Revision tags: v5.4.31, v5.4.30, v5.4.29 |
|
#
a776c270 |
| 30-Mar-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar: "The EFI changes in this cycle are much larger than usual, for two (p
Merge branch 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar: "The EFI changes in this cycle are much larger than usual, for two (positive) reasons:
- The GRUB project is showing signs of life again, resulting in the introduction of the generic Linux/UEFI boot protocol, instead of x86 specific hacks which are increasingly difficult to maintain. There's hope that all future extensions will now go through that boot protocol.
- Preparatory work for RISC-V EFI support.
The main changes are:
- Boot time GDT handling changes
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another)
- Clean up the contents of 'struct efi', and move out everything that doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table.
- Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM.
- Changes to load device firmware from EFI boot service memory regions
- Various documentation updates and minor code cleanups and fixes"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) efi/libstub/arm: Fix spurious message that an initrd was loaded efi/libstub/arm64: Avoid image_base value from efi_loaded_image partitions/efi: Fix partition name parsing in GUID partition entry efi/x86: Fix cast of image argument efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations efi: Fix a mistype in comments mentioning efivar_entry_iter_begin() efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map() efi/x86: Ignore the memory attributes table on i386 efi/x86: Don't relocate the kernel unless necessary efi/x86: Remove extra headroom for setup block efi/x86: Add kernel preferred address to PE header efi/x86: Decompress at start of PE image load address x86/boot/compressed/32: Save the output address instead of recalculating it efi/libstub/x86: Deal with exit() boot service returning x86/boot: Use unsigned comparison for addresses efi/x86: Avoid using code32_start efi/x86: Make efi32_pe_entry() more readable efi/x86: Respect 32-bit ABI in efi32_pe_entry() efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA ...
show more ...
|
#
59838093 |
| 30-Mar-2020 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.7-rc1.
Merge tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.7-rc1.
Nothing huge in here, just lots of little firmware core changes and use of new apis, a libfs fix, a debugfs api change, and some driver core deferred probe rework.
All of these have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits) Revert "driver core: Set fw_devlink to "permissive" behavior by default" driver core: Set fw_devlink to "permissive" behavior by default driver core: Replace open-coded list_last_entry() driver core: Read atomic counter once in driver_probe_done() libfs: fix infoleak in simple_attr_read() driver core: Add device links from fwnode only for the primary device platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet platform/x86: touchscreen_dmi: Add EFI embedded firmware info support Input: icn8505 - Switch to firmware_request_platform for retreiving the fw Input: silead - Switch to firmware_request_platform for retreiving the fw selftests: firmware: Add firmware_request_platform tests test_firmware: add support for firmware_request_platform firmware: Add new platform fallback mechanism and firmware_request_platform() Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking" drivers: base: power: wakeup.c: Use built-in RCU list checking component: allow missing unbind callback debugfs: remove return value of debugfs_create_file_size() debugfs: Check module state before warning in {full/open}_proxy_open() firmware: fix a double abort case with fw_load_sysfs_fallback arch_topology: Fix putting invalid cpu clk ...
show more ...
|
Revision tags: v5.6, v5.4.28, v5.4.27 |
|
#
4445eb6d |
| 20-Mar-2020 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into driver-core-next
Ard writes:
Stable shared branch between EFI and driver tree
Stable
Merge tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into driver-core-next
Ard writes:
Stable shared branch between EFI and driver tree
Stable shared branch to ease the integration of Hans's series to support device firmware loaded from EFI boot service memory regions.
[PATCH v12 00/10] efi/firmware/platform-x86: Add EFI embedded fw support https://lore.kernel.org/linux-efi/20200115163554.101315-1-hdegoede@redhat.com/
* tag 'stable-shared-branch-for-driver-tree' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi: Add embedded peripheral firmware support efi: Export boot-services code and data as debugfs-blobs
show more ...
|
Revision tags: v5.4.26, v5.4.25 |
|
#
2fb2c179 |
| 08-Mar-2020 |
Masahiro Yamada <masahiroy@kernel.org> |
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
drivers/firmware/efi/libstub/Makefile builds a static library, which is not linked into the main vmlinux target in the ordinary way [arm64
efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux
drivers/firmware/efi/libstub/Makefile builds a static library, which is not linked into the main vmlinux target in the ordinary way [arm64], or at all [ARM, x86].
