iwlwifi: remove some outdated iwl22000 configurations

A few configuration structures were either not referenced anymore or
assigned to devices IDs that were not in use anymore. Remove them.

Signed

iwlwifi: remove some outdated iwl22000 configurations

A few configuration structures were either not referenced anymore or
assigned to devices IDs that were not in use anymore. Remove them.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: allocate more receive buffers for HE devices

For HE-capable devices, we need to allocate more receive buffers as
there could be 256 frames aggregated into a single A-MPDU, and then
they mig

iwlwifi: allocate more receive buffers for HE devices

For HE-capable devices, we need to allocate more receive buffers as
there could be 256 frames aggregated into a single A-MPDU, and then
they might contain A-MSDUs as well. Until 22000 family, the devices
are able to put multiple frames into a single RB and the default RB
size is 4k, but starting from AX210 family this is no longer true.
On the other hand, those newer devices only use 2k receive buffers
(by default).

Modify the code and configuration to allocate an appropriate number
of RBs depending on the device capabilities:

* 4096 for AX210 HE devices, which use 2k buffers by default,
* 2048 for 22000 family devices which use 4k buffers by default,
* 512 for existing 9000 family devices, which doesn't really
change anything since that's the default before this patch,
* 512 also for AX210/22000 family devices that don't do HE.

Theoretically, for devices lower than AX210, we wouldn't have to
allocate that many RBs if the RB size was manually increased, but
to support that the code got more complex, and it didn't really
seem necessary as that's a use case for monitor mode only, where
hopefully the wasted memory isn't really much of a concern.

Note that AX210 devices actually support bigger than 12-bit VID,
which is required here as we want to allocate 4096 buffers plus
some for quick recycling, so adjust the code for that as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: bump FW API to 52 for 22000 series

Start supporting API version 52 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: 22000: fix some indentation

Somehow two tabs snuck into this file where just one should be
used, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho

iwlwifi: 22000: fix some indentation

Somehow two tabs snuck into this file where just one should be
used, fix that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560

This is dead code, nothing uses the IWL_DEVICE_22560 macro and
thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all.

While at it,

iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560

This is dead code, nothing uses the IWL_DEVICE_22560 macro and
thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all.

While at it, remove some code and definitions used only in this
case, and clean up some comments/names that still refer to it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

iwlwifi: bump FW API to 51 for 22000 series

Start supporting API version 51 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

iwlwifi: dbg_ini: add monitor dumping support

Allow collecting monitor data in ini debug mode.
Implement both SMEM and DRAM monitor regions dumping.
For DRAM monitor, support DBGC1, DBGC2 and DBGC3

iwlwifi: dbg_ini: add monitor dumping support

Allow collecting monitor data in ini debug mode.
Implement both SMEM and DRAM monitor regions dumping.
For DRAM monitor, support DBGC1, DBGC2 and DBGC3 and support several
DRAM fragments per DBGC.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: add support for single antenna diversity

There are products which have a single chain with 2 antennas.
In these products, we need to inform the FW that the device has the
single antenn

iwlwifi: mvm: add support for single antenna diversity

There are products which have a single chain with 2 antennas.
In these products, we need to inform the FW that the device has the
single antenna diversity(SAD) feature. In the future, we will read
the active antenna from a BIOS configuration. Currently, we use a
default configuration which means that the FW decides which antenna to use.

Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: separate elements from cfg that are needed by trans_alloc

In order to be able to select the cfg depending on the HW revision or
on the RF ID, we need to set up the trans before selecting th

iwlwifi: separate elements from cfg that are needed by trans_alloc

In order to be able to select the cfg depending on the HW revision or
on the RF ID, we need to set up the trans before selecting the cfg.
To do so, move the elements from cfg that are needed by
iwl_trans_alloc() to a separate struct at the top of the cfg, so it
can be used by other cfg types as well, before selecting the rest of
the configuration.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: remove unnecessary IWL_DEVICE_AX200_COMMON definition

Remove the IWL_DEVICE_AX200_COMMON definition, since it's only used
once and relies mostly on IWL_DEVICE_22000_COMMON anyway.

