Revision tags: v4.19.21 |
|
#
4720eb47 |
| 11-Feb-2019 |
Krzysztof Kozlowski <krzk@kernel.org> |
mfd: sec-core: Cleanup formatting to a consistent style Cleanup the formatting to have consistent style across the file (only white-space issues). No expected difference in code.
mfd: sec-core: Cleanup formatting to a consistent style Cleanup the formatting to have consistent style across the file (only white-space issues). No expected difference in code. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.19.20, v4.19.19 |
|
#
83761f96 |
| 29-Jan-2019 |
Krzysztof Kozlowski <krzk@kernel.org> |
mfd: sec-core: Return gracefully instead of BUG() if device cannot match Replace impossible BUG() in probe with a proper return. This can be triggered only in case of a clear bug (e.g.
mfd: sec-core: Return gracefully instead of BUG() if device cannot match Replace impossible BUG() in probe with a proper return. This can be triggered only in case of a clear bug (e.g. adding broken half-support for new S2MPSXX flavor) but BUG() is discouraged and the boot process can actually try to continue. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.19.18, v4.19.17, v4.19.16, v4.19.15, v4.19.14, v4.19.13, v4.19.12, v4.19.11, v4.19.10, v4.19.9, v4.19.8, v4.19.7, v4.19.6, v4.19.5, v4.19.4, v4.18.20, v4.19.3, v4.18.19, v4.19.2, v4.18.18, v4.18.17, v4.19.1, v4.19, v4.18.16, v4.18.15, v4.18.14, v4.18.13, v4.18.12, v4.18.11, v4.18.10, v4.18.9, v4.18.7, v4.18.6, v4.18.5, v4.17.18, v4.18.4, v4.18.3, v4.17.17, v4.18.2, v4.17.16, v4.17.15, v4.18.1, v4.18, v4.17.14 |
|
#
39b27ad9 |
| 07-Aug-2018 |
Krzysztof Kozlowski <krzk@kernel.org> |
mfd: sec-core: Add SPDX license identifiers Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-b
mfd: sec-core: Add SPDX license identifiers Replace GPL v2.0+ license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.17.13, v4.17.12, v4.17.11 |
|
#
fe8166c9 |
| 25-Jul-2018 |
Krzysztof Kozlowski <krzk@kernel.org> |
mfd: sec-core: Export OF module alias table In case of Device Tree platforms, even though the Samsung PMIC sec device is instantiated from DT, the driver is still matched through I2C
mfd: sec-core: Export OF module alias table In case of Device Tree platforms, even though the Samsung PMIC sec device is instantiated from DT, the driver is still matched through I2C module alias. That is because I2C core always reports an I2C module alias instead of DT one. This could change in the future so export DT module alias. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.17.10, v4.17.9, v4.17.8, v4.17.7, v4.17.6, v4.17.5, v4.17.4, v4.17.3, v4.17.2, v4.17.1, v4.17, v4.16, v4.15, v4.13.16, v4.14, v4.13.5, v4.13, v4.12, v4.10.17, v4.10.16, v4.10.15, v4.10.14, v4.10.13, v4.10.12, v4.10.11, v4.10.10, v4.10.9, v4.10.8, v4.10.7, v4.10.6, v4.10.5, v4.10.4, v4.10.3, v4.10.2, v4.10.1, v4.10, v4.9, openbmc-4.4-20161121-1, v4.4.33, v4.4.32, v4.4.31, v4.4.30, v4.4.29, v4.4.28, v4.4.27, v4.7.10, openbmc-4.4-20161021-1, v4.7.9, v4.4.26, v4.7.8, v4.4.25, v4.4.24, v4.7.7, v4.8, v4.4.23, v4.7.6, v4.7.5, v4.4.22, v4.4.21, v4.7.4, v4.7.3, v4.4.20, v4.7.2, v4.4.19, openbmc-4.4-20160819-1, v4.7.1, v4.4.18, v4.4.17, openbmc-4.4-20160804-1, v4.4.16, v4.7, openbmc-4.4-20160722-1, openbmc-20160722-1, openbmc-20160713-1, v4.4.15, v4.6.4, v4.6.3, v4.4.14, v4.6.2, v4.4.13, openbmc-20160606-1, v4.6.1, v4.4.12, openbmc-20160521-1, v4.4.11, openbmc-20160518-1, v4.6, v4.4.10, openbmc-20160511-1, openbmc-20160505-1, v4.4.9 |
|
#
3dc6f4aa |
| 21-Apr-2016 |
Laxman Dewangan <ldewangan@nvidia.com> |
mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration.
