scsi: scsi_debug: Address races following module load

When scsi_debug is loaded as a module with many (simulated) hosts, targets,
and devices (LUs), modprobe can take a long time to return. Only a

scsi: scsi_debug: Address races following module load

When scsi_debug is loaded as a module with many (simulated) hosts, targets,
and devices (LUs), modprobe can take a long time to return. Only a small
amount of this time is spent in the scsi_debug_init(); the rest is other
parts of the kernel reacting to to the appearance of new storage
devices. As soon as scsi_debug_init() has completed the user space may call
'rmmod scsi_debug' and this was found to cause race problems as outlined
here:

https://bugzilla.kernel.org/show_bug.cgi?id=212337

To reliably generate this race a sysfs parameter called rm_all_hosts was
added and the code was strengthened in this area. The main change was to
make the count of scsi_debug hosts present an atomic. Then it was found
that the handling of the existing add_host parameter needed the same
strengthening. Further: 'echo -9999 >
/sys/bus/pseudo/drivers/scsi_debug/add_host has the same effect as
rm_all_hosts so rm_all_hosts was not needed.

To inhibit a race between two invocations of writes to add_host, a mutex
was added. Also address a possible race when rmmod is called but LUs are
still being added.

The logic to remove (all) hosts is rather crude: it works backwards down a
linked lists of hosts. Any pending requests are terminated with
DID_NO_CONNECT as are any new requests. In the case where not all hosts are
being removed, the ones that remain may have lost requests as just
outlined. The lowest numbered host (id) hosts will remain.

Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220109012853.301953-2-dgilbert@interlog.com
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Fix buffer size of REPORT ZONES command

According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
im

scsi: scsi_debug: Fix buffer size of REPORT ZONES command

According to ZBC and SPC specifications, the unit of ALLOCATION LENGTH
field of REPORT ZONES command is byte. However, current scsi_debug
implementation handles it as number of zones to calculate buffer size to
report zones. When the ALLOCATION LENGTH has a large number, this results
in too large buffer size and causes memory allocation failure. Fix the
failure by handling ALLOCATION LENGTH as byte unit.

Link: https://lore.kernel.org/r/20211207010638.124280-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Zero clear zones at reset write pointer

When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_d

scsi: scsi_debug: Zero clear zones at reset write pointer

When a reset is requested the position of the write pointer is updated but
the data in the corresponding zone is not cleared. Instead scsi_debug
returns any data written before the write pointer was reset. This is an
error and prevents using scsi_debug for stale page cache testing of the
BLKRESETZONE ioctl.

Zero written data in the zone when resetting the write pointer.

Link: https://lore.kernel.org/r/20211122061223.298890-1-shinichiro.kawasaki@wdc.com
Fixes: f0d1cf9378bd ("scsi: scsi_debug: Add ZBC zone commands")
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()

In resp_mode_select() sanity check the block descriptor len to avoid UAF.

BUG: KASAN: use-after-free in resp_mode_select

scsi: scsi_debug: Sanity check block descriptor length in resp_mode_select()

In resp_mode_select() sanity check the block descriptor len to avoid UAF.

BUG: KASAN: use-after-free in resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
Read of size 1 at addr ffff888026670f50 by task scsicmd/15032

CPU: 1 PID: 15032 Comm: scsicmd Not tainted 5.15.0-01d0625 #15
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Call Trace:
<TASK>
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:107
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:257
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:443
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report_generic.c:306
resp_mode_select+0xa4c/0xb40 drivers/scsi/scsi_debug.c:2509
schedule_resp+0x4af/0x1a10 drivers/scsi/scsi_debug.c:5483
scsi_debug_queuecommand+0x8c9/0x1e70 drivers/scsi/scsi_debug.c:7537
scsi_queue_rq+0x16b4/0x2d10 drivers/scsi/scsi_lib.c:1521
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1640
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1762
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1839
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:63
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:837
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:775
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:941
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1166
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:52
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:50
entry_SYSCALL_64_after_hwframe+0x44/0xae arch/x86/entry/entry_64.S:113

Link: https://lore.kernel.org/r/1637262208-28850-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Fix type in min_t to avoid stack OOB

Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and t

scsi: scsi_debug: Fix type in min_t to avoid stack OOB

Change min_t() to use type "u32" instead of type "int" to avoid stack out
of bounds. With min_t() type "int" the values get sign extended and the
larger value gets used causing stack out of bounds.

