Revision tags: v6.6.25, v6.6.24, v6.6.23, v6.6.16, v6.6.15, v6.6.14, v6.6.13, v6.6.12, v6.6.11, v6.6.10, v6.6.9, v6.6.8, v6.6.7, v6.6.6, v6.6.5, v6.6.4, v6.6.3, v6.6.2, v6.5.11, v6.6.1, v6.5.10, v6.6, v6.5.9, v6.5.8, v6.5.7, v6.5.6, v6.5.5, v6.5.4, v6.5.3, v6.5.2, v6.1.51, v6.5.1, v6.1.50, v6.5, v6.1.49, v6.1.48, v6.1.46, v6.1.45, v6.1.44, v6.1.43 |
|
#
132b6512 |
| 30-Jul-2023 |
Zhu Wang <wangzhu9@huawei.com> |
drm/bridge: fix -Wunused-const-variable= warning
When building with W=1, the following warning occurs.
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ def
drm/bridge: fix -Wunused-const-variable= warning
When building with W=1, the following warning occurs.
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx781x_i2c_addresses[] = { ^~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=] static const u8 anx7808_i2c_addresses[] = {
When CONFIG_IO is disabled, above two variables are not used, since the place where it is used is inclueded in the macro CONFIG_OF.
Even for drivers that do not depend on CONFIG_OF, it's almost always better to leave out the of_match_ptr(), since the only thing it can possibly do is to save a few bytes of .text if a driver can be used both with and without it. Hence we remove all of_match_ptr() used in other places.
Fixes: 0647e7dd3f7a ("drm/bridge: Add Analogix anx78xx support") Signed-off-by: Zhu Wang <wangzhu9@huawei.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Robert Foss <rfoss@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230731021345.219588-1-wangzhu9@huawei.com
show more ...
|
Revision tags: v6.1.42, v6.1.41, v6.1.40, v6.1.39, v6.1.38, v6.1.37, v6.1.36, v6.4, v6.1.35, v6.1.34, v6.1.33, v6.1.32, v6.1.31 |
|
#
332af828 |
| 26-May-2023 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
drm: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i
drm: Switch i2c drivers back to use .probe()
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Guenter Roeck <groeck@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230526090709.1517297-1-u.kleine-koenig@pengutronix.de
show more ...
|
Revision tags: v6.1.30, v6.1.29, v6.1.28, v6.1.27, v6.1.26, v6.3, v6.1.25, v6.1.24, v6.1.23, v6.1.22, v6.1.21, v6.1.20, v6.1.19, v6.1.18, v6.1.17, v6.1.16, v6.1.15, v6.1.14, v6.1.13, v6.2, v6.1.12, v6.1.11, v6.1.10, v6.1.9, v6.1.8, v6.1.7, v6.1.6, v6.1.5, v6.0.19, v6.0.18, v6.1.4, v6.1.3, v6.0.17, v6.1.2, v6.0.16, v6.1.1, v6.0.15, v6.0.14, v6.0.13, v6.1, v6.0.12, v6.0.11, v6.0.10, v5.15.80 |
|
#
7fcf039a |
| 18-Nov-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
drm/bridge/analogix/anx78xx: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.
drm/bridge/analogix/anx78xx: Convert to i2c's .probe_new()
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20221118224540.619276-17-uwe@kleine-koenig.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
show more ...
|
Revision tags: v6.0.9, v5.15.79, v6.0.8, v5.15.78, v6.0.7, v5.15.77, v5.15.76, v6.0.6, v6.0.5, v5.15.75, v6.0.4, v6.0.3, v6.0.2, v5.15.74, v5.15.73, v6.0.1, v5.15.72, v6.0, v5.15.71, v5.15.70, v5.15.69, v5.15.68, v5.15.67, v5.15.66, v5.15.65, v5.15.64, v5.15.63, v5.15.62, v5.15.61 |
|
#
ed5c2f5f |
| 15-Aug-2022 |
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> |
i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.)
i2c: Make remove callback return void
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.)
So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before.
Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
show more ...
|
Revision tags: v5.15.60, v5.15.59, v5.19, v5.15.58, v5.15.57, v5.15.56, v5.15.55, v5.15.54, v5.15.53, v5.15.52, v5.15.51, v5.15.50, v5.15.49, v5.15.48, v5.15.47, v5.15.46, v5.15.45, v5.15.44, v5.15.43, v5.15.42, v5.18, v5.15.41, v5.15.40, v5.15.39, v5.15.38, v5.15.37, v5.15.36 |
|
#
da68386d |
| 21-Apr-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm: Rename dp/ to display/
Rename dp/ to display/ to account for additional display-related helpers, such as HDMI. Update all related include statements. No functional changes.
Various drivers, su
drm: Rename dp/ to display/
Rename dp/ to display/ to account for additional display-related helpers, such as HDMI. Update all related include statements. No functional changes.
Various drivers, such as i915 and amdgpu, use similar naming scheme by putting code for video-output standards into a local display/ directory. The new directory's name is aligned with this convention.
v2: * update commit message (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220421073108.19226-3-tzimmermann@suse.de
show more ...
|
Revision tags: v5.15.35, v5.15.34, v5.15.33, v5.15.32, v5.15.31, v5.17, v5.15.30, v5.15.29, v5.15.28, v5.15.27, v5.15.26, v5.15.25, v5.15.24, v5.15.23, v5.15.22, v5.15.21, v5.15.20, v5.15.19, v5.15.18, v5.15.17, v5.4.173, v5.15.16, v5.15.15 |
|
#
5b529e8d |
| 14-Jan-2022 |
Thomas Zimmermann <tzimmermann@suse.de> |
drm/dp: Move public DisplayPort headers into dp/
Move all public DisplayPort headers into dp/ and update users. No functional changes.
v3: * rebased onto latest drm-tip
Signed-off-by: Thomas Zimm
drm/dp: Move public DisplayPort headers into dp/
Move all public DisplayPort headers into dp/ and update users. No functional changes.
v3: * rebased onto latest drm-tip
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220114114535.29157-5-tzimmermann@suse.de
show more ...
|
Revision tags: v5.16, v5.15.10, v5.15.9, v5.15.8, v5.15.7, v5.15.6, v5.15.5, v5.15.4, v5.15.3, v5.15.2, v5.15.1, v5.15, v5.14.14, v5.14.13, v5.14.12, v5.14.11, v5.14.10, v5.14.9, v5.14.8, v5.14.7, v5.14.6, v5.10.67, v5.10.66, v5.14.5, v5.14.4, v5.10.65, v5.14.3, v5.10.64, v5.14.2, v5.10.63, v5.14.1, v5.10.62, v5.14, v5.10.61, v5.10.60, v5.10.53, v5.10.52, v5.10.51, v5.10.50, v5.10.49, v5.13, v5.10.46, v5.10.43, v5.10.42, v5.10.41, v5.10.40, v5.10.39, v5.4.119, v5.10.36, v5.10.35, v5.10.34, v5.4.116, v5.10.33, v5.12 |
|
#
6cba3fe4 |
| 23-Apr-2021 |
Lyude Paul <lyude@redhat.com> |
drm/dp: Add backpointer to drm_device in drm_dp_aux
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This
drm/dp: Add backpointer to drm_device in drm_dp_aux
This is something that we've wanted for a while now: the ability to actually look up the respective drm_device for a given drm_dp_aux struct. This will also allow us to transition over to using the drm_dbg_*() helpers for debug message printing, as we'll finally have a drm_device to reference for doing so.
Note that there is one limitation with this - because some DP AUX adapters exist as platform devices which are initialized independently of their respective DRM devices, one cannot rely on drm_dp_aux->drm_dev to always be non-NULL until drm_dp_aux_register() has been called. We make sure to point this out in the documentation for struct drm_dp_aux.
v3: * Add WARN_ON_ONCE() to drm_dp_aux_register() if drm_dev isn't filled out
Signed-off-by: Lyude Paul <lyude@redhat.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210423184309.207645-4-lyude@redhat.com Reviewed-by: Dave Airlie <airlied@redhat.com>
show more ...
