mmc: remove imxmmc driver

This driver is broken since 2.6.31 when the traditional i.MX1
support was removed.

In theory the i.MX1 mmc controller can be supported by the mxcmmc
driver which basically

mmc: remove imxmmc driver

This driver is broken since 2.6.31 when the traditional i.MX1
support was removed.

In theory the i.MX1 mmc controller can be supported by the mxcmmc
driver which basically is the same hardware. However, the i.MX1
controller has severe bugs which made several workarounds necessary which
resulted in a different driver structure. At that time it seemed easier
to write a second driver to support hardware without bugs.

As noone cared for the i.MX1 driver for a long time and it does
not compile, remove it.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: Support of PCI mode in the dw_mmc driver

Support of PCI mode for the dw_mmc driver. This Patch adds the
support for the scenario where the Synopsys Designware IP
is present on the PCI bus. The

mmc: Support of PCI mode in the dw_mmc driver

Support of PCI mode for the dw_mmc driver. This Patch adds the
support for the scenario where the Synopsys Designware IP
is present on the PCI bus. The patch adds the minimal modifications
necessary for the driver to work on PCI platform. Also added separate
files for PCI and PLATFORM modes of operation.

Signed-off-by: Shashidhar Hiremath <shashidharh@vayavyalabs.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: sdhci-pci: add platform data

Add a means of getting platform data for the SDHCI PCI
devices. The data is stored against the slot not the
device in order to support multi-slot devices.

The dat

mmc: sdhci-pci: add platform data

Add a means of getting platform data for the SDHCI PCI
devices. The data is stored against the slot not the
device in order to support multi-slot devices.

The data allows platform-specific setup (such as getting
GPIO numbers from firmware or setting up wl12xx for SDIO)
to be done in platform support files instead of the
sdhci-pci driver.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: tmio: Fix build error without CONFIG_MMC_SDHI

Only compile tmio_mmc_dma.o when CONFIG_MMC_SDHI is selected (as y or m).

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Chr

mmc: tmio: Fix build error without CONFIG_MMC_SDHI

Only compile tmio_mmc_dma.o when CONFIG_MMC_SDHI is selected (as y or m).

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: host: delete obsolete sdhci-pxa.c

Delete obsolete sdhci-pxa.c, which was previously shared amongst the
entire PXA series. Instead we now use sdhci-pxav3.c for mmp2 and
sdhci-pxav2.c for pxa9xx

mmc: host: delete obsolete sdhci-pxa.c

Delete obsolete sdhci-pxa.c, which was previously shared amongst the
entire PXA series. Instead we now use sdhci-pxav3.c for mmp2 and
sdhci-pxav2.c for pxa9xx.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: host: split up sdhci-pxa, create sdhci-pxav2.c

sdhci-pltfm driver for PXAV2 SoCs, such as pxa910.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Jun Nie <njun@marvell.co

mmc: host: split up sdhci-pxa, create sdhci-pxav2.c

sdhci-pltfm driver for PXAV2 SoCs, such as pxa910.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Jun Nie <njun@marvell.com>
Signed-off-by: Qiming Wu <wuqm@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: host: split up sdhci-pxa, create sdhci-pxav3.c

sdhci-pltfm driver for PXAV3 SoCs, such as MMP2.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Philip Rakity <prakity@mar

mmc: host: split up sdhci-pxa, create sdhci-pxav3.c

sdhci-pltfm driver for PXAV3 SoCs, such as MMP2.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Signed-off-by: Philip Rakity <prakity@marvell.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Mark F. Brown <mark.brown314@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: sdhci: change sdhci-pltfm into a module

There are a couple of problems left from the sdhci pltfm and OF
consolidation changes.

* When building more than one sdhci-pltfm based drivers in the sa

mmc: sdhci: change sdhci-pltfm into a module

There are a couple of problems left from the sdhci pltfm and OF
consolidation changes.

* When building more than one sdhci-pltfm based drivers in the same
image, linker will give multiple definition error on the sdhci-pltfm
helper functions. For example right now, building sdhci-of-esdhc
and sdhci-of-hlwd together is a valid combination from Kconfig view.

* With the current build method, there is error with building the
drivers as module, but module installation fails with modprobe.

