qed: Add VF->PF channel infrastructure

Communication between VF and PF is based on a dedicated HW channel;
VF will prepare a messge, and by signaling the HW the PF would get a
notification of that m

qed: Add VF->PF channel infrastructure

Communication between VF and PF is based on a dedicated HW channel;
VF will prepare a messge, and by signaling the HW the PF would get a
notification of that message existance. The PF would then copy the
message, process it and DMA an answer back to the VF as a response.

The messages themselves are TLV-based - allowing easier backward/forward
compatibility.

This patch adds the infrastructure of the channel on the PF side -
starting with the arrival of the notification and ending with DMAing
the response back to the VF.

It also adds a dummy-response as reference, as it only lays the
groundwork of the communication; it doesn't really add support of any
actual messages.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: add infrastructure for device self tests.

This patch adds the functionality and APIs needed for selftests.
It adds the ability to configure the link-mode which is required for the
implementatio

qed: add infrastructure for device self tests.

This patch adds the functionality and APIs needed for selftests.
It adds the ability to configure the link-mode which is required for the
implementation of loopback tests. It adds the APIs for clock test,
register test, interrupt test and memory test.

Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add PF min bandwidth configuration support

This patch adds support for PF minimum bandwidth update
or configuration notified by management firmware.

Signed-off-by: Manish Chopra <manish.chopra

qed: Add PF min bandwidth configuration support

This patch adds support for PF minimum bandwidth update
or configuration notified by management firmware.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add PF max bandwidth configuration support

This patch adds support for PF maximum bandwidth update
or configuration notified by management firmware.

Signed-off-by: Manish Chopra <manish.chopra

qed: Add PF max bandwidth configuration support

This patch adds support for PF maximum bandwidth update
or configuration notified by management firmware.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add vport WFQ configuration APIs

This patch adds relevant APIs needed to configure WFQ
(Weighted fair queueing) values for the vports. WFQ configuration
is used per vport basis when minimum ban

qed: Add vport WFQ configuration APIs

This patch adds relevant APIs needed to configure WFQ
(Weighted fair queueing) values for the vports. WFQ configuration
is used per vport basis when minimum bandwidth update/configuration
is notified to the PF by the management firmware.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add infrastructure support for tunneling

This patch adds various structure/APIs needed to configure/enable different
tunnel [VXLAN/GRE/GENEVE] parameters on the adapter.

Signed-off-by: Manish

qed: Add infrastructure support for tunneling

This patch adds various structure/APIs needed to configure/enable different
tunnel [VXLAN/GRE/GENEVE] parameters on the adapter.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Notify of transciever changes

Handle a new message from the MFW, one that indicate that the transciever
state has changed, and log that into the system logs.

Signed-off-by: Zvi Nachmani <Zvi.N

qed: Notify of transciever changes

Handle a new message from the MFW, one that indicate that the transciever
state has changed, and log that into the system logs.

Signed-off-by: Zvi Nachmani <Zvi.Nachmani@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed/qede: Add infrastructure support for hardware GRO

This patch adds mainly structures and APIs prototype changes
in order to give support for qede slowpath/fastpath support
for the same.

Signed-o

qed/qede: Add infrastructure support for hardware GRO

This patch adds mainly structures and APIs prototype changes
in order to give support for qede slowpath/fastpath support
for the same.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Support B0 instead of A0

BB_A0 is a development model that is will not reach actual clients.
In fact, future firmware would simply fail to initialize such chip.

This changes the configuration

qed: Support B0 instead of A0

BB_A0 is a development model that is will not reach actual clients.
In fact, future firmware would simply fail to initialize such chip.

This changes the configuration into B0 instead of A0, and adds a safeguard
against the slim chance someone would actually try this with an A0 adapter
in which case probe would gracefully fail.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed/qede: use 8.7.3.0 FW.

This patch moves the qed* driver into utilizing the 8.7.3.0 FW.
This new FW is required for a lot of new SW features, including:
- Vlan filtering offload
- Encapsulatio

qed/qede: use 8.7.3.0 FW.

This patch moves the qed* driver into utilizing the 8.7.3.0 FW.
This new FW is required for a lot of new SW features, including:
- Vlan filtering offload
- Encapsulation offload support
- HW ingress aggregations
As well as paving the way for the possibility of adding storage protocols
in the future.

V2:
- Fix kbuild test robot error/warnings.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add support for changing LED state

Physical LEDs are being controlled by the management FW.
This adds the qed functionality required to request management FW to
change the LED configuration, as

qed: Add support for changing LED state

Physical LEDs are being controlled by the management FW.
This adds the qed functionality required to request management FW to
change the LED configuration, as well as the necessary APIs for this
functionality to later be used by the protocol drivers.

Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add statistics support

Device statistics can be gathered on-demand. This adds the qed support for
reading the statistics [both function and port] from the device, and adds
to the public API a m

qed: Add statistics support

Device statistics can be gathered on-demand. This adds the qed support for
reading the statistics [both function and port] from the device, and adds
to the public API a method for requesting the current statistics.

Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add slowpath L2 support

This patch adds to the qed the support to configure various L2 elements,
such as channels and basic filtering conditions.
It also enhances its public API to allow qede t

qed: Add slowpath L2 support

This patch adds to the qed the support to configure various L2 elements,
such as channels and basic filtering conditions.
It also enhances its public API to allow qede to later utilize this
functionality.

Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add basic L2 interface

This patch adds a public API for a network driver to work on top of QED.
The interface itself is very minimal - it's mostly infrastructure, as the
only content it has aft

qed: Add basic L2 interface

This patch adds a public API for a network driver to work on top of QED.
The interface itself is very minimal - it's mostly infrastructure, as the
only content it has after this patch is a query for HW-based information
required for the creation of a network interface [I.e., no actual
protocol-specific configurations are supported].

Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: Add module with basic common support

The Qlogic Everest Driver is the backend module for the QL4xxx ethernet
products by Qlogic.

This module serves two main purposes:
1. It's responsible to c

qed: Add module with basic common support

The Qlogic Everest Driver is the backend module for the QL4xxx ethernet
products by Qlogic.

This module serves two main purposes:
1. It's responsible to contain all the common code that will be shared
between the various drivers that would be used with said line of
products. Flows such as chip initialization and de-initialization
fall under this category.

2. It would abstract the protocol-specific HW & FW components, allowing
the protocol drivers to have a clean APIs which is detached in its
slowpath configuration from the actual HSI.

This adds a very basic module without any protocol-specific bits.
I.e., this adds a basic implementation that almost entirely falls under
the first category.

Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: qed_hsi.h: Avoid the use of one-element array

One-element arrays are being deprecated[1]. Replace the one-element
array with a simple value type '__le32 reserved1'[2], once it seems

net: qed_hsi.h: Avoid the use of one-element array

One-element arrays are being deprecated[1]. Replace the one-element
array with a simple value type '__le32 reserved1'[2], once it seems
this is just a placeholder for alignment.

[1] https://github.com/KSPP/linux/issues/79
[2] https://github.com/KSPP/linux/issues/86

Tested-by: kernel test robot <lkp@intel.com>
Link: https://github.com/GustavoARSilva/linux-hardening/blob/master/cii/0-day/qed_hsi-20200718.md
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: add support for the extended speed and FEC modes

Add all necessary code (NVM parsing, MFW and Ethtool reports etc.) to
support extended speed and FEC modes.
These new modes are

qed: add support for the extended speed and FEC modes

Add all necessary code (NVM parsing, MFW and Ethtool reports etc.) to
support extended speed and FEC modes.
These new modes are supported by the new boards revisions and newer
MFW versions.

Misc: correct port type for MEDIA_KR.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: add missing loopback modes

These modes are relevant only for several boards, but may be reported by
MFW as well as the others.

Signed-off-by: Alexander Lobakin <alobakin@ma

qed: add missing loopback modes

These modes are relevant only for several boards, but may be reported by
MFW as well as the others.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: add support for new port modes

These ports ship on new boards revisions and are supported by newer
firmware versions.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com

qed: add support for new port modes

These ports ship on new boards revisions and are supported by newer
firmware versions.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: reformat several structures a bit

Reformat a few nvm_cfg* structures (and partly qed_dev) prior to adding
new fields and definitions.

Signed-off-by: Alexander Lobakin <alob

qed: reformat several structures a bit

Reformat a few nvm_cfg* structures (and partly qed_dev) prior to adding
new fields and definitions.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: add support for Forward Error Correction

Add all necessary routines for reading supported FEC modes from NVM and
querying FEC control to the MFW (if the running version supports it)

qed: add support for Forward Error Correction

Add all necessary routines for reading supported FEC modes from NVM and
querying FEC control to the MFW (if the running version supports it).

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: reformat several structures a bit

Prior to adding new fields and bitfields, reformat the related
structures according to the Linux style (spaces to tabs,
lowercase hex, indentat

qed: reformat several structures a bit

Prior to adding new fields and bitfields, reformat the related
structures according to the Linux style (spaces to tabs,
lowercase hex, indentation etc.).

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: add support for multi-rate transceivers

Set the corresponding advertised and supported link modes according
to the detected transceiver type and device capabilities.

Signed

qed: add support for multi-rate transceivers

Set the corresponding advertised and supported link modes according
to the detected transceiver type and device capabilities.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

qed: reformat public_port::transceiver_data a bit

Prior to adding new bitfields, reformat the existing ones from spaces
to tabs, and unify all hex values to lowercase.

Signed-of

qed: reformat public_port::transceiver_data a bit

Prior to adding new bitfields, reformat the existing ones from spaces
to tabs, and unify all hex values to lowercase.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net: qed: sanitize BE/LE data processing

Current code assumes that both host and device operates in Little Endian
in lots of places. While this is true for x86 platform, this doesn't mea

net: qed: sanitize BE/LE data processing

Current code assumes that both host and device operates in Little Endian
in lots of places. While this is true for x86 platform, this doesn't mean
we should not care about this.

This commit addresses all parts of the code that were pointed out by sparse
checker. All operations with restricted (__be*/__le*) types are now
protected with explicit from/to CPU conversions, even if they're noops on
common setups.

I'm sure there are more such places, but this implies a deeper code
investigation, and is a subject for future works.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...