Revision tags: v2.6.38-rc5 |
|
#
4dfcc271 |
| 11-Feb-2011 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: uinput - use memdup_user() and friends Instead of open-coding copying of data structures from userspace use memdup_user() and strndup_user(). Note that this introduces change in
Input: uinput - use memdup_user() and friends Instead of open-coding copying of data structures from userspace use memdup_user() and strndup_user(). Note that this introduces change in behavior because driver used to truncate 'phys' longer than 1024 bytes, but now it will refuse to set 'phys' that long. Arguably trying to set such 'phys' is suspect anyways. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
#
5d9d6e91 |
| 11-Feb-2011 |
David Herrmann <dh.herrmann@googlemail.com> |
Input: uinput - fix setting up device name The check for non-empty device name was botched since we tried to account for extra space for the terminating zero at the same time. Convert to
Input: uinput - fix setting up device name The check for non-empty device name was botched since we tried to account for extra space for the terminating zero at the same time. Convert to kstrndup() to avoid this problem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Aristeu Rozanski <aris@ruivo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.38-rc4, v2.6.38-rc3, v2.6.38-rc2, v2.6.38-rc1, v2.6.37, v2.6.37-rc8, v2.6.37-rc7 |
|
#
85b77200 |
| 18-Dec-2010 |
Henrik Rydberg <rydberg@euromail.se> |
Input: introduce device properties Today, userspace sets up an input device based on the data it emits. This is not always enough; a tablet and a touchscreen may emit exactly the sam
Input: introduce device properties Today, userspace sets up an input device based on the data it emits. This is not always enough; a tablet and a touchscreen may emit exactly the same data, for instance, but the former should be set up with a pointer whereas the latter does not need to. Recently, a new type of touchpad has emerged where the buttons are under the pad, which changes logic without changing the emitted data. This patch introduces a new ioctl, EVIOCGPROP, which enables user access to a set of device properties useful during setup. The properties are given as a bitmap in the same fashion as the event types, and are also made available via sysfs, uevent and /proc/bus/input/devices. Acked-by: Ping Cheng <pingc@wacom.com> Acked-by: Chase Douglas <chase.douglas@canonical.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
show more ...
|
Revision tags: v2.6.37-rc6, v2.6.37-rc5, v2.6.37-rc4 |
|
#
8cde8100 |
| 27-Nov-2010 |
Henrik Rydberg <rydberg@euromail.se> |
input: mt: Collect slots initialization code The MT slots devices all follow the same initialization pattern of creating slots and hinting about buffer size. Let drivers call an init
input: mt: Collect slots initialization code The MT slots devices all follow the same initialization pattern of creating slots and hinting about buffer size. Let drivers call an initialization function instead, and make sure it can be called repeatedly without side effects. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
show more ...
|
#
47c78e89 |
| 27-Nov-2010 |
Henrik Rydberg <rydberg@euromail.se> |
input: mt: Break out slots handling In preparation for common code to handle a larger set of MT slots devices, move the slots handling over to a separate file. Signed-off-by: He
input: mt: Break out slots handling In preparation for common code to handle a larger set of MT slots devices, move the slots handling over to a separate file. Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
show more ...
|
#
092e0e7e |
| 22-Oct-2010 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl * 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default
Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl * 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
show more ...
|
Revision tags: v2.6.37-rc3, v2.6.37-rc2, v2.6.37-rc1, v2.6.36, v2.6.36-rc8, v2.6.36-rc7, v2.6.36-rc6, v2.6.36-rc5, v2.6.36-rc4, v2.6.36-rc3, v2.6.36-rc2, v2.6.36-rc1 |
|
#
6038f373 |
| 15-Aug-2010 |
Arnd Bergmann <arnd@arndb.de> |
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek poin
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
show more ...