mfd: sec: Use devm_mfd_add_devices and devm_regmap_add_irq_chip Use devm_mfd_add_devices() for adding MFD child devices and devm_regmap_add_irq_chip() for IRQ chip registration. This reduces the error code path and .remove callback for removing MFD child devices and deleting IRQ chip data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.4.8, v4.4.7, openbmc-20160329-2, openbmc-20160329-1, openbmc-20160321-1, v4.4.6, v4.5, v4.4.5, v4.4.4, v4.4.3, openbmc-20160222-1, v4.4.2, openbmc-20160212-1, openbmc-20160210-1, openbmc-20160202-2, openbmc-20160202-1, v4.4.1, openbmc-20160127-1, openbmc-20160120-1, v4.4 |
|
#
1b5420e1 |
| 28-Dec-2015 |
Geliang Tang <geliangtang@163.com> |
mfd: Use to_i2c_client() instead of open-coding it Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
Revision tags: openbmc-20151217-1, openbmc-20151210-1, openbmc-20151202-1, openbmc-20151123-1 |
|
#
2fadbbf0 |
| 20-Nov-2015 |
Alim Akhtar <alim.akhtar@samsung.com> |
mfd: sec-core: Rename MFD and regulator names differently Currently S2MPSXX multifunction device is named as *-pmic, and these MFDs also supports regulator as a one of its MFD cell which
mfd: sec-core: Rename MFD and regulator names differently Currently S2MPSXX multifunction device is named as *-pmic, and these MFDs also supports regulator as a one of its MFD cell which has the same name, because current name is confusing and we want to sort it out. We did discussed different approaches about how the MFD and it cells need to be named here [1]. Based in the discussion this patch rename MFD regulator name as *-regulator instead of current *-pmic. This patch also changes the corresponding entries in the regulator driver to keep git-bisect happy. [1]-> https://lkml.org/lkml/2015/10/28/417 Suggested-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
9e4808d2 |
| 20-Nov-2015 |
Thomas Abraham <thomas.ab@samsung.com> |
mfd: sec: Add support for S2MPS15 PMIC Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15 PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KH
mfd: sec: Add support for S2MPS15 PMIC Add support for S2MPS15 PMIC which is similar to S2MPS11 PMIC. The S2MPS15 PMIC supports 27 LDO regulators, 10 buck regulators, RTC, three 32.768KHz clock outputs and battery charger. This patch adds initial support for LDO and buck regulators of S2MPS15 device. Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> [Alim: Added s2mps15_devs like rtc and clk and related changes] Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: openbmc-20151118-1, openbmc-20151104-1, v4.3, openbmc-20151102-1 |
|
#
644a3746 |
| 30-Oct-2015 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children The commit 54e8827d5f0e ("mfd: sec-core: Add support for S2MPU02 device") added new MFD child devices for S2MPU02: RTC a
mfd: sec-core: Remove unused s2mpu02-rtc and s2mpu02-clk children The commit 54e8827d5f0e ("mfd: sec-core: Add support for S2MPU02 device") added new MFD child devices for S2MPU02: RTC and clock provider (the clock provider with new compatible). However support for these devices was not added to existing drivers (rtc-s5m, clk-s2mps11). New drivers were not submitted neither. This means that the name of children devices is completely unused. The "samsung,s2mpu02-clk" compatible remains undocumented so it is unclear what is provided by that compatible. Clean up this by removing unused child devices and undocumented compatible. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: openbmc-20151028-1 |
|
#
8a97d428 |
| 06-Oct-2015 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec-core: Disable buck voltage reset on watchdog falling edge The WRSTBI bit (disabled by default but enabled by bootloader), when set, is responsible for resetting voltages to defa
mfd: sec-core: Disable buck voltage reset on watchdog falling edge The WRSTBI bit (disabled by default but enabled by bootloader), when set, is responsible for resetting voltages to default values of certain bucks on falling edge of Warm Reset Input pin from AP. However on some boards (with S2MPS13) the pin is pulled down so any suspend will effectively trigger the reset of bucks supplying the power to the little and big cores. In the same time when resuming, these bucks must provide voltage greater or equal to voltage before suspend to match the frequency chosen by cpufreq. If voltage (default value of voltage after reset) is lower than one set by cpufreq before suspend, then system will hang during resuming. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
c2c9f1fe |
| 06-Oct-2015 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec-core: Dump PMIC revision to find out the HW There are different revisions of the same chipset. For example S2MPS13 has more than 2 revisions. They differ slightly in regulator c
