spi: Replace all spi->chip_select and spi->cs_gpiod references with function call

Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an ar

spi: Replace all spi->chip_select and spi->cs_gpiod references with function call

Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers
Reviewed-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver
Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi
Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver
Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part
Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: mpc52xx: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error

spi: mpc52xx: Convert to platform remove callback returning void

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230303172041.2103336-41-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: mpc52xx: Replace NO_IRQ by 0

NO_IRQ is used to check the return of irq_of_parse_and_map().

On some architecture NO_IRQ is 0, on other architectures it is -1.

irq_of_parse_and_map() returns 0

spi: mpc52xx: Replace NO_IRQ by 0

NO_IRQ is used to check the return of irq_of_parse_and_map().

On some architecture NO_IRQ is 0, on other architectures it is -1.

irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ.

So use 0 instead of using NO_IRQ.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/f41e09d710879726eacb98daedf16d0847303b9b.1665034444.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: spi-mpc52xx: switch to using gpiod API

This switches the driver to use gpiod API instead of legacy gpio API,
which will brings us close to removing of_get_gpio() and other
OF-specific old APIs.

spi: spi-mpc52xx: switch to using gpiod API

This switches the driver to use gpiod API instead of legacy gpio API,
which will brings us close to removing of_get_gpio() and other
OF-specific old APIs.

No functional change intended beyond some differences in error messages.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/Yy07WbMAG4bPgYNd@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: mpc52xx: Replace of_gpio_count() by gpiod_count()

As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.

Signed-off-by: Andy Shevchenko <andriy.sh

spi: mpc52xx: Replace of_gpio_count() by gpiod_count()

As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220914153333.37701-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode

Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help
cleaning up other parts of the kernel from OF specific code.

No f

powerpc/mpc5xxx: Switch mpc5xxx_get_bus_frequency() to use fwnode

Switch mpc5xxx_get_bus_frequency() to use fwnode in order to help
cleaning up other parts of the kernel from OF specific code.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # for i2c-mpc
Acked-by: Wolfram Sang <wsa@kernel.org> # for the I2C part
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for mscan/mpc5xxx_can
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220507100147.5802-2-andriy.shevchenko@linux.intel.com

show more ...

spi: Prepare cleanup of powerpc's asm/prom.h

powerpc's asm/prom.h brings some headers that it doesn't
need itself.

In order to clean it up, first add missing headers in
users of asm/prom.h

Signed-

spi: Prepare cleanup of powerpc's asm/prom.h

powerpc's asm/prom.h brings some headers that it doesn't
need itself.

In order to clean it up, first add missing headers in
users of asm/prom.h

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/5ed3298d8b5b1b5bf681d79584c61cb495852f4e.1648833423.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: mpc52xx: add parenthesis for sizeof

Fix missing parenthesis of sizeof reported by checkpatch.pl:
WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof

spi: mpc52xx: add parenthesis for sizeof

Fix missing parenthesis of sizeof reported by checkpatch.pl:
WARNING: sizeof *pp should be sizeof(*pp).

The kernel coding style suggests thinking of sizeof as a function
and add parenthesis.

Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Link: https://lore.kernel.org/r/1621301902-64158-4-git-send-email-songzhiqi1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: mpc52xx: Avoid using get_tbl()

get_tbl() is confusing as it returns the content TBL register
on PPC32 but the concatenation of TBL and TBU on PPC64.

Use mftb() instead.

This will allow the re

spi: mpc52xx: Avoid using get_tbl()

get_tbl() is confusing as it returns the content TBL register
on PPC32 but the concatenation of TBL and TBU on PPC64.

Use mftb() instead.

This will allow the removal of get_tbl() in a following patch.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/99bf008e2970de7f8ed3225cda69a6d06ae1a644.1612866360.git.christophe.leroy@csgroup.eu

show more ...

spi: spi-mpc52xx: Use new structure for SPI transfer delays

In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current

spi: spi-mpc52xx: Use new structure for SPI transfer delays

In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.

The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).

[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")

Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean-OyLXuOCK7orQT0dZR+AlfA@public.gmane.org>
Link: https://lore.kernel.org/r/20200227143931.20688-1-sergiu.cuciurean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428

Based on 1 normalized pattern(s):

this file is released under the gplv2

extracted by the scancode license scanner the SPDX lice

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 428

Based on 1 normalized pattern(s):

this file is released under the gplv2

extracted by the scancode license scanner the SPDX license identifier

GPL-2.0-only

has been chosen to replace the boilerplate/reference in 68 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

spi: mpc52xx: Use gpio_is_valid()

Replace the manual validity checks for the GPIO with the
gpio_is_valid().