|
#
38e7afe9 |
| 19-Sep-2010 |
Henrik Rydberg <rydberg@euromail.se> |
Input: uinput - setup MT usage during device creation The input devices created by uinput do not currently handle multitouch properly. All events will appear as if they came from slot ze
Input: uinput - setup MT usage during device creation The input devices created by uinput do not currently handle multitouch properly. All events will appear as if they came from slot zero, and the input event buffers are not adjusted. This patch creates the MT slots during setup, and sets the number of events per packet based on the MT usage. Signed-off-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
#
8905aaaf |
| 19-Aug-2010 |
Kay Sievers <kay.sievers@vrfy.org> |
Input: uinput - add devname alias to allow module on-demand load Recent modprobe and udev versions allow to create device nodes for modules which are not loaded. Only the first access wi
Input: uinput - add devname alias to allow module on-demand load Recent modprobe and udev versions allow to create device nodes for modules which are not loaded. Only the first access will cause the in-kernel module loader to pull-in the module. Systems which never access the device node will not needlessly load the module, and no longer need init scripts or other facilities to unconditionally load it. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
#
987a6c02 |
| 02-Aug-2010 |
Daniel Mack <daniel@caiaq.de> |
Input: switch to input_abs_*() access functions Change all call sites in drivers/input to not access the ABS axis information directly anymore. Make them use the access helpers instead.
Input: switch to input_abs_*() access functions Change all call sites in drivers/input to not access the ABS axis information directly anymore. Make them use the access helpers instead. Also use input_set_abs_params() when possible. Did some code refactoring as I was on it. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.35, v2.6.35-rc6, v2.6.35-rc5, v2.6.35-rc4, v2.6.35-rc3, v2.6.35-rc2, v2.6.35-rc1 |
|
#
81c2a3ba |
| 21-May-2010 |
Daniel Mack <daniel@caiaq.de> |
Input: use ABS_CNT rather than (ABS_MAX + 1) Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
Revision tags: v2.6.34, v2.6.34-rc7, v2.6.34-rc6, v2.6.34-rc5, v2.6.34-rc4, v2.6.34-rc3, v2.6.34-rc2, v2.6.34-rc1, v2.6.33, v2.6.33-rc8, v2.6.33-rc7 |
|
#
daf8a96b |
| 04-Feb-2010 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Input: uinput - mark as non-seekable Seeking does not make sense for uinput so let's use nonseekable_open to mark the device non-seekable. Signed-off-by: Dmitry Torokhov <dtor@m
Input: uinput - mark as non-seekable Seeking does not make sense for uinput so let's use nonseekable_open to mark the device non-seekable. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
#
45cdba4d |
| 30-Jan-2010 |
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> |
Input: uinput - remove BKL from uinput_open function Commit 8702965848ed4bee27486a3e3d2ae34ebba6dd83 pushed down the BKL into uinput open function. However, there's nothing that needs lo
Input: uinput - remove BKL from uinput_open function Commit 8702965848ed4bee27486a3e3d2ae34ebba6dd83 pushed down the BKL into uinput open function. However, there's nothing that needs locking in there. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.33-rc6, v2.6.33-rc5, v2.6.33-rc4, v2.6.33-rc3, v2.6.33-rc2, v2.6.33-rc1, v2.6.32, v2.6.32-rc8, v2.6.32-rc7, v2.6.32-rc6, v2.6.32-rc5, v2.6.32-rc4, v2.6.32-rc3 |