The patch fixes above problems by changing sdhci-pltfm into a module.
To avoid EXPORT_SYMBOL on so many big endian IO accessors, it moves
these accessors into sdhci-pltfm.h as the 'static inline' functions.
As a result, sdhci.h needs to be included in sdhci-pltfm.h, and in
turn can be removed from individual drivers which already include
sdhci-pltfm.h.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: sdhci: make sdhci-of device drivers self registered

The patch turns the sdhci-of-core common stuff into helper functions
added into sdhci-pltfm.c, and makes sdhci-of device drviers self
registe

mmc: sdhci: make sdhci-of device drivers self registered

The patch turns the sdhci-of-core common stuff into helper functions
added into sdhci-pltfm.c, and makes sdhci-of device drviers self
registered using the same pair of .probe and .remove used by
sdhci-pltfm device drivers.

As a result, sdhci-of-core.c and sdhci-of.h can be eliminated with
those common things merged into sdhci-pltfm.c and sdhci-pltfm.h
respectively.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: sdhci: make sdhci-pltfm device drivers self registered

The patch turns the common stuff in sdhci-pltfm.c into functions, and
add device drivers their own .probe and .remove which in turn call
i

mmc: sdhci: make sdhci-pltfm device drivers self registered

The patch turns the common stuff in sdhci-pltfm.c into functions, and
add device drivers their own .probe and .remove which in turn call
into the common functions, so that those sdhci-pltfm device drivers
register itself and keep all device specific things away from common
sdhci-pltfm file.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver

Add a driver for Elan Digital System's VUB300 chip which is a USB
connected SDIO/SDmem/MMC host controller. A VUB300 chip enables a USB 2.0
or USB 1.1

mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver

Add a driver for Elan Digital System's VUB300 chip which is a USB
connected SDIO/SDmem/MMC host controller. A VUB300 chip enables a USB 2.0
or USB 1.1 connected host computer to use SDIO/SD/MMC cards without the
need for a directly connected, for example via PCI, SDIO host controller.

Signed-off-by: Anthony F Olech <tony.olech@elandigitalsystems.com>
[cjb: various punctuation and style fixes]
Tested-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver

On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO
MFD cell driver. Now that the tmio_mmc driver has been spli

mmc: tmio: convert the SDHI MMC driver from MFD to a platform driver

On sh-mobile platforms the SDHI driver was using the tmio_mmc SD/SDIO
MFD cell driver. Now that the tmio_mmc driver has been split into a
core and a separate MFD glue, we can support SDHI natively without the
need to emulate an MFD controller. This also allows to support systems
with an on-SoC SDHI controller and a separate MFD with a TMIO core.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: tmio: split core functionality, DMA and MFD glue

TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to
the one, used in MN5774 and other MN57xx controllers. These IP cores are

mmc: tmio: split core functionality, DMA and MFD glue

TMIO MMC chips contain an SD / SDIO IP core from Panasonic, similar to
the one, used in MN5774 and other MN57xx controllers. These IP cores are
included in many multifunction devices, in sh-mobile chips from Renesas,
in the latter case they can also use DMA. Some sh-mobile implementations
also have some other specialities, that MFD-based solutions don't have.
This makes supporting all these features in a monolithic driver inconveniet
and error-prone. This patch splits the driver into 3 parts: the core,
the MFD glue and the DMA support. In case of a modular build, two modules
will be built: mmc_tmio_core and mmc_tmio.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: mxs-mmc: add mmc host driver for i.MX23/28

This adds the mmc host driver for Freescale MXS-based SoC i.MX23/28.
The driver calls into mxs-dma via generic dmaengine api for both pio
and data tra

mmc: mxs-mmc: add mmc host driver for i.MX23/28

This adds the mmc host driver for Freescale MXS-based SoC i.MX23/28.
The driver calls into mxs-dma via generic dmaengine api for both pio
and data transfer.

Thanks Chris Ball for the indentation patch.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.

This adds the mmc host driver for the Synopsys DesignWare mmc
host controller, found in a number of embedded SoC designs.

Signed-off-by: Will N

mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.

This adds the mmc host driver for the Synopsys DesignWare mmc
host controller, found in a number of embedded SoC designs.

Signed-off-by: Will Newton <will.newton@imgtec.com>
Reviewed-by: Matt Fleming <matt@console-pimps.org>
Reviewed-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: add sdhci-tegra driver for Tegra SoCs

SDHCI driver for Tegra. This driver plugs in as a new variant of
sdhci-pltfm, using the platform data structure passed in to specify the
GPIOs to use for c

mmc: add sdhci-tegra driver for Tegra SoCs

SDHCI driver for Tegra. This driver plugs in as a new variant of
sdhci-pltfm, using the platform data structure passed in to specify the
GPIOs to use for card detect, write protect and card power enablement.

