RDMA/bnxt_re: Honor vlan_id in GID entry comparison

A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate
check comparisons to consider vlan_id as well to support IPv

RDMA/bnxt_re: Honor vlan_id in GID entry comparison

A GID entry consists of GID, vlan, netdev and smac. Extend GID duplicate
check comparisons to consider vlan_id as well to support IPv6 VLAN based
link local addresses. Introduce a new structure (bnxt_qplib_gid_info) to
hold gid and vlan_id information.

The issue is discussed in the following thread
https://lore.kernel.org/r/AM0PR05MB4866CFEDCDF3CDA1D7D18AA5D1F20@AM0PR05MB4866.eurprd05.prod.outlook.com

Fixes: 823b23da7113 ("IB/core: Allow vlan link local address based RoCE GIDs")
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://lore.kernel.org/r/20190715091913.15726-1-selvin.xavier@broadcom.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Co-developed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA: Handle AH allocations by IB/core

Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().

RDMA: Handle AH allocations by IB/core

Simplify drivers by ensuring lifetime of ib_ah object. The changes
in .create_ah() go hand in hand with relevant update in .destroy_ah().

We will use this opportunity and convert .destroy_ah() to don't fail, as
it was suggested a long time ago, because there is nothing to do in case
of failure during destroy.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Use correct sizing on buffers holding page DMA addresses

umem->nmap is used while allocating internal buffer for storing
page DMA addresses. This causes out of bounds array

RDMA/bnxt_re: Use correct sizing on buffers holding page DMA addresses

umem->nmap is used while allocating internal buffer for storing
page DMA addresses. This causes out of bounds array access while iterating
the umem DMA-mapped SGL with umem page combining as umem->nmap can be
less than number of system pages in umem.

Use ib_umem_num_pages() instead of umem->nmap to size the page array.
Add a new structure (bnxt_qplib_sg_info) to pass sglist, npages and nmap.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Add extended psn structure for 57500 adapters

The new 57500 series of adapter has bigger psn search structure. The size
of new structure is 16B. Changing the control path

RDMA/bnxt_re: Add extended psn structure for 57500 adapters

The new 57500 series of adapter has bigger psn search structure. The size
of new structure is 16B. Changing the control path memory allocation and
fast path code to accommodate the new psn structure while maintaining the
backward compatibility.

There are few additional changes listed below:
- For 57500 chip max-sge are limited to 6 for now.
- For 57500 chip max-receive-sge should be set to 6 for now.
- Add driver/hardware interface structure for new chip.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

infiniband: bnxt_re: qplib: Check the return value of send_message

In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an
error value but it is lost. Propagate this err

infiniband: bnxt_re: qplib: Check the return value of send_message

In bnxt_qplib_map_tc2cos(), bnxt_qplib_rcfw_send_message() can return an
error value but it is lost. Propagate this error to the callers.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Acked-By: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Make use of destroy AH sleepable flag

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.

Signed-off-by: Gal Pressman

RDMA/bnxt_re: Make use of destroy AH sleepable flag

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Make use of create AH sleepable flag

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.

Signed-off-by: Gal Pressman

RDMA/bnxt_re: Make use of create AH sleepable flag

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.

Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Limit max_pkey to 16 bit value

Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of
ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF.

RDMA/bnxt_re: Limit max_pkey to 16 bit value

Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of
ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Report out of sequence hw counters

Expose out of sequence errors received from FW. This counter is a 32 bit
counter and driver has to accumulate the counter. Stores the pr

RDMA/bnxt_re: Report out of sequence hw counters

Expose out of sequence errors received from FW. This counter is a 32 bit
counter and driver has to accumulate the counter. Stores the previous
value for calculating the difference in the next query.

Also, update the HW statistics structure with new fields.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: QPLIB: Add and use #define dev_fmt(fmt) "QPLIB: " fmt

Consistently use the "QPLIB: " prefix for dev_<level> logging.

Miscellanea:

o Add missing newlines to av

RDMA/bnxt_re: QPLIB: Add and use #define dev_fmt(fmt) "QPLIB: " fmt

Consistently use the "QPLIB: " prefix for dev_<level> logging.

Miscellanea:

o Add missing newlines to avoid possible message interleaving
o Coalesce consecutive dev_<level> uses that emit a message header to
avoid < 80 column lengths and mistakenly output on multiple lines
o Reflow modified lines to use 80 columns where appropriate
o Consistently use "%s: " where __func__ is output
o QPLIB: is now always output immediately after the dev_<level> header

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Fix a couple off by one bugs

The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl().
It has sgid_tbl->max elements. So the > should be >= to prevent
acc

RDMA/bnxt_re: Fix a couple off by one bugs

The sgid_tbl->tbl[] array is allocated in bnxt_qplib_alloc_sgid_tbl().
It has sgid_tbl->max elements. So the > should be >= to prevent
accessing one element beyond the end of the array.

Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

Merge branch 'k.o/wip/dl-for-rc' into k.o/wip/dl-for-next

Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had alr

Merge branch 'k.o/wip/dl-for-rc' into k.o/wip/dl-for-next

Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.

Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e61 (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch

Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re/qplib_sp: Use true and false for boolean values

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinel

RDMA/bnxt_re/qplib_sp: Use true and false for boolean values

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Fix incorrect DB offset calculation

To support host systems with non 4K page size, l2_db_size shall be
calculated with 4096 instead of PAGE_SIZE. Also, supply the host page

RDMA/bnxt_re: Fix incorrect DB offset calculation

To support host systems with non 4K page size, l2_db_size shall be
calculated with 4096 instead of PAGE_SIZE. Also, supply the host page size
to FW during initialization.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

show more ...

RDMA/bnxt_re: Disable atomic capability on bnxt_re adapters

More testing needs to be done before enabling this feature.
Disabling the feature temporarily

Signed-off-by: Selvin X

RDMA/bnxt_re: Disable atomic capability on bnxt_re adapters

More testing needs to be done before enabling this feature.
Disabling the feature temporarily

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: expose detailed stats retrieved from HW

Broadcom's adapter supports more granular statistics
to allow better understanding about the state of the
chip when data traffic

RDMA/bnxt_re: expose detailed stats retrieved from HW

Broadcom's adapter supports more granular statistics
to allow better understanding about the state of the
chip when data traffic is flowing.

Exposing the detailed stats to the consumer through
the standard hook available in the kverbs interface.
In order to retrieve all the information, driver
implements a firmware command.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Add support for MRs with Huge pages

Depending on the OS page-table configurations, applications
may request MRs which has page size alignment other than 4K

Underly

RDMA/bnxt_re: Add support for MRs with Huge pages

Depending on the OS page-table configurations, applications
may request MRs which has page size alignment other than 4K

Underlying provider driver needs to adjust its PBL boundaries
according to the incoming page boundaries in the PA list.

Adding a capability to register MRs having pages-sizes other
than 4K (Hugepages).

Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Add support for query firmware version

The device now reports firmware version thus, removing
the hard coded values of the FW version string and
redundant fw_rev hook f

RDMA/bnxt_re: Add support for query firmware version

The device now reports firmware version thus, removing
the hard coded values of the FW version string and
redundant fw_rev hook from sysfs. Adding code to query
firmware version from underlying device and report it
through the kernel verb to get firmware version string.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Enable RoCE on virtual functions

RoCE can be used by virtual functions (VFs) as well. Adding
code changes to allow resource reservation, initialization
and avail the re

RDMA/bnxt_re: Enable RoCE on virtual functions

RoCE can be used by virtual functions (VFs) as well. Adding
code changes to allow resource reservation, initialization
and avail the resources to the RDMA applications running on
those VFs.

Currently, fifty percent of the total available resources
are reserved for PF and remaining are equally divided among
active VFs.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Remove set-but-not-used variables

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dl

RDMA/bnxt_re: Remove set-but-not-used variables

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Add vlan tag for untagged RoCE traffic when PFC is configured

Current implementation does not program vlan header insertion
in RoCE packet if no vlan is configured. Firmwar

RDMA/bnxt_re: Add vlan tag for untagged RoCE traffic when PFC is configured

Current implementation does not program vlan header insertion
in RoCE packet if no vlan is configured. Firmware does not add
prority when there is no vlan tag in the packet. Modify the code
to insert vlan header when PFC is enabled on the interface.

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Enable atomics only if host bios supports

Driver shall check if the host system bios has enabled
Atomic operations capability in PCI Device Control 2
register of the pc

RDMA/bnxt_re: Enable atomics only if host bios supports

Driver shall check if the host system bios has enabled
Atomic operations capability in PCI Device Control 2
register of the pci-device. Expose the ATOMIC_HCA
flag only if the Atomic operations capability is set.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Report supported value to IB stack in query_device

- Report supported value for max_mr_size to IB stack in query_device.
Also, check and log if MR size requested by appl

RDMA/bnxt_re: Report supported value to IB stack in query_device

- Report supported value for max_mr_size to IB stack in query_device.
Also, check and log if MR size requested by application in
reg_user_mr() is greater than value currently supported by driver.
- Report only 4K page size support for now
- Fix Max_QP value returned by ibv_devinfo -vv.
In case of PF, FW reserves 129 QPs for creating QP1s of VFs
and PF. So the max_qp value reported by FW for PF doesn'tt include
the QP1. Fixing this issue by adding 1 with the value reported
by FW.

Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: HW workarounds for handling specific conditions

This patch implements the following HW workarounds

1. The SQ depth needs to be augmented by 128 + 1 to avoid running

RDMA/bnxt_re: HW workarounds for handling specific conditions

This patch implements the following HW workarounds

1. The SQ depth needs to be augmented by 128 + 1 to avoid running
into an Out of order CQE issue
2. Workaround to handle the problem where the HW fast path engine continues
to access DMA memory in retranmission mode even after the WQE has
already been completed. If the HW reports this condition, driver detects
it and posts a Fence WQE. The driver stops reporting the completions
to stack until it receives completion for Fence WQE.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...

RDMA/bnxt_re: Fixing the Control path command and response handling

Fixing a concurrency issue with creq handling. Each caller
was given a globally managed crsq element, which was
ac

RDMA/bnxt_re: Fixing the Control path command and response handling

Fixing a concurrency issue with creq handling. Each caller
was given a globally managed crsq element, which was
accessed outside a lock. This could result in corruption,
if lot of applications are simultaneously issuing Control Path
commands. Now, each caller will provide its own response buffer
and the responses will be copied under a lock.
Also, Fixing the queue full condition check for the CMDQ.

As a part of these changes, the control path code is refactored
to remove the code replication in the response status checking.

Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

show more ...