#
7e7845f3 |
| 28-Mar-2018 |
Ezequiel Garcia <ezequiel@collabora.co.uk> |
mmc: jz4780: Order headers alphabetically Just a minor cleanup to order the headers alphabetically. This helps prevent merge conflicts. Tested-by: Mathieu Malaterre <malat@debia
mmc: jz4780: Order headers alphabetically Just a minor cleanup to order the headers alphabetically. This helps prevent merge conflicts. Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
7e8466e2 |
| 28-Mar-2018 |
Paul Cercueil <paul@crapouillou.net> |
mmc: jz4740: Fix error exit path in driver's probe Currently, if jz4740_mmc_request_gpios() fails, the driver tries to release DMA resources. This is wrong because DMA is requested a
mmc: jz4740: Fix error exit path in driver's probe Currently, if jz4740_mmc_request_gpios() fails, the driver tries to release DMA resources. This is wrong because DMA is requested at a later stage. Signed-off-by: Paul Cercueil <paul@crapouillou.net> [Ezequiel: cleanup commit message] Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
a04f0017 |
| 28-Mar-2018 |
Alex Smith <alex.smith@imgtec.com> |
mmc: jz4740: Fix race condition in IRQ mask update A spinlock is held while updating the internal copy of the IRQ mask, but not while writing it to the actual IMASK register. After the l
mmc: jz4740: Fix race condition in IRQ mask update A spinlock is held while updating the internal copy of the IRQ mask, but not while writing it to the actual IMASK register. After the lock is released, an IRQ can occur before the IMASK register is written. If handling this IRQ causes the mask to be changed, when the handler returns back to the middle of the first mask update, a stale value will be written to the mask register. If this causes an IRQ to become unmasked that cannot have its status cleared by writing a 1 to it in the IREG register, e.g. the SDIO IRQ, then we can end up stuck with the same IRQ repeatedly being fired but not handled. Normally the MMC IRQ handler attempts to clear any unexpected IRQs by writing IREG, but for those that cannot be cleared in this way then the IRQ will just repeatedly fire. This was resulting in lockups after a while of using Wi-Fi on the CI20 (GitHub issue #19). Resolve by holding the spinlock until after the IMASK register has been updated. Cc: stable@vger.kernel.org Link: https://github.com/MIPS/CI20_linux/issues/19 Fixes: 61bfbdb85687 ("MMC: Add support for the controller on JZ4740 SoCs.") Tested-by: Mathieu Malaterre <malat@debian.org> Signed-off-by: Alex Smith <alex.smith@imgtec.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v4.15, v4.13.16, v4.14 |
|
#
2ee4f620 |
| 24-Oct-2017 |
Kees Cook <keescook@chromium.org> |
mmc: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_t
mmc: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alex Dubov <oakad@yahoo.com> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Cc: Allen <allen.lkml@gmail.com> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16 |
|
#
fa5ed6bc |
| 12-May-2017 |
Paul Cercueil <paul@crapouillou.net> |
mmc: jz4740: Let the pinctrl driver configure the pins Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes.
mmc: jz4740: Let the pinctrl driver configure the pins Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
show more ...
|
Revision tags: v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7 |
|
#
feeef096 |
| 26-Mar-2017 |
Heiner Kallweit <hkallweit1@gmail.com> |
mmc: use new core function mmc_get_dma_dir Use new core function mmc_get_dma_dir(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson
mmc: use new core function mmc_get_dma_dir Use new core function mmc_get_dma_dir(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9 |
|
#
d3c6aac3 |
| 23-Nov-2016 |
Linus Walleij <linus.walleij@linaro.org> |
mmc: delete is_first_req parameter from pre-request callback The void (*pre_req) callback in the struct mmc_host_ops vtable is passing an argument "is_first_req" indicating whether this
mmc: delete is_first_req parameter from pre-request callback The void (*pre_req) callback in the struct mmc_host_ops vtable is passing an argument "is_first_req" indicating whether this is the first request or not. None of the in-kernel users use this parameter: instead, since they all just do variants of dma_map* they use the DMA cookie to indicate whether a pre* callback has already been done for a request when they decide how to handle it. Delete the parameter from the callback and all users, as it is just pointless cruft. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4 |
|
#
53bf837b |
| 04-Jul-2016 |
Thomas Gleixner <tglx@linutronix.de> |
timers: Remove set_timer_slack() leftovers We now have implicit batching in the timer wheel. The slack API is no longer used, so remove it. Signed-off-by: Thomas Gleixner <tglx@