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <brooni

spi: mpc52xx: Use gpio_is_valid()

Replace the manual validity checks for the GPIO with the
gpio_is_valid().

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi/mpc52xx: Combine substrings for two messages

The script "checkpatch.pl" pointed information out like the following.

WARNING: quoted string split across lines

Thus fix the affected source code

spi/mpc52xx: Combine substrings for two messages

The script "checkpatch.pl" pointed information out like the following.

WARNING: quoted string split across lines

Thus fix the affected source code places.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi/mpc52xx: Use kmalloc_array() in mpc52xx_spi_probe()

* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use

spi/mpc52xx: Use kmalloc_array() in mpc52xx_spi_probe()

* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".

This issue was detected by using the Coccinelle software.

* Replace the specification of a data type by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@kernel.org>

show more ...

spi: drop owner assignment from platform_drivers

A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

spi: Always check complete callback before calling it

Since commit 1e25cd4729bd "spi: Do not require a completion", this checking is
required to prevent NULL pointer dereference.

Signed-off-by: Axe

spi: Always check complete callback before calling it

Since commit 1e25cd4729bd "spi: Do not require a completion", this checking is
required to prevent NULL pointer dereference.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

spi: mpc52xx: Convert to use bits_per_word_mask

This controller only supports 8-bit word length.
Set bits_per_word_mask so spi core will reject transfers that attempt to use
an unsupported bits_per_

spi: mpc52xx: Convert to use bits_per_word_mask

This controller only supports 8-bit word length.
Set bits_per_word_mask so spi core will reject transfers that attempt to use
an unsupported bits_per_word value.
Also remove the duplicate code to test spi->mode, it is done by spi core.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

spi: Remove duplicate code to check chip_select

In spi_add_device(), we have the code to validate spi->chip_select.
So remove the duplicate code in various drivers.

Signed-off-by: Axel Lin <axel.li

spi: Remove duplicate code to check chip_select

In spi_add_device(), we have the code to validate spi->chip_select.
So remove the duplicate code in various drivers.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

spi: delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left o

spi: delete non-required instances of include <linux/init.h>

None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>. Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

show more ...

spi: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can dire

spi: use platform_{get,set}_drvdata()

Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

show more ...

spi: Remove HOTPLUG section attributes

CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitco

spi: Remove HOTPLUG section attributes

CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Bill Pemberton has done most of the legwork on this series. I've used
his script to purge the attributes from the drivers/gpio tree.

Reported-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

show more ...

spi/mpc52xx: Fix device remove function

The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is
complete; it reduces the device reference count to zero, which results in
devi

spi/mpc52xx: Fix device remove function

The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is
complete; it reduces the device reference count to zero, which results in
device memory being freed. An extra call to spi_master_put is unnecessary
and results in an access to free memory.

At the same time, since the call to spi_unregister_master results in device
memory being freed, it must no longer be accessed afterwards.

To fix both problems, call spi_master_get to get an extra reference to the
device, and call spi_master_put only after the last access to device data.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

show more ...

spi/mpc52xx: Fix error handling in probe function

The call to spi_master_put() is needed to free device memory. It must be called
after spi_alloc_master, and must only be called after the device mem

spi/mpc52xx: Fix error handling in probe function

The call to spi_master_put() is needed to free device memory. It must be called
after spi_alloc_master, and must only be called after the device memory is no
longer used.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

show more ...

spi: By default setup spi_masters with 1 chipselect and dynamics bus number

Trivial simplification. Instead of requiring spi master drivers to
always set the bus number (even when a dynamic number

spi: By default setup spi_masters with 1 chipselect and dynamics bus number

Trivial simplification. Instead of requiring spi master drivers to
always set the bus number (even when a dynamic number is desired),
this patch modifies spi_alloc_master() to initialize num_chipselect to
1 (because there will always be at least one CS) and bus_num to -1 for
dynamic allocation. This simplifies the code needed to be written for
drivers.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

show more ...

drivercore: Add helper macro for platform_driver boilerplate

For simple modules that contain a single platform_driver without any
additional setup code then ends up being a block of duplicated
boile

drivercore: Add helper macro for platform_driver boilerplate

For simple modules that contain a single platform_driver without any
additional setup code then ends up being a block of duplicated
boilerplate. This patch adds a new macro, module_platform_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Magnus Damm <magnus.damm@gmail.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

show more ...