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
Read of size 127 at addr ffff888072607128 by task syz-executor.7/18707

CPU: 1 PID: 18707 Comm: syz-executor.7 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:256
__kasan_report mm/kasan/report.c:442 [inline]
kasan_report.cold.14+0x7d/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x23/0x60 mm/kasan/shadow.c:65
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x1de/0x240 lib/scatterlist.c:976
sg_copy_from_buffer+0x33/0x40 lib/scatterlist.c:1000
fill_from_dev_buffer.part.34+0x82/0x130 drivers/scsi/scsi_debug.c:1162
fill_from_dev_buffer drivers/scsi/scsi_debug.c:1888 [inline]
resp_readcap16+0x365/0x3b0 drivers/scsi/scsi_debug.c:1887
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
sg_common_write.isra.18+0xeb3/0x2000 drivers/scsi/sg.c:836
sg_new_write.isra.19+0x570/0x8c0 drivers/scsi/sg.c:774
sg_ioctl_common+0x14d6/0x2710 drivers/scsi/sg.c:939
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636484247-21254-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Don't call kcalloc() if size arg is zero

If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of
that, for a following NULL pointer check to work on the returne

scsi: scsi_debug: Don't call kcalloc() if size arg is zero

If the size arg to kcalloc() is zero, it returns ZERO_SIZE_PTR. Because of
that, for a following NULL pointer check to work on the returned pointer,
kcalloc() must not be called with the size arg equal to zero. Return early
without error before the kcalloc() call if size arg is zero.

BUG: KASAN: null-ptr-deref in memcpy include/linux/fortify-string.h:191 [inline]
BUG: KASAN: null-ptr-deref in sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
Write of size 4 at addr 0000000000000010 by task syz-executor.1/22789

CPU: 1 PID: 22789 Comm: syz-executor.1 Not tainted 5.15.0-syzk #1
Hardware name: Red Hat KVM, BIOS 1.13.0-2
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
__kasan_report mm/kasan/report.c:446 [inline]
kasan_report.cold.14+0x112/0x117 mm/kasan/report.c:459
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0x1a3/0x210 mm/kasan/generic.c:189
memcpy+0x3b/0x60 mm/kasan/shadow.c:66
memcpy include/linux/fortify-string.h:191 [inline]
sg_copy_buffer+0x138/0x240 lib/scatterlist.c:974
do_dout_fetch drivers/scsi/scsi_debug.c:2954 [inline]
do_dout_fetch drivers/scsi/scsi_debug.c:2946 [inline]
resp_verify+0x49e/0x930 drivers/scsi/scsi_debug.c:4276
schedule_resp+0x4d8/0x1a70 drivers/scsi/scsi_debug.c:5478
scsi_debug_queuecommand+0x8c9/0x1ec0 drivers/scsi/scsi_debug.c:7533
scsi_dispatch_cmd drivers/scsi/scsi_lib.c:1520 [inline]
scsi_queue_rq+0x16b0/0x2d40 drivers/scsi/scsi_lib.c:1699
blk_mq_dispatch_rq_list+0xb9b/0x2700 block/blk-mq.c:1639
__blk_mq_sched_dispatch_requests+0x28f/0x590 block/blk-mq-sched.c:325
blk_mq_sched_dispatch_requests+0x105/0x190 block/blk-mq-sched.c:358
__blk_mq_run_hw_queue+0xe5/0x150 block/blk-mq.c:1761
__blk_mq_delay_run_hw_queue+0x4f8/0x5c0 block/blk-mq.c:1838
blk_mq_run_hw_queue+0x18d/0x350 block/blk-mq.c:1891
blk_mq_sched_insert_request+0x3db/0x4e0 block/blk-mq-sched.c:474
blk_execute_rq_nowait+0x16b/0x1c0 block/blk-exec.c:62
blk_execute_rq+0xdb/0x360 block/blk-exec.c:102
sg_scsi_ioctl drivers/scsi/scsi_ioctl.c:621 [inline]
scsi_ioctl+0x8bb/0x15c0 drivers/scsi/scsi_ioctl.c:930
sg_ioctl_common+0x172d/0x2710 drivers/scsi/sg.c:1112
sg_ioctl+0xa2/0x180 drivers/scsi/sg.c:1165
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

