more simplified API for interface registration and
read and write operations.

The registration is split into separate creation and
registration phases. That allows the drivers to properly
initialize the interface before registering it if necessary.

The read and write operations are supplied in a completely
separate struct ucsi_operations that is passed to the
ucsi_register() function during registration. The new read
and write operations will work more traditionally so that
the read callback function reads a requested amount of data
from an offset, and the write callback functions write the
given data to the offset. The drivers will have to support
both non-blocking writing and blocking writing. In blocking
writing the driver itself is responsible of waiting for the
completion event.

The new API makes it possible for the drivers to perform
tasks also independently of the core ucsi.c, and that should
allow for example quirks to be handled completely in the
drivers without the need to touch ucsi.c.

The old API is kept until all drivers have been converted to
the new API.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Ajay Gupta <ajayg@nvidia.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191104142435.29960-12-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: ccg: enable runtime pm support

The change enables runtime pm support to UCSI CCG driver.
Added ucsi_resume() function to enable notification after
system reusme. Exported both ucsi

usb: typec: ucsi: ccg: enable runtime pm support

The change enables runtime pm support to UCSI CCG driver.
Added ucsi_resume() function to enable notification after
system reusme. Exported both ucsi_resume() and ucsi_send_command()
symbols in ucsi.c for modular build.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

show more ...

usb: typec: ucsi: Support for DisplayPort alt mode

This makes it possible to bind a driver to a DisplayPort
alt mode adapter devices.

The driver attempts to cope with the limitations of UCSI by
"em

usb: typec: ucsi: Support for DisplayPort alt mode

This makes it possible to bind a driver to a DisplayPort
alt mode adapter devices.

The driver attempts to cope with the limitations of UCSI by
"emulating" behaviour and attempting to guess things when
ever possible in order to satisfy the requirements the
standard DisplayPort alt mode driver has.

Tested-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Preliminary support for alternate modes

With UCSI the alternate modes, just like everything else
related to USB Type-C connectors, are handled in firmware.
The operating system can

usb: typec: ucsi: Preliminary support for alternate modes

With UCSI the alternate modes, just like everything else
related to USB Type-C connectors, are handled in firmware.
The operating system can see the status and is allowed to
request certain things, for example entering and exiting the
modes, but the support for alternate modes is very limited
in UCSI. The feature is also optional, which means that even
when the platform supports alternate modes, the operating
system may not be even made aware of them.

UCSI does not support direct VDM reading or writing.
Instead, alternate modes can be entered and exited using a
single custom command which takes also an optional SVID
specific configuration value as parameter. That means every
supported alternate mode has to be handled separately in
UCSI driver.

This commit does not include support for any specific
alternate mode. The discovered alternate modes are now
registered, but binding a driver to an alternate mode will
not be possible until support for that alternate mode is
added to the UCSI driver.

Tested-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.

For non */uapi/* files that summary was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139

and resulted in the first patch in this series.

If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:

SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930

and resulted in the second patch in this series.

- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:

SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1

and that resulted in the third patch in this series.

- when the two scanners agreed on the detected license(s), that became
the concluded license(s).

- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.

- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).

- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.

- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct

This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: include linux/device.h in ucsi.h

The new driver causes a build failure in some configurations:

In file included from /git/arm-soc/drivers/usb/typec/ucsi/trace.h:9:0,
fr

usb: typec: include linux/device.h in ucsi.h

The new driver causes a build failure in some configurations:

In file included from /git/arm-soc/drivers/usb/typec/ucsi/trace.h:9:0,
from /git/arm-soc/drivers/usb/typec/ucsi/trace.c:2:
drivers/usb/typec/ucsi/ucsi.h:331:39: error: 'struct device' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]

This includes the required header file.

Fixes: c1b0bc2dabfa ("usb: typec: Add support for UCSI interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: Add support for UCSI interface

UCSI - USB Type-C Connector System Software Interface - is a
specification that defines set of registers and data
structures for controlling the USB Type-C

usb: typec: Add support for UCSI interface

UCSI - USB Type-C Connector System Software Interface - is a
specification that defines set of registers and data
structures for controlling the USB Type-C ports. It's
designed for systems where an embedded controller (EC) is in
charge of the USB Type-C PHY or USB Power Delivery
controller. It is designed for systems with EC, but it is
not limited to them, and for example some USB Power Delivery
controllers will use it as their direct control interface.

With UCSI the EC (or USB PD controller) acts as the port
manager, implementing all USB Type-C and Power Delivery state
machines. The OS can use the interfaces for reading the
status of the ports and controlling basic operations like
role swapping.

The UCSI specification highlights the fact that it does not
define the interface method (PCI/I2C/ACPI/etc.).
Therefore the driver is implemented as library and every
supported interface method needs its own driver. Driver for
ACPI is provided in separate patch following this one.

