scsi: ufs: core: mcq: Enable multi-circular queue

Enable MCQ in the Host Controller.

Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewe

scsi: ufs: core: mcq: Enable multi-circular queue

Enable MCQ in the Host Controller.

Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Add completion support in poll

Complete CQE requests in poll. Assumption is that several poll completion
may happen in different CPUs for the same completion queue. Hence a spi

scsi: ufs: core: mcq: Add completion support in poll

Complete CQE requests in poll. Assumption is that several poll completion
may happen in different CPUs for the same completion queue. Hence a spin
lock protection is added.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: mcq: Add completion support of a CQE

Add support for completing requests from Completion Queue. Some host
controllers support vendor specific registers that provide a bitmap of all
CQs w

scsi: ufs: mcq: Add completion support of a CQE

Add support for completing requests from Completion Queue. Some host
controllers support vendor specific registers that provide a bitmap of all
CQs which have at least one completed CQE. Add this support. The MCQ
specification doesn't provide the Task Tag or its equivalent in the
Completion Queue Entry. So use an indirect method to find the Task Tag
from the Completion Queue Entry.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: Prepare for completion in MCQ

Modify completion path APIs and add completion queue entry.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc

scsi: ufs: core: Prepare for completion in MCQ

Modify completion path APIs and add completion queue entry.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Find hardware queue to queue request

Add support to find the hardware queue on which the request would be
queued. Since the very first queue is to serve device commands, an of

scsi: ufs: core: mcq: Find hardware queue to queue request

Add support to find the hardware queue on which the request would be
queued. Since the very first queue is to serve device commands, an offset
of 1 is added to the index of the hardware queue.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: Prepare ufshcd_send_command() for MCQ

Add support to send commands using multiple submission queues in MCQ mode.
Modify the functions that use ufshcd_send_command().

Co-developed-b

scsi: ufs: core: Prepare ufshcd_send_command() for MCQ

Add support to send commands using multiple submission queues in MCQ mode.
Modify the functions that use ufshcd_send_command().

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Use shared tags for MCQ mode

Enable shared tags for MCQ. For UFS, this should not have a huge
performance impact. It however simplifies the MCQ implementation and reuses
most o

scsi: ufs: core: mcq: Use shared tags for MCQ mode

Enable shared tags for MCQ. For UFS, this should not have a huge
performance impact. It however simplifies the MCQ implementation and reuses
most of the existing code in the issue and completion path. Also add
multiple queue mapping to map_queue().

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Configure operation and runtime interface

Runtime and operation registers are defined per Submission and Completion
queue. The location of these registers is not defined in th

scsi: ufs: core: mcq: Configure operation and runtime interface

Runtime and operation registers are defined per Submission and Completion
queue. The location of these registers is not defined in the spec; meaning
the offsets and stride may vary for different HC vendors. Establish the
stride, base address, and doorbell address offsets from vendor host driver
and program it.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Allocate memory for MCQ mode

To read the bqueuedepth, the device descriptor is fetched in Single
Doorbell Mode. This allocated memory may not be enough for MCQ mode because
the

scsi: ufs: core: mcq: Allocate memory for MCQ mode

To read the bqueuedepth, the device descriptor is fetched in Single
Doorbell Mode. This allocated memory may not be enough for MCQ mode because
the number of tags supported in MCQ mode may be larger than in SDB mode.
Hence, release the memory allocated in SDB mode and allocate memory for MCQ
mode operation. Define the UFS hardware queue and Completion Queue Entry.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Calculate queue depth

The UFS device defines the supported queuedepth by bqueuedepth which has a
max value of 256. The HC defines MAC (Max Active Commands) that defines
the ma

scsi: ufs: core: mcq: Calculate queue depth

The UFS device defines the supported queuedepth by bqueuedepth which has a
max value of 256. The HC defines MAC (Max Active Commands) that defines
the max number of commands that in flight to the UFS device. Calculate and
configure the nutrs based on both these values.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Configure resource regions

Define the MCQ resources and add support to ioremap the resource regions.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <q

scsi: ufs: core: mcq: Configure resource regions

Define the MCQ resources and add support to ioremap the resource regions.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: mcq: Add support to allocate multiple queues

Multi-circular queue (MCQ) has been added in UFSHC v4.0 standard in
addition to the Single Doorbell mode. The MCQ mode supports multipl

scsi: ufs: core: mcq: Add support to allocate multiple queues

Multi-circular queue (MCQ) has been added in UFSHC v4.0 standard in
addition to the Single Doorbell mode. The MCQ mode supports multiple
submission and completion queues. Add support to allocate and configure
the queues. Add module parameters support to configure the queues.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: Defer adding host to SCSI if MCQ is supported

If MCQ support is present, enabling it after MCQ support has been
configured would require reallocating tags and memory. It would also

scsi: ufs: core: Defer adding host to SCSI if MCQ is supported

If MCQ support is present, enabling it after MCQ support has been
configured would require reallocating tags and memory. It would also free
up the already allocated memory in Single Doorbell Mode. So defer invoking
scsi_add_host() until MCQ is configured.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: Introduce multi-circular queue capability

Add support to check for MCQ capability in the UFSHC. Add a module
parameter to disable MCQ if needed.

Co-developed-by: Can Guo <quic_can

scsi: ufs: core: Introduce multi-circular queue capability

Add support to check for MCQ capability in the UFSHC. Add a module
parameter to disable MCQ if needed.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: Probe for EXT_IID support

Task Tag is limited to 8 bits and this restricts the number of active I/Os
to 255. In multi-circular queue mode, this may not be enough. The
specificatio

scsi: ufs: core: Probe for EXT_IID support

Task Tag is limited to 8 bits and this restricts the number of active I/Os
to 255. In multi-circular queue mode, this may not be enough. The
specification provides EXT_IID which can be used to increase the number of
I/Os if the UFS device and UFSHC support it. This patch adds support to
probe for EXT_IID support in UFS device and UFSHC.