|
Revision tags: v5.10.32, v5.10.31, v5.10.30, v5.10.27, v5.10.26, v5.10.25, v5.10.24, v5.10.23, v5.10.22, v5.10.21, v5.10.20, v5.10.19, v5.4.101, v5.10.18 |
|
#
212ee8db |
| 19-Feb-2021 |
Lyude Paul <lyude@redhat.com> |
drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach()
Just another issue I noticed while correcting usages of drm_dp_aux_init()/drm_dp_aux_register() around the tree. If any of th
drm/bridge/analogix/anx78xx: Cleanup on error in anx78xx_bridge_attach()
Just another issue I noticed while correcting usages of drm_dp_aux_init()/drm_dp_aux_register() around the tree. If any of the steps in anx78xx_bridge_attach() fail, we end up leaking resources. So, let's fix that (and fix leaking a DP AUX adapter in the process) by unrolling on errors.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-10-lyude@redhat.com
show more ...
|
#
9962849d |
| 19-Feb-2021 |
Lyude Paul <lyude@redhat.com> |
drm/bridge/analogix/anx78xx: Setup encoder before registering connector
Since encoder mappings for connectors are exposed to userspace, we should be attaching the encoder before exposing the connect
drm/bridge/analogix/anx78xx: Setup encoder before registering connector
Since encoder mappings for connectors are exposed to userspace, we should be attaching the encoder before exposing the connector to userspace. Just a drive-by fix for an issue I noticed while fixing up usages of drm_dp_aux_init()/drm_dp_aux_register() across the tree.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-9-lyude@redhat.com
show more ...
|
#
885373db |
| 19-Feb-2021 |
Lyude Paul <lyude@redhat.com> |
drm/bridge/analogix/anx78xx: Add missing drm_dp_aux_unregister() call
Surprisingly, this bridge actually registers it's AUX adapter at the correct time already. Nice job! However, it does forget to
drm/bridge/analogix/anx78xx: Add missing drm_dp_aux_unregister() call
Surprisingly, this bridge actually registers it's AUX adapter at the correct time already. Nice job! However, it does forget to actually unregister the AUX adapter, so let's add a bridge function to handle that.
Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210219215326.2227596-8-lyude@redhat.com
show more ...
|
Revision tags: v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43 |
|
#
12c683e1 |
| 25-May-2020 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid()
When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An example is th
drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid()
When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An example is the meson dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to perform clock calculations.
Bridges that need the display info currently retrieve it from the drm_connector created by the bridge. This gets in the way of moving connector creation out of bridge drivers. To make this possible, pass the drm_display_info to drm_bridge_funcs .mode_valid().
Changes to the bridge drivers have been performed with the following coccinelle semantic patch and have been compile-tested.
@ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .mode_valid = fn };
@ depends on rule1 @ identifier rule1.fn; identifier bridge; identifier mode; @@ enum drm_mode_status fn( struct drm_bridge *bridge, + const struct drm_display_info *info, const struct drm_display_mode *mode ) { ... }
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part: Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
show more ...
|
Revision tags: v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23 |
|
#
a25b988f |
| 26-Feb-2020 |
Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
drm/bridge: Extend bridge API to disable connector creation
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pre
drm/bridge: Extend bridge API to disable connector creation
Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues:
- It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model.
- It requires every bridge driver to implement similar connector handling code, resulting in code duplication.
- It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver).
In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core).
Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet.
The change is based on the following semantic patch, with manual review and edits.
@ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn };
@ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... }
@ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> }
@@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 )
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
show more ...
|
Revision tags: v5.4.22, v5.4.21 |
|
#
3e138a63 |
| 18-Feb-2020 |
Torsten Duwe <duwe@lst.de> |
drm/bridge: analogix-anx78xx: Fix drm_dp_link helper removal
drm_dp_link_rate_to_bw_code and ...bw_code_to_link_rate simply divide by and multiply with 27000, respectively. Avoid an overflow in the
drm/bridge: analogix-anx78xx: Fix drm_dp_link helper removal
drm_dp_link_rate_to_bw_code and ...bw_code_to_link_rate simply divide by and multiply with 27000, respectively. Avoid an overflow in the u8 dpcd[0] and the multiply+divide alltogether.
