usb serial: Add generic USB wwan support

The generic USB serial code is ill-suited for high-speed USB wwan devices,
resulting in the option driver. However, other non-option devices may also
gain si

usb serial: Add generic USB wwan support

The generic USB serial code is ill-suited for high-speed USB wwan devices,
resulting in the option driver. However, other non-option devices may also
gain similar benefits from not using the generic code. Factorise out the
non-option specific code from the option driver and make it available to
other users.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB Serial Driver: ZIO Motherboard

Add ZIO Motherboard USB serial interface driver.

Signed-off-by: Vijay Kumar B. <vijaykumar@zilogic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: qcaux: driver for auxiliary serial ports on Qualcomm devices

qcaux: add driver for QCDM-capable ports on various devices

Many Qualcomm-based devices provide a CDC-ACM port which accepts
normal

USB: qcaux: driver for auxiliary serial ports on Qualcomm devices

qcaux: add driver for QCDM-capable ports on various devices

Many Qualcomm-based devices provide a CDC-ACM port which accepts
normal AT commands and PPP connections. But they only provide one
which makes status or signal strength requests impossible while
PPP is active. They also provide secondary USB interfaces that
talk the Qualcomm Diagnostic Monitor (QCDM) protocol which can be
used for status and strength. Make those QCDM ports accessible.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: serial: Add support for ViVOtech ViVOpay devices.

Add support for USB serial interface provided by ViVOtech ViVOpay devices via
new driver vivopay-serial. Currently only the ViVOpay 8800 devic

USB: serial: Add support for ViVOtech ViVOpay devices.

Add support for USB serial interface provided by ViVOtech ViVOpay devices via
new driver vivopay-serial. Currently only the ViVOpay 8800 device is supported,
but support for similar devices can be added by adding the appropriate device
IDs to the driver.

Signed-off-by: Forest Bond <forest.bond@outpostembedded.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: serial: rename cp2101 driver to cp210x

Lots of users are getting confused about the cp2101 driver. It really
does support more than just the cp2101 device, so rename it to cp210x to
try to pre

USB: serial: rename cp2101 driver to cp210x

Lots of users are getting confused about the cp2101 driver. It really
does support more than just the cp2101 device, so rename it to cp210x to
try to prevent confusion.

Cc: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: serial: add qualcomm wireless modem driver

Driver originally written by Qualcomm, but rewritten by me due to the
totally different coding style. Cleaned up the probe logic to make a
bit more s

USB: serial: add qualcomm wireless modem driver

Driver originally written by Qualcomm, but rewritten by me due to the
totally different coding style. Cleaned up the probe logic to make a
bit more sense, this is one wierd device. They could have prevented all
of this by just writing sane firmware for the modem.

Cc: Tamm Liu <tamml@qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: serial: add symbol serial driver

This is for the Symbol 6608 barcode scanner in a fake "HID" mode.

Thanks to Dalibor Grgec for working with me to get this to start to work
properly.

Cc: Dalib

USB: serial: add symbol serial driver

This is for the Symbol 6608 barcode scanner in a fake "HID" mode.

Thanks to Dalibor Grgec for working with me to get this to start to work
properly.

Cc: Dalibor Grgec <dalibor.grgec@zemris.fer.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: add siemens_mpi usb-serial "stub" driver

This driver got rescued from a few years ago and was requested to be
added. So I cleaned it up, ported it to the latest kernel version and
here it is.

USB: add siemens_mpi usb-serial "stub" driver

This driver got rescued from a few years ago and was requested to be
added. So I cleaned it up, ported it to the latest kernel version and
here it is.

Cc: Thomas Hergenhahn <thomas.hergenhahn@suse.de>
Cc: Emmanuele <iemmav@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: add new opticon serial driver

This is for the serial mode of the Opticon barcode scanner.

Cc: Kees Stoop <kees.stoop@opticon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: delete airprime driver

This driver is only for one device id, and the option driver should be
used instead for it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: add new moto_modem driver for some Morotola phones

This should work on a KRZR K1m, and some other Motorola phones that do
not use the "standard" cdc ACM protocol to talk to USB hosts.

Tested-b

USB: add new moto_modem driver for some Morotola phones

This should work on a KRZR K1m, and some other Motorola phones that do
not use the "standard" cdc ACM protocol to talk to USB hosts.

Tested-by: Jeff Garzik <jeff@garzik.org>
Cc: Jiang Dejun <a5652c@motorola.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: add usb-serial spcp8x5 driver

Original version of the driver done by Linxb, changes by Harald, and
lots of cleanups by me in order to get it into a mergable state.

Cc: Linxb <xubin.lin@worldpl

USB: add usb-serial spcp8x5 driver

Original version of the driver done by Linxb, changes by Harald, and
lots of cleanups by me in order to get it into a mergable state.