The initial driver includes support for all required
features from UCSI specification version 1.0 (getting
connector capabilities and status, and support for power and
data role swapping), but none of the optional UCSI features
(alternate modes, power source capabilities, and cable
capabilities).

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Work around PPM losing change information

commit 217504a055325fe76ec1142aa15f14d3db77f94f upstream.

Some/many PPMs are simply clearing the change bitfield when a

usb: typec: ucsi: Work around PPM losing change information

commit 217504a055325fe76ec1142aa15f14d3db77f94f upstream.

Some/many PPMs are simply clearing the change bitfield when a
notification on a port is acknowledge. Unfortunately, doing so means
that any changes between the GET_CONNECTOR_STATUS and ACK_CC_CI commands
is simply lost.

Work around this by re-fetching the connector status afterwards. We can
then infer any changes that we see have happened but that may not be
respresented in the change bitfield.

We end up with the following actions:
1. UCSI_GET_CONNECTOR_STATUS, store result, update unprocessed_changes
2. UCSI_GET_CAM_SUPPORTED, discard result
3. ACK connector change
4. UCSI_GET_CONNECTOR_STATUS, store result
5. Infere lost changes by comparing UCSI_GET_CONNECTOR_STATUS results
6. If PPM reported a new change, then restart in order to ACK
7. Process everything as usual.

The worker is also changed to re-schedule itself if a new change
notification happened while it was running.

Doing this fixes quite commonly occurring issues where e.g. the UCSI
power supply would remain online even thought the ThunderBolt cable was
unplugged.

Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Link: https://lore.kernel.org/r/20201009144047.505957-3-benjamin@sipsolutions.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4

commit 1f4642b72be79757f050924a9b9673b6a02034bc upstream.

commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data

usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4

commit 1f4642b72be79757f050924a9b9673b6a02034bc upstream.

commit 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects
in PD mode") introduced retrieval of the PDOs when connected to a
PD-capable source. But only the first 4 PDOs are received since
that is the maximum number that can be fetched at a time given the
MESSAGE_IN length limitation (16 bytes). However, as per the PD spec
a connected source may advertise up to a maximum of 7 PDOs.

If such a source is connected it's possible the PPM could have
negotiated a power contract with one of the PDOs at index greater
than 4, and would be reflected in the request data object's (RDO)
object position field. This would result in an out-of-bounds access
when the rdo_index() is used to index into the src_pdos array in
ucsi_psy_get_voltage_now().

With the help of the UBSAN -fsanitize=array-bounds checker enabled
this exact issue is revealed when connecting to a PD source adapter
that advertise 5 PDOs and the PPM enters a contract having selected
the 5th one.

[ 151.545106][ T70] Unexpected kernel BRK exception at EL1
[ 151.545112][ T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
...
[ 151.545499][ T70] pc : ucsi_psy_get_prop+0x208/0x20c
[ 151.545507][ T70] lr : power_supply_show_property+0xc0/0x328
...
[ 151.545542][ T70] Call trace:
[ 151.545544][ T70] ucsi_psy_get_prop+0x208/0x20c
[ 151.545546][ T70] power_supply_uevent+0x1a4/0x2f0
[ 151.545550][ T70] dev_uevent+0x200/0x384
[ 151.545555][ T70] kobject_uevent_env+0x1d4/0x7e8
[ 151.545557][ T70] power_supply_changed_work+0x174/0x31c
[ 151.545562][ T70] process_one_work+0x244/0x6f0
[ 151.545564][ T70] worker_thread+0x3e0/0xa64

We can resolve this by instead retrieving and storing up to the
maximum of 7 PDOs in the con->src_pdos array. This would involve
two calls to the GET_PDOS command.

Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class")
Fixes: 4dbc6a4ef06d ("usb: typec: ucsi: save power data objects in PD mode")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Report power supply changes

When the ucsi power supply goes online/offline, and when the
power levels change, the power supply class needs to be
notified so it can

usb: typec: ucsi: Report power supply changes

When the ucsi power supply goes online/offline, and when the
power levels change, the power supply class needs to be
notified so it can inform the user space.

Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Vladimir Yerilov <openmindead@gmail.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201110120547.67922-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Fix the stub for ucsi_register_port_psy()

The stub was ucsi_register_port() when it should have been
ucsi_register_port_psy().

Cc: Abhilash K V <abhilash.k.v@i

usb: typec: ucsi: Fix the stub for ucsi_register_port_psy()

The stub was ucsi_register_port() when it should have been
ucsi_register_port_psy().

Cc: Abhilash K V <abhilash.k.v@intel.com>
Fixes: 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200427111246.4889-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: register with power_supply class

With this change the UCSI device will show up in
/sys/class/power_supply/. The following values are exported:
- online
- usb_ty

usb: typec: ucsi: register with power_supply class

With this change the UCSI device will show up in
/sys/class/power_supply/. The following values are exported:
- online
- usb_type
- voltage_min
- voltage_max
- voltage_now
- current_max
- current_now

Once a PD-capable type-C power source is connected to the system, GET_PDOS
UCSI command is used to query all source capabilities. Request data object
(RDO) is used to get current values.