|
#
a99bbaf5 |
| 04-Oct-2009 |
Alexey Dobriyan <adobriyan@gmail.com> |
headers: remove sched.h from poll.h Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Revision tags: v2.6.32-rc1, v2.6.32-rc2, v2.6.31, v2.6.31-rc9, v2.6.31-rc8, v2.6.31-rc7, v2.6.31-rc6, v2.6.31-rc5, v2.6.31-rc4, v2.6.31-rc3, v2.6.31-rc2, v2.6.31-rc1, v2.6.30, v2.6.30-rc8, v2.6.30-rc7, v2.6.30-rc6 |
|
#
05cebd38 |
| 15-May-2009 |
Aristeu Sergio Rozanski Filho <aris@ruivo.org> |
Input: uinput - flush all pending ff effects before destroying device The destruction of a input device in uinput is triggered by an ioctl(). If a process tries to destroy an input devic
Input: uinput - flush all pending ff effects before destroying device The destruction of a input device in uinput is triggered by an ioctl(). If a process tries to destroy an input device while other is uploading a force feedback effect by evdev to the same device, they'll deadlock. This patch fixes the problem by flushing all pending FF uploads before destroying the device and preventing new uploads during this operation. [dtor@mail.ru: fix logic that ensures we don't submit new requests to the device that is being destroyed.] Signed-off-by: Aristeu Rozanski <aris@redhat.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.30-rc5, v2.6.30-rc4, v2.6.30-rc3, v2.6.30-rc2, v2.6.30-rc1, v2.6.29, v2.6.29-rc8, v2.6.29-rc7, v2.6.29-rc6, v2.6.29-rc5, v2.6.29-rc4, v2.6.29-rc3, v2.6.29-rc2, v2.6.29-rc1, v2.6.28, v2.6.28-rc9, v2.6.28-rc8, v2.6.28-rc7, v2.6.28-rc6, v2.6.28-rc5, v2.6.28-rc4, v2.6.28-rc3, v2.6.28-rc2, v2.6.28-rc1 |
|
#
2d56f3a3 |
| 16-Oct-2008 |
Philip Langdale <philipl@overt.org> |
Input: refactor evdev 32bit compat to be shareable with uinput Currently, evdev has working 32bit compatibility and uinput does not. uinput needs the input_event code that evdev uses, so
Input: refactor evdev 32bit compat to be shareable with uinput Currently, evdev has working 32bit compatibility and uinput does not. uinput needs the input_event code that evdev uses, so let's refactor it so it can be shared. [dtor@mail.ru: add fix for force feedback compat issues] Signed-off-by: Philip Langdale <philipl@overt.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.27, v2.6.27-rc9, v2.6.27-rc8, v2.6.27-rc7, v2.6.27-rc6, v2.6.27-rc5, v2.6.27-rc4, v2.6.27-rc3, v2.6.27-rc2, v2.6.27-rc1 |
|
#
53703659 |
| 23-Jul-2008 |
Huang Weiyi <weiyi.huang@gmail.com> |
Input: uinput - remove duplicate include Remove duplicate include file <linux/smp_lock.h> in drivers/input/misc/uinput.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Input: uinput - remove duplicate include Remove duplicate include file <linux/smp_lock.h> in drivers/input/misc/uinput.c. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.26, v2.6.26-rc9, v2.6.26-rc8, v2.6.26-rc7, v2.6.26-rc6, v2.6.26-rc5, v2.6.26-rc4 |
|
#
87029658 |
| 20-May-2008 |
Arnd Bergmann <arnd@arndb.de> |
uinput: BKL pushdown Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
Revision tags: v2.6.26-rc3, v2.6.26-rc2, v2.6.26-rc1, v2.6.25, v2.6.25-rc9, v2.6.25-rc8, v2.6.25-rc7, v2.6.25-rc6, v2.6.25-rc5, v2.6.25-rc4, v2.6.25-rc3, v2.6.25-rc2, v2.6.25-rc1, v2.6.24, v2.6.24-rc8, v2.6.24-rc7, v2.6.24-rc6, v2.6.24-rc5, v2.6.24-rc4, v2.6.24-rc3, v2.6.24-rc2, v2.6.24-rc1, v2.6.23, v2.6.23-rc9, v2.6.23-rc8, v2.6.23-rc7, v2.6.23-rc6, v2.6.23-rc5, v2.6.23-rc4, v2.6.23-rc3, v2.6.23-rc2, v2.6.23-rc1, v2.6.22, v2.6.22-rc7, v2.6.22-rc6, v2.6.22-rc5, v2.6.22-rc4, v2.6.22-rc3, v2.6.22-rc2, v2.6.22-rc1 |
