target: fix DPO and FUA bit checks

Drivers may override the WCE flag, in which case the DPOFUA flag in
MODE SENSE might differ from the check used to reject invalid FUA
bits in sbc_c

target: fix DPO and FUA bit checks

Drivers may override the WCE flag, in which case the DPOFUA flag in
MODE SENSE might differ from the check used to reject invalid FUA
bits in sbc_check_dpofua. Also now that we reject invalid FUA
bits early there is no need to duplicate the same buggy check
down in the fileio code.

As the DPOFUA flag controls th support for FUA bits on read and
write commands as well as DPO key off all the checks off a single
helper, and deprecate the emulate_dpo and emulate_fua_read attributs.

This fixes various failures in the libiscsi testsuite.

Personally I'd prefer to also remove the emulate_fua_write attribute
as there is no good reason to disable it, but I'll leave that for
a separate discussion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem

There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference

target: Fix se_tpg_tfo->tf_subsys regression + remove tf_subsystem

There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference it from the core code
instead of passing pointers to it around.

This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e6,
where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would
fail, because the assignment from the original target_core_subsystem[]
is no longer happening at target_register_template() time.

(Fix target_core_exit_configfs pointer dereference - Sagi)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: move external declarations to a headers

We should not declare extrnal .c symbols in C files to make sure they
match the actual prototype, and sparse correctly warns about this.

target: move external declarations to a headers

We should not declare extrnal .c symbols in C files to make sure they
match the actual prototype, and sparse correctly warns about this.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Add EXPORT_SYMBOL for existing se_dev_set_*

Now that target_core_backend_configfs.h macros will be using these
se_dev_set attribute functions externally to allow backend drivers

target: Add EXPORT_SYMBOL for existing se_dev_set_*

Now that target_core_backend_configfs.h macros will be using these
se_dev_set attribute functions externally to allow backend drivers
to populate different attributes, go ahead and add EXPORT_SYMBOL()
for the existing default set of 30 device attributes.

Also update target_core_backend.h with proper function prototypes.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Add force_pr_aptpl device attribute

This patch adds a force_pr_aptpl device attribute used to force SPC-3 PR
Activate Persistence across Target Power Loss (APTPL) operation. Thi

target: Add force_pr_aptpl device attribute

This patch adds a force_pr_aptpl device attribute used to force SPC-3 PR
Activate Persistence across Target Power Loss (APTPL) operation. This
makes PR metadata write-out occur during state change regardless if new
PERSISTENT_RESERVE_OUT CDBs have their APTPL feature bit set.

This is useful during H/A failover in active/passive setups where all PR
state is being re-created on a different node, driven by configfs backend
device + export layout and pre-loaded $DEV/pr/res_aptpl_metadata.

Cc: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Change core_dev_del_lun to take a se_lun instead of unpacked_lun

Remove core_tpg_pre_dellun entirely, since we don't need to get/check
a pointer we already have.

Nothing

target: Change core_dev_del_lun to take a se_lun instead of unpacked_lun

Remove core_tpg_pre_dellun entirely, since we don't need to get/check
a pointer we already have.

Nothing else can return an error, so core_dev_del_lun can return void.

Rename core_tpg_post_dellun to remove_lun - a clearer name, now that
pre_dellun is gone.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: core_tpg_post_dellun can return void

Nothing in it can raise an error.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Grover <agrover@redhat.com>
Si

target: core_tpg_post_dellun can return void

Nothing in it can raise an error.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target/configfs: Expose protection device attributes

This patch adds support for exposing DIF protection device
attributes via configfs. This includes:

pi_prot_type: Protect

target/configfs: Expose protection device attributes

This patch adds support for exposing DIF protection device
attributes via configfs. This includes:

pi_prot_type: Protection Type (0, 1, 3 currently support)
pi_prot_format: Protection Format Operation (FILEIO only)

Within se_dev_set_pi_prot_type() it also adds the se_subsystem_api
device callbacks to setup per device protection information.

v2 changes:
- Drop pi_guard_type + pi_prot_version related code (MKP)
- Add pi_prot_format logic (Sagi)
- Add ->free_prot callback in target_free_device
- Add hw_pi_prot_type read-only attribute

Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Don't use void* when passing dev in core_tpg_add_lun

Especially since it's actually a device.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bel

target: Don't use void* when passing dev in core_tpg_add_lun

Especially since it's actually a device.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Rename core_tpg_{pre,post}_addlun for clarity

"pre" is really an allocation function. The only time it isn't called is
for virtual_lun0, which is statically allocated. Renaming t

target: Rename core_tpg_{pre,post}_addlun for clarity

"pre" is really an allocation function. The only time it isn't called is
for virtual_lun0, which is statically allocated. Renaming that to "alloc"
lets the other function not need to be "post", and just be called
core_tpg_add_lun.

(nab: fix minor applying fuzz in core_tpg_setup_virtual_lun0)

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Add percpu refcounting for se_lun access

This patch adds percpu refcounting for se_lun access that allows the
association of an se_lun + se_cmd in transport_lookup_cmd_lun() to

target: Add percpu refcounting for se_lun access

This patch adds percpu refcounting for se_lun access that allows the
association of an se_lun + se_cmd in transport_lookup_cmd_lun() to
occur without an extra list_head for tracking outstanding I/O during
se_lun shutdown.

This effectively changes se_lun shutdown logic to wait for outstanding
I/O percpu references to complete in transport_lun_remove_cmd() using
se_lun->lun_ref_comp, instead of explicitly draining the per se_lun
command list and waiting for individual se_cmd descriptor processing
to complete.

Cc: Kent Overstreet <kmo@daterainc.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Export symbol core_tpg_check_initiator_node_acl

Export symbol core_tpg_check_initiator_node_acl and move prototype from the
private drivers/target/target_core_internal.h to the p

target: Export symbol core_tpg_check_initiator_node_acl

Export symbol core_tpg_check_initiator_node_acl and move prototype from the
private drivers/target/target_core_internal.h to the public
include/target/target_core_fabric.h

Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Add Third Party Copy (3PC) bit in INQUIRY response

This patch adds the Third Party Copy (3PC) bit to signal support
for EXTENDED_COPY within standard inquiry response data.

target: Add Third Party Copy (3PC) bit in INQUIRY response

This patch adds the Third Party Copy (3PC) bit to signal support
for EXTENDED_COPY within standard inquiry response data.

Also add emulate_3pc device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Zach Brown <zab@redhat.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>

show more ...

target: Add MAXIMUM COMPARE AND WRITE LENGTH in Block Limits VPD

This patch adds the MAXIMUM COMPARE AND WRITE LENGTH bit, currently
hardcoded to a single logical block (NoLB=1) within t

target: Add MAXIMUM COMPARE AND WRITE LENGTH in Block Limits VPD

This patch adds the MAXIMUM COMPARE AND WRITE LENGTH bit, currently
hardcoded to a single logical block (NoLB=1) within the Block Limits
VPD in spc_emulate_evpd_b0().

Also add emulate_caw device attribute in configfs (enabled by default)
to allow the exposure of this bit to be disabled, if necessary.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Martin Petersen <martin.petersen@oracle.com>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: James Bottomley <JBottomley@Parallels.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@daterainc.com>

show more ...

target: Remove unused struct members in se_dev_entry

Some were incremented, but never used anywhere from what I could tell.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signe

target: Remove unused struct members in se_dev_entry

Some were incremented, but never used anywhere from what I could tell.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Fix lookup of dynamic NodeACLs during cached demo-mode operation

This patch fixes a bug in core_tpg_check_initiator_node_acl() ->
core_tpg_get_initiator_node_acl() where a dynami

target: Fix lookup of dynamic NodeACLs during cached demo-mode operation

This patch fixes a bug in core_tpg_check_initiator_node_acl() ->
core_tpg_get_initiator_node_acl() where a dynamically created
se_node_acl generated during session login would be skipped during
subsequent lookup due to the '!acl->dynamic_node_acl' check, causing
a new se_node_acl to be created with a duplicate ->initiatorname.

This would occur when a fabric endpoint was configured with
TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1
preventing the release of an existing se_node_acl during se_session
shutdown.

Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl()
within core_dev_init_initiator_node_lun_acl() that originally
required the extra '!acl->dynamic_node_acl' check, and just pass
the configfs provided se_node_acl pointer instead.

Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Add device attribute to expose config_item_name for INQUIRY model

This patch changes LIO to use the configfs backend device name as the
model if you echo '1' to an individual dev

target: Add device attribute to expose config_item_name for INQUIRY model

This patch changes LIO to use the configfs backend device name as the
model if you echo '1' to an individual device's emulate_model_alias attribute.
This is a valid operation only on devices with an export count of 0.

Signed-off-by: Tregaron Bayly <tbayly@bluehost.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Add/check max_write_same_len device attribute + update block limits VPD

This patch adds a new max_write_same_len device attribute for use with
WRITE_SAME w/ UNMAP=0 backend emula

target: Add/check max_write_same_len device attribute + update block limits VPD

This patch adds a new max_write_same_len device attribute for use with
WRITE_SAME w/ UNMAP=0 backend emulation. This can be useful for
lowering the default backend value (IBLOCK uses 0xFFFF).

Also, update block limits VPD emulation code in spc_emulate_evpd_b0() to
report MAXIMUM WRITE SAME LENGTH, and enforce max_write_same_len during
sbc_parse() -> sbc_setup_write_same() CDB sanity checking for all emulated
WRITE_SAME w/ UNMAP=0 cases.

(Robert: Move max_write_same_len check in sbc_setup_write_same() to
check both WRITE_SAME w/ UNMAP=1 and w/ UNMAP=0 cases)

Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Robert Elliott <Elliott@hp.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: pass sense_reason as a return value

Pass the sense reason as an explicit return value from the I/O submission
path instead of storing it in struct se_cmd and using negative retur

target: pass sense_reason as a return value

Pass the sense reason as an explicit return value from the I/O submission
path instead of storing it in struct se_cmd and using negative return
values. This cleans up a lot of the code pathes, and with the sparse
annotations for the new sense_reason_t type allows for much better
error checking.

(nab: Convert spc_emulate_modesense + spc_emulate_modeselect to use
sense_reason_t with Roland's MODE SELECT changes)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: move REPORT LUNS emulation to target_core_spc.c

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: kill struct se_subsystem_dev

Simplify the code a lot by killing the superflous struct se_subsystem_dev.
Instead se_device is allocated early on by the backend driver, which alloc

target: kill struct se_subsystem_dev

Simplify the code a lot by killing the superflous struct se_subsystem_dev.
Instead se_device is allocated early on by the backend driver, which allocates
it as part of its own per-device structure, borrowing the scheme that is for
example used for inode allocation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: refactor core_update_device_list_for_node()

Code was almost entirely divided based on value of bool param "enable".

Split it into two functions.

Signed-off-by: Andy

target: refactor core_update_device_list_for_node()

Code was almost entirely divided based on value of bool param "enable".

Split it into two functions.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: Remove hba param from core_dev_add_lun

Only used in a debugprint, and function signature is cleaner now.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: N

target: Remove hba param from core_dev_add_lun

Only used in a debugprint, and function signature is cleaner now.

Signed-off-by: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: remove the execute list

Since "target: Drop se_device TCQ queue_depth usage from I/O path" we always
submit all commands (or back then, tasks) from __transport_execute_tasks.

target: remove the execute list

Since "target: Drop se_device TCQ queue_depth usage from I/O path" we always
submit all commands (or back then, tasks) from __transport_execute_tasks.

That means the the execute list has lots its purpose, as we can simply
submit the commands that are restarted in transport_complete_task_attr
directly while we walk the list. In fact doing so also solves a race
in the way it currently walks to delayed_cmd_list as well.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...

target: move code for CDB emulation

Move the existing code in target_core_cdb.c into the files for the command
sets that the emulations implement.

(roland + nab: Squash patch: F

target: move code for CDB emulation

Move the existing code in target_core_cdb.c into the files for the command
sets that the emulations implement.

(roland + nab: Squash patch: Fix range calculation in WRITE SAME emulation
when num blocks == 0s)

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

show more ...