Since commit:
7f2084fa55e6 ("[kbuild] handle exports in lib-y objects reliably")
any Makefile using lib-y generates lib-ksyms.o which is linked into vmlinux.
In this case, the following garbage object is linked into vmlinux.
drivers/firmware/efi/libstub/lib-ksyms.o
We do not want to follow the default linking rules for static libraries built under libstub/ so using subdir-y instead of obj-y is the correct way to descend into this directory.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> [ardb: update commit log to clarify that arm64 deviates in this respect] Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20200305055047.6097-1-masahiroy@kernel.org Link: https://lore.kernel.org/r/20200308080859.21568-23-ardb@kernel.org
show more ...
|
#
3be5f0d2 |
| 08-Mar-2020 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI updates for v5.7
- Incorporate a stable branch with the EFI pieces of Hans's work on loading
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
More EFI updates for v5.7
- Incorporate a stable branch with the EFI pieces of Hans's work on loading device firmware from EFI boot service memory regions
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
Revision tags: v5.4.24, v5.4.23, v5.4.22, v5.4.21, v5.4.20, v5.4.19, v5.4.18, v5.4.17, v5.4.16, v5.5, v5.4.15, v5.4.14, v5.4.13 |
|
#
f0df68d5 |
| 15-Jan-2020 |
Hans de Goede <hdegoede@redhat.com> |
efi: Add embedded peripheral firmware support
Just like with PCI options ROMs, which we save in the setup_efi_pci* functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself sometime
efi: Add embedded peripheral firmware support
Just like with PCI options ROMs, which we save in the setup_efi_pci* functions from arch/x86/boot/compressed/eboot.c, the EFI code / ROM itself sometimes may contain data which is useful/necessary for peripheral drivers to have access to.
Specifically the EFI code may contain an embedded copy of firmware which needs to be (re)loaded into the peripheral. Normally such firmware would be part of linux-firmware, but in some cases this is not feasible, for 2 reasons:
1) The firmware is customized for a specific use-case of the chipset / use with a specific hardware model, so we cannot have a single firmware file for the chipset. E.g. touchscreen controller firmwares are compiled specifically for the hardware model they are used with, as they are calibrated for a specific model digitizer.
2) Despite repeated attempts we have failed to get permission to redistribute the firmware. This is especially a problem with customized firmwares, these get created by the chip vendor for a specific ODM and the copyright may partially belong with the ODM, so the chip vendor cannot give a blanket permission to distribute these.
This commit adds support for finding peripheral firmware embedded in the EFI code and makes the found firmware available through the new efi_get_embedded_fw() function.
Support for loading these firmwares through the standard firmware loading mechanism is added in a follow-up commit in this patch-series.
Note we check the EFI_BOOT_SERVICES_CODE for embedded firmware near the end of start_kernel(), just before calling rest_init(), this is on purpose because the typical EFI_BOOT_SERVICES_CODE memory-segment is too large for early_memremap(), so the check must be done after mm_init(). This relies on EFI_BOOT_SERVICES_CODE not being free-ed until efi_free_boot_services() is called, which means that this will only work on x86 for now.
Reported-by: Dave Olsthoorn <dave@bewaar.me> Suggested-by: Peter Jones <pjones@redhat.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200115163554.101315-3-hdegoede@redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
show more ...
|
#
e9765680 |
| 26-Feb-2020 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is muc
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/core
Pull EFI updates for v5.7 from Ard Biesheuvel:
This time, the set of changes for the EFI subsystem is much larger than usual. The main reasons are:
- Get things cleaned up before EFI support for RISC-V arrives, which will increase the size of the validation matrix, and therefore the threshold to making drastic changes,
- After years of defunct maintainership, the GRUB project has finally started to consider changes from the distros regarding UEFI boot, some of which are highly specific to the way x86 does UEFI secure boot and measured boot, based on knowledge of both shim internals and the layout of bootparams and the x86 setup header. Having this maintenance burden on other architectures (which don't need shim in the first place) is hard to justify, so instead, we are introducing a generic Linux/UEFI boot protocol.
Summary of changes:
- Boot time GDT handling changes (Arvind)
- Simplify handling of EFI properties table on arm64
- Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc.
- Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree.
- Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another)
- Clean up the contents of struct efi, and move out everything that doesn't need to be stored there.
- Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table.