mfd: sec-core: Dump PMIC revision to find out the HW There are different revisions of the same chipset. For example S2MPS13 has more than 2 revisions. They differ slightly in regulator constraints. Print the revision number to easily find which PMIC is used on the board. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
d785334a |
| 14-Sep-2015 |
Krzysztof Kozlowski <k.kozlowski.k@gmail.com> |
mfd: s2mps11: Add manual shutdown method for Odroid XU3 On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1 register must be manually set to 0 before initiating power off se
mfd: s2mps11: Add manual shutdown method for Odroid XU3 On Odroid XU3 board (with S2MPS11 PMIC) the PWRHOLD bit in CTRL1 register must be manually set to 0 before initiating power off sequence. One of usual power down methods for Exynos based devices looks like: 1. PWRHOLD pin of PMIC is connected to PSHOLD of Exynos SoC. 2. Exynos holds up this pin during system operation. 3. ACOKB pin of PMIC is pulled up to VBATT and optionally to pin in other device. 4. When PWRHOLD/PSHOLD goes low, the PMIC will turn off the power if ACOKB goes high. On Odroid XU3 family the difference is in (3) - the ACOKB is grounded. This means that PMIC must manually set PWRHOLD field to low and then wait for signal from Application Processor (the usual change in PWRHOLD/PSHOLD pin will actually cut off the power). The patch adds respective binding allowing Odroid XU3 device to be powered off. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reported-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.3-rc1, v4.2, v4.2-rc8, v4.2-rc7, v4.2-rc6, v4.2-rc5, v4.2-rc4, v4.2-rc3, v4.2-rc2 |
|
#
0e777366 |
| 10-Jul-2015 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: Drop owner assignment from i2c_drivers i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@s
mfd: Drop owner assignment from i2c_drivers i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.2-rc1, v4.1, v4.1-rc8, v4.1-rc7, v4.1-rc6, v4.1-rc5, v4.1-rc4, v4.1-rc3, v4.1-rc2, v4.1-rc1, v4.0, v4.0-rc7, v4.0-rc6, v4.0-rc5 |
|
#
eea2e596 |
| 17-Mar-2015 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec-core: Enable RTC on S2MPS11 PMIC The S2MPS11 PMIC (present on Arndale Octa board) has the same RTC module as S2MPS14 device. Add respective mfd cell to enable it. Signe
mfd: sec-core: Enable RTC on S2MPS11 PMIC The S2MPS11 PMIC (present on Arndale Octa board) has the same RTC module as S2MPS14 device. Add respective mfd cell to enable it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.0-rc4, v4.0-rc3, v4.0-rc2 |
|
#
82a00c49 |
| 26-Feb-2015 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec: Remove unnecessary out of memory message There is no need to print additional ENOMEM message for sec_platform_data allocation failure. Signed-off-by: Krzysztof Kozlows
mfd: sec: Remove unnecessary out of memory message There is no need to print additional ENOMEM message for sec_platform_data allocation failure. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
ef9c80b3 |
| 26-Feb-2015 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec: Cleanup unused RTC fields: ono, WTSR and SMPL The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary Power Loss) were removed from rtc-s5m driver because they were
mfd: sec: Cleanup unused RTC fields: ono, WTSR and SMPL The WTSR (Watchdog Timer Software Reset) and SMPL (Sudden Momentary Power Loss) were removed from rtc-s5m driver because they were not used. Remove them (and on/off interrupt) from main MFD driver and header. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v4.0-rc1, v3.19, v3.19-rc7, v3.19-rc6, v3.19-rc5, v3.19-rc4, v3.19-rc3, v3.19-rc2, v3.19-rc1, v3.18, v3.18-rc7, v3.18-rc6, v3.18-rc5, v3.18-rc4, v3.18-rc3, v3.18-rc2 |
|
#
6ce286f1 |
| 20-Oct-2014 |
Javier Martinez Canillas <javier.martinez@collabora.co.uk> |
Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption" This reverts commit b7cde7078d2344073c310aa65fc2b0a845d2cb5b ("mfd: sec-core: Prepare regulators
Revert "mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption" This reverts commit b7cde7078d2344073c310aa65fc2b0a845d2cb5b ("mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption") Commit b7cde7078d23 called regulator_suspend_prepare() to prepare the regulators for a suspend state. But it did from the device pm suspend handler while the regulator suspend prepare function iterates over all regulators and not only the one managed by this device so it doesn't seems to be correct to call it from within a device driver. It is better to call the regulator suspend prepare/finish functions from platform code instead so this patch reverts the mentioned commit. Suggested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
76b9840b |
| 18-Nov-2014 |
Chanwoo Choi <cw00.choi@samsung.com> |