Signed-off-by: K V, Abhilash <abhilash.k.v@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200423132058.6972-7-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: save power data objects in PD mode

When connected to a PD-capable power-source, read & save all partner
power data objects (PDOs) by using GET_PDOS UCSI command.
Al

usb: typec: ucsi: save power data objects in PD mode

When connected to a PD-capable power-source, read & save all partner
power data objects (PDOs) by using GET_PDOS UCSI command.
Also, save the current power contract in request data object (RDO)
for that connector.

Signed-off-by: K V, Abhilash <abhilash.k.v@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200423132058.6972-6-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Correct bit-mask for CCI

Bit 0 is reserved in CCI (Command Status & Connector Change Indicator)
register. So, change bit-mask for connector number field to 7..1
ins

usb: typec: ucsi: Correct bit-mask for CCI

Bit 0 is reserved in CCI (Command Status & Connector Change Indicator)
register. So, change bit-mask for connector number field to 7..1
instead of 7..0.
There would be no functional change since we were anyways right-shifing
by 1 bit.

Signed-off-by: K V, Abhilash <abhilash.k.v@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200423132058.6972-5-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi_ccg: workaround for NVIDIA test device

NVIDIA VirtualLink (svid 0x955) has two altmode, vdo=0x1 for
VirtualLink DP mode and vdo=0x3 for NVIDIA test mode. NVIDIA
test

usb: typec: ucsi_ccg: workaround for NVIDIA test device

NVIDIA VirtualLink (svid 0x955) has two altmode, vdo=0x1 for
VirtualLink DP mode and vdo=0x3 for NVIDIA test mode. NVIDIA
test device FTB (Function Test Board) reports altmode list with
vdo=0x3 first and then vdo=0x1. The list is:
SVID VDO
0xff01 0xc05
0x28de 0x8085
0x955 0x3
0x955 0x1

Current logic to assign mode value is based on order
in altmode list. This causes a mismatch of CON and SOP altmodes
since NVIDIA GPU connector has order of vdo=0x1 first and then
vdo=0x3. Fixing this by changing the order of vdo values
reported by NVIDIA test device. the new list will be:

SVID VDO
0xff01 0xc05
0x28de 0x8085
0x955 0x1085
0x955 0x3

Also NVIDIA VirtualLink (svid 0x955) uses pin E for display mode.
NVIDIA test device reports vdo of 0x1 so make sure vdo values
always have pin E assignement.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200310121912.57879-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: register DP only for NVIDIA DP VDO

NVIDIA VirtualLink (svid 0x955) has two altmode, vdo=0x1 for
VirtualLink DP mode and vdo=0x3 for NVIDIA test mode.
Register displ

usb: typec: ucsi: register DP only for NVIDIA DP VDO

NVIDIA VirtualLink (svid 0x955) has two altmode, vdo=0x1 for
VirtualLink DP mode and vdo=0x3 for NVIDIA test mode.
Register display altmode driver only for vdo=0x1

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200217144913.55330-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge 5.5-rc6 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: ucsi: Fix the notification bit offsets

The bit offsets for the Set Notification Enable command were
not considering the reserved bits in the middle.

Fixes: 470ce43a1

usb: typec: ucsi: Fix the notification bit offsets

The bit offsets for the Set Notification Enable command were
not considering the reserved bits in the middle.

Fixes: 470ce43a1a81 ("usb: typec: ucsi: Remove struct ucsi_control")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20200108131347.43217-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: add support for separate DP altmode devices

CCGx controller used on NVIDIA GPU card has two separate display
altmode for two DP pin assignments. UCSI specification does

usb: typec: ucsi: add support for separate DP altmode devices

CCGx controller used on NVIDIA GPU card has two separate display
altmode for two DP pin assignments. UCSI specification doesn't
prohibits using separate display altmode.

Current UCSI Type-C framework expects only one display altmode for
all DP pin assignment. This patch squashes two separate display
altmode into single altmode to support controllers with separate
display altmode. We first read all the alternate modes of connector
and then run through it to know if there are separate display
altmodes. If so, it prepares a new port altmode set after squashing
two or more separate altmodes into one.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230133431.63445-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

usb: typec: ucsi: Store the notification mask

The driver needs to ignore any Connector Change Events
before the Connector Change Indication notifications have
actually been enabled.

usb: typec: ucsi: Store the notification mask

The driver needs to ignore any Connector Change Events
before the Connector Change Indication notifications have
actually been enabled. This adds a check to
ucsi_connector_change() function to make sure the function
does not try to process the event unless the Connector
Change notifications have been enabled.

It is quite common that the firmware representing the "PPM"
(Platform Policy Manager) starts generating Connector Change
notifications even when only the Command Completion
notifications are enabled.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191230133431.63445-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...