|
#
a830df36 |
| 02-May-2007 |
Mike Frysinger <vapier@gentoo.org> |
Input: pull input.h into uinpit.h uinput.h relies on structures found in input.h, so pull in the header Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry T
Input: pull input.h into uinpit.h uinput.h relies on structures found in input.h, so pull in the header Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.21, v2.6.21-rc7 |
|
#
373f9713 |
| 12-Apr-2007 |
Dmitry Torokhov <dtor@insightbb.com> |
Input: drivers/input/misc - don't access dev->private directly Use input_get_drvdata() and input_set_drvdata() instead. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
Revision tags: v2.6.21-rc6, v2.6.21-rc5, v2.6.21-rc4, v2.6.21-rc3, v2.6.21-rc2, v2.6.21-rc1 |
|
#
2b8693c0 |
| 12-Feb-2007 |
Arjan van de Ven <arjan@linux.intel.com> |
[PATCH] mark struct file_operations const 3 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing w
[PATCH] mark struct file_operations const 3 Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
show more ...
|
Revision tags: v2.6.20, v2.6.20-rc7, v2.6.20-rc6, v2.6.20-rc5, v2.6.20-rc4, v2.6.20-rc3, v2.6.20-rc2, v2.6.20-rc1, v2.6.19, v2.6.19-rc6, v2.6.19-rc5, v2.6.19-rc4, v2.6.19-rc3, v2.6.19-rc2, v2.6.19-rc1, v2.6.18, v2.6.18-rc7, v2.6.18-rc6, v2.6.18-rc5, v2.6.18-rc4, v2.6.18-rc3 |
|
#
ff462551 |
| 19-Jul-2006 |
Anssi Hannula <anssi.hannula@gmail.com> |
Input: uinput - switch to the new FF interface The userspace interface of the force feedback part is changed and documentation in uinput.h is updated accordingly. MODULE_VERSION is a
Input: uinput - switch to the new FF interface The userspace interface of the force feedback part is changed and documentation in uinput.h is updated accordingly. MODULE_VERSION is also incremented to reflect the revision. Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
Revision tags: v2.6.18-rc2, v2.6.18-rc1, v2.6.17, v2.6.17-rc6, v2.6.17-rc5, v2.6.17-rc4, v2.6.17-rc3, v2.6.17-rc2, v2.6.17-rc1, v2.6.16, v2.6.16-rc6, v2.6.16-rc5 |
|
#
221979aa |
| 18-Feb-2006 |
Dmitry Torokhov <dtor_core@ameritech.net> |
Input: uinput - semaphore to mutex conversion Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|
Revision tags: v2.6.16-rc4, v2.6.16-rc3, v2.6.16-rc2, v2.6.16-rc1, v2.6.15, v2.6.15-rc7, v2.6.15-rc6, v2.6.15-rc5, v2.6.15-rc4, v2.6.15-rc3 |
|
#
e597f0c8 |
| 19-Nov-2005 |
Dmitry Torokhov <dtor_core@ameritech.net> |
Input: uinput - don't use "interruptible" in FF code If thread that submitted FF request gets interrupted somehow it will release request structure and ioctl handler will work with f
Input: uinput - don't use "interruptible" in FF code If thread that submitted FF request gets interrupted somehow it will release request structure and ioctl handler will work with freed memory. TO prevent that from happening switch to using wait_for_completion instead of wait_for_completion_interruptible. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
show more ...
|
#
59c7c037 |
| 19-Nov-2005 |
Dmitry Torokhov <dtor_core@ameritech.net> |
Input: uinput - add UI_SET_SWBIT ioctl Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
|