Signed-o

iwlwifi: remove unnecessary IWL_DEVICE_AX200_COMMON definition

Remove the IWL_DEVICE_AX200_COMMON definition, since it's only used
once and relies mostly on IWL_DEVICE_22000_COMMON anyway.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: remove duplicate FW string definitions

The string we define as IWL_22000_HR_B_F0_FW_PRE is duplicate with
IWL_22000_QU_B_HR_B_FW_PRE. Remove the former to avoid confusion.

Signed-off-by:

iwlwifi: remove duplicate FW string definitions

The string we define as IWL_22000_HR_B_F0_FW_PRE is duplicate with
IWL_22000_QU_B_HR_B_FW_PRE. Remove the former to avoid confusion.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: bump FW API to 50 for 22000 series

Start supporting API version 50 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 49 for 22000 series

Start supporting API version 49 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: pcie: handle switching killer Qu B0 NICs to C0

We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0

iwlwifi: pcie: handle switching killer Qu B0 NICs to C0

We need to use a different firmware for C0 versions of killer Qu NICs.
Add structures for them and handle them in the if block that detects
C0 revisions.

Additionally, instead of having an inclusive check for QnJ devices,
make the selection exclusive, so that switching to QnJ is the
exception, not the default. This prevents us from having to add all
the non-QnJ cards to an exclusion list. To do so, only go into the
QnJ block if the device has an RF ID type HR and HW revision QnJ.

Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20190821171732.2266-1-luca@coelho.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

iwlwifi: pcie: add support for qu c-step devices

Add support for C-step devices. Currently we don't have a nice way of
matching the step and choosing the proper configuration, so we need to
switch

iwlwifi: pcie: add support for qu c-step devices

Add support for C-step devices. Currently we don't have a nice way of
matching the step and choosing the proper configuration, so we need to
switch the config structs one by one.

Cc: stable@vger.kernel.org
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

iwlwifi: change 0x02F0 fw from qu to quz

change the fw of 0x02F0 platform from qu to quz

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sig

iwlwifi: change 0x02F0 fw from qu to quz

change the fw of 0x02F0 platform from qu to quz

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

iwlwifi: add new cards for 22000 and change wrong structs

add few PCI ID'S for 22000 and chainge few cards structs names

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelh

iwlwifi: add new cards for 22000 and change wrong structs

add few PCI ID'S for 22000 and chainge few cards structs names

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

iwlwifi: add new cards for 22000 and fix struct name

add few PCI ID'S for 22000 and fix the wrong name for one
of the structs

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca

iwlwifi: add new cards for 22000 and fix struct name

add few PCI ID'S for 22000 and fix the wrong name for one
of the structs

Signed-off-by: Ihab Zhaika <ihab.zhaika@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

show more ...

iwlwifi: bump FW API to 48 for 22000 series

Start supporting API version 48 for 22000 series.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: remove unused 0x40C0 PCI device IDs

This device ID and device type was never released, so we can remove it
from the PCI IDs list.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: bump FW API to 47 for 22000 series

Start supporting API version 47 for 22000 series. The 9000 series is
now frozen on version 46.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

iwlwifi: cfg: use family 22560 based_params for AX210 family

Specifically, max_tfd_queue_size should be 0x10000 like in
22560 family and not 0x100 like in 22000 family.

Signed-off-by: Shaul Triebit

iwlwifi: cfg: use family 22560 based_params for AX210 family

Specifically, max_tfd_queue_size should be 0x10000 like in
22560 family and not 0x100 like in 22000 family.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: set 512 TX queue slots for AX210 devices

AX210 devices support 256 BA (256 MPDUs in an AMPDU).
The firmware requires that the number of TFDs will be
minimum twice as big as the BA size (2 *

iwlwifi: set 512 TX queue slots for AX210 devices

AX210 devices support 256 BA (256 MPDUs in an AMPDU).
The firmware requires that the number of TFDs will be
minimum twice as big as the BA size (2 * 256 = 512).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: mvm: use correct GP2 register address for 22000 family

The device time register address has changed for 22000 devices.
Add a util function for getting the GP2 time and use the correct
regis

iwlwifi: mvm: use correct GP2 register address for 22000 family

The device time register address has changed for 22000 devices.
Add a util function for getting the GP2 time and use the correct
register address depending on the device family.

Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...

iwlwifi: dbg_ini: add monitor header to smem monitor

Add write pointer and cycle count registers to smem monitor header.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-

iwlwifi: dbg_ini: add monitor header to smem monitor

Add write pointer and cycle count registers to smem monitor header.

Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

show more ...