ath6kl: add suspend_cutpower module parameter

This is to force ath6kl to power off hardware during suspend even if
sdio support keep power. This is needed, for example, when sdio
controller is buggy

ath6kl: add suspend_cutpower module parameter

This is to force ath6kl to power off hardware during suspend even if
sdio support keep power. This is needed, for example, when sdio
controller is buggy or maximum powersaving is desired.

Usage:

insmod ath6kl.ko suspend_cutpower=1

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: cut power during suspend

If sdio controller doesn't support keep power, cut power from hardware
during suspend and restart firmware during resume. If we are connected
during suspend, send a

ath6kl: cut power during suspend

If sdio controller doesn't support keep power, cut power from hardware
during suspend and restart firmware during resume. If we are connected
during suspend, send a disconnected event to user space.

Earlier suspend failed with an error if sdio didn't support keep power.
Now suspend will happen succesfully even with that case.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: add state variable depicting hw/fw state

This way it's easier to track state changes and in the future add
more warnings about using hardware in wrong states. Currently there
are few random

ath6kl: add state variable depicting hw/fw state

This way it's easier to track state changes and in the future add
more warnings about using hardware in wrong states. Currently there
are few random flags for trying to do the same, those will be cleaned
and removed in the future.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: implement ath6kl_cfg80211_suspend()

This is in preparation for cutpower suspend feature. HIF layer makes
the decision based on information provided by cfg80211 and what hardware
actually sup

ath6kl: implement ath6kl_cfg80211_suspend()

This is in preparation for cutpower suspend feature. HIF layer makes
the decision based on information provided by cfg80211 and what hardware
actually supports. Then it calls ath6kl_cfg80211_suspend() to enable
the chosen mode.

Functionality should be the same, this is just preparation for
more suspend modes (cutpower and wow).

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: print firmware crashes always

Currently firmware crash dump is printed only if debug is enabled.
Change it so that the crash dump is always printed.

Also move the code from init.c to hif.c.

ath6kl: print firmware crashes always

Currently firmware crash dump is printed only if debug is enabled.
Change it so that the crash dump is always printed.

Also move the code from init.c to hif.c.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: power down hardware when interface is down

The benefit from this is that user space can control hardware's power state
by putting interface up and down. This is handy if firmware gets to som

ath6kl: power down hardware when interface is down

The benefit from this is that user space can control hardware's power state
by putting interface up and down. This is handy if firmware gets to some
weird state.

The downside will be that putting interface up takes a bit longer,
I was measuring ~500 ms during interface up.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Report unique remain-on-channel cookie values

Even though only a single concurrent remain-on-channel operation is
supported, there may be two pending remain-on-channel events (one to
indicat

ath6kl: Report unique remain-on-channel cookie values

Even though only a single concurrent remain-on-channel operation is
supported, there may be two pending remain-on-channel events (one to
indicate end of a canceled operation and another to indicate start of a
new operation). User space won't be able to distinguish these events
unless unique cookies are used.

The previous behavior resulted in wpa_supplicant getting quite
confused about the driver's offchannel state in various sequences
and this made the P2P state machine behave incorrectly. Use of
more than a single remain-on-channel cookie value fixes this.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: move all credit distribution code to htc.c

As htc is the only user there's no reason to keep it in main.c.

No functional changes.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath6kl: rename struct htc_credit_state_info to ath6kl_htc_credit_info

Also rename cred_dist_cntxt to credit_info in struct htc_target.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath6kl: Use appropriate wdev from vif

Remove the wdev reference in struct ath6kl.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.

ath6kl: Use appropriate wdev from vif

Remove the wdev reference in struct ath6kl.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Add a modparam to enable multi normal interface support

This option lets operate more than one vif in normal mode (AP/STA/IBSS)
when support for multiple vif is enabled. This modparam needs

ath6kl: Add a modparam to enable multi normal interface support

This option lets operate more than one vif in normal mode (AP/STA/IBSS)
when support for multiple vif is enabled. This modparam needs to be used
as

modprobe ath6kl multi_norm_if_support=1

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Implement add_virtual_intf() and del_virtual_intf()

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath6kl: Maintain virtual interface in a list

This patch removes all references to ar->vif and takes
vif from a list.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-

ath6kl: Maintain virtual interface in a list

This patch removes all references to ar->vif and takes
vif from a list.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Introduce spinlock to protect vif specific information

Use this spinlock to protect the vif's data instead of
one from ath6kl.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcom

ath6kl: Introduce spinlock to protect vif specific information

Use this spinlock to protect the vif's data instead of
one from ath6kl.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Store hw mac address in struct ath6kl

WMI ready event gives the mac address, cache this
mac address in struct ath6kl so that it can be used to
compute the mac address for other vif in case o

ath6kl: Store hw mac address in struct ath6kl

WMI ready event gives the mac address, cache this
mac address in struct ath6kl so that it can be used to
compute the mac address for other vif in case of multi vif.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Use interface index from wmi data headr

Interface index is passed in wmi data header as well, use it
to get the corresponding vif structure.

Signed-off-by: Vasanthakumar Thiagarajan <vthiag

ath6kl: Use interface index from wmi data headr

Interface index is passed in wmi data header as well, use it
to get the corresponding vif structure.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Refactor ath6kl_destroy()

So that the deinitialization of ath6kl and vif are separated.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo

ath6kl: Refactor ath6kl_destroy()

So that the deinitialization of ath6kl and vif are separated.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Cleanup parameters in ath6kl_init_control_info() and ath6kl_init_profile_info()

Pass vif structure to those functions instead of ath6kl because these
functions do vif specific information in

ath6kl: Cleanup parameters in ath6kl_init_control_info() and ath6kl_init_profile_info()

Pass vif structure to those functions instead of ath6kl because these
functions do vif specific information initialization.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Remove net_device from ath6kl

Use one which is available in vif structure instead.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.

ath6kl: Remove net_device from ath6kl

Use one which is available in vif structure instead.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Take vif information from wmi event

Interface index is passed in wmi command header from target.
Use this index to get the appropriate vif.

Signed-off-by: Vasanthakumar Thiagarajan <vthiaga

ath6kl: Take vif information from wmi event

Interface index is passed in wmi command header from target.
Use this index to get the appropriate vif.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Maintain firmware interface index in struct ath6kl_vif

Pass this index to target in wmi commands to specify the interface
for which the command needs to be handled.

Signed-off-by: Vasanthak

ath6kl: Maintain firmware interface index in struct ath6kl_vif

Pass this index to target in wmi commands to specify the interface
for which the command needs to be handled.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

show more ...

ath6kl: Make net and target stats vif specific

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath6kl: Move few more vif specific information to struct ath6kl_vif

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath6kl: Move scan_req info and sme_state to vif

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

ath6kl: Move disconnect timer to vif structure

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>