Signed-off-by: Torsten Duwe <duwe@lst.de> Fixes: ff1e8fb68ea0 ("drm/bridge: analogix-anx78xx: Avoid drm_dp_link helpers") Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200218155744.9675368BE1@verein.lst.de
show more ...
|
Revision tags: v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9 |
|
#
0712eca9 |
| 29-Oct-2019 |
Icenowy Zheng <icenowy@aosc.io> |
drm/bridge: extract some Analogix I2C DP common code
Some code can be shared within different DP bridges by Analogix. Extract them to analogix_dp.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Sig
drm/bridge: extract some Analogix I2C DP common code
Some code can be shared within different DP bridges by Analogix. Extract them to analogix_dp.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191107135214.966BD68BFE@verein.lst.de
show more ...
|
#
5d97408e |
| 29-Oct-2019 |
Icenowy Zheng <icenowy@aosc.io> |
drm/bridge: move ANA78xx driver to analogix subdirectory
As ANA78xx chips are designed and produced by Analogix Semiconductor, Inc, move their driver codes into analogix subdirectory.
Signed-off-by
drm/bridge: move ANA78xx driver to analogix subdirectory
As ANA78xx chips are designed and produced by Analogix Semiconductor, Inc, move their driver codes into analogix subdirectory.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de
show more ...
|
Revision tags: v5.10.17, v5.11, v5.10.16, v5.10.15, v5.10.14, v5.10, v5.8.17, v5.8.16, v5.8.15, v5.9, v5.8.14, v5.8.13, v5.8.12, v5.8.11, v5.8.10, v5.8.9, v5.8.8, v5.8.7, v5.8.6, v5.4.62, v5.8.5, v5.8.4, v5.4.61, v5.8.3, v5.4.60, v5.8.2, v5.4.59, v5.8.1, v5.4.58, v5.4.57, v5.4.56, v5.8, v5.7.12, v5.4.55, v5.7.11, v5.4.54, v5.7.10, v5.4.53, v5.4.52, v5.7.9, v5.7.8, v5.4.51, v5.4.50, v5.7.7, v5.4.49, v5.7.6, v5.7.5, v5.4.48, v5.7.4, v5.7.3, v5.4.47, v5.4.46, v5.7.2, v5.4.45, v5.7.1, v5.4.44, v5.7, v5.4.43 |
|
#
12c683e1 |
| 25-May-2020 |
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> |
drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid() When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An e
drm: bridge: Pass drm_display_info to drm_bridge_funcs .mode_valid() When validating a mode, bridges may need to do so in the context of a display, as specified by drm_display_info. An example is the meson dw-hdmi bridge that needs to consider the YUV 4:2:0 output format to perform clock calculations. Bridges that need the display info currently retrieve it from the drm_connector created by the bridge. This gets in the way of moving connector creation out of bridge drivers. To make this possible, pass the drm_display_info to drm_bridge_funcs .mode_valid(). Changes to the bridge drivers have been performed with the following coccinelle semantic patch and have been compile-tested. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .mode_valid = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; identifier mode; @@ enum drm_mode_status fn( struct drm_bridge *bridge, + const struct drm_display_info *info, const struct drm_display_mode *mode ) { ... } Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Guido Günther <agx@sigxcpu.org> # for the nwl-dsi part: Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200526011505.31884-11-laurent.pinchart+renesas@ideasonboard.com
show more ...
