Input: wistron_btns - support Prestigio Wifi RF kill button

The Prestigio 157, an old no-name clone laptop uses input keys very
similar to the Wistron 1557/MS2141 with the addition of BIOS-controlle

Input: wistron_btns - support Prestigio Wifi RF kill button

The Prestigio 157, an old no-name clone laptop uses input keys very
similar to the Wistron 1557/MS2141 with the addition of BIOS-controlled
wireless radio frequency kill switch.

This patch adds support for the RF kill switch control and adds manual
identification of the model.

The Prestigio does not expose any recognisable identity via dmidecode
and so requires manual selection at module init using

force=1 keymap=prestigio

Signed-off-by: TJ <ubuntu@tjworld.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron_btns - recognize Maxdata Pro 7000 notebooks

This patch adds DMI information to automatically load the correct
layout for the Maxdata Pro 7000X/DX notebook models. Such notebooks
are c

Input: wistron_btns - recognize Maxdata Pro 7000 notebooks

This patch adds DMI information to automatically load the correct
layout for the Maxdata Pro 7000X/DX notebook models. Such notebooks
are clones of Fujitsu Amilo V2000, the hook for the v2000 is being
used and I have tested that perfectly works.

The immediate result of integrating this patch is that the five
special buttons will work on these specific notebook models and that
the RF killswitch will not be activated after suspend. This patch
definitively obsoletes the fsam7400 module which I was still needing
to enable wifi and to fix the RF killswitch suspend problem; in the
current 2.6.30 kernel it is necessary to load the wistron_btns module
with options 'force=1 keymap=1557/MS2141', which was not anyway a
complete workaround.

Signed-off-by: Giuseppe Mazzotta <g.mazzotta@iragan.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - add support for Fujitsu-Siemens Amilo Pro v3505

Wistron button support for Fujitsu-Siemens Amilo Pro Edition V3505.

Signed-off-by: Remi Herilier <rherilier@yahoo.fr>
Signed-off-by:

Input: wistron - add support for Fujitsu-Siemens Amilo Pro v3505

Wistron button support for Fujitsu-Siemens Amilo Pro Edition V3505.

Signed-off-by: Remi Herilier <rherilier@yahoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - generate normal key event if bluetooth or wifi not present

If the subsystem is not present, instead of not doing anything, report
the key press as a normal key. This is done by modi

Input: wistron - generate normal key event if bluetooth or wifi not present

If the subsystem is not present, instead of not doing anything, report
the key press as a normal key. This is done by modifying at
initialization the copied key entry table.

Signed-off-by: Eric Piel <Eric.Piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

leds: Standardise LED naming scheme

As discussed on LKML some notion of 'function' is needed in
LED naming. This patch adds this to the documentation and
standardises existing LED drivers.

Signed-o

leds: Standardise LED naming scheme

As discussed on LKML some notion of 'function' is needed in
LED naming. This patch adds this to the documentation and
standardises existing LED drivers.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>

show more ...

drivers/firmware: const-ify DMI API and internals

Three main sets of changes:

1) dmi_get_system_info() return value should have been marked const,
since callers should not be changing that data.

drivers/firmware: const-ify DMI API and internals

Three main sets of changes:

1) dmi_get_system_info() return value should have been marked const,
since callers should not be changing that data.

2) const-ify DMI internals, since DMI firmware tables should,
whenever possible, be marked const to ensure we never ever write to
that data area.

3) const-ify DMI API, to enable marking tables const where possible
in low-level drivers.

And if we're really lucky, this might enable some additional
optimizations on the part of the compiler.

The bulk of the changes are #2 and #3, which are interrelated. #1 could
have been a separate patch, but it was so small compared to the others,
it was easier to roll it into this changeset.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

show more ...

Input: wistron - add support for querying/changing keymap

Implement getkeycode and setkeycode methods for the device so
EVIOCGKEYCODE and EVIOCSKEYCODE ioctls will work.

Signed-off-by: Dmitry Torok

Input: wistron - add support for querying/changing keymap

Implement getkeycode and setkeycode methods for the device so
EVIOCGKEYCODE and EVIOCSKEYCODE ioctls will work.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - convert to use input-polldev

Switch to using input-polldev skeleton instead of implementing
polling loop by itself.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: wistron - add LED support

Add support to wistron_btns for leds that come with the multimedia keys.
Mail and wifi leds are supported, on laptops which have them.

Depending on the laptop, wifi

Input: wistron - add LED support

Add support to wistron_btns for leds that come with the multimedia keys.
Mail and wifi leds are supported, on laptops which have them.