timers: Remove set_timer_slack() leftovers We now have implicit batching in the timer wheel. The slack API is no longer used, so remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew F. Davis <afd@ti.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: David S. Miller <davem@davemloft.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: George Spelvin <linux@sciencehorizons.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: John Stultz <john.stultz@linaro.org> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <lenb@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Pali Rohár <pali.rohar@gmail.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-block@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Cc: rt@linutronix.de Link: http://lkml.kernel.org/r/20160704094342.189813118@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
Revision tags: v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9, v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1 |
|
#
31f1c442 |
| 01-Feb-2016 |
Jaehoon Chung <jh80.chung@samsung.com> |
mmc: jz4740_mmc: remove the MMC_DATA_STREAM flag Remove the MMC_DATA_STREAM flag because it isn't used anymore. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-
mmc: jz4740_mmc: remove the MMC_DATA_STREAM flag Remove the MMC_DATA_STREAM flag because it isn't used anymore. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4, openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1, openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1, openbmc-20151028-1, v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2, v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5, v4.0-rc4, v4.0-rc3, v4.0-rc2, v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2, v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1 |
|
#
2137f5d3 |
| 12-Aug-2014 |
Peter Griffin <peter.griffin@linaro.org> |
mmc: remove .owner field for drivers using module_platform_driver This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is override
mmc: remove .owner field for drivers using module_platform_driver This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v3.16, v3.16-rc7 |
|
#
bb2f4592 |
| 20-Jul-2014 |
Apelete Seketeli <apelete@seketeli.net> |
mmc: jz4740: prepare next dma transfer in parallel with current transfer Make use of the MMC asynchronous request capability to prepare the next DMA transfer request in parallel with the
mmc: jz4740: prepare next dma transfer in parallel with current transfer Make use of the MMC asynchronous request capability to prepare the next DMA transfer request in parallel with the current transfer. This is done by adding pre-request and post-request callbacks that are used by the MMC framework during an active data transfer. It should help reduce the impact of DMA preparation overhead on the SD card performance. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
#
7ca27a6f |
| 20-Jul-2014 |
Apelete Seketeli <apelete@seketeli.net> |
mmc: jz4740: add dma infrastructure for data transfers Until now the MMC driver for JZ4740 SoC was relying on PIO mode only for data transfers. This patch allows the use of DMA for d
mmc: jz4740: add dma infrastructure for data transfers Until now the MMC driver for JZ4740 SoC was relying on PIO mode only for data transfers. This patch allows the use of DMA for data trasnfers in addition to PIO mode by relying on DMA Engine. DMA tranfers performance might be further improved by taking advantage of the asynchronous request capability of the MMC framework. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
show more ...
|
Revision tags: v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3, v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6, v3.15-rc5, v3.15-rc4 |
|
#
1acee84b |
| 29-Apr-2014 |
Alex Smith <alex.smith@imgtec.com> |
mmc: jz4740: don't wait for PRG_DONE after stop command with R1 response As of commit bcc3e1726d ("mmc: block: Use R1 responses for stop cmds for read requests"), stop commands for reads
mmc: jz4740: don't wait for PRG_DONE after stop command with R1 response As of commit bcc3e1726d ("mmc: block: Use R1 responses for stop cmds for read requests"), stop commands for reads do not have MMC_RSP_BUSY set. In this case we should not wait for a PRG_DONE IRQ after sending the stop command: it will not get raised when the busy flag is not set, causing the request to fail with a timeout. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Chris Ball <chris@printf.net> Cc: James Hogan <james.hogan@imgtec.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <chris@printf.net>
show more ...
|
Revision tags: v3.15-rc3, v3.15-rc2, v3.15-rc1, v3.14, v3.14-rc8, v3.14-rc7, v3.14-rc6, v3.14-rc5, v3.14-rc4, v3.14-rc3, v3.14-rc2, v3.14-rc1, v3.13, v3.13-rc8, v3.13-rc7, v3.13-rc6, v3.13-rc5, v3.13-rc4, v3.13-rc3, v3.13-rc2, v3.13-rc1, v3.12, v3.12-rc7, v3.12-rc6, v3.12-rc5, v3.12-rc4, v3.12-rc3 |
|
#
c91c413e |
| 25-Sep-2013 |
Ulf Hansson <ulf.hansson@linaro.org> |
mmc: jz4740: Move away from using deprecated APIs Suspend and resume of cards are being handled from the protocol layer and consequently the mmc_suspend|resume_host APIs are deprecated.
