staging:iio:adc: Add SPEAr ADC driver

This patch implements the basic single data conversion support for
the SPEAr600 SoC ADC. The register layout of SPEAr600 differs a bit
from other SPEAr SoC vari

staging:iio:adc: Add SPEAr ADC driver

This patch implements the basic single data conversion support for
the SPEAr600 SoC ADC. The register layout of SPEAr600 differs a bit
from other SPEAr SoC variants (e.g. SPEAr3xx). These differences are
handled via DT compatible testing. Resulting in a multi-arch binary.

This driver is currently tested only on SPEAr600. Future patches may add
support for other SoC variants (SPEAr3xx) and features like software
buffer or DMA.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

staging: iio: LPC32xx: ADC driver

This patch adds a 3-channel ADC driver for the LPC32xx ARM SoC

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed

staging: iio: LPC32xx: ADC driver

This patch adds a 3-channel ADC driver for the LPC32xx ARM SoC

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

iio: adc: Relocate Capacitance to Digital Converters (CDC) into own subdir

No functional changes.
Fix Kconfig description.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by:

iio: adc: Relocate Capacitance to Digital Converters (CDC) into own subdir

No functional changes.
Fix Kconfig description.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

iio: adc: remove ADT75 driver - hwmon/lm75 will take over ADT75 support

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Gr

iio: adc: remove ADT75 driver - hwmon/lm75 will take over ADT75 support

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging:iio:adc:ad7314 removal. Supported via hwmon.

Driver ported over to hwmon where it fits much better.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.he

staging:iio:adc:ad7314 removal. Supported via hwmon.

Driver ported over to hwmon where it fits much better.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging:iio: tree wide IIO_RING_BUFFER config symbol to IIO_BUFFER

Functionality is generic, so name is missleading.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hart

staging:iio: tree wide IIO_RING_BUFFER config symbol to IIO_BUFFER

Functionality is generic, so name is missleading.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: Replace, rewrite ad7745 from scratch.

The existing ad7745 driver didn't conform with the IIO spec for such devices.
It was way simpler to rewrite the existing driver, than actuall

staging: iio: adc: Replace, rewrite ad7745 from scratch.

The existing ad7745 driver didn't conform with the IIO spec for such devices.
It was way simpler to rewrite the existing driver, than actually fixing it.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

IIO: ADC: New driver for AD7190/AD7192/AD7195 4 Channel SPI ADC

New driver for AD7190/AD7192/AD7195 4.8 kHz, Ultralow Noise, 24-Bit
Sigma-Delta ADC with PGA

These devices features a dual use data o

IIO: ADC: New driver for AD7190/AD7192/AD7195 4 Channel SPI ADC

New driver for AD7190/AD7192/AD7195 4.8 kHz, Ultralow Noise, 24-Bit
Sigma-Delta ADC with PGA

These devices features a dual use data out ready DOUT/RDY output.
In order to avoid contentions on the SPI bus, it's necessary to use
spi bus locking. The DOUT/RDY output must also be wired to an
interrupt capable GPIO.

In INDIO_RING_TRIGGERED mode, this driver may block its SPI bus segment
for an extended period of time.

Changes since V1:

Add missing documentation.
Remove obsoleted include files.
Fix typos and style issues.
Fix buffer size.
Split ad7192_show() into two functions.
Avoid race condition add mutex.
Abandon IIO_CHAN macro.
Reorder elements in ad7192_platform_data.
Remove driver bus type.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

iio: adc: New driver for AD7280A Lithium Ion Battery Monitoring System

The AD7280A monitoring system contains all the functions required for
general purpose monitoring and maintenance of stacked
lit

iio: adc: New driver for AD7280A Lithium Ion Battery Monitoring System

The AD7280A monitoring system contains all the functions required for
general purpose monitoring and maintenance of stacked
lithium ion batteries as used in hybrid electric vehicles,
battery backup applications, etc.

Changes since V1:

Make cell channels all type IIO_IN_DIFF, update documentation accordingly.
Remove unused and redundant defines.
Use SI units where applicable.
Remove unnecessary wrapper function.
Remove redundant initialization.
Add comments where requested.
Revise event handler.
Use const where applicable.

Changes since V2:

Remove redundant adc.h include file, scheduled for removal.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC

New driver for AD7792/AD7793 3-Channel, Low Noise,
Low Power, 16-/24-Bit Sigma-Delta ADC with On-Chip In-Amp
and Reference.

The AD7792/AD779

IIO: ADC: New driver for AD7792/AD7793 3 Channel SPI ADC

New driver for AD7792/AD7793 3-Channel, Low Noise,
Low Power, 16-/24-Bit Sigma-Delta ADC with On-Chip In-Amp
and Reference.

The AD7792/AD7793 features a dual use data out ready DOUT/RDY output.
In order to avoid contentions on the SPI bus, it's necessary to use
spi bus locking. The DOUT/RDY output must also be wired to an
interrupt capable GPIO.

In INDIO_RING_TRIGGERED mode, this driver may block its SPI bus segment
for an extended period of time.

Changes since V1:

Use bool where applicable.
Use data buffer that lives in their own cache line.
Restructure ad7793_calibrate_all to use an array.
Use msleep.
Query REG_ID instead of doing a write/read This is a test.
Add support for unipolar mode.
Drop range attribute in favor of write scale.
Add proper locking.
Use new validate_trigger callbacks.
Use IIO_IN_DIFF for differential channels.
Change attribute naming.
Use available_scan_masks.
Some other miscellaneous cleanup (none functional changes).