regulator: s2mps11: Add support S2MPS13 regulator device This patch adds S2MPS13 regulator device to existing S2MPS11 device driver. The S2MPS13 has just different number of regulators f
regulator: s2mps11: Add support S2MPS13 regulator device This patch adds S2MPS13 regulator device to existing S2MPS11 device driver. The S2MPS13 has just different number of regulators from S2MPS14. The S2MPS13 regulator device includes LDO[1-40] and BUCK[1-10]. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
3bc2ee91 |
| 18-Nov-2014 |
Chanwoo Choi <cw00.choi@samsung.com> |
mfd: sec-core: Add support for S2MPS13 device This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD driver. The S2MPS13 is very similar with existing S2MPS14 an
mfd: sec-core: Add support for S2MPS13 device This patch adds the support for Samsung S2MPS13 PMIC device to the sec-core MFD driver. The S2MPS13 is very similar with existing S2MPS14 and includes PMIC/ RTC/CLOCK devices. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v3.18-rc1, v3.17, v3.17-rc7, v3.17-rc6, v3.17-rc5, v3.17-rc4, v3.17-rc3, v3.17-rc2, v3.17-rc1, v3.16, v3.16-rc7 |
|
#
b6c1cb4d |
| 21-Jul-2014 |
Lee Jones <lee.jones@linaro.org> |
mfd: sec-core: Fix 'missing blank line after declarations' warning This is part of an effort to clean-up the MFD subsystem. WARNING: Missing a blank line after declarations +
mfd: sec-core: Fix 'missing blank line after declarations' warning This is part of an effort to clean-up the MFD subsystem. WARNING: Missing a blank line after declarations + const struct of_device_id *match; + match = of_match_node(sec_dt_match, i2c->dev.of_node); total: 0 errors, 1 warnings, 494 lines checked Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v3.16-rc6, v3.16-rc5, v3.16-rc4, v3.16-rc3 |
|
#
b7cde707 |
| 25-Jun-2014 |
Chanwoo Choi <cw00.choi@samsung.com> |
mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption This patch use regulator_suspend_prepare() function to prepare the proper state of regulators for suspend
mfd: sec-core: Prepare regulators for suspend state to reduce power-consumption This patch use regulator_suspend_prepare() function to prepare the proper state of regulators for suspend state to remove un-necessary leakage power-consumption. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
00e2573d |
| 25-Jun-2014 |
Chanwoo Choi <cw00.choi@samsung.com> |
regulator: s2mps11: Add support S2MPU02 regulator device This patch add S2MPU02 regulator device to existing S2MPS11 device driver because of little difference between S2MPS1x and S2MPU0
regulator: s2mps11: Add support S2MPU02 regulator device This patch add S2MPU02 regulator device to existing S2MPS11 device driver because of little difference between S2MPS1x and S2MPU02. The S2MPU02 regulator device includes LDO[1-28] and BUCK[1-7]. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Add missing linear_min_sel of S2MPU02 LDO regulators by Jonghwa Lee] Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
#
54e8827d |
| 25-Jun-2014 |
Chanwoo Choi <cw00.choi@samsung.com> |
mfd: sec-core: Add support for S2MPU02 device Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver. The S2MPU02 device includes PMIC/RTC/Clock devices. Signed-
mfd: sec-core: Add support for S2MPU02 device Add support for Samsung S2MPU02 PMIC device to the MFD sec-core driver. The S2MPU02 device includes PMIC/RTC/Clock devices. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v3.16-rc2, v3.16-rc1, v3.15, v3.15-rc8, v3.15-rc7, v3.15-rc6 |
|
#
df20b7c5 |
| 13-May-2014 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec-core: Make of_device_id array const Array of struct of_device_id may be be const as expected by both of_match_table field and of_match_node() call. Signed-off-by: Krzys
mfd: sec-core: Make of_device_id array const Array of struct of_device_id may be be const as expected by both of_match_table field and of_match_node() call. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|
Revision tags: v3.15-rc5, v3.15-rc4, v3.15-rc3 |
|
#
360d15d6 |
| 22-Apr-2014 |
Krzysztof Kozlowski <k.kozlowski@samsung.com> |
mfd: sec-core: Fix IRQ handling after resume if this is not a wakeup source During suspend the IRQ should be disabled even if this is not a wakeup source. This is a proper way of fixing
mfd: sec-core: Fix IRQ handling after resume if this is not a wakeup source During suspend the IRQ should be disabled even if this is not a wakeup source. This is a proper way of fixing the IRQ handling issue during resume (IRQ handler fails because I2C bus did not resume yet). When device is suspended and sec-core interrupt is signaled the irq chip will try to handle it regardless of wakeup source. Device could be woken up by different IRQ but still the IRQ handler will try to read the registers over I2C bus and fail because I2C bus won't be ready yet. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
show more ...
|