|
Revision tags: v5.4.42, v5.4.41, v5.4.40, v5.4.39, v5.4.38, v5.4.37, v5.4.36, v5.4.35, v5.4.34, v5.4.33, v5.4.32, v5.4.31, v5.4.30, v5.4.29, v5.6, v5.4.28, v5.4.27, v5.4.26, v5.4.25, v5.4.24, v5.4.23 |
|
#
a25b988f |
| 26-Feb-2020 |
Laurent Pinchart <laurent.pinchart@ideasonboard.com> |
drm/bridge: Extend bridge API to disable connector creation Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and ha
drm/bridge: Extend bridge API to disable connector creation Most bridge drivers create a DRM connector to model the connector at the output of the bridge. This model is historical and has worked pretty well so far, but causes several issues: - It prevents supporting more complex display pipelines where DRM connector operations are split over multiple components. For instance a pipeline with a bridge connected to the DDC signals to read EDID data, and another one connected to the HPD signal to detect connection and disconnection, will not be possible to support through this model. - It requires every bridge driver to implement similar connector handling code, resulting in code duplication. - It assumes that a bridge will either be wired to a connector or to another bridge, but doesn't support bridges that can be used in both positions very well (although there is some ad-hoc support for this in the analogix_dp bridge driver). In order to solve these issues, ownership of the connector should be moved to the display controller driver (where it can be implemented using helpers provided by the core). Extend the bridge API to allow disabling connector creation in bridge drivers as a first step towards the new model. The new flags argument to the bridge .attach() operation allows instructing the bridge driver to skip creating a connector. Unconditionally set the new flags argument to 0 for now to keep the existing behaviour, and modify all existing bridge drivers to return an error when connector creation is not requested as they don't support this feature yet. The change is based on the following semantic patch, with manual review and edits. @ rule1 @ identifier funcs; identifier fn; @@ struct drm_bridge_funcs funcs = { ..., .attach = fn }; @ depends on rule1 @ identifier rule1.fn; identifier bridge; statement S, S1; @@ int fn( struct drm_bridge *bridge + , enum drm_bridge_attach_flags flags ) { ... when != S + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) { + DRM_ERROR("Fix bridge driver to make connector optional!"); + return -EINVAL; + } + S1 ... } @ depends on rule1 @ identifier rule1.fn; identifier bridge, flags; expression E1, E2, E3; @@ int fn( struct drm_bridge *bridge, enum drm_bridge_attach_flags flags ) { <... drm_bridge_attach(E1, E2, E3 + , flags ) ...> } @@ expression E1, E2, E3; @@ drm_bridge_attach(E1, E2, E3 + , 0 ) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200226112514.12455-10-laurent.pinchart@ideasonboard.com
show more ...
|
Revision tags: v5.4.22, v5.4.21 |
|
#
3e138a63 |
| 18-Feb-2020 |
Torsten Duwe <duwe@lst.de> |
drm/bridge: analogix-anx78xx: Fix drm_dp_link helper removal drm_dp_link_rate_to_bw_code and ...bw_code_to_link_rate simply divide by and multiply with 27000, respectively. Avoid an over
drm/bridge: analogix-anx78xx: Fix drm_dp_link helper removal drm_dp_link_rate_to_bw_code and ...bw_code_to_link_rate simply divide by and multiply with 27000, respectively. Avoid an overflow in the u8 dpcd[0] and the multiply+divide alltogether. Signed-off-by: Torsten Duwe <duwe@lst.de> Fixes: ff1e8fb68ea0 ("drm/bridge: analogix-anx78xx: Avoid drm_dp_link helpers") Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200218155744.9675368BE1@verein.lst.de
show more ...
|
Revision tags: v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13, v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7, v5.4.6, v5.4.5, v5.4.4, v5.4.3, v5.3.15, v5.4.2, v5.4.1, v5.3.14, v5.4, v5.3.13, v5.3.12, v5.3.11, v5.3.10, v5.3.9 |
|
#
0712eca9 |
| 29-Oct-2019 |
Icenowy Zheng <icenowy@aosc.io> |
drm/bridge: extract some Analogix I2C DP common code Some code can be shared within different DP bridges by Analogix. Extract them to analogix_dp. Signed-off-by: Icenowy Zheng <
drm/bridge: extract some Analogix I2C DP common code Some code can be shared within different DP bridges by Analogix. Extract them to analogix_dp. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191107135214.966BD68BFE@verein.lst.de
show more ...
|
#
5d97408e |
| 29-Oct-2019 |
Icenowy Zheng <icenowy@aosc.io> |
drm/bridge: move ANA78xx driver to analogix subdirectory As ANA78xx chips are designed and produced by Analogix Semiconductor, Inc, move their driver codes into analogix subdirectory.
drm/bridge: move ANA78xx driver to analogix subdirectory As ANA78xx chips are designed and produced by Analogix Semiconductor, Inc, move their driver codes into analogix subdirectory. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Torsten Duwe <duwe@suse.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de
show more ...
|