Depending on the laptop, wifi subsystem may control just the led, or both
the led and the wifi card. Wifi led interface is activated only for the
former type of laptops, as the latter type is already managed. Leds are
controled by the interface in /sys/class/leds.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wriston - reduce polling frequency

Reduces the polling frequency from 10 Hz to 2 Hz, which should be less a burden
for laptops wrt energy saving. As it is multimedia keys, 500ms (maximum) of

Input: wriston - reduce polling frequency

Reduces the polling frequency from 10 Hz to 2 Hz, which should be less a burden
for laptops wrt energy saving. As it is multimedia keys, 500ms (maximum) of
latency should be still fine for the user. In order to keep fluent the feeling
when the user is pressing several keys in a raw (such as changing the volume),
the frequency is increased for a short duration after a key is pressed.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - fix typo in keymap for Acer TM610

This patch fixes typo that prevented PROG2 key from working
on Acer Travelmate 610.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-o

Input: wistron - fix typo in keymap for Acer TM610

This patch fixes typo that prevented PROG2 key from working
on Acer Travelmate 610.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - declare keymaps as initdata

As the number of keymaps increases and is very unlikely to
reduce, this patch helps to reduce memory consumption by
declaring all keymaps as __initdata a

Input: wistron - declare keymaps as initdata

As the number of keymaps increases and is very unlikely to
reduce, this patch helps to reduce memory consumption by
declaring all keymaps as __initdata and copying right keymap
during DMI detection. On x86 this make the module size at
runtime going from 10616 to 9428: a bit more than 1kb saved.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - introduce generic keymap

It turns out that the keymaps in the wistron driver are almost the
same, the main difference being some keys which may not exist and
leds which might not be

Input: wistron - introduce generic keymap

It turns out that the keymaps in the wistron driver are almost the
same, the main difference being some keys which may not exist and
leds which might not be present. Therefore it's possible to write
a generic keymap which would allow the use of an unknown keyboard
with little drawbacks. The user can select it specifying the parameter
"keymap=generic".

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - add acerhk laptop database

Acerhk supports already a lot of laptops. Lets import its database so
that everyone can benefit of the work of Olaf Tauber. Only the "tm_new"
laptops were

Input: wistron - add acerhk laptop database

Acerhk supports already a lot of laptops. Lets import its database so
that everyone can benefit of the work of Olaf Tauber. Only the "tm_new"
laptops were imported. "tm_old" laptops could be possible but requires
more testing and probably only few laptops are still alive. "dritek"
laptops should probably be imported into a different driver. Also compress
the keymaps by fitting each entry on an int. Most of the dmi matching was
written based on google searches, so it's rather prone to errors. That's
why I'm asking people to confirm it works.

Support to generate switch input events was added as some laptops indicate
lid open/close through this interface.

This adds the following hardware:
Acer TravelMate 370
Acer TravelMate 380
Acer TravelMate C300
Acer TravelMate C100
Acer TravelMate C110
Acer TravelMate 250
Acer TravelMate 350
Acer TravelMate 620
Acer TravelMate 630
Acer TravelMate 220
Acer TravelMate 230
Acer TravelMate 260
Acer TravelMate 280
Acer TravelMate 360
Acer TravelMate 2100
Acer TravelMate 2410
Acer Aspire 1500
Acer Aspire 1600
Acer Aspire 3020
Acer Aspire 5020
Medion MD 2900
Medion MD 40100
Medion MD 95400
Medion MD 96500
Fujitsu Siemens Amilo 7820

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - add support for TravelMate 610

Add support for Acer TravelMate 610 to wistron_btns. All special keys
are detected, but the 2 leds are not handled (yet).

Signed-off-by: Eric Piel <e

Input: wistron - add support for TravelMate 610

Add support for Acer TravelMate 610 to wistron_btns. All special keys
are detected, but the 2 leds are not handled (yet).

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - add support for Fujitsu-Siemens Amilo D88x0

Tested on a Amilo D8820.

Signed-off-by: Michael Leun <ml@newton.leun.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

[PATCH] Use linux/io.h instead of asm/io.h

In preparation for moving check_signature, change these users from asm/io.h
to linux/io.h

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-of

[PATCH] Use linux/io.h instead of asm/io.h

In preparation for moving check_signature, change these users from asm/io.h
to linux/io.h

Signed-off-by: Matthew Wilcox <willy@parisc-linux.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

show more ...

Input: wistron - add support for Acer TravelMate 2424NWXCi

The key mappings are the same as the older Acer TravelMate 240.

Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Signed-off-by: Andr

Input: wistron - add support for Acer TravelMate 2424NWXCi

The key mappings are the same as the older Acer TravelMate 240.

Signed-off-by: Ashutosh Naik <ashutosh.naik@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - fix setting up special buttons

If either wifi or bluetooth button has been detected, the code
would break off the loop. But there are laptops that have both
types of buttons, so the

Input: wistron - fix setting up special buttons

If either wifi or bluetooth button has been detected, the code
would break off the loop. But there are laptops that have both
types of buttons, so the loop has to continue checking.

Signed-off-by: Reiner Herrmann <reiner@reiner-h.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - fix crash due to referencing __initdata

Remove __initdata markings from keymaps as they are used during
normal driver operations.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: wistron - fix section reference mismatches

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: wistron - add mapping for Wistron MS 2111

Wistron MS 2111 (aka Medion 'Titanium' MD 9783, aka ALDI PC,
aka Fujitsu-Siemens AMILO D7800, aka ...) has 5 extra buttons,
map them. Unfortunately w

Input: wistron - add mapping for Wistron MS 2111

Wistron MS 2111 (aka Medion 'Titanium' MD 9783, aka ALDI PC,
aka Fujitsu-Siemens AMILO D7800, aka ...) has 5 extra buttons,
map them. Unfortunately we only have DMI data for the Medion
box.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

show more ...

Input: wistron - add support for AOpen Barebook 1559as

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: wistron - add support for Fujitsu N3510

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Input: wistron - add signature for Amilo M7400

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>