Cc: Linxb <xubin.lin@worldplus.com.cn>
Cc: Harald Klein <hari@vt100.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: add iuu_phoenix driver

Signed-off-by: Alain Degreffe <eczema@ecze.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@su

USB: add iuu_phoenix driver

Signed-off-by: Alain Degreffe <eczema@ecze.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: Driver for CH341 USB-serial adaptor

This patch implements a USB serial port driver for the Winchiphead
CH341 USB-RS232 Converter. This chip also implements an IEEE 1284
parallel port, I2C and S

USB: Driver for CH341 USB-serial adaptor

This patch implements a USB serial port driver for the Winchiphead
CH341 USB-RS232 Converter. This chip also implements an IEEE 1284
parallel port, I2C and SPI, but that is not supported by the driver.

Signed-off-by: Frank A Kingswood <frank@kingswood-consulting.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: oti6858 usb-serial driver (in Nokia CA-42 cable)

Last week I've been searching for a driver for the CA-42 cable (see usb
below) that fitted my kernel 2.6.20. I only found an abandoned version

USB: oti6858 usb-serial driver (in Nokia CA-42 cable)

Last week I've been searching for a driver for the CA-42 cable (see usb
below) that fitted my kernel 2.6.20. I only found an abandoned version for a
driver on your website that indeed worked on 2.6.18 but wouldn't even
compile with a more recent 2.6.20 kernel.

I fiddled 2 evenings with the kernel code and have patched it up now to work
with the modifications in the 2.6.20 kernel. The patch is attached hereafter
and it works fine (at least for me :-) ).

Bus 2 Device 13: ID 0ea0:6858 Ours Technology, Inc.

I had to fiddle a little with the settings in .gnokiirc but that also
occurred with the older 2.6.18 kernel. Nevertheless, on one system with this
cable and my Nokia 6070 I had best results with :

model = 6510
connection = dku5

while on an other system with the same kernel, cable and phone it only worked
with :

model = AT
connection = serial
serial_write_usleep = 1


From: Kees Lemmens <C.W.J.Lemmens@ewi.tudelft.nl>
Cc: <pawel.kot@gmail.com>
Cc: <bozo@andrews.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: add driver for the USB debug devices

It's a simple usb-serial driver that just creates a tty device to read
and write from.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: add USB serial mos7720 driver

Add support for Moschip 7720 USB dual port usb to serial device.

This driver is originally based on the drivers/usb/io_edgeport.c driver.

Cleaned up and forward

USB: add USB serial mos7720 driver

Add support for Moschip 7720 USB dual port usb to serial device.

This driver is originally based on the drivers/usb/io_edgeport.c driver.

Cleaned up and forward ported by me.

Cc: VijayaKumar <vijaykumar@aspirecom.net>
Cc: AjayKumar <ajay@aspirecom.net>
Cc: Gurudeva <gurudev@aspirecom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: Moschip 7840 USB-Serial Driver

Signed-off-by: Paul B Schroeder <pschroeder@uplogix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add AIRcable USB Bluetooth Dongle Driver

Add driver for AIRcable USB Bluetooth dongle.

Signed-off-by: Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@

Add AIRcable USB Bluetooth Dongle Driver

Add driver for AIRcable USB Bluetooth dongle.

Signed-off-by: Naranjo, Manuel Francisco <naranjo.manuel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

USB: Let option driver handle Anydata CDMA modems. Remove anydata driver.

Signed-off-by: Jon K Hellan <hellan@acm.org>
Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Greg Kroa

USB: Let option driver handle Anydata CDMA modems. Remove anydata driver.

Signed-off-by: Jon K Hellan <hellan@acm.org>
Signed-Off-By: Matthias Urlichs <smurf@smurf.noris.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

[PATCH] USB: add driver for non-composite Sierra Wireless devices

This patch creates a new driver, sierra.c, that supports the new
non-composite Sierra Wireless WWAN devices. The older Sierra
Wirele

[PATCH] USB: add driver for non-composite Sierra Wireless devices

This patch creates a new driver, sierra.c, that supports the new
non-composite Sierra Wireless WWAN devices. The older Sierra
Wireless and Airprime devices are supported in airprime.c.

Signed-off-by: Kevin Lloyd <linux@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

[PATCH] USB: add ark3116 usb to serial driver

Based on Simon's original driver, with some minor code cleanups and
tidying by me.

Cc: Simon Schulz <simon@auctionant.de>
Signed-off-by: Greg Kroah-Har

[PATCH] USB: add ark3116 usb to serial driver

Based on Simon's original driver, with some minor code cleanups and
tidying by me.

Cc: Simon Schulz <simon@auctionant.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

[PATCH] USB: add driver for funsoft usb serial device

Cc: David Clare <david@funsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

[PATCH] USB serial: add navman driver

Thanks to Warren Lewis <wlewis@scn.org> for the information needed to
write the driver and for testing it out.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.d

[PATCH] USB serial: add navman driver

Thanks to Warren Lewis <wlewis@scn.org> for the information needed to
write the driver and for testing it out.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

[PATCH] USB: add the anydata usb-serial driver

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>