mmc: jz4740: Move away from using deprecated APIs Suspend and resume of cards are being handled from the protocol layer and consequently the mmc_suspend|resume_host APIs are deprecated. This means we can simplify the suspend|resume callbacks by removing the use of the deprecated APIs. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
Revision tags: v3.12-rc2, v3.12-rc1, v3.11, v3.11-rc7, v3.11-rc6, v3.11-rc5 |
|
#
214fc309 |
| 08-Aug-2013 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd() Add a debounce parameter to the mmc_gpio_request_cd() function that enables GPIO debouncing when set to a non-zero valu
mmc: slot-gpio: Add debouncing capability to mmc_gpio_request_cd() Add a debounce parameter to the mmc_gpio_request_cd() function that enables GPIO debouncing when set to a non-zero value. This can be used by MMC host drivers to enable debouncing on the card detect signal. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
Revision tags: v3.11-rc4, v3.11-rc3, v3.11-rc2, v3.11-rc1, v3.10 |
|
#
3e7e8c18 |
| 28-Jun-2013 |
Wei Yongjun <yongjun_wei@trendmicro.com.cn> |
mmc: jz4740: fix return value check in jz4740_mmc_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return val
mmc: jz4740: fix return value check in jz4740_mmc_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Also there is already a error message within devm_ioremap_resource(), so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
Revision tags: v3.10-rc7, v3.10-rc6 |
|
#
017d84bd |
| 09-Jun-2013 |
Lars-Peter Clausen <lars@metafoo.de> |
mmc: jz4740: Use managed resources Use managed resources for the mmio memory region and the clock. Makes the code a bit shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.
mmc: jz4740: Use managed resources Use managed resources for the mmio memory region and the clock. Makes the code a bit shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
#
58e300af |
| 09-Jun-2013 |
Lars-Peter Clausen <lars@metafoo.de> |
mmc: jz4740: Use slot-gpio helpers Use the slot-gpio helpers to handle the write protect and card detect GPIO pins instead of re-implementing the same functionality in the driver.
mmc: jz4740: Use slot-gpio helpers Use the slot-gpio helpers to handle the write protect and card detect GPIO pins instead of re-implementing the same functionality in the driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
#
5d5c0350 |
| 09-Jun-2013 |
Lars-Peter Clausen <lars@metafoo.de> |
mmc: jz4740: Use SIMPLE_DEV_PM_OPS It's a bit shorter than open-conding it. While we are at it also make jz4740_mmc_pm_ops static. Signed-off-by: Lars-Peter Clausen <lars@metafo
mmc: jz4740: Use SIMPLE_DEV_PM_OPS It's a bit shorter than open-conding it. While we are at it also make jz4740_mmc_pm_ops static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
#
8a489aa1 |
| 09-Jun-2013 |
Paul Cercueil <paul@crapouillou.net> |
mmc: jz4740: Fix handling of read errors. For no reason, the code handling write errors was implemented while the code handling read errors was missing. Signed-off-by: Paul Cerc
mmc: jz4740: Fix handling of read errors. For no reason, the code handling write errors was implemented while the code handling read errors was missing. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
#
33194793 |
| 09-Jun-2013 |
Paul Cercueil <paul@crapouillou.net> |
mmc: jz4740: Remove duplicated code. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
|
Revision tags: v3.10-rc5, v3.10-rc4, v3.10-rc3, v3.10-rc2 |
|
#
fca9661c |
| 12-May-2013 |
Lars-Peter Clausen <lars@metafoo.de> |
mmc: jz4740: Use clk_prepare_enable/clk_disable_unprepare In preparation to switching the jz4740 clk driver to the common clk framework, update the clk enable/disable calls to clk_pr
mmc: jz4740: Use clk_prepare_enable/clk_disable_unprepare In preparation to switching the jz4740 clk driver to the common clk framework, update the clk enable/disable calls to clk_prepare_enable/clk_disable_unprepare. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
Revision tags: v3.10-rc1 |
|
#
113a87f8 |
| 06-May-2013 |
Jingoo Han <jg1.han@samsung.com> |
mmc: remove unnecessary platform_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdec
mmc: remove unnecessary platform_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Chris Ball <cjb@laptop.org>
show more ...
|
Revision tags: v3.9, v3.9-rc8, v3.9-rc7, v3.9-rc6, v3.9-rc5, v3.9-rc4, v3.9-rc3, v3.9-rc2, v3.9-rc1, v3.8, v3.8-rc7, v3.8-rc6, v3.8-rc5, v3.8-rc4, v3.8-rc3, v3.8-rc2, v3.8-rc1, v3.7, v3.7-rc8, v3.7-rc7 |
|
#
6e0ee714 |
| 19-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
mmc: remove use of __devexit CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Manuel Lauss
mmc: remove use of __devexit CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|
#
c3be1efd |
| 19-Nov-2012 |
Bill Pemberton <wfp5p@virginia.edu> |
mmc: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <c
mmc: remove use of __devinit CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show more ...
|