- Various documentation updates and minor code cleanups (Heinrich)
- Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM. Note that these patches were deliberately put at the beginning so they can be used as a stable branch that will be shared with a PR containing the complete fix, which I will send to the ARM tree.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
show more ...
|
#
ac5abc70 |
| 18-Feb-2020 |
Ard Biesheuvel <ardb@kernel.org> |
efi/arm: Move FDT param discovery code out of efi.c
On ARM systems, we discover the UEFI system table address and memory map address from the /chosen node in the device tree, or in the Xen case, fro
efi/arm: Move FDT param discovery code out of efi.c
On ARM systems, we discover the UEFI system table address and memory map address from the /chosen node in the device tree, or in the Xen case, from a similar node under /hypervisor.
Before making some functional changes to that code, move it into its own file that only gets built if CONFIG_EFI_PARAMS_FROM_FDT=y.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
show more ...
|
#
c95baf12 |
| 20-Feb-2020 |
Zhenyu Wang <zhenyuw@linux.intel.com> |
Merge drm-intel-next-queued into gvt-next
Backmerge to pull in https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
|
Revision tags: v5.4.12, v5.4.11, v5.4.10, v5.4.9, v5.4.8, v5.4.7 |
|
#
28336be5 |
| 30-Dec-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts
Conflicts: init/main.c lib/Kconfig.debug
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
b19efcab |
| 31-Jan-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.6 merge window.
|
#
1bdd3e05 |
| 10-Jan-2020 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.5-rc5' into next
Sync up with mainline to get SPI "delay" API changes.
|
#
22164fbe |
| 06-Jan-2020 |
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> |
Merge drm/drm-next into drm-misc-next
Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
Revision tags: v5.4.6, v5.4.5, v5.4.4, v5.4.3 |
|
#
023265ed |
| 11-Dec-2019 |
Jani Nikula <jani.nikula@intel.com> |
Merge drm/drm-next into drm-intel-next-queued
Sync up with v5.5-rc1 to get the updated lock_release() API among other things. Fix the conflict reported by Stephen Rothwell [1].
[1] http://lore.kern
Merge drm/drm-next into drm-intel-next-queued
Sync up with v5.5-rc1 to get the updated lock_release() API among other things. Fix the conflict reported by Stephen Rothwell [1].
[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
show more ...
|
#
2040cf9f |
| 10-Dec-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.5-rc1' into core/kprobes, to resolve conflicts
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
4f797f56 |
| 08-Dec-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge branch 'linus' into sched/urgent, to pick up the latest before merging new patches
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
942e6f8a |
| 05-Dec-2019 |
Olof Johansson <olof@lixom.net> |
Merge mainline/master into arm/fixes
This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johans
Merge mainline/master into arm/fixes
This brings in the mainline tree right after armsoc contents was merged this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
show more ...
|
Revision tags: v5.3.15, v5.4.2, v5.4.1, v5.3.14 |
|
#
6e9f8796 |
| 26-Nov-2019 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 2
Merge tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20191018, add support for EFI specific purpose memory, update the ACPI EC driver to make it work on systems with hardware-reduced ACPI, improve ACPI-based device enumeration for some platforms, rework the lid blacklist handling in the button driver and add more lid quirks to it, unify ACPI _HID/_UID matching, fix assorted issues and clean up the code and documentation.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20191018 including: * Fixes for Clang warnings (Bob Moore) * Fix for possible overflow in get_tick_count() (Bob Moore) * Introduction of acpi_unload_table() (Bob Moore) * Debugger and utilities updates (Erik Schmauss) * Fix for unloading tables loaded via configfs (Nikolaus Voss)
- Add support for EFI specific purpose memory to optionally allow either application-exclusive or core-kernel-mm managed access to differentiated memory (Dan Williams)
- Fix and clean up processing of the HMAT table (Brice Goglin, Qian Cai, Tao Xu)
- Update the ACPI EC driver to make it work on systems with hardware-reduced ACPI (Daniel Drake)
- Always build in support for the Generic Event Device (GED) to allow one kernel binary to work both on systems with full hardware ACPI and hardware-reduced ACPI (Arjan van de Ven)
- Fix the table unload mechanism to unregister platform devices created when the given table was loaded (Andy Shevchenko)
- Rework the lid blacklist handling in the button driver and add more lid quirks to it (Hans de Goede)
- Improve ACPI-based device enumeration for some platforms based on Intel BayTrail SoCs (Hans de Goede)
- Add an OpRegion driver for the Cherry Trail Crystal Cove PMIC and prevent handlers from being registered for unhandled PMIC OpRegions (Hans de Goede)
- Unify ACPI _HID/_UID matching (Andy Shevchenko)
- Clean up documentation and comments (Cao jin, James Pack, Kacper Piwiński)"
* tag 'acpi-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (52 commits) ACPI: OSI: Shoot duplicate word ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device ACPI: NUMA: HMAT: Register HMAT at device_initcall level device-dax: Add a driver for "hmem" devices dax: Fix alloc_dax_region() compile warning lib: Uplevel the pmem "region" ida to a global allocator x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP arm/efi: EFI soft reservation to memblock x86/efi: EFI soft reservation to E820 enumeration efi: Common enable/disable infrastructure for EFI soft reservation x86/efi: Push EFI_MEMMAP check into leaf routines efi: Enumerate EFI_MEMORY_SP ACPI: NUMA: Establish a new drivers/acpi/numa/ directory ACPICA: Update version to 20191018 ACPICA: debugger: remove leading whitespaces when converting a string to a buffer ACPICA: acpiexec: initialize all simple types and field units from user input ACPICA: debugger: add field unit support for acpi_db_get_next_token ...