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: IIO: ADC: New driver for the AD7780 / AD7781 24-bit Sigma-Delta ADC

Changes since v1:

IIO: ADC: AD7780: Apply review feedback

Abort probe() with error in case platform_data is not present

staging: IIO: ADC: New driver for the AD7780 / AD7781 24-bit Sigma-Delta ADC

Changes since v1:

IIO: ADC: AD7780: Apply review feedback

Abort probe() with error in case platform_data is not present.
Add comment explaining power down reset (PDRST) GPIO handling
and dual function DOUT/RDY interrupt usage.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

IIO: ADC: New driver for the AD7298 8-channel SPI ADC

This patch adds support for the
AD7298: 8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor
via SPI bus.

This patch replaces the existing

IIO: ADC: New driver for the AD7298 8-channel SPI ADC

This patch adds support for the
AD7298: 8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor
via SPI bus.

This patch replaces the existing ad7298.c driver completely.
It was necessary since, the old driver did not comply with the
IIO ABI for such devices.

Changes since V1:
IIO: ADC: New driver for the AD7298 8-channel SPI ADC

Add documentation for new sysfs file tempX_input.
Simplify bit defines.
Remove outdated comments.
Fix indention style.
ad7298_show_temp():
Add locking.
Simplify temperature calculation.
Change temperature result from degrees into milli degrees Celsius.
Rename file according to new sysfs ABI documentation

Add timestamp attributes.
Revise timestamp handling accordingly.
Preset timestamp generation.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Reviewed-by: Shubhrajyoti <Shubhrajyoti@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4

This patch adds support for the:
AD7606/AD7606-6/AD7606-4 8/6/4-Channel Data Acquisition
system (DAS) with 16-Bit, Bipolar, Simultaneous Sa

staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4

This patch adds support for the:
AD7606/AD7606-6/AD7606-4 8/6/4-Channel Data Acquisition
system (DAS) with 16-Bit, Bipolar, Simultaneous Sampling ADC.

Changes since V1:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback

Rename sysfs node oversampling to oversampling_ratio.
Kconfig: Add GPIOLIB dependency.
Use range in mV to better match HWMON.
Rename ad7606_check_oversampling.
Fix various comments and style.
Reorder is_visible cases.
Use new gpio_request_one/array and friends.
Drop check for SPI max_speed_hz.

Changes since V2:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback

Documentation: specify unit
Avoid raise condition in ad7606_scan_direct()
Check return value of bus ops read_block()

Changes since V3:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Add missing include file

Add linux/sched.h

Changes since V4:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Fix kconfig declaration

consistently use tristate to avoid configuration mismatches

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: Enable driver support for ad7887 AD converter

Enable support for AD7887: SPI Micropower, 2-Channel, 125 kSPS, 12-Bit ADC

staging: iio: adc: Fix according to review feedback

Rev

staging: iio: adc: Enable driver support for ad7887 AD converter

Enable support for AD7887: SPI Micropower, 2-Channel, 125 kSPS, 12-Bit ADC

staging: iio: adc: Fix according to review feedback

Review feedback by Jonathan Cameron:
Combine statements.
Document struct members.
Remove redundant variable initialization.
Simplify multichannel scan from ring logic.
Fix coding style.

[v2]
staging: iio: adc: ad7887: Fix typos

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for ADT7410 temperature sensors

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan C

staging: iio: adc: new driver for ADT7410 temperature sensors

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for ADT7310 temperature sensors

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan C

staging: iio: adc: new driver for ADT7310 temperature sensors

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for ADT75 temperature sensors

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cam

staging: iio: adc: new driver for ADT75 temperature sensors

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for AD7816 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23

staging: iio: adc: new driver for AD7816 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for AD7745/6/7 devices

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic

staging: iio: adc: new driver for AD7745/6/7 devices

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for AD7314 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23

staging: iio: adc: new driver for AD7314 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for AD7298 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23

staging: iio: adc: new driver for AD7298 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for AD7291 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23

staging: iio: adc: new driver for AD7291 devices

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for AD7152/3 devices

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23

staging: iio: adc: new driver for AD7152/3 devices

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: new driver for AD7150/1/6 devices

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic

staging: iio: adc: new driver for AD7150/1/6 devices

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...

staging: iio: adc: ad7476 new SPI ADC driver

New driver handling:
AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495
SPI micropower and high speed 12-/10-/8-Bit ADCs

staging: iio: adc:

staging: iio: adc: ad7476 new SPI ADC driver

New driver handling:
AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495
SPI micropower and high speed 12-/10-/8-Bit ADCs

staging: iio: adc: ad7476 apply list review feedback by Jonathan Cameron

Changes since last RFC post V1:
Mainly list review feedback by Jonathan Cameron

-Remove scan_attrs from chip info structure.
-Remove name from chip info structure, use new spi_device_id instead.
-Allow transfer buffers to live in their own cache lines, to avoid DMA/cache coherency issues.
-Move scan el code into the ring buffer file.
-Use helper function to alloc the pollfunc.
-Use regulator framework and get vref_mv from the regulator in case not specified by pdata.
-Devices with buit-in reference use vref from the chip info structure
-Don't error on missing platform_data

-Make vref_mv type unsigned short
-Print in_scale "Vref / 2^(bits)" if fractional.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

show more ...