Co-developed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Asutosh Das <quic_asutoshd@quicinc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: bsg: Fix sometimes-uninitialized warnings

Compilation complains that two possible variables are used without
initialization:

drivers/ufs/core/ufs_bsg.c:112:6: warning: variable 'sg

scsi: ufs: core: bsg: Fix sometimes-uninitialized warnings

Compilation complains that two possible variables are used without
initialization:

drivers/ufs/core/ufs_bsg.c:112:6: warning: variable 'sg_cnt' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
drivers/ufs/core/ufs_bsg.c:112:6: warning: variable 'sg_list' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]

Fix both warnings by adding initialization with sg_cnt = 0, sg_list = NULL.

Fixes: 6ff265fc5ef6 ("scsi: ufs: core: bsg: Add advanced RPMB support in ufs_bsg")
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Xiaosen He <quic_xiaosenh@quicinc.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

Merge patch series "ufs: qcom: Add HS-G4 support"

Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:

This series adds HS-G4 support to the Qcom UFS driver and PHY driver.
The newer Qcom

Merge patch series "ufs: qcom: Add HS-G4 support"

Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> says:

This series adds HS-G4 support to the Qcom UFS driver and PHY driver.
The newer Qcom platforms support configuring the UFS controller and
PHY in dual gears (i.e., controller/PHY can be configured to run in
two gear speeds). This is accomplished by adding two different PHY
init sequences to the PHY driver and the UFS driver requesting the one
that's required based on the platform configuration.

Initially the ufs-qcom driver will use the default gear G2 for
enumerating the UFS device. Afer enumeration, the max gear supported
by both the controller and device would be found out and that will be
used thereafter. But for using the max gear after enumeration, the
ufs-qcom driver requires the UFS device to be reinitialized. For this
purpose, a separate quirk has been introduced in the UFS core along
with a callback and those will be used by the ufs-qcom driver.

This series has been tested on following platforms:

* Qcom RB5 development platform powered by SM8250 SoC
* SM8450 based dev board
* Qdrive3/sa8540p-ride board based on SC8280XP (derivative)

Link: https://lore.kernel.org/r/20221222141001.54849-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: ufs-qcom: Add support for finding max gear on new platforms

Starting from Qcom UFS version 4.0, vendor specific REG_UFS_PARAM0 register
can be used to determine the maximum gear supported

scsi: ufs: ufs-qcom: Add support for finding max gear on new platforms

Starting from Qcom UFS version 4.0, vendor specific REG_UFS_PARAM0 register
can be used to determine the maximum gear supported by the controller.

Suggested-by: Can Guo <quic_cang@quicinc.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device

Starting from Qualcomm UFS version 4, the UFS device needs to be
reinitialized after switching to maximum gear by the UFS core. Hen

scsi: ufs: ufs-qcom: Add support for reinitializing the UFS device

Starting from Qualcomm UFS version 4, the UFS device needs to be
reinitialized after switching to maximum gear by the UFS core. Hence, add
support for it by enabling the UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH
quirk, implementing reinit_notify() callback and using the agreed gear
speed for setting the PHY mode.

Suggested-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear

In the preparation of adding support for new gears, move the logic that
finds the gear for each platform to a new function. This helps w

scsi: ufs: ufs-qcom: Factor out the logic finding the HS Gear

In the preparation of adding support for new gears, move the logic that
finds the gear for each platform to a new function. This helps with code
readability and also allows the logic to be used in other places of the
driver in future.

While at it, make it clear that this driver only supports symmetric gear
setting (hs_tx_gear == hs_rx_gear).

Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: Add support for reinitializing the UFS device

Some platforms like Qcom, requires the UFS device to be reinitialized after
switching to maximum gear speed. So add support for that in

scsi: ufs: core: Add support for reinitializing the UFS device

Some platforms like Qcom, requires the UFS device to be reinitialized after
switching to maximum gear speed. So add support for that in UFS core by
introducing a new quirk (UFSHCD_CAP_REINIT_AFTER_MAX_GEAR_SWITCH) and doing
the reinitialization, if the quirk is enabled by the controller driver.

Suggested-by: Can Guo <quic_cang@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: core: Add reinit_notify() callback

reinit_notify() callback can be used by the UFS controller drivers to
perform changes required for UFSHCD reinit that can happen during max gear
switch.

scsi: ufs: core: Add reinit_notify() callback

reinit_notify() callback can be used by the UFS controller drivers to
perform changes required for UFSHCD reinit that can happen during max gear
switch.

Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0

On newer UFS revisions, the register at offset 0xD0 is called,
REG_UFS_PARAM0. Since the existing register, RETRY_TIMER_REG is not use

scsi: ufs: ufs-qcom: Fix the Qcom register name for offset 0xD0

On newer UFS revisions, the register at offset 0xD0 is called,
REG_UFS_PARAM0. Since the existing register, RETRY_TIMER_REG is not used
anywhere, it is safe to use the new name.

Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error

Make use of dev_err_probe() for printing the probe error.

Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Da

scsi: ufs: ufs-qcom: Use dev_err_probe() for printing probe error

Make use of dev_err_probe() for printing the probe error.

Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: ufs: ufs-qcom: Use bitfields where appropriate

Use bitfield macros where appropriate to simplify the driver.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Asutosh D

scsi: ufs: ufs-qcom: Use bitfields where appropriate

Use bitfield macros where appropriate to simplify the driver.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...