show more ...
|
#
782b5971 |
| 26-Nov-2019 |
Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
Merge branch 'acpi-mm'
* acpi-mm: ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target pro
Merge branch 'acpi-mm'
* acpi-mm: ACPI: HMAT: use %u instead of %d to print u32 values ACPI: NUMA: HMAT: fix a section mismatch ACPI: HMAT: don't mix pxm and nid when setting memory target processor_pxm ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device ACPI: NUMA: HMAT: Register HMAT at device_initcall level device-dax: Add a driver for "hmem" devices dax: Fix alloc_dax_region() compile warning lib: Uplevel the pmem "region" ida to a global allocator x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP arm/efi: EFI soft reservation to memblock x86/efi: EFI soft reservation to E820 enumeration efi: Common enable/disable infrastructure for EFI soft reservation x86/efi: Push EFI_MEMMAP check into leaf routines efi: Enumerate EFI_MEMORY_SP ACPI: NUMA: Establish a new drivers/acpi/numa/ directory
show more ...
|
#
976e3645 |
| 25-Nov-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge branch 'next' into for-linus
Prepare input updates for 5.5 merge window.
|
Revision tags: v5.4, v5.3.13, v5.3.12 |
|
#
9f4813b5 |
| 19-Nov-2019 |
Ingo Molnar <mingo@kernel.org> |
Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
#
ac94be49 |
| 15-Nov-2019 |
Thomas Gleixner <tglx@linutronix.de> |
Merge branch 'linus' into x86/hyperv
Pick up upstream fixes to avoid conflicts.
|
Revision tags: v5.3.11, v5.3.10 |
|
#
199c8471 |
| 06-Nov-2019 |
Dan Williams <dan.j.williams@intel.com> |
x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
Given that EFI_MEMORY_SP is platform BIOS policy decision for marking memory ranges as "reserved for a specific purpose" there will inevitably be
x86/efi: Add efi_fake_mem support for EFI_MEMORY_SP
Given that EFI_MEMORY_SP is platform BIOS policy decision for marking memory ranges as "reserved for a specific purpose" there will inevitably be scenarios where the BIOS omits the attribute in situations where it is desired. Unlike other attributes if the OS wants to reserve this memory from the kernel the reservation needs to happen early in init. So early, in fact, that it needs to happen before e820__memblock_setup() which is a pre-requisite for efi_fake_memmap() that wants to allocate memory for the updated table.
Introduce an x86 specific efi_fake_memmap_early() that can search for attempts to set EFI_MEMORY_SP via efi_fake_mem and update the e820 table accordingly.
The KASLR code that scans the command line looking for user-directed memory reservations also needs to be updated to consider "efi_fake_mem=nn@ss:0x40000" requests.
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
show more ...
|
Revision tags: v5.3.9, v5.3.8 |
|
#
728d90bd |
| 27-Oct-2019 |
Dmitry Torokhov <dmitry.torokhov@gmail.com> |
Merge tag 'v5.4-rc5' into next
Sync up with mainline.
|
#
112d6212 |
| 18-Oct-2019 |
Mark Brown <broonie@kernel.org> |
Merge tag 'v5.4-rc3' into spi-5.4
Linux 5.4-rc3
|