Link: https://lore.kernel.org/r/1636056397-13151-1-git-send-email-george.kennedy@oracle.com
Reported-by: syzkaller <syzkaller@googlegroups.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()

The following issue was observed running syzkaller:

BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG:

scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()

The following issue was observed running syzkaller:

BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815

CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe4/0x14a lib/dump_stack.c:118
print_address_description+0x73/0x280 mm/kasan/report.c:253
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x272/0x370 mm/kasan/report.c:410
memcpy+0x1f/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:377 [inline]
sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
__blk_run_queue_uncond block/blk-core.c:464 [inline]
__blk_run_queue+0x1a4/0x380 block/blk-core.c:484
blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
sg_write+0x64/0xa0 drivers/scsi/sg.c:622
__vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
vfs_write+0x184/0x4c0 fs/read_write.c:549
ksys_write+0x107/0x240 fs/read_write.c:599
do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe

We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.

Switch n, alen, and rlen to u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()

The following warning was observed running syzkaller:

[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessi

scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()

The following warning was observed running syzkaller:

[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724] program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995] dump_stack+0x108/0x15f
[ 3813.847524] print_address_description+0xa5/0x372
[ 3813.848243] kasan_report.cold+0x236/0x2a8
[ 3813.849439] check_memory_region+0x240/0x270
[ 3813.850094] memcpy+0x30/0x80
[ 3813.850553] sg_copy_buffer+0x157/0x1e0
[ 3813.853032] sg_copy_from_buffer+0x13/0x20
[ 3813.853660] fill_from_dev_buffer+0x135/0x370
[ 3813.854329] resp_readcap16+0x1ac/0x280
[ 3813.856917] schedule_resp+0x41f/0x1630
[ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699] scsi_dispatch_cmd+0x330/0x950
[ 3813.863329] scsi_request_fn+0xd8e/0x1710
[ 3813.863946] __blk_run_queue+0x10b/0x230
[ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220] sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637] sg_write+0x6c8/0xef0
[ 3813.878853] __vfs_write+0xe4/0x800
[ 3813.883487] vfs_write+0x17b/0x530
[ 3813.884008] ksys_write+0x103/0x270
[ 3813.886268] __x64_sys_write+0x77/0xc0
[ 3813.886841] do_syscall_64+0x106/0x360
[ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9

This issue can be reproduced with the following syzkaller log:

r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)

In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().

To solve this issue, define alloc_len as u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

block: rename REQ_HIPRI to REQ_POLLED

Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague,
the bio flag is specific to the polling implementation, so rename and
document it properly

block: rename REQ_HIPRI to REQ_POLLED

Unlike the RWF_HIPRI userspace ABI which is intentionally kept vague,
the bio flag is specific to the polling implementation, so rename and
document it properly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-12-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>

show more ...

scsi: scsi_debug: Call scsi_done() directly

Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.

Link: https://lore.kernel.org/r/20211007202923.2174984-70-bvanass

scsi: scsi_debug: Call scsi_done() directly

Conditional statements are faster than indirect calls. Hence call
scsi_done() directly.

Link: https://lore.kernel.org/r/20211007202923.2174984-70-bvanassche@acm.org
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clea

scsi: scsi_debug: Fix possible UAF in sdebug_add_host_helper()

[ Upstream commit e208a1d795a08d1ac0398c79ad9c58106531bcc5 ]

If device_register() fails in sdebug_add_host_helper(), it will goto clean
and sdbg_host will be freed, but sdbg_host->host_list will not be removed
from sdebug_host_list, then list traversal may cause UAF. Fix it.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221117084421.58918-1-yuancan@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

show more ...