Original driver (of which only the header file is left):
Signed-off-by: Yvonne Yip <y@palm.com>

The rest, which has been rewritten by now:
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: Add support for the Marvell Dove SDHCI controller

Implement an sdhci-pltfm driver for the controller found in the
Marvell Dove SoC.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
CC: Saeed

mmc: Add support for the Marvell Dove SDHCI controller

Implement an sdhci-pltfm driver for the controller found in the
Marvell Dove SoC.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
CC: Saeed Bishara <saeed@marvell.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: add new sdhci-pxa driver for Marvell SoCs

Support Marvell PXA168/PXA910/MMP2 SD Host Controller.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang

mmc: add new sdhci-pxa driver for Marvell SoCs

Support Marvell PXA168/PXA910/MMP2 SD Host Controller.

Signed-off-by: Zhangfei Gao <zhangfei.gao@marvell.com>
Acked-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: sdhci-pltfm: add -pltfm driver for imx35/51

This driver adds basic support for the esdhc-core found on e.g.
imx35/51, as a platform driver.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>

mmc: sdhci-pltfm: add -pltfm driver for imx35/51

This driver adds basic support for the esdhc-core found on e.g.
imx35/51, as a platform driver.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: Makefile: Fix EXTRA_CFLAGS assignment

The EXTRA_CFLAGS assignment in mmc/Makefile was not accomplishing
anything because this flag only has effect on sources at the same level
as the makefile (

mmc: Makefile: Fix EXTRA_CFLAGS assignment

The EXTRA_CFLAGS assignment in mmc/Makefile was not accomplishing
anything because this flag only has effect on sources at the same level
as the makefile (i.e., per directory). Since card/, core/, and host/
rely on MMC_DEBUG, the subdir-ccflags-y variant seems to be the
appropriate choice.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

mmc: USB SD Host Controller (USHC) driver

Add a driver for USB SD Host Controller devices. These devices are
Cypress Astoria chips with firmware compliant with issue 2 of CSR's USHC
specification.

mmc: USB SD Host Controller (USHC) driver

Add a driver for USB SD Host Controller devices. These devices are
Cypress Astoria chips with firmware compliant with issue 2 of CSR's USHC
specification.

[cjb: adapt to block layer deprecation of max_{hw,phys}_segs]
Signed-off-by: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Chris Ball <cjb@laptop.org>

show more ...

sdhci-pltfm: add support for CNS3xxx SoC devices

There's nothing special, just SoC-specific ops and quirks.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Ben Dooks <ben@simtec.co.uk>
C

sdhci-pltfm: add support for CNS3xxx SoC devices

There's nothing special, just SoC-specific ops and quirks.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: Richard R?jfors <richard.rojfors@pelagicore.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

sdhci-pltfm: reorganize Makefile entries to support SoC devices

Due to build system limitations, intermediate and final objects can't have
the same names. And as we're going to start building SoC-s

sdhci-pltfm: reorganize Makefile entries to support SoC devices

Due to build system limitations, intermediate and final objects can't have
the same names. And as we're going to start building SoC-specific
objects, let's rename the module to sdhci-platform, into which we'll link
sdhci-pltfm and SoC-specifc objects.

There should be no issue in renaming as the driver uses modalias
mechanism.

This is exactly the same approach as in sdhci-of driver.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Ben Dooks <ben@simtec.co.uk>
Cc: Richard R?jfors <richard.rojfors@pelagicore.com>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

show more ...

mmc: msm_sdcc: Rename config MMC_MSM7X00A to MMC_MSM

SD/MMC host controller driver is same for all MSM and QSD
platforms. Hence, rename the config to reflect the same.

Signed-off-by: Sahitya Tummal

mmc: msm_sdcc: Rename config MMC_MSM7X00A to MMC_MSM

SD/MMC host controller driver is same for all MSM and QSD
platforms. Hence, rename the config to reflect the same.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Daniel Walker <dwalker@codeaurora.org>

show more ...

MMC: Add support for the controller on JZ4740 SoCs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Andrew Morton <akpm@linux-foundation.org>

MMC: Add support for the controller on JZ4740 SoCs.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Matt Fleming <matt@console-pimps.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: linux-mmc@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1463/
Patchwork: https://patchwork.linux-mips.org/patch/1523/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

show more ...